Mechanical Behavior Based on Aggregates Microstructure of Ultra-high Performance Concrete

We developed ultra-high performance concrete(UHPC)incorporating mullite sand and brown corundum sand(BCS),and the quartz sand UHPC was utilized to prepare for comparison.The properties of compressive strength,elastic modulus,ultrasonic pulse velocity,flexural strength,and toughness were investigated.Scanning electron microscopy and nanoindentation were also conducted to reveal the underlying mechanisms affecting macroscopic performance.Due to the superior interface bonding properties between mullite sand and matrix,the compressive strength and flexural toughness of UHPC have been significantly improved.Mullite sand and BCS aggregates have higher stiffness than quartz sand,contributing to the excellent elastic modulus exhibited by UHPC.The stiffness and volume of aggregates have a more significant impact on the elastic modulus of UHPC than interface performance,and the latter contributes more to the strength of UHPC.This study will provide a reference for developing UHPC with superior elastic modulus for structural engineering.

Effect of Shrinkage Reducing Agent and Steel Fiber on the Fluidity and Cracking Performance of Ultra-High Performance Concrete

Due to the low water-cement ratio of ultra-high-performance concrete(UHPC),fluidity and shrinkage cracking are key aspects determining the performance and durability of this type of concrete.In this study,the effects of different types of cementitious materials,chemical shrinkage-reducing agents(SRA)and steel fiber(SF)were assessed.Compared with M2-UHPC and M3-UHPC,M1-UHPC was found to have better fluidity and shrinkage cracking performance.Moreover,different SRA incorporation methods,dosage and different SF types and aspect ratios were implemented.The incorporation of SRA and SF led to a decrease in the fluidity of UHPC.SRA internal content of 1%(NSRA-1%),SRA external content of 1%(WSRA-1%),STS-0.22 and STE-0.7 decreased the fluidity of UHPC by 3.3%,8.3%,9.2%and 25%,respectively.However,SRA and SF improved the UHPC shrinkage cracking performance.NSRA-1%and STE-0.7 reduced the shrinkage value of UHPC by 40%and 60%,respectively,and increased the crack resistance by 338%and 175%,respectively.In addition,the addition of SF was observed to make the microstructure of UHPC more compact,and the compressive strength and flexural strength of 28 d were increased by 26.9%and 19.9%,respectively.

Influence Mechanism of Curing Regimes on Interfacial Transition Zone of Lightweight Ultra-High Performance Concrete

This study aims to clarify the effects of curing regimes and lightweight aggregate(LWA)on the morphology, width and mechanical properties of the interfacial transition zone(ITZ) of ultra-high performance concrete(UHPC), and provide reference for the selection of lightweight ultra-high performance concrete(L-UHPC) curing regimes and the pre-wetting degree LWA. The results show that, under the three curing regimes(standard curing, steam curing and autoclaved curing), LWA is tightly bound to the matrix without obvious boundaries. ITZ width increases with the water absorption of LWA and decreases with increasing curing temperature. The ITZ microhardness is the highest when water absorption is 3%, and the microhardness value is more stable with the distance from LWA. Steam and autoclaved curing increase ITZ microhardness compared to standard curing. As LWA pre-wetting and curing temperatures increase, the degree of hydration at the ITZ increases, generating high-density CSH(HD CSH) and ultra-high-density CSH(UHD CSH), and reducing unhydrated particles in ITZ. ITZ micro-mechanical properties are optimized due to hydration products being denser.

Design of Eco-friendly Ultra-high Performance Concrete with Supplementary Cementitious Materials and Coarse Aggregate

Aiming to investigate the mix design of eco-friendly UHPC with supplementary cementitious materials and coarser aggregates, we comprehensively studied the workability, microstructure, porosity, compressive strength, flexural strength, and Young’s modulus of UHPC. Relationship between compressive strength and Young’s modulus was obtained eventually. It is found that the compressive strength, flexural strength, and Young’s modulus of UHPC increase by 19.01%, 10.81%, and 5.99%, respectively, when 40 wt% cement is replaced with supplementary cementitious materials. The relationship between compressive strength and Young’s modulus of UHPC is an exponential form.

Preparation of Heavyweight Ultra-high Performance Concrete Using Barite Sand and Titanium-rich Heavy Slag Sand

The heavyweight ultra-high performance concrete(HUHPC)was prepared with barite sand partially replaced by titanium-rich heavy slag sand(THS)at replacement proportion of 0%,30%,50%,70%and 100%in this work.The results show that THS incorporation can effectively improve the mechanical properties and reduce the volume shrinkage of HUHPC.The HUHPC with 50%THS replacement reaches an apparent density of 2890 kg/m^(3)(for fresh HUHPC),28 d compressive strength of 129 MPa,28 d flexural strength of 23 MPa,28 d flexural toughness of 28.4,56 d volume shrinkage of 359×10^(-4) and,as expected,excellent durability.Microstructural investigation demonstrates that the internal curing of pre-wetted THS promotes the hydration of the surrounding cement paste thereby strengthening the interfacial transition zone,resulting in the“hard shell”formation around aggregate to“protect”the aggregate.Additionally,the“pin structure”significantly improves the cement paste-aggregate interfacial connection.The combination of“hard shell protection”and“pin structure”remarkably improve the mechanical properties of HUHPC produced with porous THS aggregate.

Dynamic Mechanical Behaviour of Ultra-high Performance Fiber Reinforced Concretes

Ultra-high performance fiber reinforced concretes （UHPFRC） were prepared by replacing 60% of cement with ultra-fine industrial waste powder. The dynamic mechanical behaviour of UHPFRC with different fiber volume fraction was researched on repeated compressive impact in four kinds of impact modes through split Hopkinson pressure bar （SHPB）. The experimental results show that the peak stress and elastic modulus decrease and the strain rate and peak strain increase gradually with the increasing of impact times. The initial material damage increases and the peak stress of the specimen decreases from the second impact with the increasing of the initial incident wave. Standard strength on repeated impact is defined to compare the ability of resistance against repeated impact among different materials. The rate of reduction of standard strength is decreased by fiber reinforcement under repeated impact. The material damage is reduced and the ability of repeated impact resistance of UHPFRC is improved with the increasing of fiber volume fraction.

Different Curing Systems on Mechanical Properties of Ultra-High Performance Concrete with Coarse Aggregate

High durability and high tensile strength makes ultra-high performance concrete( UHPC) an ideal material for bridges,while its early shrinkage in the construction of cast-in-situ mass concrete leads structure crack-easily,which restricts the application of UHPC in deck system. Whether reasonable amount of coarse aggregate can influence the strength of UHPC and improve the shrinkage performance or reduce the cost is still in doubt. Besides,in order to improve its constructability and workability, whether autoclaved curing system of UHPC can be changed remains to be further researched. In response to these circumstances, a systematic experimental study on the strength of UHPC mixed with coarse aggregate in different ratios has been presented in this paper. The three curing systems,namely standard curing,180-200 ℃/1. 1 MPa autoclaved curing,and hot water curing were tested to reveal the relationship between UHPC's properties and curing systems,and the UHPC ' s microstructure was also preliminarily studied by scanning electron microscope( SEM). The experimental research can draw the following conclusions. Under the condition of the same mix ratio, autoclaved curing guarantees the highest compressive strength,followed by hot water curing and standard curing. The compressive strength of concrete increases with the temperature in the range of 25 to 90 ℃ hot water curing,and high temperature in precuring period can speed up the strength development of UHPC,but the sequence of precuring period does not obviously affect the results. In 90 ℃ hot water and autoclaved curing,the strength is over 150 MPa,and it has little relation with gravel ratio. While the value increases first and then decreases in a lower temperature curing with the increasing of gravel amount,even only about 80 MPa at room temperature. The strength increases moderately along with the increase of the curing age by standard curing,especially in the initial stage.

Automatic detection and assessment of crack development in ultra-high performance concrete in the spatial and Fourier domains

Automatic detection and assessment of surface cracks are beneficial for understanding the mechanical performance of ultra-high performance concrete(UHPC).This study detects crack evolution using a novel dynamic mode decomposition(DMD)method.In this method,the sparse matrix‘determined’from images is used to reconstruct the foreground that contains cracks,and the global threshold method is adopted to extract the crack patterns.The application of the DMD method to the three-point bending test demonstrates the efficiency in inspecting cracks with high accuracy.Accordingly,the geometric features,including the area and its projection in two major directions,are evaluated over time.The relationship between the geometric properties of cracks and load-displacement curves of UHPC is discussed.Due to the irregular shape of cracks in the spatial domain,the cracks are then transformed into the Fourier domain to assess their development.Results indicate that crack patterns in the Fourier domain exhibit a distinct concentration around a central position.Moreover,the power spectral density of cracks exhibits an increasing trend over time.The investigation into crack evolution in both the spatial and Fourier domains contributes significantly to elucidating the mechanical behavior of UHPC.

A comparative study for the impact performance of shaped charge JET on UHPC targets

With the development of two-stage munitions(a precursor shaped charge(SC)and a following kinetic energy projectile)to attack the hard concrete targets,as well as the increasing applications of ultra-high performance concrete(UHPC)in both civil and military protective structures,a comparative study on the impact performance of SC formed jet on UHPC target is performed experimentally and numerically at present.Firstly,a series of jet penetration/perforation test on the UHPC,45# steel and UHPC/45# steel composite targets are conducted.By assessing the penetration depth and borehole(crater and tunnel)diameter,the influences of target material and configuration as well as the standoff distance of SC on the impact performance of jet are experimentally discussed.Then,by adopting the 2 D multi-material Arbitrary Lagrange-Euler(ALE)algorithm,Fluid-Structure Interaction(FSI)method and erosion algorithm implemented in the finite element code LS-DYNA,the formation and impact performance of jet in the present test are well reproduced.Finally,based on the validated numerical algorithms,constitutive models and the corresponding parameters,the influences of target material(UHPC,NSC and 45# steel),standoff distance,target configuration(stacked and spaced)and weight efficiency on the impact performance of jet are further discussed.The derived conclusions could provide helpful references for evaluating the ballistic performance of jet and designing the protective structures.

A Study on the Flexural Performance of UHPC Precast Deck-Joint Interface by the Exposure of Steel Fiber

As a solution against the serviceability problem caused by the cracks occurring at the UHPC precast deck-joint interface, this study proposes a method exposing the steel fiber at the interface and evaluates the corresponding flexural performance of the lap spliced construction joint. After having slowed down the strength development of the concrete placed in the joint of the precast deck by means of a curing retardant, the concrete at the interface is crushed so as to expose the steel fibers and the change in the flexural performance is observed experimentally according to the exposure of the steel fibers. The results show that, even if the ultimate strength and stiffness of the UHPC precast deck including the joint are mostly determined by the arrangement details of the rebar lap splice, the exposure of the steel fibers can secure stable ductile behavior and reduce the width of the cracks generated at the precast deck-joint interface under service load.

Behavior and strength of headed stud shear connectors in ultra-high performance concrete of composite bridges

This study presents an experimental and numerical investigation on the static behavior of headed stud shear connectors in ultra-high performance concrete (UHPC) of composite bridges. Four push-out specimens were tested. It was found that no cracking, crushing or splitting was observed on the concrete slab, indicating that UHPC slab exhibited good performance and could resist the high force transferred from the headed studs. The numerical and experimental results indicated that the shear capacity is supposed to be composed of two parts stud shank shear contribution and concrete wedge block shear contribution. The stiffness increment of a stud in UHPC was at least 60% higher than that in normal strength concrete. Even if the stud height was reduced from 6d to 2d, there was no reduction in the shear strength of a stud. Short stud shear connectors with an aspect ratio as small as 2 could develop full strength in UHPC slabs. An empirical load-slip equation taking into account stud diameter was proposed to predict the load-slip response of a stud. The reliability and accuracy of the proposed load-slip equation was verified by the experimental and numerical load-slip curves.

集中配筋连接预制剪力墙抗震性能试验研究

针对现有预制混凝土剪力墙接缝施工容错率低、混凝土现场浇筑作业量大和钢筋锚固过长等不足,提出一种使用超高性能混凝土(UHPC)的集中配筋连接预制剪力墙。通过对比1片现浇剪力墙试件、3片不同接缝形式的集中配筋连接预制剪力墙试件的拟静力试验结果,揭示该类预制剪力墙的破坏规律和抗震性能、竖缝对墙体抗震性能的影响和连接钢筋的受力特点。采用ABAQUS软件对试件进行有限元模拟,分析轴压比和集中配筋率对试件抗震性能的影响。研究结果表明:预制试件与现浇试件具有相同的破坏规律,均为弯剪破坏;这2类试件的滞回曲线均较饱满,骨架曲线走势基本一致,耗能能力接近,且预制试件的最小承载力仅比现浇试件低5.6%,表明预制试件的抗震性能与现浇试件的抗震性能基本相同;竖缝对剪力墙承载力的影响较小,使剪力墙的延性和耗能能力有一定的削弱;不同竖缝形式预制墙的抗震性能相近但各有特点,竖缝形式预制墙采用UHPC出筋搭接具有更好的整体性,采用U形键槽的预制墙具有更大的刚度和更强的耗能能力;连接钢筋的应力分布具有典型受弯构件的特征;随着轴压比增加,模型的刚度和承载力不断增加,在轴压比从0.05增加到0.30时,最大的峰值荷载增幅发生在轴压比从0.05到0.10时,从承载力的提高、刚度、耗能和墙角抬高等方面考虑,试件的集中配筋率保持在90%~110%为宜。

Analysis of Compressive Strength Development of Ultra-high Performance Concrete

A numerical procedure was presented for evaluating the compressive strength development of ultra-high performance concrete(UHPC) with cement-silica fume-slag binder.This numerical procedure started with initial packing behavior of designed UHPC using a random sequential packing method.Furthermore,synergistic effect of combined mineral admixtures was addressed with respect to hydration heat.Accordingly,hydration degree of cement and reaction degrees of mineral admixtures were determined based on a blended cement hydration model.Finally,a compressive strength evolution model was proposed and the evolution of compressive strength of three mixes with different binder recipes was compared.The results showed that the both initial packing behavior of UHPC mixes and synergistic effect of mineral admixtures are critical for predicting the properties of UHPC.A remarkable void fraction of 0.2042 was observed for UHPC mix designed by optimization algorithms under random packing.Furthermore,a negative synergistic effect of the combination of silica fume and slag was obtained with regarding to compressive strength.In addition,for a given mineral admixture replacement of 20%,the formulation of mineral admixture should be carefully tailored where the UHPC incorporating 5%silica fume and 15%slag shows the highest compressive strength.

Analysis and Prediction Model Reinforced UHPC Shrinkage Property

This paper explores the shrinkage of reinforced UHPC under high-temperature steam curing and natural curing conditions.The results are compared with the existing shrinkage prediction models.The results show that the maximum shrinkage strain of reinforced UHPC after steam curing is 164μεand gradually becomes zero.As for natural curing,the maximum shrinkage strain is 173μεand the value stabilizes on the 10th day after pouring.This indicated that steam curing can significantly reduce shrinkage time.Compared with the plain UHPC tested in the previous literature,the structural reinforcement can significantly inhibit the UHPC shrinkage and greatly reduce the risk of cracking due to shrinkage.By comparing the results in this paper with the existing models for predicting the shrinkage strain development,it is found that the formula recommended in the French UHPC structural and technical specification is suitable for the shrinkage curve in the present paper.

钢-UHPC组合板栓钉抗剪承载力、滑移与刚度计算

钢-Ultra-high performance concrete(UHPC)组合桥面板在大跨桥梁中具有较多应用,栓钉连接件对其组合作用的发挥起关键作用。为探究钢-UHPC组合板中栓钉抗剪性能,开展了6个栓钉抗剪推出试验,收集了6种抗剪承载力计算方法、5种抗剪滑移预测模型和10种抗剪刚度计算方法,根据试验结果分别进行计算分析。试验结果表明:所有试件中的栓钉均表现为焊缝与根部交界处剪断,UHPC板除在栓钉根部位置出现局部破损外,基本保持完好;栓钉的抗剪滑移曲线经历弹性、弹塑性和下降3个阶段;所有试件最大滑移量均小于3.5 mm,可取0.1 mm作为弹性极限滑移量。计算结果表明:现有部分规范计算UHPC中栓钉抗剪承载力时不考虑焊缝影响,计算结果偏低,根据该文2组试验数据和收集29组有效数据,提出考虑焊缝影响的计算式,建议UHPC中栓钉焊缝贡献系数取1.1;不同抗剪滑移模型预测结果差异大,建议采用反比例函数形式的模型预测,较为精确;栓钉的抗剪刚度取值由于未考虑栓钉实际处于受力状态,计算结果差异大,建议取滑移量0.1 mm对应的刚度作为弹性抗剪刚度;建立了栓钉抗剪滑移模型与抗剪刚度的关系式,在缺少试验数据时可为近似计算提供参考。

超高性能混凝土钢纤维-基体界面黏结性能研究综述

超高性能混凝土(UHPC)是一种相对较新的水泥混凝土复合材料,由于其优异的机械强度和耐久性,在基础设施建设中具有巨大的应用潜力。钢纤维与基体的界面黏结性能是决定UHPC其他力学性能的主要因素,包括抗拉、抗折、抗压强度和破坏模式(断裂行为)。本文通过讨论并比较多种纤维拉拔测试方法和分析模型,全面综述了UHPC的纤维-基体黏结行为的研究进展;详细确定并讨论了影响纤维-基体黏结的参数,包括纤维的几何形状和方向、表面处理、基体的组成和强度。最后,基于现有研究,对未来UHPC增强方法和测试细节提出了建议。

Conceptual Design of Hybrid Cable-Stayed Bridge with Central Span of 1000 m Using UHPC

Ultra-high performance concrete (UHPC) is featured by a compressive strength 5 times higher than that of ordinary concrete and by a high durability owing to the control of the chloride penetration speed by its dense structure. The high strength characteristics of UHPC offer numerous advantages like the reduction of the quantities of cables and foundations by the design of a lightweight superstructure in the case of the long-span bridge preserving its structural performance through axial forces and structures governed by compression. This study conducted the conceptual design of a hybrid cable-stayed bridge with central span of 1000 m and exploiting 200 MPa-class UHPC. The economic efficiency of the conceptual design results of the hybrid cable-stayed bridge with central span of 1000 m and of Sutong Bridge, the longest cable-stayed bridge in the world, was analyzed.

Effects of fibers on the mechanical properties of UHPC:A review

Ultra-high performance concrete(UHPC) developed rapidly in research and commercial use during the recent decade. Significant progress has been achieved in its material science and technology, including why and how to add discontinuous fiber reinforcement in it.This paper reviews the researches on understanding the effects of various fibers on the mechanical properties of UHPC, focus on the straight steel fibers but involving also deformed steel fibers, non-steel fibers as well as hybrid fibers. It also discusses the research methodology, prediction of mechanical properties by fiber factors, and the classification of UHPC mechanical properties related to this topic. It shows that(1) the experimental research is the main methodology for investigating the effect of the fibers on the mechanical properties of UHPC;the tensile performance of UHPC should be studied by uniaxial tensile tests and its representative indicators should include tensile strength, initial cracking strength, and peak tensile strain;(2) fiber plays an essential role in the reinforcement of the tensile strength, compressive strength, modulus of elasticity, and other material properties of UHPC, but in weakening the flowability of fresh UHPC. The positive and negative effects of fibers on the mechanical properties of UHPC should be considered,and the technology should be developed to maintain the flowability when high volume fraction of fibers is added in the UHPC;(3) the parameters of steel fibers affecting the mechanical properties of UHPC include volume fraction, size, shape, orientation and distribution, average bonding strength and minimum tensile strength, etc., which are mainly studied independently in the existing research. The studies on the combined effect of these parameters are limited but worthy of further investigation;(4) hybrid fibers could efficiently produce reinforcement effects for UHPC. It has great practical and research significance to conduct in-depth studies though the theoretical analysis and quantitative prediction are complex.