For the goal of sulfur recovery, most methods are aimed at the tail gas with high-concentration H2S, but few effective methods are used for low-concentration H2S. In this work, Low-concentration H2S could be purified ...For the goal of sulfur recovery, most methods are aimed at the tail gas with high-concentration H2S, but few effective methods are used for low-concentration H2S. In this work, Low-concentration H2S could be purified well by liquid phase catalytic oxidation (LCO), and the sulfur resource could also be recovered. The absorption solution was prepared by FeCl3 and sulfosalicylic acid. Under the experimental conditions, the conversion of H2S to S could be maintained above 94% at 60 ℃. In order to enhance the economical efficiency of LCO method, the absorption solution was modified by doping Ce, and a series of experiments were designed to investigate its performance. The results showed that the conversion of H2S had no obvious improvement, but above 98% conversion could be gained at 60 ℃, and the H2S conversion rate was enhanced. The optimum addition quality of Ce(NO3)3 was 0.08 g to 50 ml Fe3+ solution.展开更多
Fe/Cu/Ce modified coal-based activated carbon(AC) was prepared by the sol-gel method,and the effect of Fe/Cu/Ce on catalytic properties of Fe/AC,Fe-Cu/AC and Fe-Cu-Ce/AC was investigated in the hydrolysis of carbonyl ...Fe/Cu/Ce modified coal-based activated carbon(AC) was prepared by the sol-gel method,and the effect of Fe/Cu/Ce on catalytic properties of Fe/AC,Fe-Cu/AC and Fe-Cu-Ce/AC was investigated in the hydrolysis of carbonyl sulfide(COS) at 50 °C.Their surface properties were evaluated by means of nitrogen adsorption and were characterized by using scanning electron microscopy(SEM),X-ray diffracto-metry(XRD) and X-ray photoelectron spectroscopy(XPS).The catalytic activities results showed that addition of Cu and Ce...展开更多
The corrosion behavior of TP304H steel with combined treatment of shot blasting and electrophoresis deposited RE coating in l%SO2+14%O2+85%Ar mixture gaseous has been studied at 923K for 150 hours. The results show th...The corrosion behavior of TP304H steel with combined treatment of shot blasting and electrophoresis deposited RE coating in l%SO2+14%O2+85%Ar mixture gaseous has been studied at 923K for 150 hours. The results show that both RE coating and shot blasting can improve the corrosion resistance of TP304H steel, and combined treatment has the best effect. Combined treatment reduces 50% mass gain, enhances the continuous and compactness of scale and changes the scale phase forms from FeaOs/Fe^S/Ni^/S to Cr2O3/FeCr2S4/Ni3_xS2. The synergistic effects of combined treatment on corrosion resistance and the effect of shot blasting on corrosion kinetics are discussed. Shot blasting increases the outward diffusion and surface concentration of Cr, Ce coating promotes the selective oxidation of Cr.展开更多
基金the Natural Science Foundation of Yunnan Province (2001E0011Q)the Science Foundation of The Education Department of Yunnan Province (0142111 and 07Z11402)
文摘For the goal of sulfur recovery, most methods are aimed at the tail gas with high-concentration H2S, but few effective methods are used for low-concentration H2S. In this work, Low-concentration H2S could be purified well by liquid phase catalytic oxidation (LCO), and the sulfur resource could also be recovered. The absorption solution was prepared by FeCl3 and sulfosalicylic acid. Under the experimental conditions, the conversion of H2S to S could be maintained above 94% at 60 ℃. In order to enhance the economical efficiency of LCO method, the absorption solution was modified by doping Ce, and a series of experiments were designed to investigate its performance. The results showed that the conversion of H2S had no obvious improvement, but above 98% conversion could be gained at 60 ℃, and the H2S conversion rate was enhanced. The optimum addition quality of Ce(NO3)3 was 0.08 g to 50 ml Fe3+ solution.
基金supported by the National Natural Science Foundation of China (50908110)Research Fund for the Postdoctoral Program of China (20090451431)+1 种基金National High Technology Research and Development Program of China (2008AA062602)Education Department Scientific Research Foundation of Yunnan Province (07C11400)
文摘Fe/Cu/Ce modified coal-based activated carbon(AC) was prepared by the sol-gel method,and the effect of Fe/Cu/Ce on catalytic properties of Fe/AC,Fe-Cu/AC and Fe-Cu-Ce/AC was investigated in the hydrolysis of carbonyl sulfide(COS) at 50 °C.Their surface properties were evaluated by means of nitrogen adsorption and were characterized by using scanning electron microscopy(SEM),X-ray diffracto-metry(XRD) and X-ray photoelectron spectroscopy(XPS).The catalytic activities results showed that addition of Cu and Ce...
文摘The corrosion behavior of TP304H steel with combined treatment of shot blasting and electrophoresis deposited RE coating in l%SO2+14%O2+85%Ar mixture gaseous has been studied at 923K for 150 hours. The results show that both RE coating and shot blasting can improve the corrosion resistance of TP304H steel, and combined treatment has the best effect. Combined treatment reduces 50% mass gain, enhances the continuous and compactness of scale and changes the scale phase forms from FeaOs/Fe^S/Ni^/S to Cr2O3/FeCr2S4/Ni3_xS2. The synergistic effects of combined treatment on corrosion resistance and the effect of shot blasting on corrosion kinetics are discussed. Shot blasting increases the outward diffusion and surface concentration of Cr, Ce coating promotes the selective oxidation of Cr.
