Extension of sound field reconstruction based on element radiation superposition method in a sparsity framework

Nearfield acoustic holography(NAH)is a powerful tool for realizing source identification and sound field reconstruction.The wave superposition(WS)-based NAH is appropriate for the spatially extended sources and does not require the complex numerical integrals.Equivalent source method(ESM),as a classical WS approach,is widely used due to its simplicity and efficiency.In the ESM,a virtual source surface is introduced,on which the virtual point sources are taken as the assumed sources,and an optimal retreat distance needs to be considered.A newly proposed WS-based approach,the element radiation superposition method(ERSM),uses piston surface source as the assumed source with no need to choose a virtual source surface.To satisfy the application conditions of piston pressure formula,the sizes of pistons are assumed to be as small as possible,which results in a large number of pistons and sampling points.In this paper,transfer matrix modes(TMMs),which are composed of the singular vectors of the vibro-acoustic transfer matrix,are used as the sparse basis of piston normal velocities.Then,the compressive ERSM based on TMMs is proposed.Compared with the conventional ERSM,the proposed method maintains a good pressure reconstruction when the number of sampling points and pistons are both reduced.Besides,the proposed method is compared with the compressive ESM in a mathematical sense.Both simulations and experiments for a rectangular plate demonstrate the advantage of the proposed method over the existing methods.

Observation of selective surface element substitution in FeTe_(0.5)Se_(0.5) superconductor thin film exposed to ambient air by synchrotron radiation spectroscopy

A systematic investigation of oxidation on a superconductive Fe Te_（0.5）Se_（0.5）thin film,which was grown on Nb-doped SrTiO_3（001） by pulsed laser deposition,has been carried out.The sample was exposed to ambient air for one month for oxidation.Macroscopically,the exposed specimen lost its superconductivity due to oxidation.The specimen was subjected to in situ synchrotron radiation photoelectron spectroscopy（PES） and x-ray absorption spectroscopy（XAS） measurements following cycles of annealing and argon ion etching treatments to unravel what happened in the electronic structure and composition after exposure to air.By the spectroscopic measurements,we found that the as-grown FeTe_（0.5）Se_（0.5）superconductive thin film experienced an element selective substitution reaction.The oxidation preferentially proceeds through pumping out the Te and forming Fe–O bonds by O substitution of Te.In addition,our results certify that in situ vacuum annealing and low-energy argon ion etching methods combined with spectroscopy are suitable for depth element and valence analysis of layered structure superconductor materials.

Radioprotective effects of the expression of FLT3 ligand regulated by Egr-1 regulated element on radiation injury of SCID mice

Objective: In order to explore the radioprotective effects of the expression of hematopoietic growth factors regulated by radio-inducible promoter on radiation injury. Methods:The human FL (Flt3 ligand) cDNA and EGFP (enhanced green fluorescent protein) cDNA were linked together with IRES and then inserted into the eukaryotic expression vector pCI-Egr, which was constructed by substituting CMV promoter in pCIneo with the Egr-1 promoter (Egr-EF). The vector was transferred into human bone marrow stromal ...

NUMERICAL SIMULATION OF SOUND RADIATION ON GEARBOX'S HOUSING

The fluid-structure coupling finite element model and the boundary element model of a complex gearbox＇s housing are built based on the theory of fluid-structure coupling finite element method and boundary element method. At the same time, the exciting forces of the housing are analyzed and applied to the finite element models. Firstly, vibration of the housing is calculated by the fluid-structure coupling finite element model; secondly, the calculated result is verified by the experiment; finally, sound radiation of the housing is calculated by the boundary element. According to the calculated results, the housing adds some ribs not only to increase the strength, but also to reduce the sound radiation of the housing. At last, the sound radiation of the modified housing is calculated, which shows that the sound radiation of the modified housing with ribs is lower.

Triple-Band Circularly Polarized Dielectric Resonator Antenna (DRA) for Wireless Applications

This paper proposes a new dielectric resonator antenna(DRA)design that can generate circularly polarized(CP)triple-band signals.Atripleband CP DRA antenna fed by a probe feed system is achieved with metal strips structure on side of DRA structure.The design start with conventional rectangular DRA with F shaped metal strips on DRA structure alongside the feed.Then,the F metal strip is enhanced by extending the length of the metal strip to obtain wider impedance bandwidth.Further improvement on the antenna performance is observed by improvised the conventional DRA structure.The method of removing part of DRA bottom resulted to higher antenna gain with triple band CP.The primary features of the proposed DRA include wide impedance matching bandwidth(BW)and broadband circular polarization(CP).The primary features of the proposedDRAinclude wide impedance matching bandwidth(BW)and broadband circular polarization(CP).The CP BW values recorded by the proposed antenna were∼11.27%(3.3–3.65 GHz),12.18%(4.17–4.69 GHz),and 1.74%(6.44–6.55 GHz)for impedance-matching BW values of 35.4%(3.3–4.69 GHz),1.74%(5.36–5.44 GHz),and 1.85%(6.41–6.55 GHz)with peak gains of 6.8 dBic,7.6 dBic,and 8.5 dBic,respectively,in the lower,central,and upper bands.The prototype of the proposed antenna geometry was fabricated and measured.A good agreement was noted between the simulated and the measured results.

Analysis of electrical performances of planar active phased array antennas with distorted array plane

The influence of the distorted plane of the active phased array antenna on the electromagnetic performance is of great significance to the research on and development of the high-performance antennas. On the bent and bowl-shape distortion, the model is established of the relationship between the electromagnetic performance and the position error of the radiated elements. The method is presented of analyzing the far-field pattern of the distorted rectangular active phased array antenna. The analysis results of a planar phased array antenna with different distortions grades prove the validity of the model. Therefore, by the method, the antenna designers may set the reasonable requirement on the structural tolerance in manufacturing antenna.

THE COUPLING METHOD OF FINITE ELEMENTS AND BOUNDARY ELEMENTS FOR RADIATION PROBLEM

The paper presents the variational formulation and well posedness of the coupling method offinite elements and boundary elements for radiation problem. The convergence and optimal errorestimate for the approximate solution and numerical experiment are provided.