Rare-earth element geochemistry reveals the provenance of sediments on the southwestern margin of the Challenger Deep

The hadal zone represents one of the last great frontiers in modern marine science,and deciphering the provenance of sediment that is supplied to these trench settings remains a largely unanswered question.Here,we examine the mineralogical and geochemical composition of a sediment core(core CD-1)that was recovered from the southwestern margin of the Challenger Deep within the Mariana Trench.Major element abundances and rare-earth element patterns from these sediments require inputs from both terrigenous dust and locally sourced volcanic debris.We exploit a two-endmember mixing model to demonstrate that locally sourced volcanic material dominates the sediment supply to the Challenger Deep(averaging^72%).The remainder,however,is supplied by aeolian dust(averaging^28%),which is consistent with adjacent studies that utilized Sr-Nd isotopic data.Building on a growing database,we strengthen our understanding of Asian aeolian dust input into the northwestern Pacific,which ultimately improves our appreciation of sedimentation in,and around,the hadal zone.

Geochemical characteristics and their significances of rare-earth elements in deep-water well core at the Lingnan Low Uplift Area of the Qiongdongnan Basin

A geochemical analysis of rare-earth elements （REEs） in 97 samples collected from the core of deep-water Well LS-A located at the Lingnan Low Uplift Area of the Qiongdongnan Basin is conducted, with the pur-pose of revealing the changes of sedimentary source and environment in the study region since Oligocene and evaluating the response of geochemical characteristics of REEs to the tectonic evolution. In the core samples, both∑REE and∑LREE （LREE is short for light-group REEs） fluctuate in a relatively wide range, while∑HREE （HREE is short for heavy-group REEs） maintains a relatively stable level. With the stratigraphic chronology becoming newer, both∑REE and∑LREE show a gradually rising trend overall. The∑REE of the core is relatively high from the bottom of Yacheng Formation （at a well depth of 4 207 m） to the top of Ledong Formation, and the REEs show partitioning characteristics of the enrichment of LREE, the stable content of HREE, and the negative anomaly of Eu to varying degrees. Overall the geochemical characteristics of REEs are relatively approximate to those of China＇s neritic sediments and loess, with significant ＂continental ori-entation＂. The∑REE of the core is relatively low in the lower part of Yacheng Formation （at a well depth of 4 207-4 330 m）, as shown by the REEs partitioning characteristics of the depletion of LREE, the relative enrich-ment of HREE, and the positive anomaly of Eu; the geochemical characteristics of REEs are approximate to those of oceanic crust and basalt overall, indicating that the provenance is primarily composed of volcanic eruption matters. As shown by the analyses based on sequence stratigraphy and mineralogy, the provenance in study region in the early Oligocene mainly resulted from the volcanic materials of the peripheral uplift ar-eas; the continental margin materials from the north contributed only insignificantly; the provenance devel-oped to a certain extent in the late Oligocene. Since the Miocene, the provenance has ceaselessly expanded from proximal to distal realm, embodying a characteristic of multi-source sedimentation. In the core strata with 31.5, 28.4, 25.5, 23, and 16 Ma from today, the geochemical parameters of REEs and Th/Sc ratio have significant saltation, embodying the tectonic movement events in the evolution of the Qiongdongnan Basin. In the tectonic evolution history of the South China Sea, the South China Sea Movement （34-25 Ma BP, early expansion of the South China Sea）, Baiyun Movement （23 Ma BP）, late expansion movement （23.5-16.5 Ma BP）, expansion-settlement transition, and other important events are all clearly recorded by the geochemi-cal characteristics of REEs in the core.

Rare-earth and trace elements and hydrogen and oxygen isotopic compositions of Cretaceous kaolinitic sediments from the Lower Benue Trough, Nigeria: provenance and paleoclimatic significance

This study evaluated the Cretaceous(Campanian–Maastrichtian) kaolinitic sediments of the Ajali/Mamu and Enugu/Nkporo Formations from the Lower Benue Trough of Nigeria. A combined method of inductively coupled plasma–mass spectrometry and isotope ratio mass spectrometry was used to investigate trace and rareearth element geochemistry and hydrogen and oxygen isotopic compositions. These data were then used to infer the sediments' provenance and paleoclimatic conditions during their deposition. The sediments contained low concentrations of most trace elements, with the exceptions of Zr(651–1352 ppm), Ba(56–157 ppm), V(38–90 ppm),and Sr(15.1–59.6 ppm). Average values of Co and Ni were1.5 and 0.7 ppm, respectively. Trace and rare earth element values were lower than corresponding values for upper continental crust and Post-Archean Australian Shale, with the exception of Zr. The samples showed only slight light rare-earth enrichment and nearly flat heavy rare-earth depletion patterns, with negative Eu and Tm anomalies,typical of felsic sources. Geochemical parameters such as La/Sc, Th/Sc, and Th/Co ratios support that the kaolinitic sediments were derived from a felsic rock source, likely deposited in an oxic environment.^(18 )O values ranged from+ 15.4 to + 21.2% for the investigated samples, consistent with a residual material derived from chemicalweathering of felsic rock and redeposited in a sedimentary basin(typical values of + 19 to + 21.2%). While in the basin, the sediments experienced extended interactions with meteoric water enriched in d D and d16 O. However,the variation in d D and d16 O values for the investigated samples is attributed to the high temperature of formation(54–91 °C). The d D and d^(18 )O values suggest that the sediments, although obtained from different localities within the Lower Benue Trough, formed under similar hot,tropical climatic conditions.

Mechanism of interaction relation between the rare-earth element Ce and impurity elements Pb and Bi in Ag-based filler metal

The mechanism of interaction relation between the rare-earth element Ce and elements Pb and Bi in Ag-based filler metal has been studied. The results show that the compounds CePb and CeBi with high melting point can be easily produced between these three elements in the filler metal, which greatly limited the formation of the isolated phase Pb or Bi and also eliminated the bad effect of impurity elements Pb and Bi on the spreading property of Ag-based filler metal. The metallurgical and quantum-mechanical bond formation analysis show that a strong chemical affinity was existed between the rare-earth element Ce and impurity elements Pb and Bi, which was proved by the XRD analysis results.

Effects of rare-earth elements on the glass-forming ability and mechanical properties of Cu_(46)Zr_(47-x)Al_7M_x(M = Ce,Pr,Tb,and Gd) bulk metallic glasses

Cu46Zr47-xA17Mx （M = Ce, Pr, Tb, and Gd） bulk metallic glassy （BMG） alloys were prepared by copper-mold vacuum suction casting. The effects of rare-earth elements on the glass-forming ability （GFA）, thermal stability, and mechanical properties of Cu46Zr47-xA17Mx were investigated. The GFA of Cu46Zr47-xA17Mx （M = Ce, Pr） alloys is dependent on the content of Ce and Pr, and the optimal content is 4 at.%. Cu46Zr47-xA17Thx（X = 2, 4, and 5） amorphous alloys with a diameter of 5 mm can be prepared. The GFA of Cu46Zr47-xA17Gdx（x = 2, 4, and 5） increases with increasing Gd. Tx and Tp of all decrease. Tg is dependent on the rare-earth element and its content. ATx for most of these alloys decreases except the Cu46Zra2Al7Gd5 alloy. The activation energies △Eg, △Ex, and △Ep for the Cu46Zr42A17Gd5 BMG alloy with Kissinger equations are 340.7, 211.3, and 211.3 kJ/mol, respectively. These values with Ozawa equations are 334.8, 210.3, and 210.3 kJ/mol, respec- tively. The Cu46Zr45Al7Tb2 alloy presents the highest microhardness, Hv 590, while the Cu46Zr43A17Pr4 alloy presents the least, Hv 479. The compressive strength （at.f.） of the Cu46Zra3A17Gd4 BMG alloy is higher than that of the Cu46Zr43Al7Tb4 BMG alloy.

Synergistic Effect of Core/Shell‑Structured Composite Fibers:Efficient Recovery of Rare‑Earth Elements from Spent NdFeB Permanent Magnets

NdFeB magnets are third-generation permanent magnets that are employed as indispensable components in various industries.Notably,rare-earth elements(REEs)such as Dy and Nd must be efficiently recovered from end-of-life magnets to enable resource circulation and reinforce unstable supply chains.To that end,this paper reports synergistically performing core/shell-structured composite fibers(CSCFs)containing sodium polyacrylate and nanoporous zeolitic imidazolate framework-8(NPZIF-8)nanocrystals as a readily recoverable adsorbent with an exceptional REE-adsorbing ability.The CSCF core forms an NPZIF-8 nanocrystal shell on the fiber surface as well as draws REEs using its dense sodium carboxylate groups into the NPZIF-8 nanocrystal lattice with high specific surface area.The CSCFs exhibit significantly higher maximum adsorption capacities(468.60 and 435.13 mg·g-1)and kinetic rate constants(2.02 and 1.92 min-1)for the Nd3+and Dy3+REEs than those of previously reported REE adsorbents.Additionally,the simple application of the CSCFs to an adsorption reactor considerably mitigates the adsorbent-shape-induced pressure drop,thereby directly influencing the energy efficiency of the recovery.Moreover,the high REE-recovery ability,tractability,and recyclability of the CSCFs offers a pragmatic pathway to achieving cost-effective REE recovery.Overall,this study provides new insights into designing synergistically performing core/shell architectures for feasible REE recovery.

INFLUENCE OF RARE-EARTH ELEMENTS ON THERMAL STABILITY OF PdSi_(16.5)GLASS

The influence of rare-earth elements,La,Ce,Pr,Nd,Sm,Eu,Gd,Dy,Ho,Er and Yb on the thermal stability of PdSi_(16.5) glass was studied systematically by means of DSC.All rare-earth elements,especially heavy ones,increase obviously the thermal stability parameters,including T_θ(T_g ,T_x ,T_g),T_(rg) and ΔE etc.The crystallization temperatures T_(p1) and T_(p2) increase linearly with the lanthanide constriction increasing,but Eu shows an anomalous influence:Pd-Si-Eu metallic glass possesses the highest thermal stability and the lowest concentration limit of glass forming among Pd-Si-R glasses.

Influence of Rare-Earth Elements on ElectricalProperties of Pd

The influence of RE (RE = La, Ce. Pr. Nd, Sm, Eu, Gd. Tb. Dy, Er, Yb) additives with dilute concentrations on the electrical properties of Pd has been studied. All RE elements increase the specific resistivity (ρ) and decrease the resistance temperature coefficient (α) of Pd. and (ρ.α) Pd-RE ls equal to (ρ· α)Pd.The RE elements before Gd reduce the thermo-emf of Pd on Cu. other heavy RE enhance the thermo-emf.The experimental data of normalized Pd-0.1 at.-%RE alloys indicate that the effect of light RE additives on the specific resistivity of Pd is larger than that of heavy RE and Ce. Eu and Yb show anomalous strong effect. The valence and atomic size are main factors influencing the electrical properties.

Effect of trace rare earth element Er on high pure Al

The influence of trace Er addition on high pure aluminum was studied by mechanical properties measurement,hardness measurement, optical microscope,transmission electron microscope and energy spectrum analysis. The results show that minor Er in the studied alloy exists in the form of Al 3Er,only a few of Er in α Al based solid solution .Primary Al 3Er particles formed during solidification were often found at the center of aluminum grains and acted as heterogeneous nucleus, also increased the rate of nucleation, therefore the grain are remarkably refined. Trace Er addition to high pure aluminum is able to increase the mechanical properties of high pure Al, which is caused by fine grain strengthening, substructure strengthening and precipitation strengthening. The recrystallization temperature of Er doped aluminum increases above 50 ℃, which is caused by the pinning effect of highly dispersed fine Al 3Er precipitates on dislocations and sub grain boundaries.

Recent developments and applications on high-performance cast magnesium rare-earth alloys

During the past decades,with the increasing demands in lightweight structural materials,Mg alloys with low density and high performance have been extensively investigated and partly applied in some industries.Especially when rare earth(RE)elements are added as major alloying elements to Mg alloys,the alloy strength and creep resistance are greatly improved,which have promoted several series of Mg-RE alloys.This paper reviews the progress and developments of high-performance Mg-RE alloys in recent years with emphasis on cast alloys.The main contents include the alloy design,melt purification,grain refinement,castability,novel liquid casting and semisolid forming approaches,and the industrial applications or trials made of Mg-RE alloys.The review will provide insights for future developments of new alloys,techniques and applications of Mg alloys.

EFFECT OF RARE EARTH ELEMENT Er ON STRENGTHENING OF INTERFACE OF Ti（C，N） BASED CERMETS

ＥＦＦＥＣＴＯＦＲＡＲＥＥＡＲＴＨＥＬＥＭＥＮＴＥｒＯＮＳＴＲＥＮＧＴＨＥＮＩＮＧＯＦＩＮＴＥＲＦＡＣＥＯＦＴｉ（Ｃ，Ｎ）ＢＡＳＥＤＣＥＲＭＥＴＳ￥ＬｉｕＮｉｎｇ（ＤｅｐａｒｔｍｅｎｔｏｆＭａｔｅｒｉａｌｓＳｃｉｅｎｃｅａｎｄＥｎｇｉｎｅｅｒｉｎｇ，...

Corrosion rate determination of rare-earth Mg alloys in a Na_(2)SO_(4)solution by electrochemical measurements and inductive coupled plasma-optical emission spectroscopy

The corrosion resistance of three Mg alloys containing rare-earth elements(WE43,EV31 and ZE41)was studied and compared to that of two Mg-Al alloys(AZ31 and AZ91)and of pure Mg(99.95 wt.%).Current-voltage curves and electrochemical impedance measurements were performed with rotating disk electrodes in an aerated 0.1 M Na_(2)SO_(4)solution.For all the alloys,it was confirmed that the intermetallic particles acted as local cathodes and that more protective films were formed on the alloys surface by comparison with the pure Mg.Corrosion rates were determined from inductive coupled plasma-optical emission spectroscopy measurements and from the electrochemical measurements.Higher corrosion rates were observed for the rare-earth Mg alloys compared to the AZ series alloys.These data allowed the corrosion mechanisms to be discussed.

Research of Optical Performance On Rare-Earth Optical Fiber

The rare-earth optical fiber is made of organic material and inorganic rare earth material.It can be used to absorb and transfer solar energy.When sunlight irradiates, it may absorb and transfer solar energy automatically; while at night or without sunlight it may give out light and play role of decoration.By utilizing high transmissivity of organic material and heat-resisting performance of inorganic material, we know the reorganization of material performance under the melting condition, and make empty core bear the high temperature of 150 ~200 ℃.When the light spreads in light guide, some light energy travels along the direction of light guide, and is introduced in the room directly.Another part of light energy is absorbed and stored by light guide, and can release light again after 8 ~ 12 h.

Trace and rare earth element geochemistry of the black and grey shales of the Calabar Flank, Southeastern Nigeria: constraints on the depositional environment and the degree of metal enrichment

This study focuses on the trace and rare earth elements(REE)geochemistry of the Nkporo and Ekenkpon Shales of the Calabar Flank.The main aim is to infer their depositional environment and the degree of their metal enrichment.The shale samples were analyzed using inductively coupled plasma mass spectrometry.The results indicated that the mean concentrations of K,Na,and Fe in Nkporo and Ekenkpon Shales are 1.45,0.4,and 4.17 wt%,and 1.11,0.44,and 5.42 wt%;respectively.The Nkporo Shale is enriched with the following trace elements;P>Mn>Sr>Ba>Zn>Ce>Rb>Zr>V>Cr>Ni and depleted in the following trace elements;Ta>Ge>Sb>Bi>Cd>Ag>Te>In>Hg.While the Ekenkpon Shale is enriched with the following trace elements;P>Mn>Ba>Sr>V>Ce>Zr>Rb>Cr>Zn>Ni and depleted in;Sb>Ge>Bi>Ag>Ce>Te>In>Hg.The concentration of redox-sensitive elements such as V,Ni,Mo,U,Cu,Cr,Re,Cd,Sb,Ti,Mn,and their ratio V/Mo and U/Mo in the black and grey shale samples show different patterns.The REE obtained from the Nkporo and Ekenkpon Shales were PAAS normalized.The Nkporo Shale showed a slightly flat light rare-earth element(LREE),middle rare-earth element(MREE),and heavy rare earth element(HREE)pattern enrichment.Ce/Ce*ranges from 0.95 to 1.09 in Nkporo Shale and 0.67 to 1.40 in Ekenkpon Shale.The Ekenkpon Shale showed a slight LREE,MREE enrichment,and depleted HREE patterns.The Mn contents and U/Mo ratio in Nkporo and Ekenkpon Shales suggests a poor oxygen transitional environment.The V/Mo and V/(V+Ni)ratios indicated that the Nkporo shales were deposited in an anoxic to suboxic conditions and Ekenkpon shales were also deposited under an anoxic to suboxic conditions.The V/Ni ratio indicated that the organic matter in the Nkporo shale is terrigenous while that of the Ekenkpon shales are both terrigenous and marine in origin.

Applied Mineralogy Studies of Rare-Earth Ores

New attention has been given to the resources of rare earth minerals over the last years. The natural shortage of these elements in the Earth’s crust and trade restrictions recently imposed by China, motivated the Brazilian Government to encourage new projects by inserting the exploitation of rare earths in the National Mining Plan, which deals with industry strategic issues in the country, helping to reduce current importation. The incentives can be in the choice of future targets for mineral exploration and for the development of laboratory studies and pilot scale processing tests.

Mechanochemical-Assisted Leaching of Lamp Phosphors： A Green Engineering Approach for Rare-Earth Recovery

Rare-earth elements （REEs） are essential metals for the design and development of sustainable energy applications, Recycling these elements from waste streams enriched in them is crucial for securing an independent future supply for sustainable applications, This study compares the mechanisms of mechan- ical activation prior to a hydrometallurgical acid-leaching process and a solvometallurgical mechanochemical leaching process for the recovery of REEs from green lamp phosphor, LaPO4：Ce3＋, Th3＋, After 60 min of processing time, the REE leaching rates showed a significant enhancement of 60% after cycled mechanical activation, and 98% after the combined mechanochemical leaching process, High-resolution transmission electron microscopy （HR-TEM） imaging disclosed the cause for the improved REE leaching rates： The improved leaching and leaching patterns could he attributed to changes in the crystal morphology from monocrystalline to polycrystalline, Reduction of the crystallite size to the nanoscale in a polycrystalline material creates irregular packing of chemical units, resulting in an increase in defect-rich grain boundaries in the crystals, which enhances the leaching process, A solvometallurgical method was developed to combine the mechanical activation and leaching process into a single step, which is beneficial for operational cost, This results in an efficient and simple process that provides an alternative and greener recycling route for lamp phosphor waste,

基于稀土掺杂上转换纳米材料NaYF_(4):Yb,Er@TGA直接对金属离子进行定量分析的方法探究

目的:基于荧光猝灭或增强机制,构建稀土掺杂上转换纳米材料NaYF_(4):Yb,Er@TGA直接对金属离子进行定量分析的方法,实现对金属离子快速、准确、灵敏检测。方法:通过溶剂热法制备出性能优良的稀土掺杂上转换纳米材料NaYF_(4):Yb,Er@TGA,并对其进行表征;通过测量14种常见的金属离子对NaYF_(4):Yb,Er@TGA荧光强度的影响,筛选能够引起NaYF_(4):Yb,Er@TGA荧光强度增强或下降,且与金属离子浓度呈线性关系的金属离子类型,进而建立检测新方法。结果:金属离子Mg^(2+)、Fe^(3+)分别在浓度范围为0~7.00μg/mL、0~6.00μg/mL与NaYF_(4):Yb,Er@TGA的荧光强度呈现良好的线性关系,其标准曲线方程的线性系数分别为0.9924、0.9982,检出限分别为1.79μg/mL、1.30μg/mL,加标回收率分别为95.5%~98.8%、92.5%~97.8%,方法相对标准偏差分别为4.05%、8.18%。结论:该方法检测限低、准确度较高、精密度较好,有望用于实际样品中Mg^(2+)、Fe^(3+)定量分析。

Effect of Different N Sources on Contents of Rare Earth and Trace Elements in Sclerotia of Pleurotus Tuber Regium

Effect of different N resource on the contents of rare-earth elements, P, K and trace elements in the sclerotia of Pleurotus tuber regium was studied. The results show that the contents of rare-earth elements, P, K and trace elements in the sclerotia of Pleurotus tuber regium are different when treating with various N sources. Except Er and Tm, the contents of rare-earth elements of La, Ho, Dy, Tb and Yb are the highest by treating with ammonium sulfate. When concerning the contents of P, K and trace elements in the sclerotia in different N source treatments, the contents of Cu and Fe are the highest by using cow dung as N source, In and P are the highest by using ammonium sulfate, K, Cl and S are the highest when using urea as N source. The correlation analysis show that certain correlation exists among the contents of rare-earth elements, P, K and trace elements in the sclerotia of Pleurotus tuber regium. Furthermore, the correlation is different by using different N sources, among which the content of Dy is positively related with the contents of P and In, Yb is highly positively related with P content and La is negatively related with S content.

0.2%Er对Al-6.5%Cu合金组织及性能的影响

稀土微合金化是提升铝合金性能的重要手段之一,为了研究稀土元素Er对合金的具体作用,采用扫描电子显微镜(SEM)、差示扫描量热仪(DSC)、电子背散射衍射(EBSD)、透射电镜(TEM)和硬度等测试手段,研究了0.2%Er对Al-6.5%Cu合金性能的优化及其机理。结果显示,Er元素的引入降低了原有的晶粒择优取向现象,合金中织构的强度明显降低,有助于提高合金的塑性和韧性。同时Er元素促使晶粒细化,晶粒尺寸由60.10μm降低至23.8μm。在TEM测试中观察到棱柱状的Al 3Er粒子对位错具有阻碍作用,也观察到合金基体中出现均匀分布的细小弥散相,它可以促进时效过程中强化相的析出。添加Er元素后,不同状态的合金硬度也都有所提高。

微量稀土元素Er对高纯铝再结晶行为的影响

采用硬度测试、金相显微观察和透射电镜分析等方法,研究了微量稀土Er对高纯铝再结晶行为的影响。结果表明:弥散分布的细小Al3Er质点对位错和亚晶界具有钉扎作用,可以有效抑制再结晶,将高纯铝的再结晶温度提高50℃左右,同时还能显著细化再结晶晶粒;再结晶形核机制是亚晶聚合和亚晶长大双重机制。