To improve the coercivity and temperature stability of Nd-Fe-B sintered magnets for high-temperature applications,the eutectic Tb_(80)Fe_(20)(wt%)alloy powders were added into the Nd-Fe-B sintered magnets by intergran...To improve the coercivity and temperature stability of Nd-Fe-B sintered magnets for high-temperature applications,the eutectic Tb_(80)Fe_(20)(wt%)alloy powders were added into the Nd-Fe-B sintered magnets by intergranular method to enhance the coercivity(H_(cj))and thermal stability.The micro structure,magnetic properties and thermal stability of the Nd-Fe-B magnets with different Tb_(80)Fe_(20)contents were studied.The experimental results demonstrate that the coercivity(H_(cj))of the sintered Nd-Fe-B magnet is significantly enhanced from 14.12 to 27.78 kOe,and the remanence(Br)decreases not obviously by introducing 4 wt%Tb_(80)Fe_(20)alloy.Meanwhile,the reversible tempe rature coefficients of coercivity(β)and remanence(α)of the Nd-Fe-B magnets are increased from-0.5634%/℃to-0.4506%/℃and-0.1276%/℃to-0.1199%/℃at 20-170℃,respectively.The Curie temperature(TC)of the Nd-Fe-B magnet is slightly enhanced with the increase of Tb_(80)Fe_(20)content.Moreover,the irreversible flux magnetic loss(hirr)is obviously reduced as Tb80Fe20addition increases.Further analysis of the microstructure reveals that a modified microstructure,i.e.clear and continuous RE-rich grain boundary layer,is acquired in the sintered magnets by introducing Tb_(80)Fe_(20)alloy.The associated mechanisms on improved coercivity and thermal stability were comprehensively researched.展开更多
A sintered（Nd_（0.8）Pr_（0.2））_（30.7）FebalB_（0.98）Cu_（0.2） magnet with 3% intergranular Dy_（85）Ni_（15） additive is prepared to study the magnetic properties and thermal stability of the Nd-Fe-B magnet. T...A sintered（Nd_（0.8）Pr_（0.2））_（30.7）FebalB_（0.98）Cu_（0.2） magnet with 3% intergranular Dy_（85）Ni_（15） additive is prepared to study the magnetic properties and thermal stability of the Nd-Fe-B magnet. The results show that the magnet with or without additive obtains its optimum comprehensive magnetic properties at the sintering temperature of 1 030 ℃ and 1 040 ℃, respectively. The maximum coercivity of the magnet with additive reaches 15.16 k Oe, while that of the magnet without additive is just 11.88 k Oe. Further investigation on microstructure indicates that the grains of the magnet with additive form a modified ＂core shell＂ structure. Adding Dy_（85）Ni_（15） can significantly enhance the coercivity of Nd-Fe-B magnet and thus decrease its coercivity temperature coefficient.展开更多
The substitution of Fe by Co in the 2:14:1 phase is an effective method to increase the Curie temperature and enhance the thermal stability of the Nd-Fe-B magnets.However,the accumulation of Co ele ment at the grain b...The substitution of Fe by Co in the 2:14:1 phase is an effective method to increase the Curie temperature and enhance the thermal stability of the Nd-Fe-B magnets.However,the accumulation of Co ele ment at the grain boundaries(GBs) changes the GBs from nonmagnetic to ferromagnetic and causes the thinlayer GBs to become rare,In this paper,the method of diffusing Tb element was chosen to improve the microstructure and temperature stability of high-Co magnets.Three original sintered Nd_(28.5)Dy_(3)-CO_(x)e_(bal)M_(0.6)B_(i)(x=0,6 wt%,12 wt%;M = Cu,Al,Zr) magnets with different Co contents were diffused with Tb by grain boundary diffusion(GBD).After GBD,high-Co magnets exhibit more continuously distributed thin-layer GBs,and their thermal stability is significantly improved.In high-Co magnets(x=6 wt%),the absolute value of the temperature coefficient of coercivity decreases from 0.603%/K to0.508%/K in the temperature range of 293-413 K,that of remanence decreases from 0.099%/K to 0.091%/K,and the coercivity increases from 18.44 to 25.04 kOe.Transmission electron microscopy(TEM)characterization reveals that there are both the 1:2 phase and the amorphous phase in the high-Co magnet before and after GBD,EDS elemental analysis shows that Tb element is more likely to preferentially replace the rare earth elements in the 2:14:1 main phase than in the 1:2 phase and the amorphous phase.The concentration of Tb at the edge of the main phase is much higher than that in the 1:2phase and amorphous phase,which is beneficial to the improvement of the microstructure.The preferential replacement of Tb elements at the edge of the 2:14:1 phase and thin-layer GBs with a more continuous distribution are synergistically responsible for improving the thermal stability of high-Co magnets.The study indicates that GBD is an effective method to improve the microstructure and thermal stability of high-Co magnets.展开更多
钐铁氮化合物(Sm_(2)Fe_(17)N_(3))因具有比钕铁硼(Nd_(2)Fe_(14)B)更高的磁晶各向异性场和居里温度值及更少的稀土含量,成为新型稀土永磁材料研究热点。但是,由于钐铁氮在600℃左右会分解导致永磁性能消失,因此常规的高温烧结工艺并不...钐铁氮化合物(Sm_(2)Fe_(17)N_(3))因具有比钕铁硼(Nd_(2)Fe_(14)B)更高的磁晶各向异性场和居里温度值及更少的稀土含量,成为新型稀土永磁材料研究热点。但是,由于钐铁氮在600℃左右会分解导致永磁性能消失,因此常规的高温烧结工艺并不适用于钐铁氮烧结磁体的制备,现只能将其与高分子材料复合用作塑磁材料,这就导致Sm_(2)Fe_(17)N_(3)的磁学性能无法得到充分发挥。因此,开发低温成型工艺制备全金属高密度块状磁体是获取高性能钐铁氮磁体的关键。经过30多年的努力,科研人员已开发出多种制备钐铁氮磁体的低温快速成型工艺,并获得最大磁能积达到199 k J/m^(3)的高性能磁体。本研究将从磁体的制备方法出发,总结当前块状钐铁氮磁体的研究现状及面临的问题,尤其针对不同成型方法出现矫顽力下降的现象提出分析,并对其今后的发展做出展望。展开更多
基金Project partly supported by the Natural Science Foundation of Shanxi Province,China(201801D121100)the Program for the Outstanding Innovative Teams of Higher Learning Institutions of Shanxi(OIT)the Scientific and Technological Innovation Programs of Higher Education Institutions in Shanxi(STIP)(201802033)。
文摘To improve the coercivity and temperature stability of Nd-Fe-B sintered magnets for high-temperature applications,the eutectic Tb_(80)Fe_(20)(wt%)alloy powders were added into the Nd-Fe-B sintered magnets by intergranular method to enhance the coercivity(H_(cj))and thermal stability.The micro structure,magnetic properties and thermal stability of the Nd-Fe-B magnets with different Tb_(80)Fe_(20)contents were studied.The experimental results demonstrate that the coercivity(H_(cj))of the sintered Nd-Fe-B magnet is significantly enhanced from 14.12 to 27.78 kOe,and the remanence(Br)decreases not obviously by introducing 4 wt%Tb_(80)Fe_(20)alloy.Meanwhile,the reversible tempe rature coefficients of coercivity(β)and remanence(α)of the Nd-Fe-B magnets are increased from-0.5634%/℃to-0.4506%/℃and-0.1276%/℃to-0.1199%/℃at 20-170℃,respectively.The Curie temperature(TC)of the Nd-Fe-B magnet is slightly enhanced with the increase of Tb_(80)Fe_(20)content.Moreover,the irreversible flux magnetic loss(hirr)is obviously reduced as Tb80Fe20addition increases.Further analysis of the microstructure reveals that a modified microstructure,i.e.clear and continuous RE-rich grain boundary layer,is acquired in the sintered magnets by introducing Tb_(80)Fe_(20)alloy.The associated mechanisms on improved coercivity and thermal stability were comprehensively researched.
基金Supported by the National Natural Science Foundation of China(51172168,51072139)the National Basic Research Program of China(973 Program)(2014DFB50130,2011CB612304)
文摘A sintered（Nd_（0.8）Pr_（0.2））_（30.7）FebalB_（0.98）Cu_（0.2） magnet with 3% intergranular Dy_（85）Ni_（15） additive is prepared to study the magnetic properties and thermal stability of the Nd-Fe-B magnet. The results show that the magnet with or without additive obtains its optimum comprehensive magnetic properties at the sintering temperature of 1 030 ℃ and 1 040 ℃, respectively. The maximum coercivity of the magnet with additive reaches 15.16 k Oe, while that of the magnet without additive is just 11.88 k Oe. Further investigation on microstructure indicates that the grains of the magnet with additive form a modified ＂core shell＂ structure. Adding Dy_（85）Ni_（15） can significantly enhance the coercivity of Nd-Fe-B magnet and thus decrease its coercivity temperature coefficient.
基金supported by the National Key R&D Program of China (2021YFB3502902,2021YFB3503100,2022YFB3503300,2022YFB3505200)。
文摘The substitution of Fe by Co in the 2:14:1 phase is an effective method to increase the Curie temperature and enhance the thermal stability of the Nd-Fe-B magnets.However,the accumulation of Co ele ment at the grain boundaries(GBs) changes the GBs from nonmagnetic to ferromagnetic and causes the thinlayer GBs to become rare,In this paper,the method of diffusing Tb element was chosen to improve the microstructure and temperature stability of high-Co magnets.Three original sintered Nd_(28.5)Dy_(3)-CO_(x)e_(bal)M_(0.6)B_(i)(x=0,6 wt%,12 wt%;M = Cu,Al,Zr) magnets with different Co contents were diffused with Tb by grain boundary diffusion(GBD).After GBD,high-Co magnets exhibit more continuously distributed thin-layer GBs,and their thermal stability is significantly improved.In high-Co magnets(x=6 wt%),the absolute value of the temperature coefficient of coercivity decreases from 0.603%/K to0.508%/K in the temperature range of 293-413 K,that of remanence decreases from 0.099%/K to 0.091%/K,and the coercivity increases from 18.44 to 25.04 kOe.Transmission electron microscopy(TEM)characterization reveals that there are both the 1:2 phase and the amorphous phase in the high-Co magnet before and after GBD,EDS elemental analysis shows that Tb element is more likely to preferentially replace the rare earth elements in the 2:14:1 main phase than in the 1:2 phase and the amorphous phase.The concentration of Tb at the edge of the main phase is much higher than that in the 1:2phase and amorphous phase,which is beneficial to the improvement of the microstructure.The preferential replacement of Tb elements at the edge of the 2:14:1 phase and thin-layer GBs with a more continuous distribution are synergistically responsible for improving the thermal stability of high-Co magnets.The study indicates that GBD is an effective method to improve the microstructure and thermal stability of high-Co magnets.
文摘钐铁氮化合物(Sm_(2)Fe_(17)N_(3))因具有比钕铁硼(Nd_(2)Fe_(14)B)更高的磁晶各向异性场和居里温度值及更少的稀土含量,成为新型稀土永磁材料研究热点。但是,由于钐铁氮在600℃左右会分解导致永磁性能消失,因此常规的高温烧结工艺并不适用于钐铁氮烧结磁体的制备,现只能将其与高分子材料复合用作塑磁材料,这就导致Sm_(2)Fe_(17)N_(3)的磁学性能无法得到充分发挥。因此,开发低温成型工艺制备全金属高密度块状磁体是获取高性能钐铁氮磁体的关键。经过30多年的努力,科研人员已开发出多种制备钐铁氮磁体的低温快速成型工艺,并获得最大磁能积达到199 k J/m^(3)的高性能磁体。本研究将从磁体的制备方法出发,总结当前块状钐铁氮磁体的研究现状及面临的问题,尤其针对不同成型方法出现矫顽力下降的现象提出分析,并对其今后的发展做出展望。
