Laser cladding in-situ carbide particle reinforced Fe-based composite coatings with rare earth oxide addition

Particulate reinforced metal matrix composite(PR-MMC) has excellent properties such as good wear resistance,corrosion resistance and high temperature properties.Laser cladding is usually used to form PR-MMC on metal surface with various volume fractions of ceramic particles.Recent literatures showed that laser melting of powder mixture containing carbon and carbide-forming elements,was favorable for the formation of in-situ synthesized carbide particles.In this paper,rare earth oxide(RE2O3) was added into t...

Effect of mixed rare earth oxides and CaCO_3 modification on the microstructure of an in-situ Mg_2Si/Al-Si composite

The effects of mixed rare earth oxides and CaCO3 on the microstructure of an in-situ Mg2Si/Al-Si hypereutectic alloy composite were investigated by optical microscope,scanning electron microscope,and energy dispersive spectrum analysis. The results showed that the morphol-ogy of the primary Mg2Si phase particles changed from irregular or crosses to polygonal shape,their sizes decreased from 75 μm to about 25 μm,and the compound of both the oxide and CaCO3 was better than either the single mixed rare earth o...

Preparation of Rare Earth Hydroxide and Oxide Nanoparticles by Precipitation Method

A series of rare earth hydroxide and oxide nanoparticles have been prepared by precipitation method with alcohol as the dispersive and protective reagent. Transmission electron microscope （TEM） images indicate that the particles are spherical in shape and smaller than 100 nm in size. The crystallite sizes of cubic Ln2O3 have lanthanide shrinking effect, while average crystal lattice distortion rates possess lanthanide swelling effect. The diffraction peak intensity of heavy rare earth oxide nanometer powders is remarkably stronger than that of light rare earth oxide nanometer powders. The variation of diffraction intensity with atomic number presents an inverted W type, forming a double peak structure. Fourier transform infrared （FTIR） spectrums reveal that Ln2O3 nanopowders have higher surface activity than that of ordinary Ln2O3 powders. The UV-vis spectra show that Ln-O bond of these particles is slightly blue-shifted, and its absorption intensity decreases.

Preparation and Characterization of Microporous Nano-Tungsten Trioxide and Its Photocatalytic Activity after Doping Rare Earth

Aqueous sols and gels of tungstic acid were prepared from Na2WO4 with protonated cation-exchange resin. Nano-tungsten oxide of a microporous lamella was synthesized by means of washing of WO3· 2H2O with distilled water under ultrasonic wave agitation and centrifuging repeatedly, and the specific surface area tended to increase gradually with washing and centrifuging. The sample of centrifuged 7 h has more than 2 times highs specific surface area and more high photocatalytic activity . The mechanisms are also discussed.

Mechanism of Cracking Resistance of Hardfacing Specimens of Steel 5CrNiMo Improved by Rare Earth Oxide

The cracking morphology of the hardfacing specimens taken from steel 5CrNiMo was observed. Meanwhile, the residual stress fields were measured and simulated. Based on experiment mentioned above, the improved structure and modified inclusion in hardfacing metal with rare earth （RE） oxide were analyzed. The results show that, the hardfacing crack is initiated from the coarse dendritic crystal grain boundary, inclusions and coarse austenite grain boundary in the HAZ and propagated by the residual stress existing in the center of the hardfacing metal and HAZ. The primary columnar grain structure can be refined by adding RE oxide in the coating of the electrode. The inclusion in the hardfacing metal can be modified as well. Meanwhile, if the martensite transformation temperature is decreased, the largest value of the residual tensile stress in the dangerous region can be reduced.

Preparation and Properties of Rare Earth Modified Carbon Black/Natural Rubber Composites

The oxides Eu, Ho, Er and Dy were used to prepare the hydroxides of rare earth modified carbon black. Then natural rubber latex （NRL） was added into the reactor. The system reacted at 85 ℃ with stirring for 1 h to prepare powdered HAF-Ln（OH）3/NR composites. The effects of the kind and content of Ln on the particle size distribution of P [ NR/HAF-Ln （OH）3 ] and mechanical properties of its vulcanizate were studied respectively. It is found that rare earth can help to get the powder of the composite, the product particle with a diameter less than 0.9mm will be get when the composites containing the compound of Ho, Er and Dy with dosage of 1.0, 1.0, O. 5 percent, respectively. The adding of Ln can improve the tensile strength and tear strength of the vulcanizate effectively, what＇s more, Er and Dy can decrease the permanent set of vulcanizate significantly. The SEM studies shows that P[ NR/HAF-Dy （OH）3 ] vulcanizate shows superior mechanical properties that depend primarily on the absence of free carbon black, the fine dispersion of carbon black in the rubber matrix and better polymer-filler interaction.

Phase Behavior of Rare Earth Manganites

Among complex oxides containing rare earth and manganese BaLn_2Mn_2O_7 (Ln=rare earth) with the layered perovskite type and Ln_2(Mn, M)O_7 with pyrochlore-related structure were studied since these compounds show many kinds of phases and unique phase transitions. In BaLn_2Mn_2O_7 there appear many phases, depending on the synthetic conditions for each rare earth. The tetragonal phase of so-called Ruddlesden-Popper type is the fundamental structure and many kinds of deformed modification of this structure are obtained. For BaEu_2Mn_2O_7 at least five phases have been identified from the results of X-ray diffraction analysis with the space group P4_2/mnm, Fmmm, Immm and A2/m in addition to the fundamental tetragonal I4/mmm phase. In the pyrochlore-related type compounds, Ln_2Mn_(2-x)M_xO_7 (M=Ta, Nb, W etc), there also appear several phases with different crystal structures. With regard to every rare earth, Ln_2MnTaO_7 phase is stable only for excess Ta and can be obtained under high oxygen partial pressure process. This group has trigonal structure with zirkelite type (P3_121 space group). On the other hand Ln_2Mn_(2/3)Nb_(4/3)O_7 phase has monoclinic (C2/c space group) and zirconolite type structure. All of these structural models have the fundamental structure based on HTB (hexagonal tungsten bronze) layers formed by the arrangement of oxygen octahedra.

Phase Behavior and Crystal Structure of Perovskite-Type Rare Earth Complex Oxides

Several compounds of rare earth complex oxides containing manganese and titanium were synthesized in Ar, and their crystal structures were analyzed by powder X-ray diffraction data and Rietveld method. Structures of A0.67Ln0.33 Mn0.33Ti0.6703（A = Ca or Sr and Ln = rare earth） were found to have orthorhombic symmetry with the space group Pnrna, and their interatomic distances and bond angles were obtained. This space group was also derived from electron microscopic study. Electrical conductivity of Cao.67Ln0.33Mn0.33Ti0.6703 for several rare earth elements showed a semiconducting property with the activation energy of 0.4 eV. Some of these compounds of the strontium system show the antiferromagnetic properties below 10 K.

Hydrogen production from coke oven gas over LiNi/γ-Al_2O_3 catalyst modified by rare earth metal oxide in a membrane reactor

The performance of LiNi/γ-Al2O3 catalysts modified by rare earth metal oxide （La2O3 or CeO2） packed on BCFNO membrane reactor was discussed for the partial oxidation of methane （POM） in coke oven gas （COG） at 875 ℃. The NiO/γ-Al2O3 catalysts with different amounts of La2O3 and CeO2 were prepared with the same preparation method and under the same condition in order to compare the reaction performance （oxygen permeation, CH4 conversion, H2 and CO selectivity） on the membrane reactor. The results show that the oxygen permeation flux increased significantly with LiNiREOx/γ-Al2O3 （RE = La or Ce） catalysts by adding the element of rare earth especially the Ce during the POM in COG. Such as, the Li15wt%CeO29wt%NiO/γ-Al2O3 catalyst with an oxygen permeation flux of 24.71 ml·cm^-2·min^-1 and a high CH4 conversion was obtained in 875 ℃. The resulted high oxygen permeation flux may be due to the added Ce that inhibited the strong interaction between Ni and Al2O3 to form the NiAl2O4 phase. In addition, the introduction of Ce leads up to an important property of storing and releasing oxygen.

Roles of rare earth oxide additives in millimeter-wave sintering of AlN

Roles of rare earth oxide （RE2O3） additives in millimeter-wave（MM） sintering of AIN were investigated from the standpoints of phase diagram, heating characteristics of rare earth oxides, and morphology of intergranular oxide phase. In the millimeter-wave sintering of AIN, densification temperature decreased with the decrease of the ionic radius of rare earth ion and was closely related with the eutectic temperature in the RE2Oa-Al2O3 binary system. The lowest densification temperature in the millimeter-wave sintering of AIN with Yb2O3 additive was attributed to the largest heating rate of Yb2O3-Al2O3 binary oxide under millimeter-wave radiation. Furthermore, the lowest densification temperature could be attained while selecting the Yb2O3 content so as to form the intergranular phase with the eutectic composition in the Yb2O3-Al2O3 binary system. The result showed good agreement with the above mentioned during the sintering of Si3N4 with Yb2O3-Al2O3 additive. From TEM observation, it was verified that film-like intergranular oxide phase formed under millimeter-wave radiation was favorable for attaining high thermal conductivity in the Yb2O3 added AINs.

Effects of flaky rare earth oxide additives on the high temperature performance of nickel electrodes

Effects of flaky rare earth oxide additives including Er2O3,Tm2O3,and Yb2O3,Lu2O3 on high temperature and high rate discharge performance of nickel electrodes were investigated.The discharge efficiency at 0.2C reached 96% at 60 oC for electrodes with 1 at.% flaky rare earth oxides.The high rate discharge performance for electrodes with flaky rare earth oxides were improved significantly,for example,discharge efficiency at 5C improved from 50% to 70%.The results showed that the end charging potential of the ...

Effects of Rare Earth Oxides on Viscosity,Thermal Expansion,and Structure of Alkali-Free Boro-Aluminosilicate Glass

Effects of rare earth oxides（Y2O3,La2O3,and Er2O3） on the viscosity,thermal expansion,and structure of alkali-free boro-aluminosilicate glasses were investigated by the rotating crucible viscometer,dilatometry and FT-IR absorption spectra.The results showed that the melting temperature of alkali-free boroaluminosilicate glasses decreased from 1 697.55 to 1 662.59,1 674.37 and 1 640.87 ℃ with the introduction of 1 mol%La2O3,Y2O3 and Er2O3,respectively.However,the glass transition temperature Tg,dilatometric softening temperature T_d and coefficient of thermal expansion of alkali-free boro-aluminosilicate glasses increased when adding the rare-earth oxides.At high temperatures,incorporating rare earth oxides into glass resulted in the peak at about 1 085 cm^-1 towards lower wavenumber and the absorption band in the region of 850-1 260 cm^-1 broader,which indicated that rare earths acted as network modifiers and increased the numbers of non-bridging oxygen in the glass melts.However,the rare earths had an opposite effect and accumulated the glass structure at low temperatures near Tg.

Effect of Roasting Conditions of Rich Cerium Rare Earth Carbonate on Crystallite Morphology and Polishing Ability of Ceria-Based Rare Earth Oxide

The granule shape and crystal structure of the the ceria-based rare earth oxide which were roasted at 600～1050 ℃ for 2～6 h and then cooled in furnace, cooled out of furnace or cooled in water were studied by means of XRD and SEM. The results revealed that the rich cerium rare earth carbonate could be changed into the rare earth oxide which was a kind of sandwich made of globose granule whose diameter was between 0.5～3.0 μm after being roasted in 900 ℃ for 2 h. This kind of crystal lattice in rare earth oxide belonged to face-centered cubic lattice and its space between crystal surface {111} and {200} (viz. L111 and L200) would enlarge as the roasting temperature increasing. With increasing roasting temperature, L111 would rise straightly upward, and L200 would rise straightly upward when roasting time was 2～4 h but changed little when roasting time was 4～6 h. The glass-polishing experiments found that the polishing ability of the ceria-based rare earth oxide was the best as L111 was 43～53 nm and the L200 was 43～56 nm.

Effect of rare earth La_2O_3 on the microstructure and mechanical properties of TiC/W composites

In this study, La2O3 was investigated as an additive to TiC/W composites. The composites were prepared by vacuum hot pressing, and the microstructure and mechanical properties of the composites were investigated. Experimental results show that the grain size of the TiC/W composites is reduced by TiC particles. When 0.5 wt.% La2O3 is added to the composites, the grain size is reduced further. According to TEM analysis, La2O3 can alleviate the aggregation of TiC particles. With La2O3 addition, the relative density of the TiC/W composites can be improved from 95.1% to 96.5%. The hardness and elastic modulus of the TiC/W ＋ 0.5 wt.% La2O3 composite are little improved, but the flexural strength and the fracture toughness increase to 796 MPa and 10.07 MPa·m^1/2 respectively, which are higher than those of the TiC/W composites.

Study on rare earth/alkaline earth oxide-doped CeO_2 solid electrolyte

Five types of rare earth/alkaline earth oxide-doped CeO2 superfine-powders were synthesized by a low-temperature combustion technique. The relevant solid electrolyte materials were also sintered by pressureless sintering at different temperatures. The results of X-ray diffraction and transmission electron microscopy showed that the grain size of the powders was approximately 20-30 nm, and rare earth/alkaline earth oxides were completely dissolved into ceria-based solid solution with fluorite structure. The electrical conductivities of the SmzO3-CeO2 system were measured by the ac impedance technique in air at temperatures ranging from 513-900℃. The results indicated that the ionic conductivities of Srno.2oCe0.8Ol.875 solid electrolyte increase with increasing sintering temperature, and the relationship between the conductivities and measuring temperature obeys the An＇henius equation. Then the SmzO3-CeO2 material was further doped with other rare earth/alkaline earth oxide, and the conductivities improve with the effective index.

Electric-magnetic-force characteristics of rare earth barium copper oxide superconductor high-field coils based on screening effect and strain sensitivity

Rare earth barium copper oxide(REBCO)is the most researched and commercialized second-generation high-temperature superconducting material.Due to the anisotropic structure,strong deformation sensitivity,and central field errors caused by screening current effects,it is still a challenge for commercialization applications.In this study,the transversely isotropic constitutive relationship is selected as the mechanical model based on the structural characteristics of REBCO tapes,and suitable microelements are selected to equate the elastic constants using their average stress-strain relationships.Then,a two-dimensional axisymmetric model for coils wound by single-layer tapes is constructed to analyze the dependence of the electric-magnetic-force distribution in the tape on the strain.Finally,the anisotropic approximation of the homogenized bulk method is used to equate large-turn high-field coils,and the electric-magnetic-force distribution characteristics of the coils with/without screening effects and mechanical strain conditions are investigated,respectively.The results reveal that the mechanical strain has a weakening effect on the electromagnetic field distribution of superconducting tapes,but causes a significant enhancement in the force field distribution.In the presence of 0.5% mechanical strain,the maximum weakening of the peak value of the current density and the critical current density inside the high-field coil can reach about 8% and 13%,respectively,with a nearly 5 times increase in the peak stress.The screening current makes the current field distribution inside the coil improve by about 10 times.The screening current induced magnetic field can reach up to 0.8 T,making the relative error of the high-field coil center up to 7.8%.

Rare earth effect on the microstructure and tribological properties of FeNiCr coatings

FeNiCr alloys with various amounts of La2O3 powders were thermally sprayed onto steel substrate.Electron probe microscopy analysis （EPMA）,X-ray photoelectron spectroscopy （XPS）,and an Optimol SRV oscillating friction and wear tester in a ball-on-disc contact configuration were employed to investigate the properties of the sprayed coatings.The results show that rare earth can refine the microstructure effectively and make the element distribution uniform,which leads to the improvement in the properties of the coatings.Meanwhile,the wear rate of the FeNiCr alloy with 1.5% La2O3 is smaller than those of the other coatings.Interestingly,the rare earth can reduce the friction coefficient and act as a self-lubricant in the oxide debris layer formed on the worn surface in friction.The wear mechanism of the coatings is oxidation wear,and a large amount of counterpart material is transferred to the coatings.

Effects of rare earth oxide additives on the thermal behaviors of aluminum nitride ceramics

The effects of Y2O3 and Er2O3 on the sintering behaviors, thermal properties and microstructure of A1N ceramics were investigated. The experimental results show that the sintering temperature can be decreased; the relative density and thermal behavior can be improved by adding rare earth oxide in A1N ceramics. For A1N ceramics with 3 wt.% Er2O3 additive, the relative density is 98.8%, and the thermal conductivity reaches 106 W.m^-1.K^-1. The microstructure research found that no obvious aluminum erbium oxide was found in A1N ceramics doped with 3 wt.% Er203, which favored the improvement of the thermal conductivity of A1N ceramics.

Glass-forming Ability and Chemical Stability of Magneto-optical Glass Heavily Doped with Rare Earth Oxide

The glass-forming region of B2O3-Al2O3-SiO2 （BAS） glass heavily doped with rare earth oxides was investigated by an effective method, and the chemical stability was investigated by powder method. Influences of rare earth oxides on the glass-forming ability and the chemical stability of the BAS glass were also discussed. The experimental results show that the BAS glass-forming region expands firstly with the increase of the Tb2O3 content up to 30mol% and then shrinks. The acid-resistant capacity of the BAS glass doped with rare earth oxides is the lowest, the water-resistant capacity is secondary, and the alkali-resistant capacity is the best. Besides, the glass chemical stability can be improved by doping appropriate amount of rare earth oxides. Moreover, the stronger the ionic polarization ability of the rare earth ions is, the better the chemical stability of the BAS glass will be.

Phase Behavior of BaLn_2Mn_2O_7 (Ln=Rare Earth) with a Layered Perovskite Structure

Many phases appear in BaLn 2Mn 2O 7 family (Ln=rare earth) belonging to one of the Ruddlesden-Popper type compounds, depending upon the experimental conditions such as heating conditions when prepared and composition. Some of these phases were characterized by powder X-ray diffraction method using Rietveld analysis. These phases have only a little difference in crystal structure which has fundamentally K 2NiF 4 type structure, although the X-ray diffraction patterns are clearly different: a little deformation or tilting of the oxygen octahedron surrounding a central manganese ion composing the main frame of this structure induce these different diffraction patterns. Phase behavior of these compounds, mainly the detailed relation between various phases in BaTb 2Mn 2O 7, was refined including the data of high temperature X-ray diffractometry.