Influence ofβ-nucleating Compound Agents on the Mechanical Properties and Crystallization Behavior of Polypropylene Random Copolymer

A novel polypropylene random(PPR)composite materials with optimized properties was developed by addingβ-nucleating compound agents(rare earth complex WBG-2 and aryl amide derivative TMB-5)and ternary compound modifier(TPE/WBG-2/CaCO_(3)).The effects of differentβ-nucleating agents and ternary compound modifier on the mechanical properties and crystallization behavior of PPR were analyzed.The results show that,compared with pure PPR materials,both WBG-2 and TMB-5 could significantly improve the impact strength of PPR.The crystallization temperature of PPR increased with the addition ofβ-nucleating agent.The modified PPR prepared with ternary compound modifier showed the most excellent comprehensive properties.

Effect of Long Chain Branching on the Rheological Behavior,Crystallization and Mechanical Properties of Polypropylene Random Copolymer

Long chain branched polypropylene random copolymers （LCB-PPRs） were prepared via reactive extrusion with the addition of dicumyl peroxide （DCP） and various amounts of 1,6-hexanediol diacrylate （HDDA） into PPR. Fourier transform infrared spectrometer （FTIR） was applied to confirm the existence of branching and（ investigate the grafting degree for the modified PPRs. Melt flow index （MFI） and oscillatory shear rheological properties including complex viscosity, storage modulus, loss tangent and the Cole-Cole plots were studied to differentiate the LCB-PPRs from linear PPR. Differential scanning calorimetry （DSC） and polarized light microscopy （PLM） were used to study the melting and crystallization behavior and the spherulite morphology, respectively. Qualitative and quantitative analyses of rheological curves demonstrated the existence of LCB. The effect of the LCB on crystalline morphology, crystallization behavior and molecular mobility, and, thereby, the mechanical properties were studied and analyzed. Due to the entanglements between molecular chains and the nucleating effect of LCB, LCB-PPRs showed higher crystallization temperature and crystallinity, higher crystallization rate, more uniformly dispersed and much smaller crystallite compared with virgin PPR, thus giving rise to significantly improve impact strength. Moreover, the LCB-PPRs exhibited the improved yield strength. The mobility of the molecular chain segments, as demonstrated by dynamic mechanical analysis （DMA）, was improved for the modified PPRs, which also contributed to the improvement of their mechanical properties.

COMBINED EFFECT OF MODIFIED ZEOLITE 13X AND β-NUCLEATING AGENT ON IMPROVING β-CRYSTAL CONTENT AND TOUGHENING POLYPROPYLENE RANDOM COPOLYMER

Although addition of β-nucleating agent directly into homo-polypropylene （PPH） is a useful method to improve ,β-crystal content and toughen PPH, polypropylene random copolymer （PPR） makes this method powerless due to its random structure and low crystallinity. In this study, the β-nucleated PPR with high β-crystal content was prepared by a novel high effective β-nucleating system which consists of β-nucleation agent （TMB-5） and modified zeolite 13X （M13X）. It was found that M13X and TMB-5 had a synergistic influence on improving β-crystal content and toughening PPR. The content of β-crystal in PPR/M13X/TMB-5 was significantly larger than the sum of that in PPR/M13X and PPR/TMB-5. Besides, fracture behavior, phase morphology and relaxation of matrix chain segments were also investigated. The results showed that M13X and TMB-5 improved the mobility of amorphous chain segments at low temperature and contributed to much energy dissipation. This work provides a powerful method to modify PPR.

Enhanced Ultraviolet Resistance of Polypropylene Random Copolymer Filled by ZnO-supported Mesoporous Zeolite

To enhance the ultraviolet resistance of ZnO based polymer materials, ZnO-supported mesoporous zeolite（M-ZnO） was prepared and characterized by atomic absorption spectroscopy and scanning electron microscopy. The ultraviolet resistance, crystallization behavior and melting characteristics of ZnO and M-ZnO filled PPR composites were compared by FTIR spectra and differential scanning calorimetry. The ultraviolet resistance of M-ZnO filled PPR composites is higher than that of ZnO filled PPR composites, indicating higher ultraviolet resistance of M-ZnO than that of ZnO. The crystallization temperatures of mesoporous zeolite filled PPR were higher than those of M-ZnO and decreased with increasing UV-irradiation time. But the crystallization temperatures of M-ZnO filled PPR composites were not influenced by UV-irradiation time. The ZnO supported on the surface of zeolite is effective in enhancing the ultraviolet resistance of ZnO based polymer materials.

Enhanced Mechanics in Injection Molded Isotactic Polypropylene/Polypropylene Random Copolymer Blends via Introducing Network-like Crystal Structure

The crystallization behavior, rheological behavior, mechanical properties and microstructures of injection molded isotactic polypropylene （iPP）, polypropylene random copolymer （co-PP） and iPP/co-PP blends were investigated. Differential scanning calorimetry （DSC） and dynamic rheological analysis illustrated that iPP and co-PP were compatible in the blends and co-PP uniformly dispersed in the/PP phase. Polarizing optical microscope （POM） was adopted to observe the crystal size and morphology evolution. The results of mechanical properties and scanning electron microscopy （SEM） indicated that the crystal size of iPP in iPP/co-PP blends （10 wt% co-PP ＋ 90 wt% iPP and 30 wt% co-PP ＋ 70 wt% iPP） radically decreased after the incorporation of co-PP. During crystallization, the molecular chain segments of co-PP could penetrate iPP spherulites and form a network-like crystalline structure. The network-like crystal structure could effectively transmit stress and consume more energy to overcome intermolecular forces to resist stretching. In this way, the strength would improve to a certain degree. The impact fracture mechanism of iPP/co-PP blends is quasi ductile fracture by multiple crazes. Our work discovered that the blends containing 10 wt% and 30 wt% ofco-PP exhibited prominent toughness and reinforcement.