A novel polypropylene random(PPR)composite materials with optimized properties was developed by addingβ-nucleating compound agents(rare earth complex WBG-2 and aryl amide derivative TMB-5)and ternary compound modifie...A novel polypropylene random(PPR)composite materials with optimized properties was developed by addingβ-nucleating compound agents(rare earth complex WBG-2 and aryl amide derivative TMB-5)and ternary compound modifier(TPE/WBG-2/CaCO_(3)).The effects of differentβ-nucleating agents and ternary compound modifier on the mechanical properties and crystallization behavior of PPR were analyzed.The results show that,compared with pure PPR materials,both WBG-2 and TMB-5 could significantly improve the impact strength of PPR.The crystallization temperature of PPR increased with the addition ofβ-nucleating agent.The modified PPR prepared with ternary compound modifier showed the most excellent comprehensive properties.展开更多
采用差示扫描量热仪、广角X射线衍射仪、扫描电子显微镜,从微观角度探讨退火对无规共聚聚丙烯(Polypropylene Random Copolymer,PPR)管材结晶行为和抗低温冲击性能的影响。结果表明,退火能够有效地提高PPR管材低温下抗冲击性能,在-18℃...采用差示扫描量热仪、广角X射线衍射仪、扫描电子显微镜,从微观角度探讨退火对无规共聚聚丙烯(Polypropylene Random Copolymer,PPR)管材结晶行为和抗低温冲击性能的影响。结果表明,退火能够有效地提高PPR管材低温下抗冲击性能,在-18℃环境下进行落锤冲击实验,退火后PPR管材的破损比由90%减少至50%。退火不仅可以促进PPR管材内分子链重新排列、提高其规整性、消除PPR管材的热应力,还可以提高PPR管材的结晶度、诱导内部β晶的生成,从而提高其抗冲击韧性。展开更多
Long chain branched polypropylene random copolymers （LCB-PPRs） were prepared via reactive extrusion with the addition of dicumyl peroxide （DCP） and various amounts of 1,6-hexanediol diacrylate （HDDA） into PPR. F...Long chain branched polypropylene random copolymers （LCB-PPRs） were prepared via reactive extrusion with the addition of dicumyl peroxide （DCP） and various amounts of 1,6-hexanediol diacrylate （HDDA） into PPR. Fourier transform infrared spectrometer （FTIR） was applied to confirm the existence of branching and（ investigate the grafting degree for the modified PPRs. Melt flow index （MFI） and oscillatory shear rheological properties including complex viscosity, storage modulus, loss tangent and the Cole-Cole plots were studied to differentiate the LCB-PPRs from linear PPR. Differential scanning calorimetry （DSC） and polarized light microscopy （PLM） were used to study the melting and crystallization behavior and the spherulite morphology, respectively. Qualitative and quantitative analyses of rheological curves demonstrated the existence of LCB. The effect of the LCB on crystalline morphology, crystallization behavior and molecular mobility, and, thereby, the mechanical properties were studied and analyzed. Due to the entanglements between molecular chains and the nucleating effect of LCB, LCB-PPRs showed higher crystallization temperature and crystallinity, higher crystallization rate, more uniformly dispersed and much smaller crystallite compared with virgin PPR, thus giving rise to significantly improve impact strength. Moreover, the LCB-PPRs exhibited the improved yield strength. The mobility of the molecular chain segments, as demonstrated by dynamic mechanical analysis （DMA）, was improved for the modified PPRs, which also contributed to the improvement of their mechanical properties.展开更多
Although addition of β-nucleating agent directly into homo-polypropylene （PPH） is a useful method to improve ,β-crystal content and toughen PPH, polypropylene random copolymer （PPR） makes this method powerless d...Although addition of β-nucleating agent directly into homo-polypropylene （PPH） is a useful method to improve ,β-crystal content and toughen PPH, polypropylene random copolymer （PPR） makes this method powerless due to its random structure and low crystallinity. In this study, the β-nucleated PPR with high β-crystal content was prepared by a novel high effective β-nucleating system which consists of β-nucleation agent （TMB-5） and modified zeolite 13X （M13X）. It was found that M13X and TMB-5 had a synergistic influence on improving β-crystal content and toughening PPR. The content of β-crystal in PPR/M13X/TMB-5 was significantly larger than the sum of that in PPR/M13X and PPR/TMB-5. Besides, fracture behavior, phase morphology and relaxation of matrix chain segments were also investigated. The results showed that M13X and TMB-5 improved the mobility of amorphous chain segments at low temperature and contributed to much energy dissipation. This work provides a powerful method to modify PPR.展开更多
To enhance the ultraviolet resistance of ZnO based polymer materials, ZnO-supported mesoporous zeolite（M-ZnO） was prepared and characterized by atomic absorption spectroscopy and scanning electron microscopy. The ul...To enhance the ultraviolet resistance of ZnO based polymer materials, ZnO-supported mesoporous zeolite（M-ZnO） was prepared and characterized by atomic absorption spectroscopy and scanning electron microscopy. The ultraviolet resistance, crystallization behavior and melting characteristics of ZnO and M-ZnO filled PPR composites were compared by FTIR spectra and differential scanning calorimetry. The ultraviolet resistance of M-ZnO filled PPR composites is higher than that of ZnO filled PPR composites, indicating higher ultraviolet resistance of M-ZnO than that of ZnO. The crystallization temperatures of mesoporous zeolite filled PPR were higher than those of M-ZnO and decreased with increasing UV-irradiation time. But the crystallization temperatures of M-ZnO filled PPR composites were not influenced by UV-irradiation time. The ZnO supported on the surface of zeolite is effective in enhancing the ultraviolet resistance of ZnO based polymer materials.展开更多
基金Funded by the Natural Science Foundation of Liaoning Province of China(No.20180550432)Natural Science Foundation for Young Doctoral Research(No.2020-BS-158)Basic Scientific Research Project of Colleges and Universities of Liaoning Provincial Department of Education(No.LJKQZ2021060)。
文摘A novel polypropylene random(PPR)composite materials with optimized properties was developed by addingβ-nucleating compound agents(rare earth complex WBG-2 and aryl amide derivative TMB-5)and ternary compound modifier(TPE/WBG-2/CaCO_(3)).The effects of differentβ-nucleating agents and ternary compound modifier on the mechanical properties and crystallization behavior of PPR were analyzed.The results show that,compared with pure PPR materials,both WBG-2 and TMB-5 could significantly improve the impact strength of PPR.The crystallization temperature of PPR increased with the addition ofβ-nucleating agent.The modified PPR prepared with ternary compound modifier showed the most excellent comprehensive properties.
文摘采用差示扫描量热仪、广角X射线衍射仪、扫描电子显微镜,从微观角度探讨退火对无规共聚聚丙烯(Polypropylene Random Copolymer,PPR)管材结晶行为和抗低温冲击性能的影响。结果表明,退火能够有效地提高PPR管材低温下抗冲击性能,在-18℃环境下进行落锤冲击实验,退火后PPR管材的破损比由90%减少至50%。退火不仅可以促进PPR管材内分子链重新排列、提高其规整性、消除PPR管材的热应力,还可以提高PPR管材的结晶度、诱导内部β晶的生成,从而提高其抗冲击韧性。
基金financially supported by the Foundation for Development of Science and Technology of Fuzhou University(No.2011-XY-1)
文摘Long chain branched polypropylene random copolymers （LCB-PPRs） were prepared via reactive extrusion with the addition of dicumyl peroxide （DCP） and various amounts of 1,6-hexanediol diacrylate （HDDA） into PPR. Fourier transform infrared spectrometer （FTIR） was applied to confirm the existence of branching and（ investigate the grafting degree for the modified PPRs. Melt flow index （MFI） and oscillatory shear rheological properties including complex viscosity, storage modulus, loss tangent and the Cole-Cole plots were studied to differentiate the LCB-PPRs from linear PPR. Differential scanning calorimetry （DSC） and polarized light microscopy （PLM） were used to study the melting and crystallization behavior and the spherulite morphology, respectively. Qualitative and quantitative analyses of rheological curves demonstrated the existence of LCB. The effect of the LCB on crystalline morphology, crystallization behavior and molecular mobility, and, thereby, the mechanical properties were studied and analyzed. Due to the entanglements between molecular chains and the nucleating effect of LCB, LCB-PPRs showed higher crystallization temperature and crystallinity, higher crystallization rate, more uniformly dispersed and much smaller crystallite compared with virgin PPR, thus giving rise to significantly improve impact strength. Moreover, the LCB-PPRs exhibited the improved yield strength. The mobility of the molecular chain segments, as demonstrated by dynamic mechanical analysis （DMA）, was improved for the modified PPRs, which also contributed to the improvement of their mechanical properties.
基金financially supported by the National Natural Science Foundation of China(No.50803042)Chengdu Economic & Technological Development Zone and Chuanlu Group
文摘Although addition of β-nucleating agent directly into homo-polypropylene （PPH） is a useful method to improve ,β-crystal content and toughen PPH, polypropylene random copolymer （PPR） makes this method powerless due to its random structure and low crystallinity. In this study, the β-nucleated PPR with high β-crystal content was prepared by a novel high effective β-nucleating system which consists of β-nucleation agent （TMB-5） and modified zeolite 13X （M13X）. It was found that M13X and TMB-5 had a synergistic influence on improving β-crystal content and toughening PPR. The content of β-crystal in PPR/M13X/TMB-5 was significantly larger than the sum of that in PPR/M13X and PPR/TMB-5. Besides, fracture behavior, phase morphology and relaxation of matrix chain segments were also investigated. The results showed that M13X and TMB-5 improved the mobility of amorphous chain segments at low temperature and contributed to much energy dissipation. This work provides a powerful method to modify PPR.
基金financially supported by the National Natural Science Foundation of China(Nos.51173208 and 51373202)the Natural Science Foundation of Guangdong(No.S2011020001212)
文摘To enhance the ultraviolet resistance of ZnO based polymer materials, ZnO-supported mesoporous zeolite（M-ZnO） was prepared and characterized by atomic absorption spectroscopy and scanning electron microscopy. The ultraviolet resistance, crystallization behavior and melting characteristics of ZnO and M-ZnO filled PPR composites were compared by FTIR spectra and differential scanning calorimetry. The ultraviolet resistance of M-ZnO filled PPR composites is higher than that of ZnO filled PPR composites, indicating higher ultraviolet resistance of M-ZnO than that of ZnO. The crystallization temperatures of mesoporous zeolite filled PPR were higher than those of M-ZnO and decreased with increasing UV-irradiation time. But the crystallization temperatures of M-ZnO filled PPR composites were not influenced by UV-irradiation time. The ZnO supported on the surface of zeolite is effective in enhancing the ultraviolet resistance of ZnO based polymer materials.
