In this paper, we utilized villared rectifier technique to harvest wireless energy to overcome previously used RF-WEH rectenna. Our design focuses mainly on a multiple-stage Villard voltage multiplier model to rectify...In this paper, we utilized villared rectifier technique to harvest wireless energy to overcome previously used RF-WEH rectenna. Our design focuses mainly on a multiple-stage Villard voltage multiplier model to rectify the output voltage of the rectenna and transferred it to a dc load. As a starting point, optimization and parameter analysis offer a novel and small antenna for the 2.45 GHz ISM band that precisely matched. Moreover, the fabricated prototype has measured and simulated results have confirmed the antenna’s accuracy in the reflection coefficient. Second, a highly efficient antenna may effectively harvest the electrical energy by combining with the two-stage voltage multiplier circuit presented at the ISM band. Furthermore, the proposed rectenna has the optimum performance compared to state of art rectennas in terms of efficiency, power range, and impedance bandwidth showing pronounced achievement and increasing the DC output power significantly. The prototype is fabricated and experimentally tested to confirm the concept. Measurement results show that the proposed rectenna can be used for RF energy harvesting applications.展开更多
This paper provides a technical analysis of energy harvesting (EH) in the field of power and energy sector, including different aspects of harvesting energy, individual case history, control strategies of harvesting i...This paper provides a technical analysis of energy harvesting (EH) in the field of power and energy sector, including different aspects of harvesting energy, individual case history, control strategies of harvesting in the field of power and energy sector together with the current trend and future aspects of it. EH is comparatively a new concept which is growing very fast since the 20th century and catching new generation research approaches. This paper not only describes the past and current scenarios of harvesting energy with radio frequency (RF) and renewables but also gives author’s own anticipation of the upcoming future trends of it by comparing the case histories.展开更多
The aim of this paper is to achieve the radio frequency stealth(RFS) during the course of tracking by controlling the radiation energy and the interval of a radar. Firstly, we build the model of probability of interce...The aim of this paper is to achieve the radio frequency stealth(RFS) during the course of tracking by controlling the radiation energy and the interval of a radar. Firstly, we build the model of probability of interception with the once radiation during the course of tracking. Secondly, we establish the model of the cumulative probability of interception to describe the effect of RFS throughout the tracking process and obtain two solutions that are minimizing the probability of interception and the radiation times to reduce the cumulative probability of interception. Thirdly, we propose a self-adapting radiation energy control method(SARE)to minimize the probability of interception. Fourthly, we propose a self-adapting radiation interval control method(SARI) to minimize radiation times. Fifthly, combining SARE with SARI, we propose a SARE-SARI control method(SAEI) during the course of tracking.Finally, we compare SAEI with two others by simulation, and the results show the effect of RFS of SAEI is better than the other two,but we have to make a trade-off between the ability of RFS and the effect of tracking.展开更多
This paper presents a design for a self-powered radio frequency identification (RFID) tag with a thin film bulk acoustic reso- nating piezoelectric power supply (PPS), which can be used for portable remote temperature...This paper presents a design for a self-powered radio frequency identification (RFID) tag with a thin film bulk acoustic reso- nating piezoelectric power supply (PPS), which can be used for portable remote temperature monitoring. We call this system a PPS-RFID for short. The RFID systems have been found to have many applications in the internet of things (IOT) in the past decade. But semi-active RFID tags require an onboard battery which limits their applications in many fields. For these reasons, our research focuses on power sources for the RFID tags. This paper emphasizes the circuit design and simulation of PPS. In our tests, 0.283 mW was generated by PPS at 1 Hz vibration by a 650 N impact force. The results showed that the integrated PPS could supply sufficient power for the designed PPS-RFID tag. The PPS-RFID tag can be widely used for temperature monitoring during mobile transport of perishable items such as medicines or food.展开更多
射频能量捕获(Radio Frequency Energy Harvesting,RF-EH)技术为解决无线传感网络(Wireless Sensor Networks,WSNs)能量有限问题提供了新的方法。为此,针对无人机(Unmanned Aerial Vehicle,UAV)协助的WSNs网络,提出时隙优化的数据收集(T...射频能量捕获(Radio Frequency Energy Harvesting,RF-EH)技术为解决无线传感网络(Wireless Sensor Networks,WSNs)能量有限问题提供了新的方法。为此,针对无人机(Unmanned Aerial Vehicle,UAV)协助的WSNs网络,提出时隙优化的数据收集(Time Slot Optimizing data-gathering,TODG)策略。在TODG策略中,节点先接收来自电力包(Power Beacon,PBs)的无线电能传输(Wireless Power Transfer,WPT)进行充电;再构建最小化中断概率的时隙分配的目标函数,借助于CVX工具求解,获取最优的时隙分配。仿真结果表明,通过优化时隙,TODG策略能够降低中断概率,提升吞吐量。展开更多
文摘In this paper, we utilized villared rectifier technique to harvest wireless energy to overcome previously used RF-WEH rectenna. Our design focuses mainly on a multiple-stage Villard voltage multiplier model to rectify the output voltage of the rectenna and transferred it to a dc load. As a starting point, optimization and parameter analysis offer a novel and small antenna for the 2.45 GHz ISM band that precisely matched. Moreover, the fabricated prototype has measured and simulated results have confirmed the antenna’s accuracy in the reflection coefficient. Second, a highly efficient antenna may effectively harvest the electrical energy by combining with the two-stage voltage multiplier circuit presented at the ISM band. Furthermore, the proposed rectenna has the optimum performance compared to state of art rectennas in terms of efficiency, power range, and impedance bandwidth showing pronounced achievement and increasing the DC output power significantly. The prototype is fabricated and experimentally tested to confirm the concept. Measurement results show that the proposed rectenna can be used for RF energy harvesting applications.
文摘This paper provides a technical analysis of energy harvesting (EH) in the field of power and energy sector, including different aspects of harvesting energy, individual case history, control strategies of harvesting in the field of power and energy sector together with the current trend and future aspects of it. EH is comparatively a new concept which is growing very fast since the 20th century and catching new generation research approaches. This paper not only describes the past and current scenarios of harvesting energy with radio frequency (RF) and renewables but also gives author’s own anticipation of the upcoming future trends of it by comparing the case histories.
基金supported by the National Natural Science Foundation of China(61472441)
文摘The aim of this paper is to achieve the radio frequency stealth(RFS) during the course of tracking by controlling the radiation energy and the interval of a radar. Firstly, we build the model of probability of interception with the once radiation during the course of tracking. Secondly, we establish the model of the cumulative probability of interception to describe the effect of RFS throughout the tracking process and obtain two solutions that are minimizing the probability of interception and the radiation times to reduce the cumulative probability of interception. Thirdly, we propose a self-adapting radiation energy control method(SARE)to minimize the probability of interception. Fourthly, we propose a self-adapting radiation interval control method(SARI) to minimize radiation times. Fifthly, combining SARE with SARI, we propose a SARE-SARI control method(SAEI) during the course of tracking.Finally, we compare SAEI with two others by simulation, and the results show the effect of RFS of SAEI is better than the other two,but we have to make a trade-off between the ability of RFS and the effect of tracking.
基金supported by the MEMS subject construction fund of the Kunming University of Science and Technology (Grant No. 14078024)
文摘This paper presents a design for a self-powered radio frequency identification (RFID) tag with a thin film bulk acoustic reso- nating piezoelectric power supply (PPS), which can be used for portable remote temperature monitoring. We call this system a PPS-RFID for short. The RFID systems have been found to have many applications in the internet of things (IOT) in the past decade. But semi-active RFID tags require an onboard battery which limits their applications in many fields. For these reasons, our research focuses on power sources for the RFID tags. This paper emphasizes the circuit design and simulation of PPS. In our tests, 0.283 mW was generated by PPS at 1 Hz vibration by a 650 N impact force. The results showed that the integrated PPS could supply sufficient power for the designed PPS-RFID tag. The PPS-RFID tag can be widely used for temperature monitoring during mobile transport of perishable items such as medicines or food.
文摘射频能量捕获(Radio Frequency Energy Harvesting,RF-EH)技术为解决无线传感网络(Wireless Sensor Networks,WSNs)能量有限问题提供了新的方法。为此,针对无人机(Unmanned Aerial Vehicle,UAV)协助的WSNs网络,提出时隙优化的数据收集(Time Slot Optimizing data-gathering,TODG)策略。在TODG策略中,节点先接收来自电力包(Power Beacon,PBs)的无线电能传输(Wireless Power Transfer,WPT)进行充电;再构建最小化中断概率的时隙分配的目标函数,借助于CVX工具求解,获取最优的时隙分配。仿真结果表明,通过优化时隙,TODG策略能够降低中断概率,提升吞吐量。
