Research on Night Vision System Based on Range-Gated Imaging

A design of low-light-level night vision system is described,which can image objects selectively in the specific space. The system can selectively image some objects in specific distances,meanwhile ignore those shelters on the way of observation by combining an intensifying charge coupled device(ICCD) with a near infrared laser assisted in vision,whose operation wavelength matches with the photocathode of the image tube,and adopting the gated mode and adjustable time-delay. A semiconductor laser diode of 100 W in peak power is chosen for illumination. The laser and the image tube operate in 150 ns pulse width and 2 kHz repeat frequency. Some images of different objects at the different distances within 100 m can be obtained clearly,and even behind a grove by using a sampling circuit and a delay control device at 100 W in peak power of semiconductor laser diode,150 ns in pulse width of laser and image tube,2 kHz in repeat frequency.

Influence of Range Gate Width on Detection Probability and Ranging Accuracy of Single Photon Laser Altimetry Satellite

The influence of the single photon laser altimeter range-gate width on the detection probability and ranging accuracy is discussed and analyzed,according to the LiDAR equation,single photon detection equation and the Monte Carlo method to simulate the experiment.The simulated results show that the probability of detection is not affected by the range gate,while the probability of false alarm is relative to the gate width.When the gate width is 100 ns,the ranging accuracy can accord with the requirements of satellite laser altimeter.But when the range gate width exceeds 400 ns,ranging accuracy will decline sharply.The noise ratio will be more as long as the range gate to get larger,so the refined filtering algorithm during the data processing is important to extract the useful photons effectively.In order to ensure repeated observation of the same point for 25 times,we deduce the quantitative relation between the footprint size,footprint,and frequency repetition according to the parameters of ICESat-2.The related conclusions can provide some references for the design and the development of the domestic single photon laser altimetry satellite.

Key technologies implementation of high-repetition-rate satellite laser ranging

Satellite laser ranging （SLR） is one of the major space geodetic instruments, which has various applications in earth science. In this paper, we introduce several issues regarding the key technology implementation of high-repetition-rate SLR system. Compared with traditional technology, using kHz and 8ps pulse width laser component, the data quantity and quality of high-repetition-rate satellite laser ranging （SLR） can be significantly improved. The characteristics of high-repetition-rate laser ranging and the key technologies are presented, including the event timer with the precision of picosecond, the generation of range gate signal, and so on. All of them are based on the Field Programmable Gate Arrays （FPGA） and tested on China mobile SLR system-TROS1000. Finally, the observations of satellite Beacon-C are given.

Parameters Design of Pull-off Deceptive Jamming to Terminal Guidance Radar

A deceptive pull-off jamming method to terminal guidance radar is put forward in this paper.The design rules about the important jamming parameters are discussed in detail,including the number of the decoy targets in range dimension,the velocity of the range gate pull-off,and the number of the decoy targets in velocity dimension and the velocity of the Doppler frequency pull-off.Also,the steps to design these parameters are brought out.The rules and design procedure discussed in this paper have important meaning for the choice of the reasonable jamming parameters in the practical applications,which can help to obtain good jamming effect.

SURVEILLANCE OF MOVING TARGET BEHIND PARTITIONS USING A UWB-TWDR

This paper firstly analyzes the property of the low frequency electromagnetic wave, which can penetrate many types of non-metallic materials, and the ability of Ultra-Wide Band (UWB) impulse signal which has high range resolution. Then the methods are discussed for conducting surveillance through walls, detecting and locating the moving persons behind the partitions. The schematic diagram of Through-Wall Detecting Radar (TWDR) and the models of moving target are shown and the principle of detecting the moving target is also provided with coherent superimposing technique on a range gate. Finally an algorithm for estimating the location of targets is given. The performance of TWDR is validated by the experiments of penetrating a wood block, a red brick wall and a reinforced concrete wall.