Rapid diagnostic method for transplutonium isotope production in high flux reactors

Transplutonium isotopes are scarce and need to be produced by irradiation in high flux reactors.However,their production is inefficient,and optimization studies are necessary.This study analyzes the physical nature of transplutonium isotope produc-tion using ^(252)Cf,^(244)Cm,^(242)Cm,and ^(238)Pu as examples.Traditional methods based on the Monte Carlo burnup calculation have the limitations of many calculations and cannot analyze the individual energy intervals in detail;thus,they cannot sup-port the refined evaluation,screening,and optimization of the irradiation schemes.After understanding the physical nature and simplifying the complexity of the production process,we propose a rapid diagnostic method for evaluating radiation schemes based on the concepts“single energy interval value(SEIV)”and“energy spectrum total value(ESTV)”.The rapid diagnostic method not only avoids tedious burnup calculations,but also provides a direction for optimization.The optimal irradiation schemes for producing ^(252)Cf,^(244)Cm,^(242)Cm,and ^(238)Pu are determined based on a rapid diagnostic method.Optimal irradiation schemes can significantly improve production efficiency.Compared with the initial scheme,the optimal scheme improved the production efficiency of ^(238)Pu by 7.41 times;^(242)Cm,11.98 times;^(244)Cm,65.20 times;and ^(252)Cf,15.08 times.Thus,a refined analysis of transplutonium isotope production is conducted and provides a theoretical basis for improving production efficiency.

Dengue virus infection:A review of advances in the emerging rapid detection methods

Dengue virus infections are increasing worldwide generally and in Asia,Central and South America and Africa,particularly.It poses a serious threat to the children population.The rapid and accurate diagnostic systems are essentially required due to lack of effective vaccine against dengue virus and the progressive spread of the dengue virus infection.The recent progress in developing micro-and nano-fabrication techniques has led to low cost and scale down the biomedical point-of-care devices.Starting from the conventional and modern available methods for the diagnosis of dengue infection,this review examines several emerging rapid and point-of-care diagnostic devices that hold significant potential for the progress in smart diagnosis tools.The given review revealed that an effective vaccine is required urgently against all the dengue virus serotypes.However,the rapid detection methods of dengue virus help in early treatment and significantly reduce the dengue virus outbreak.

Failure evaluation and control factor analysis of slope block instability along traffic corridor in Southeastern Tibet

The instability of slope blocks occurred frequently along traffic corridor in Southeastern Tibet(TCST),which was primarily controlled by the rock mass structures.A rapid method evaluating the control effects of rock mass structures was proposed through field statistics of the slopes and rock mass structures along TCST,which combined the stereographic projection method,modified M-JCS model,and limit equilibrium theory.The instabilities of slope blocks along TCST were then evaluated rapidly,and the different control factors of instability were analyzed.Results showed that the probabilities of toppling(5.31%),planar(16.15%),and wedge(35.37%)failure of slope blocks along TCST increased sequentially.These instability modes were respectively controlled by the anti-dip joint,the joint parallel to slope surface with a dip angle smaller than the slope angle(singlejoint),and two groups of joints inclined out of the slope(double-joints).Regarding the control effects on slope block instability,the stabilization ability of doublejoints(72.7%),anti-dip joint(67.4%),and single-joint(57.6%)decreased sequentially,resulting in different probabilities of slope block instability.Additionally,nearby regional faults significantly influenced the joints,leading to spatial heterogeneity and segmental clustering in the stabilization ability provided by joints to the slope blocks.Consequently,the stability of slope blocks gradually weakened as they approached the fault zones.This paper can provide guidance and assistance for investigating the development characteristics of rock mass structures and the stability of slope blocks.

A New Rapid and Batch-oriented Crushing Method for DNA Extraction from Maize Leaves

The crushing of leaves is the most time and effort-consuming part in DNA extraction which is a fundamental step in the study of molecular biology. In this study, a new rapid and batch-oriented crushing method for DNA extraction from maize leaves was developed. In addition, the practicability of the developed method in molecular marker-assisted breeding was verified using SSR molecular maker technology so as to provide a rapid, batch-oriented, low-cost and non-toxic leafcrushing method for a large number of molecular marker tests, improving test efficiency.

Study on the Rapid Method to Predict Longevity of Controlled Release Fertilizer Coated by Water Soluble Resin

The study discussed the rapid method to test and predict the longevity of controlled release fertilizers （CRFs） coated by water soluble resin by using the short-term leaching under higher temperature. Pure water dissolving incubation and higher temperature leaching were used to study the patterns of the nutrient release of the CRFs. The correlation analysis between the days at 25℃ and the hours at 80℃ of Trincote 1 and Trincote 2 for the same cumulative release rates were conducted. Patterns of cumulative nutrient release curve followed one factor quadratic regression equation at each given temperatures, and each of relative coefficient was bigger than 0.995. As the temperature increased, nutrients release of the CRFs increased. The longevity of resin coated CRFs were predicted by use of both the cumulative nutrients release equation at 80℃ and the regression equation of release time needed for the same cumulative release rates between 25 and 80℃. There were only 0.3-6.9% relative errors between the tested longevity and predicted one. In conclusion, the longevity of resin coated CRFs could be predicted more quickly and precisely by use of the higher temperature short-term leaching method than that of the traditional differential release rate. The longevity of resin coated CRF could be rapidly and precisely predicted in a few hours by application of the higher temperature shortterm leaching method.

Effect of rapidly depressurizing and rising temperature on methane hydrate dissociation

Two methods, rapidly depressurizing to 0.1 MPa at a constant temperature and rising temperature under equilibrium P, T conditions, were used to study the dissociation of pure CH4 hydrate formed below the ice point. At a constant temperature with rapidly depressurizing to 0.1 MPa, CH4 hydrate dissociated rapidly at initial dissociation and then the dissociation rate gradually decreased. However, the dissociation of CH4 hydrate at temperatures of 261 to 266 K was much faster than that at temperatures of 269 to 272 K, indicating its anomalous preservation. Under an equilibrium P, T conditions, rising temperature had extensively controlling impact on dissociation of CH4 hydrate at equilibrium pressures of 2.31, 2.16 and 1.96 MPa. In this study, we report the effect of pressure on CH4 hydrate dissociation, especially the effect of equilibrium pressure on dissociation at various melting temperatures. And we find that the ice particles size of CH4 hydrate formed may dominant the CH4 hydrate dissociation. Dissociation of CH4 hydrate formed from ice particles of smaller than 250 μm may not have an anomalous preservation below the ice point, while particles larger than 250 μm may have more extensive anomalous preservation.

Study on a noninvasive method for rapid screening Human Serum albumin injectables by Raman spectroscopy

Human serum albumin(HSA)injectable product is a severely afflicted area on drug safety due to its high price and restricted supply.Raman spectroscopy performances high specificity on HSA detection and it is even possible to determine HSA injectable products noninvasively.In this study,we developed a noninvasive rapid screening method for of HSA injectable products by using portable Raman spectrometer.Qualitative models were established by using principal component analysis combined with classical least squares(PCA-CLS)algorithm,while quanti-tative model was established by using partial least squares(PLS)algorithm.Model transfer in different instruments of both the same and different apparatus modules was further discussed in this paper.A total of 34 HSA injectable samples collected from markets were used for verification.The identification results showed 100%accuracy and the predicted concentrations of those identified as true HSA were consistent with their labeled concentrations.The quantitative results also indicated that model transfer was excellent in the same apparatus modules of Raman spectrometer at all concentration levels,and still good enough in the different apparatus modules although the relative standard deviation(RSD)value showed a little increasing trend at low HSA concentration level.In conclusion,the method was proved to be feasible and efficient for screening HSA injections,especially on its screening speed and the consideration of glass containers.Moreover,with inspiring results on the model transfer,the method could be used as a universal screening mean to different Raman instruments.

Tire Dynamics Modeling Method Based on Rapid Test Method

Combined with the tire dynamics theoretical model,a rapid test method to obtain tire lateral and longitudinal both steady-state and transient characteristics only based on the tire quasi-steady-state test results is proposed.For steady state data extraction,the test time of the rapid test method is half that of the conventional test method.For transient tire characteristics the rapid test method omits the traditional tire test totally.At the mean time the accuracy of the two method is much closed.The rapid test method is explained theoretically and the test process is designed.The key parameters of tire are extracted and the comparison is made between rapid test and traditional test method.The result show that the identification accuracy based on the rapid test method is almost equal to the accuracy of the conventional one.Then,the heat generated during the rapid test method and that generated during the conventional test are calculated separately.The comparison shows that the heat generated during the rapid test is much smaller than the heat generated during the conventional test process.This benefits to the reduction of tire wear and the consistency of test results.Finally,it can be concluded that the fast test method can efficiently,accurately and energy-efficiently measure the steady-state and transient characteristics of the tire.

Rapid Screening of 82 Pesticide Residues in Feed by Liquid Chromatography Coupled with Quadrupole-Time of Flight Mass Spectrometry

[Objectives]This study was conducted to establish a qualitative method for rapid detection of pesticide residues in feed.[Methods]A rapid screening method for 82 pesticide residues in feed was established using ultra liquid chromatography coupled with quadrupole-time of flight mass spectrometry(UPLC-Q-TOF-MS)combined with optimized pretreatment methods.[Results]Feed samples were extracted with 0.2%formic acid-acetonitrile solution,shaken,centrifuged,and re-centrifuged,and the supernatant was filtered with a 0.22μm filter membrane for determination.The samples were separated on a Waters ACQUITY UPLC HSS T3 chromatographic column(2.1 mm×50 mm,1.8μm),and subjected to gradient elution with methanol-water solution as the mobile phase,and scanning was performed in ESI+mode.82 compounds could be accurately qualitatively detected in 13 min.[Conclusions]This method is simple to operate,time-saving,and can be applied to rapid screening of large-scale feed.This study provides a theoretical basis for the development of new methods in the future.

Research on a Rapid Test Method of Dry Basis Weight of Paper-process Reconstituted Tobacco

This study aimed to optimize the rapid test factors of dry basis weight of reconstituted tobacco, in order to afford a reference test method for companies which produce reconstituted tobacco to better control the basis weight and coating ratio on line. The dry basis weight of reconstituted tobacco was tested by fast method and normal oven method individually. And the effects on the test values of different test factors such as temperature, time and the number of baking sheets were studied. Then the test values of these two methods were compared, so the proper factors of rapid test method were determined. As the baking temperature rose from 130 ℃ to 150 ℃, and the baking time rose from 1 min to 2 min, the difference between fast test method and normal oven method grew, and when the number of baking pieces rose from 3 pieces to 5 pieces, the difference between the two methods went down. The optimum test condition was baking temperature of 130 ℃, baking time of 1 min, and baking sample sheet number of 5. Under this condition, the value of fast test method was the closest to the test value of normal oven method, and meanwhile, the test factor was more proper for testing on line. The study will provide a reference for online controlling of dry basis weight and coating ratio of reconstituted tobacco.

Establishment of a Loop-mediated Isothermal Amplification Method for Rice Bacterial Leaf Brown Spot Disease

Rice bacterial leaf brown spot disease caused by Pseudomonas syringae pv.syringae(Pss)is a major disease on rice.In recent years,Pss has emerged worldwide,seriously affecting rice production.It is very important to establish a rapid detection method of Pss for the diagnosis and prevention of this disease.In order to robust and accurately diagnose the rice bacterial leaf brown spot disease in the field and laboratory,an assay system for the Pss was developed in this study,and the specific sequence of hrcN was used as the target,based on loop-mediated isothermal amplification(LAMP).The best detection system was MgSO 48 mmol·L^(-1),Bst DNA polymerase 8 U,dNTP 1.4 mmol·L^(-1),the ratio of internal and outer primers was 2:1,the reaction temperature was 63℃,the reaction time was 45 min,and the lowest sensitivity was 104 CFU·mL^(-1).This results provided an accurate and robust method for laboratory and field diagnosis of bacterial leaf brown spot disease of rice.

Calculation of ion diffusion coefficient related to concrete deterioration based on Debye-Hückel-Onsager theory

This paper applies the Debye-Hückel-Onsager electrolyte solution theory to investigate the diffusivity of ions in concrete pore solutions.First,a model of the diffusion coefficient associated with the ionic species,solution concentration and ambient temperature is proposed in the saturated concrete.Secondly,as an example,the effects of sodium chloride solution concentration,which are associated with influencing factors such as the ionic cloud radius,electrophoresis and relaxation,on the chloride diffusion coefficient are analyzed.It is found that the diffusion coefficient decreases with the increase in solution concentration,and the electrophoresis and ionic cloud radius are two important factors influencing the ionic diffusivity.Finally,the experiments,in which the chloride diffusion coefficients in specimens under different water-cement ratios are measured by the rapid chloride migration（RCM）method,are carried out to validate the effectiveness of the proposed model,and the results indicate that there is a generally reasonable agreement between the experimental and the proposed model results.

Evolution of microstructure in semi-solid slurries of rheocast aluminum alloy

Semi-solid metal processing is being developed in die casting applications to give several cost benefits. To efficiently apply this emerging technology, it is important to understand the evolution of microstructure in semi-solid slurries for the control of the theological behavior in semi-solid state. An experimental apparatus was developed which can capture the grain structure at different times at early stages to understand how the semi-solid structure evolves. In this technique, semi-solid slurry was produced by injecting fine gas bubbles into the melt through a graphite diffuser during solidification. Then, a copper quenching mold was used to draw some semi-solid slurry into a thin channel. The semi-solid slurry was then rapidly frozen in the channel giving the microstructure of the slurry at the desired time. Samples of semi-solid 356 aluminum alloy were taken at different gas injection times of 1, 5, 10, 15, 20, 30, 35, 40, and 45 s. Analysis of the microstructure suggests that the fragmentation by remelting mechanism should be responsible for the formation of globular structure in this rheocasting process.

Impacts of the Wenchuan Earthquake on the Giant Panda Nature Reserves in China

The Wenchuan Earthquake that occurred in May of 2008 caused damages to large areas of Sichuan,Gansu,and Shaanxi provinces in China.Reports from local governments and related management agencies show that the giant panda nature reserves in the earthquake-hit areas were heavily damaged.Our estimates in this paper of the impacts of the earthquake on the giant panda in the earthquake-hit areas were made based on the interpretation of remote sensing images and information collected by field survey.A rapid assessment method was designed to estimate the damages of the earthquake on giant panda habitats.By using visual interpretation methods,we decoded the remote sensing images of the disaster area in the 49 giant panda nature reserves.Research results showed that the Wenchuan Earthquake and the succeeding secondary geological disasters caused great damages to the giant panda nature reserves and disturbed the normal life of the giant pandas there (e.g.,landscape fragmentation increased significantly).Undoubtedly,the life of the giant pandas there was affected.However,although the earthquake caused certain impacts on the giant pandas,it did not really threat their survival.Even so,we still strongly advocate for protection of the giant pandas,and have prioritized a couple of measures to be taken to restore the giant panda nature reserves in the earthquake-hit areas.

YIG Thin Film for RF Integrated Inductor

The yttrium iron garnet（YIG） thin films prepared by the sol-gel method and rapid thermal annealing（RTA） process for integrated inductor are investigated. The X-ray diffraction（XRD） results indicate that the YIG film annealed above 650 ℃ is poly-crystalline with single-phase garnet structure. Moreover, it can be found that the initial permeability μi, saturation magnetization MS and coercivity Hc of these YIG films increase with increasing RTA temperature. Low temperature annealing after crystallization can further improve the magnetic properties of YIG film. Thereby, a planar integrated inductor in the presence of Si substrate/SiO2 layer/Y2.8Bi0.2Fe5O12 thin film/Cu spiral coil structure is fabricated successfully by the standard IC processes. Due to the magnetic enhancement originated from YIG film, the inductance L and quality factor Q of the inductor with YIG film are improved in a certain frequency range.

RESEARCH ON AUTOMATIC FOG IDENTIFICATION TECHNOLOGY BY METEOROLOGICAL SATELLITE REMOTE SENSING

There is an urgent need for the development of a method that can undertake rapid, effective, and accurate monitoring and identification of fog by satellite remote sensing, since heavy fog can cause enormous disasters to China’s national economy and people's lives and property in the urban and coastal areas. In this paper, the correlative relationship between the reflectivity of land surface and clouds in different time phases is found, based on the analysis of the radiative and satellite-based spectral characteristics of fog. Through calculation and analyses of the relative variability of the reflectivity in the images, the threshold to identify quasi-fog areas is generated automatically. Furthermore, using the technique of quick image run-length encoding, and in combination with such practical methods as analyzing texture and shape fractures, smoothness, and template characteristics, the automatic identification of fog and fog-cloud separation using meteorological satellite remote sensing images are studied, with good results in application.

Advances in the detec

Human health is threatened by foodborne illness and Staphylococcus aureus is a common foodborne pathogenic bacteria.It can cause food poisoning when we are infected,therefore,it is necessary to detect pathogenic bacteria.The virulence genes and detection methods of S.aureus are summarized from literatures.Traditional detection methods are simple but need bacteria enrichment and to prolong detection time.Immunological technology has high specificity,but false positive results are easy to occur in its detection.In recent years,molecular biology methods have developed rapidly,and various PCR techniques have been applied to detect foodborne pathogens.Real-time fluorescent quantitative PCR is more effective than ordinary PCR,while price is expensive when use it,the scope of use is limited.LAMP is a flexible detection method,biosensor and flow cytometry are fast but the cost of detection is high and the price is relatively expensive.

Community Soil Resources Management for Sub-Saharan West Africa： Case Study of the Gourma Region in Burkina Faso

A study on community soil fertility management concepts and practices was conducted through rapid and participatory method of research in 15 villages of the Gourma region in Eastern part of Burkina Faso. These investigations aimed at determining farmers＇ knowledge on soil resources： local soil taxonomy and indicators of soil degradation, soil fertility management practices, and capacity for adoption of new technologies in soil fertility management. The results of the study showed that the main parameter for soil classification for all the investigated villages was soil texture composition; soil degradation was evaluated according to crops yield decrease and the development Striga sp. in 100% of the investigated villages; the use of organic manure and long term fellow were the main practices for soil fertility management; concerning the villages where modem technologies of soil fertility management were introduced, the lack of tools and capacity building were the main limiting factors of the adoption of these improved practices at small scale farmers＇ level. Even if discordance between scientific and local soil taxonomy were revealed by our investigations; significant similarities between indigenous and scientific indices of soil degradation were noticed. With regard to the actual magnitude of soil degradation; the local techniques of soil fertility management need to be improved and accessible to a big number of farmers.

Unveiling multi-element synergy in polymetallic oxides for efficient nitrate reduction to ammonia

Electrocatalytic nitrate reduction reaction is considered as a promising and sustainable method for ammonia synthesis.However,the selectivity and yield rate of ammonia are limited by the competitive hydrogen evolution reaction and the complex eight-electron transfer process.Herein,we developed a(FeCoNiCu)Ox/CeO_(2)polymetallic oxide electrocatalyst for effective nitrate reduction to ammonia.The synergistic effects among the multiple elements in the electrocatalyst were clearly elucidated by comprehensive experiments.Specifically,Cu acted as the active site for reducing nitrate to nitrite,and Co facilitated the subsequent reduction of nitrite to ammonia,while Fe and Ni promoted water dissociation to provide protons.Furthermore,the incorporation of CeO_(2)increased the active surface area of(FeCoNiCu)Ox,resulting in an improved ammonia yield rate to meet industrial demands.Consequently,the(FeCoNiCu)Ox/CeO_(2)electrocatalyst achieved an ammonia current density of 382 mA cm^(-2)and a high ammonia yield rate of 30.3 mg h^(-1)cm^(-2)with a long-term stability.This work offers valuable insights for the future design of highly efficient multi-element electrocatalysts.

Rapid and efficient method for isolating plant high molecular weight(HMW)DNA with high purity

PREPARATION of HMW DNA (Megabase-size) is the basis for construction of genomic library with large DNA inserts such as bacterial artificial chromosome (BAC) and yeast artificial chromosome (YAC), and for long-range physical mapping. It can also be used for the macro-study of repeat sequences. Since HMW DNA during preparation is inclined to be sheared physically and digested by internal nucleases, it is very difficult to prepare the HMW DNA. Initially, plant HMW DNA was prepared by embedding protoplasts in the low melting-point (LMP) agarose; however, it had several disadvantages: (ⅰ) Culture of protoplasts was time-consuming, costly and tedious. ( ⅱ ) It was only used successfully for limited