研究了稀土元素铈对化学镀Co Fe B合金工艺的影响。在正交试验的基础上以称重法分析了稀土元素铈加入前后主盐、还原剂、络合剂、缓冲剂等对沉积速率的影响。结果表明,在稀土元素铈加入后,化学镀Co Fe B合金的沉积速率有不同程度的提高...研究了稀土元素铈对化学镀Co Fe B合金工艺的影响。在正交试验的基础上以称重法分析了稀土元素铈加入前后主盐、还原剂、络合剂、缓冲剂等对沉积速率的影响。结果表明,在稀土元素铈加入后,化学镀Co Fe B合金的沉积速率有不同程度的提高,并结合镀层质量,得出化学镀Co Fe B合金最佳镀覆工艺。展开更多
Rare earth permanent magnets Sm（Co, Fe, Cu, Zr）z with outstanding performance and high-temperature thermal stability were fabricated. Optimized by Fe content and process, Sm（Co0.72Fe0.15Cu0.1Zr0.03）7.5 magnet with...Rare earth permanent magnets Sm（Co, Fe, Cu, Zr）z with outstanding performance and high-temperature thermal stability were fabricated. Optimized by Fe content and process, Sm（Co0.72Fe0.15Cu0.1Zr0.03）7.5 magnet with B1〉0.75 T and Hci〉1300 kA/m at 300 ℃ can be obtained. According to the performance data of Sm（Co0.72Fe0.15Cu0.1Zr0.03）7.5, the magnetic field along central axis Bz in periodic permanent magnet （PPM） focusing system was simulated using electromagnetic field analysis software Maxwell 2D/3D. The Bz exhibited typical cosine curve along central axis, and the peak value of Bz was high enough to meet the demand of PPM focusing system at room temperature even at 200±20 ℃. Additionally, a kind of simple cooling structure for PPM focusing system was designed by setting cooling pipe between polepieces. Simulated results showed that smooth cosine curve of Bz was successfully achieved with good control of the thickness of cooling pipe.展开更多
Effect of Co substitution and annealing treatment on the formation, magnetic properties and microstructure of （NdDyTb）12.3（FeZrNbCu）81.7.xCoxB6 （x=0-15） ribbons prepared by rapid quenching and subsequent anneali...Effect of Co substitution and annealing treatment on the formation, magnetic properties and microstructure of （NdDyTb）12.3（FeZrNbCu）81.7.xCoxB6 （x=0-15） ribbons prepared by rapid quenching and subsequent annealing was systematically investigated by means of differential scanning calorimeter （DSC）, X-ray diffraction （XRD）, high resolution scanning electron microscopy （HRSEM） and vibrating sample magnetometer （VSM）. Phase analysis revealed single-phase material. The remanence polarization Jr and maximum energy product （BH）max increased with increasing x from 0 to 12 and then decreased for x=15. The intrinsic coercivity Hci of （NdOyTb）12.3 （FeZrNbCu）81.7-xCoxB6 ribbons optimally processed decreased from 1308.7 kA/m for x=0 to 817.4 kA/m for x=15. Optimum magnetic properties with Jr=1.041 T, Hci=944.9 EA/m and （BH）max=155.1 kJ/m^3 were achieved by annealing melt-spun ribbon （x=12） at 675 ℃ for 10 min. There was no significant influence of Co substitution on microstructure.展开更多
基金the National Basic Research Program (973) (2007CB31407)the International S&T Cooperation Program of China (2006DFA53410)
文摘Rare earth permanent magnets Sm（Co, Fe, Cu, Zr）z with outstanding performance and high-temperature thermal stability were fabricated. Optimized by Fe content and process, Sm（Co0.72Fe0.15Cu0.1Zr0.03）7.5 magnet with B1〉0.75 T and Hci〉1300 kA/m at 300 ℃ can be obtained. According to the performance data of Sm（Co0.72Fe0.15Cu0.1Zr0.03）7.5, the magnetic field along central axis Bz in periodic permanent magnet （PPM） focusing system was simulated using electromagnetic field analysis software Maxwell 2D/3D. The Bz exhibited typical cosine curve along central axis, and the peak value of Bz was high enough to meet the demand of PPM focusing system at room temperature even at 200±20 ℃. Additionally, a kind of simple cooling structure for PPM focusing system was designed by setting cooling pipe between polepieces. Simulated results showed that smooth cosine curve of Bz was successfully achieved with good control of the thickness of cooling pipe.
文摘Effect of Co substitution and annealing treatment on the formation, magnetic properties and microstructure of （NdDyTb）12.3（FeZrNbCu）81.7.xCoxB6 （x=0-15） ribbons prepared by rapid quenching and subsequent annealing was systematically investigated by means of differential scanning calorimeter （DSC）, X-ray diffraction （XRD）, high resolution scanning electron microscopy （HRSEM） and vibrating sample magnetometer （VSM）. Phase analysis revealed single-phase material. The remanence polarization Jr and maximum energy product （BH）max increased with increasing x from 0 to 12 and then decreased for x=15. The intrinsic coercivity Hci of （NdOyTb）12.3 （FeZrNbCu）81.7-xCoxB6 ribbons optimally processed decreased from 1308.7 kA/m for x=0 to 817.4 kA/m for x=15. Optimum magnetic properties with Jr=1.041 T, Hci=944.9 EA/m and （BH）max=155.1 kJ/m^3 were achieved by annealing melt-spun ribbon （x=12） at 675 ℃ for 10 min. There was no significant influence of Co substitution on microstructure.
