Heterosis for Seed Yield, Oil Content and Other Characters in Rapeseed (Brassica napus L.)

Nine inbred lines of rapeseed （Brassica napus L.） used as male were crossed to five recessive genetic male sterile （RGMS） lines used as female to produce 45 single crosses. The crosses, their parents and a check hybrid were tested at two locations during 2007 to 2008 for testing the performance and heterosis of hybrids for seed yield and other characters. Results showed that variations for seed yield, oil content, days to flowering and days to maturity were significant. Mean squares for hybrids were significant for all characters. High heterosis （-4.5%-88.3%）, heterobeltiosis （-15.6%-81.1%） and standard heterosis G34.8%-33.1%） were found for the seed yield. The highest heterosis and heterobeltiosis were found in the cross QH303-4A× 1190. The highest standard heterosis was found in the cross Qianyou8A×Q034. Both positive and negative heterosis of single crosses were detected for the oil content. Small heterosis was found for days to flowering and days to maturity. Among parents, Ⅲ 188, Ⅲ224, and Q034 were proved to be the superior for seed yield when used as parents in most of the hybrid combinations. 2365, Ⅲ224, and QH303-4AB were good for high oil content breeding, Ⅲ 176, 2313 and Qianyou3AB were good for the early hybrid breeding. Total 11 hybrids yielded higher than 2 500 kg·hm^-2 and also gave significantly positive heterosis, heterobeltiosis and standard heterosis. Among them, 10 crosses gave higher oil content than that of check. These crosses can be used in the future breeding program for the seed yield and the oil content. Two crosses including Qianyou3A × Ⅲ224 and Qianyou3A×2313 can be used for the early breeding program.

Comparative assessment of the frying efficiency of standard and low linolenic rapeseed oils: Principal Component Analysis (PCA)

In this research,the performance of regular rapeseed oil(RSO)and modified low-linolenic rapeseed oil(LLRO)during frying was assessed using a frying procedure that commonly found in fast-food restaurants.Key physicochemical attributes of these oils were investigated.RSO and LLRO differed for initial linolenic acid(12.21%vs.2.59%),linoleic acid(19.15%vs.24.73%).After 6 successive days frying period of French fries,the ratio of linoleic acid to palmitic acid dropped by 54.49%in RSO,higher than that in LLRO(51.54%).The increment in total oxidation value for LLRO(40.46 unit)was observed to be significantly lower than those of RSO(42.58 unit).The changes in carbonyl group value and iodine value throughout the frying trial were also lower in LLRO compared to RSO.The formation rate in total polar compounds for LLRO was 1.08%per frying day,lower than that of RSO(1.31%).In addition,the formation in color component and degradation in tocopherols were proportional to the frying time for two frying oils.Besides,a longer induction period was also observed in LLRO(8.87 h)compared to RSO(7.68 h)after frying period.Overall,LLRO exhibited the better frying stability,which was confirmed by principal component analysis(PCA).

Influence of two-stage harvesting on the properties of cold-pressed rapeseed(Brassica napus L.)oils

Rapeseed(Brassica napus L.)harvesting method is critical since it significantly determines the seed yield,oil quality,and industrial efficiency.This study investigated the influences of harvesting methods on the quality of cold-pressed rapeseed oil of two varieties.Oil color,peroxide value(POV),tocopherol content,fatty acid composition,and polarity of total polyphenols(PTP)contents of two rapeseed varieties in Huanggang and Xiangyang were compared through artificially simulated combined harvesting and two-stage harvesting.Results showed significant differences in the quality of rapeseed oil between the two harvesting methods.The red value(R-value),POV,total tocopherol contents,linoleic and linolenic acid content,and PTP content of the pressed rapeseed oil prepared by the combined harvesting method were about 27.6,5.7,15.8,2.0,0.5,and 28.6%lower than those of the oil produced from the two-stage harvesting method,respectively.Xiangyang and Huayouza62 performed better in the two regions and two varieties,respectively.To sum up,the rapeseed oil obtained 41–44 days after final flowering of combined harvesting,35 days after final flowering,and six days of post-ripening of the two-stage harvesting had the best quality.

Occurrence state and oil content evaluation of Permian Fengcheng Formation in the Hashan area as constrained by NMR and multistage Rock-Eval

The Hashan area,neighboring the Mahu Sag that is rich in the shale oil resources,showed commercial oil flow in the corresponding lacustrine shales of the Lower Permian Fengcheng Formation(P)with reserve scale approximately 789 million tons,presenting great potential for oil exploration.Despite their geographical proximity,the hydrocarbon occurrence and oil-bearing capacity of shale in the Hashan area and Mahu Sag greatly differ owing to the complex tectonic evolution.Therefore,understanding the occurrence state and oil content of the Pif in the Hashan area is crucial for ongoing shale oil exploration activities and the development of the northwestern margin of the Junggar Basin.In this study,an in-tegrated investigation,including petrological observations,scanning electron microscopy(SEM)obser-vation,analysis of nuclear magnetic resonance(NMR)Ti-T2 spectra,and conventional and multistage Rock-Eval pyrolysis methods were conducted to evaluate the occurrence state and oil content of the Pif shale in the Hashan area.The results indicate that plagioclase(average 30.7%)and quartz(24.1%)dominate the mineral compositions of the Pf shale samples.A method involving quartz-plagioclase-carbonate minerals is proposed to conduct lithofacies classification.In the Hashan area,the organic matter abundance in the Pf shale is scaled in fair to good range,the thermal maturity ranges from immature to early mature stage,and the primary organic matter types are Types I and Ilj.Intergranular and dissolution pores are the two most common pore types.The free oil is mostly found in the pores and microfractures of the mineral matrix,whereas the adsorbed oil is mostly adsorbed on the surfaces of kerogen and clay minerals.The high organic matter abundance,quartz content,and porosity account for substantial increase in the oil content,the area rich in shale oil resources coincides with that rich in free oil.The most favorable lithofacies in the Hashan area is the calcareous mudstone/shale,which hosts the highest free oil content(average 2.49 mg),total oil content(15.02 mg/g),organic matter abundance CTOC:1.88% and S_(1)+S_(2)=20.54mg/g and orositv(5.97%)

Profiling and geographical distribution of seed oil content of sunflower in Ukraine

The sunflower has the potential to be a highly competitive crop owing to its diversity market and the valuable oil it produces.Nevertheless,the amount of sunflower seed oil-a key factor for the crushing industry-is affected by genotype and environment,which sometimes is difficult to predict.The paper analyzes the theoretical principles of sunflower growth in Ukraine,highlights the current trends in the sowing of this crop,the influence of climatic factors of the environment on the prospects of the oilseed sunflower yield.The results of the research are presented for 3 years(2014-2016),during the authors conducted a grain quality observatory at the regional level,taking into account the climatic conditions of sunflower growth in different natural zones of Ukraine(from 45
to 51
north latitude and from 22
to 37
east longitude).Additionally,the research includes the coefficient of significance of the deviation from long-term climatic indicators,which makes it possible to forecast sunflower yield in the future.The analyzed data was obtained from the commercial fields with a minimum area of 40 ha in all Ukrainian regions except Crimea peninsula,Donetsk and Luhansk regions.The results obtained in research show the great diversity of oil content index as per both latitude and longitude meaning.If we consider the entire country,this survey shows that the seed oil content can change dramatically from year to year:e.g.47.5%in one year versus 45.7%in another year.Regionally,these changes have a completely different dynamic with a gradual decrease in seed oil content in the southern part of the country.The main goal of the research was to identify the best sunflower growing areas in Ukraine according to the oil content index.

Preparation, friction and wear properties of hydrophobic lanthanum borate nanorods in rapeseed oil

Oleic acid (denoted as OA) surface-caped lanthanum borate nanorods, abbreviated as OA/LaBO3·H2O, were prepared via hydrothermal method. The microstructures of the as-prepared OA/LaBO3·H2O nanorods were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques. The friction and wear properties of OA/LaBO3·H2O nanorods in rapeseed oil were evaluated with a four-ball tribo-tester. The results show that the as-prepared OA/LaBO3·H2O nanorods are hydrophobic and display nanorods morphology with uniform diameter of about 50 nm and length of up to 500 nm. In the meantime, OA/LaBO3·H2O nanorods can obviously improve the anti-wear and friction-reducing capacities of rapeseed oil, and the optimal anti-wear and friction-reducing properties of rapeseed oil were obtained at an OA/LaBO3·H2O content of 1% (mass fraction).

Friction and wear performances of magnesium alloy against steel under lubrication of rapeseed oil with S-containing additive

A S-containing additive, sulfuration modified rapeseed oil （named as SRO）, was prepared by chemical modification of rapeseed oil with sulfur compounds. The results indicate that the friction and wear of the magnesium alloy-steel tribomates could be effectively reduced by formulating SRO into rapeseed oil lubricant. The friction coefficients and the wear volumes of magnesium alloy decrease with increasing contents of SRO. The surface lubricated with SRO-doped rapeseed oil was characterized by less wear as compared with that lubricated with neat rapeseed oil. The enhanced anti-wear and friction-reducing abilities of rapeseed oil by SRO in the lubrication of magnesium alloy against steel were ascribed to the formation of a composite boundary lubrication film due to the strong adsorption of SRO and rapeseed oil onto the lubricated surfaces and their tribochemical reactions with magnesium alloy.

Evaluation of Seed Oil Content in Cucumber Germplasm

With 35 different ecological types of cucumber germplasm resources as test materials, the soxhlet extraction was used to extract the crude fat from the cu- cumber seeds to analyze the seed oil content, with the aim to lay foundations for the application and new variety breeding related with cucumber seed oil. The results showed that there were significant differences in seed oil content between different cucumber varieties with the amplitude of variation rangeing from 31.03% to 40.59%, among which the seed oil content of south China cucumber was the highest of 40.59%, while the seed oil content of north China cucumber was the lowest of 31.03%. Four va.rieties with oil content of greater than 38.50% and four varieties with oil content of less than 32.01% werescreened out.

Cloning of Acetyl-CoA Carboxylase accD Subunit Gene from Brassica campestris and Effect of Its Expression on Oil Content

[Objective] This study aimed to clone accD gene from Brassica campestris （Yunnan small rapeseed） with different oil content and analyze the effect of accD gene expression level on rapeseed oil content. [Method] The accD gene encoding β-CT Ⅱsubunit of acetyl-CoA carboxylase was cloned from Yunnan small rapeseeds with different oil content. Then, sequence alignment and the influence upon seed oil content by the expression of accD gene were analyzed. [Result] There were a few base pair substitutes among the accD genes from different Yunnan small rapeseeds, and their homology was up to 98.6%. The expression of accD gene was increased with reproduction development, and reached peak in late-stage siliques. The seed oil content was positively influenced by the expression of accD gene in middle-stage and late-stage siliques. [Conclusion] This study provides a certain theoretical basis for illustrating the molecular mechanism about rapeseed oil content and breeding new high-oil rapeseed cultivars.

Breeding of Brassica napus Cultivar Shuangyou 092 with High Oil Content and Its Fine-quality and High-yield Cultural Techniques

Shuangyou 092, a Brassica napus cultivar with high oil content, high quality and high yield, was bred by Institute of Industrial Crops of Henan Academy of Agricultural Sciences with Zhongshuang 9 as female parent, and the cytoplasmic male sterility maintainer line 32B as male parent. It was registered and released in 2014. The average yield was 2 858.5 kg/hm^2 in Henan province regional test of high quality, 12.43% higher than the check variety Fengyou 9 in 2010-2011 and 2011-2012. Its yield was 3 478.8 kg/ha in Henan Province productive test of high quality,9.52% higher than the check variety Fengyou 9 in 2012-2013. According to the test results in 2011-2012 and 2012-2013, the seeds quality of Shuangyou 092 was very good with near zero erucic acid （0.0%, 0.1%） in fat acid, 17.19 μmol/g and 19.78 μmol/g glucosinolates in its meal, the oil content of 46.60% and 45.76%. The cultivar was resistant （tolerant） to Sclerotinia, virus diseases, cold, and lodging. Its high yield and high quality can be obtained by planting in large scale, sowing at right time, rational close planting, balancing fertilizer and harvesting at right time.

Study Rheological Behavior for Rapeseed Oils

Rheological behavior of this article presents rapeseed oil. Dynamic viscosity of rapeseed oil was determined at temperatures between 40 ℃-90 ℃ and shear rates ranging from 3.3-120 s1. All types of oils studied Bingham fluid behavior in the temperature range from 313-363 K. Correlation coefficients have similar values to one for all oils studied.

Friction and Wear Performance of Magnesium Alloy against Steel under Lubrication of Rapeseed Oil with BN-containing Additive

A BN-containing additive,the boron and nitrogen modified rapeseed oil (abbreviated as BNR),was prepared by chemical modification of rapeseed oil with boric and nitrous compounds.The friction and wear performances of the AZ91D magnesium alloy against the GCr15 bearing steel under lubrication of rapeseed oil containing BNR were evaluated on a SRV tribotester.The topography and chemical species of the worn surfaces of magnesium alloy were analyzed by a scanning electron microscope (SEM) and an X-ray photoelectron spectroscope (XPS),respectively.The test results indicated that the friction and wear of the magnesium alloy-steel tribomates could be effectively reduced by incorporating BNR into the rapeseed oil lubricant.The friction coefficients and the wear scars of magnesium alloy decreased with an increasing content of BNR.The surface lubricated with the BNR-doped rapeseed oil demonstrated less wear as compared with that lubricated with neat rapeseed oil.The enhanced anti-wear and friction-reducing abilities of rapeseed oil provided by BNR in the lubrication of magnesium alloy against steel were ascribed to the formation of a composite boundary lubrication film due to the strong adsorption of BNR and rapeseed oil onto the lubricated surfaces and their tribochemical reactions with magnesium alloy.

Liquid rheology study on refined rapeseed oil

The rapeseed oil extracted from the mature seeds was purified by refining processing,and the rheological characteristic analysis of the viscosity and dynamic shear rate at gradient temperatures was made.The result shows that at 20,40,60 and 80 ℃ respectively,when the shear rate gradually rises,the torque increases accordingly but its viscosity does not vary distinctly.The result suggests that when rapeseed oil is used as the raw of edible oils and industries,the working procedures at high temperature will not influence its rheological characteristic distinctly.

Preparation and Tribological Behavior of Hydrophobic Lanthanum Borate Nanosheets in Rapeseed Oil

Oleic acid-capped lanthanum borate(abbreviated as OA/La BO_3·H_2O) nanosheets were prepared by the hydrothermal method. The microstructures of as-prepared OA/La BO_3·H_2O were characterized by means of SEM, TEM, EDS, FTIR and XRD, respectively. Moreover, the friction and wear properties of OA/La BO_3·H_2O as a lubricant additive in rapeseed oil were evaluated on a four-ball tribotester. The tribochemical characteristics of worn surfaces were investigated by SEM and XPS. The results showed that the hydrophobic OA/La BO_3·H_2O nanosheets exhibited their morphology with a diameter in the range of 100 nm to 300 nm and a thickness of about 25 nm, and displayed excellent dispersing stability in rapeseed oil. In the meantime, the rapeseed oil doped with OA/La BO_3·H_2O nanosheets markedly decreased the friction and wear of steel balls, and the optimal friction-reducing and antiwear ability of rapeseed oil was obtained at an OA/La BO_3·H_2O content of 1.0%. The outstanding tribological performance of OA/La BO_3·H_2O in rapeseed oil was attributed to the formation of a composite boundary lubrication film mainly composed of lubricious tribochemical species of B_2O_3, La_2O_3 and Fe_2O_3, and deposits of OA/La BO_3·H_2O nanosheets as well as the adsorbates of rapeseed oil on rubbed surfaces.

Synthesis of Two Novel Additives and Study of Their Tribological Properties in Rapeseed Oil

Two novel ashless additives - benzothiazole derivatives containing boron and chlorine, OBC and BBC, were synthesized. The tribological performances of OBC and BBC at different mass ratios as additives in rapeseed oil （RO） were examined on a four-ball machine. The worn surfaces of the lower steel balls lubricated by oil samples were analyzed by means of scanning electron microscopy （SEM）. The test results showed that OBC and BBC had good solubility in the base oil, and could effectively increase the load-carrying capacity of the base oil. The maximum non-seizure load of oil sample containing 1.5 m% BBC was 1117 N, which was 2.3 times as much as that of the base oil. Both OBC and BBC could improve the anti-wear and corrosion inhibiting performance and thermal stability of the base oil, whose initial decomposition temperatures was above 350 ~C. However, OBC and BBC at different concentrations could increase the friction coefficient of the base oil. The SEM morphology of steel balls lubricated by oil samples containing 1.5 m% additives seemed to be more uniform and smoother than that of the base oil, and the scars formed were very shallow.

Dielectric Permittivity of Rigid Rapeseed Oil Polyol Polyurethane Biofoams and Petrochemical Foams at Low Frequencies

Early investigations of dielectric permittivity of rigid polyurethane foams at low frequencies were made on petrochemical-origin foams,mainly by means of parallel plate capacitors.In the present investigation biopolyol was synthesized from Latvia-grown rapeseeds’oil by the transesterification method with triethanolamine,in an environmentally friendly process,without emission of harmful substances,at temperatures 175℃±5℃.Rigid,closed-cell rapeseed oil polyol polyurethane biofoams and petrochemical foams were made ensuring content of the renewable rapeseed oil polyol in ready foams 27 wt.%–29 wt.%.Dielectric permittivity of the polyurethane foams and the underlying monolithic petrochemical-origin polyurethane and biopolyurethane was measured with a non-destructive dielectric spectrometer equipped with a capacitive sensor of one-side access type at 16 discrete frequencies distributed geometrically over the band 10 Hz,…,330 kHz.Permittivity value of the gaseous phase in the closed-cells was estimated to beεg≈1.001 that corresponds to the values,characteristic for the most of gases.Dielectric permittivity of petrochemical polyurethane foams and the mentioned biofoams was compared with permittivity of polyurethane foams from industrial producers Sika JSC and General Plastics Manufacturing Co.Polyurethane foams of the developed formulation exhibit competitive,low dielectric permittivity,not exceeding that of the foams from industrial producers:petrochemical foams up to 550 kg/m^(3) and the mentioned biofoams,comprising the renewable rapeseed oil polyol,up to densities 230–250 kg/m^(3).Considering petrochemical-origin polyurethane foams as a heterogeneous media“Polymer—gaseous phase”,the applicability of the rule of mixture and Maxwell–Garnett equation to model mathematically the dependence of effective dielectric permittivity on the volume fraction of phases was showed.

Effect of amide type modified rapeseed oil as lubricating additive on friction and wear behavior of steel-steel and steel-aluminum alloy systems

A new type of environmentally friendly lube additive-amide type modified rapeseed oil was synthesized and characterized by infrared spectrum. Its effect on the friction and wear behavior of steel-steel and steel-aluminum alloy systems were investigated with a four-ball machine and an Optimol SRV friction and wear tester respectively.The morphographies of the worn surfaces were analyzed by means of scanning electron microscopy(SEM). The worn surfaces of the 2024Al alloy block were analyzed by means of X-ray photoelectron spectroscopy(XPS). The results show that the modified rapeseed oil as additives can obviously decrease the wear rate and friction coefficient of steel pair and steel-aluminum frictional pair. Its lubrication mechanism is inferred that a high strength complex protection films form on the worn surface of the Al alloy due to the adsorption or tribochemistry reaction of a long chain additive molecule and high reaction activity of N element.

Shotgun lipidomic analysis of simple lipids in rapeseed oil by electrospray ionization tandem mass spectrometry

Rapeseed is widely grown in China as an important oil crop. In this study, Shotgun lipidomic methodology based on tandem mass spectrometry but without liquid chromatography was established for simple lipids analysis such as mono-, di-and triacylglycerols(MAGs, DAGs and TAGs) and the derivatives such as free fatty acids(FFAs). Six varieties of rapeseeds belonging to 3 types(B. juncea, B. campestris and B. oleracea) from different areas of China were investigated, with 59 TAG species, 10 DAG species, 5 MAG species and 6 FFA species identified. It was found that erucic acid was mainly present in the form of TAG 62:4(22:1/18:2/22:1), TAG 62:3(22:1/18:1/22:1), and TAG 62:5(22:1/18:3/22:1) in high erucic acid rapeseed oils, while oleic acid was mainly present in the form of TAG 54:2(18:0/18:1/18:1), and TAG 54:4(18:1/18:2/18:1) in high oleic acid rapeseed oils. It was difficult for DAG, MAG and FFA quantification due to their low content with high background content of TAGs. Results showed that the main differences in lipids were not derived from the types of rapeseed, but directly related to varieties.

Free fatty acids profiling in cold-pressed rapeseed oil pretreated by microwave

This study proposed a strategy based on simple chemical derivatization coupled with neutral loss scan tandem to electrospray ionization source of mass spectrometer (NLS-ESI-MS/MS) for rapid and sensitive detection of free fatty acids (FFAs) in coldpressed rapeseed oils without sample purification and enrichment. The method was applied to investigate contents of FFAs and their changes in cold-pressed rapeseed oil pretreated by microwave. Results showed that main FFAs in rapeseed oil control samples were myristic acid (C14:0), palmitic acid (C16:0), stearic acid (C18:0), oleic acid (C18:1), linoleic acid (C18:2) and linolenic acid (C18:3). The highest content of C18:1 was 7163.69 nmol/g and C18:2 was 5221.18 nmol/g among 8 oil samples. FFAs generally increased after microwave pretreatment except C14:0 in oil sample of ‘Xinyou 17’ and ‘Suyou 6’. C18:1 and C18:2 significantly changed (P<0.05) after microwave pretreatment. With this established simple,practical and reliable analysis approach, changes of FFAs would be monitored to ensure safety and quality of edible oils. A powerful tool is provided for thermal degradation mechanism research of edible oils.

Lubricating Performance of Rapeseed Oil Under Electromagnetic Field

Considering electromagnetic effect when investigating tribological properties of rapeseed oil is benefical not only to the improvement of green lubrication, but also to the development of tribology theories and practices. In the present paper, the tribological properties of rapeseed oil under different intensity of electromagnetic field and normal loads were evaluated on a modified tribo-tester. The results indicated that the electromagnetic field could improve the anti-wear and friction-reducing property of the rapeseed oil. Furthermore, the influencing mechanisms were discussed from the perspective of electromagnetism according to the analytical results of SEM, EDS and XPS techniques.