Study on Hydrogen Storage Properties,Anti-Oxide Ability and Rate Limiting Step of ZrCr-Based Alloy after Introducing Cobalt as Additive

In this work,the microstructure,hydrogen storage properties,anti-oxide ability and rate limiting step of Zr(Cr_(1−x)Co_(x))_(2)(x=0,0.2,0.4 and 0.6)alloys have been investigated.After studying the crystal structure,we found that all alloy samples could show C14-type phase but the alloy sample x=0 could also show a small amount of Cr phase.Rietveld fitting showed that lattice parameter and unit cell volume of C14-type phase decreased with increasing x.After further research,it was clear that the first hydrogen absorption capacity decreased with increasing x.But introducing more Co content had a positive influence on the effective hydrogen storage capacity and cyclic hydrogen absorption and desorption properties of the alloy sample.We also found that adding Co to ZrCr_(2)alloy could improve its anti-oxide ability.In addition to this,the rate limiting step model was also studied.

Passive Q-Switching of a Yb:LuVO_4 Laser with Cr^(4+):YAG:Approaching the Intrinsic Upper Limit of Repetition Rate

We demonstrate a diode pumped Yb：LuVO4 laser that can be passively Q-switched by a Cr^（4＋）：YAG saturable absorber having an initial transmission as high as 99.3%.A maximum pulsed output power of 2.35 W is generated at a repetition rate of 285.7 kHz,approaching or very near the intrinsic upper limit imposed by the recovery time of the Cr^（4＋）：YAG saturable absorber,and the resulting pulse energy,duration and peak power are,respectively,8.2μJ,39.2ns and 0.209kW.

Effects of soil nitrate:ammonium ratio on plant carbon:nitrogen ratio and growth rate of Artemisia sphaerocephala seedlings

Can soil nitrate： ammonium ratios influence plant carbon： nitrogen ratios of the early succession plant？ Can plant carbon： nitrogen ratios limit the plant growth in early succession？ To address these two questions, we performed a two-factor （soil nitrate： ammonium ratio and plant density） randomized block design and a uniform-precision rotatable central composite design pot experiments to examine the relationships between soil nitrate： ammonium ratios, the carbon： nitrogen ratios and growth rate of Artemisia sphaerocephala seedlings. Under adequate nutrient status, both soil nitrate： ammonium ratios and plant density influenced the carbon： nitrogen ratios and growth rate of A. sphaerocephala seedlings. Under the lower soil nitrate： ammonium ratios, with the increase of soil nitrate： ammonium ratios, the growth rates of plant height and shoot biomass of A. sphaerocephala seedlings decreased significantly; with the increase of plant carbon： nitrogen ratios, the growth rates of shoot biomass of A. sphaerocephala seedlings decreased significantly. Soil nitrate： ammonium ratios affected the carbon： nitrogen ratios of A. sphaerocephala seedlings by plant nitrogen but not by plant carbon. Thus, soil nitrate： ammonium ratios influenced the carbon： nitrogen ratios of A. sphaerocephala seedlings, and hence influenced its growth rates. Our results suggest that under adequate nutrient environment, soil nitrate： ammonium ratios can be a limiting factor for the growth of the early succession plant.

Modified Cuckoo Search Algorithm to Solve Economic Power Dispatch Optimization Problems

A modified cuckoo search(CS) algorithm is proposed to solve economic dispatch(ED) problems that have nonconvex, non-continuous or non-linear solution spaces considering valve-point effects, prohibited operating zones, transmission losses and ramp rate limits. Comparing with the traditional cuckoo search algorithm, we propose a self-adaptive step size and some neighbor-study strategies to enhance search performance.Moreover, an improved lambda iteration strategy is used to generate new solutions. To show the superiority of the proposed algorithm over several classic algorithms, four systems with different benchmarks are tested. The results show its efficiency to solve economic dispatch problems, especially for large-scale systems.

Numerical simulation for determining three zones in the goaf at a fully-mechanized coal face

According to the theory of ventilation network, a model for a filtration flow field in goaf was built and simulation soft- ware for determining the three zones in goaf has been developed. This software uses no-gap-connection between Visual Basic (VB) and Excel to exchange data, uses Component Object Model (COM) component of MATLAB to plot charts of the three zones and to export the corresponding coordinates of the isolines. An example shows that this software is convenient and simple. By using it, the three zones can be easily determined. The software is convenient in studies and analyses of the three zones in goaf.

Application Research of Oil Development Costs in Reservoir Management

Based on oil development costs, the application research in the technical and economic limits calculation of oil development and the production optimal allocation to all the oilfields, was finished. At the same time, according to the regression of real development costs, a new method for oil well economic water cut and oil well economic rate are set up, the production optimal allocation is developed with satisfactory results.

Addressing Economic Dispatch Problem with Multiple Fuels Using Oscillatory Particle Swarm Optimization

Economic dispatch has a significant effect on optimal economical operation in the power systems in industrial revolution 4.0 in terms of considerable savings in revenue.Various non-linearity are added to make the fossil fuel-based power systems more practical.In order to achieve an accurate economical schedule,valve point loading effect,ramp rate constraints,and prohibited operating zones are being considered for realistic scenarios.In this paper,an improved,and modified version of conventional particle swarm optimization(PSO),called Oscillatory PSO(OPSO),is devised to provide a cheaper schedule with optimum cost.The conventional PSO is improved by deriving a mechanism enabling the particle towards the trajectories of oscillatory motion to acquire the entire search space.A set of differential equations is implemented to expose the condition for trajectory motion in oscillation.Using adaptive inertia weights,this OPSO method provides an optimized cost of generation as compared to the conventional particle swarm optimization and other new meta-heuristic approaches.

The Analysis and Modification of Opportunity Cost of Investment

We think we should use basic return rate of industry to measure the opportunity cost of capital and use the rule of Maximum NPV （Net Present Value） to modify the wrong solution in the book.

Capillary flow rate limitation in asymmetry open channel

Abstract This paper focuses on the stability of capillary forced flow. In space, open capillary channels are widely used as the liquid and gas separation devices to manage liquid positioning and transportation. Surface collapse happens when the flow rate exceeds the critical value, leading to a failure of propellant management. Knowledge of flow rate limitation is of great significance in design and optimization of propellant management devices （PMDs）. However, the capillary flow rate limitation in an asymmetry channel has not been studied yet in the literature. In this paper, by introducing an equivalent angle to convert the asymmetry corner to a symmetry one, the one-dimensional theoretical model is developed. The flow rate limitation can then be investigated as a function of the channel geometry as well as liquid property based on the model. Comparisons between the asymmetry and symmetry channels bring forth the characteristics of the two kinds of channels, and demonstrate good accordance between the new advanced model and the existing one in the literature. This theoretical model can provide valuable reference for PMD designers.

Flow rate limitation in open wedge channel under microgravity

A study of flow rate limitation in an open wedge channel is reported in this paper. Under microgravity condition, the flow is controlled by the convection and the viscosity in the channel as well as the curvature of the liquid free surface. A maximum flow rate is achieved when the curvature cannot balance the pressure difference leading to a collapse of the free surface. A 1-dimensional theoretical model is used to predict the critical flow rate and calculate the shape of the free surface. Computa- tional Fluid Dynamics tool is also used to simulate the phenomenon. Results show that the 1-dimensional model overestimates the critical flow rate because extra pressure loss is not included in the governing equation. Good agreement is found in 3-dim- ensional simulation results. Parametric study with different wedge angles and channel lengths show that the critical flow rate increases with increasing the cross section area; and decreases with increasing the channel length. The work in this paper can help understand the surface collapsing without gravity and for the design in propellant management devices in satellite tanks.