A rate-dependent constitutive model for saturated frozen soil considering local breakage mechanism

A rate-dependent constitutive model for saturated frozen soil is vital in frozen soil mechanics,especially when simultaneously describing the nonlinearity,dilatancy and strain-softening characteristics.The distribution of the non-uniform strain rate of saturated frozen soil at the meso-scale due to the local icecementation breakage is described by a newly binary-medium-based homogenization equation.Based on the field-equation-based approach of the meso-mechanics theory,the interaction expression of the strain rate at macro-and meso-scale is derived,which can give the strain rate concentration tensor at different crushed degrees.With the thermodynamics and empirical assumption,a breakage ratio in the rate-dependent form is determined.This overcomes the limitations of the existing binary-medium-based models that are difficult to simulate rate-dependent mechanical response.Based on these assumptions,a newly binary-medium-based rate-dependent model is proposed considering both the ice bond breakage and material composition characteristics of saturated frozen soil.The proposed constitutive model has been validated by the test results on frozen soils with different temperatures and strain rates.

Constitutive equations for high temperature flow stress prediction of 6063 Al alloy considering compensation of strain

In order to develop the appropriate constitutive equation which can precisely model high temperature flow stress of 6063 Al alloy, a series of isothermal hot compression tests were performed at temperatures from 573 to 773 K and strain rates from 0.5 to 50 s?1 on a Gleeble?1500 thermo-simulation machine. Zener–Hollomon parameter in an exponent-type equation was used to describe the combined effects of temperature and strain rate on hot deformation behaviour of 6063 Al alloy, whereas the influence of strain was incorporated in the developed constitutive equation by considering material constants (α,n,Q andA) to be 4th order polynomial functions of strain. The results show that the developed constitutive equation can accurately predict high temperature flow stress of 6063 Al alloy, which demonstrates that it can be suitable for simulating hot deformation processes such as extrusion and forging, and for properly designing the deformation parameters in engineering practice.

Constitutive equation and processing map for hot compressed as-cast Ti-43Al-4Nb-1.4W-0.6B alloy

High temperature compressive deformation behaviors of as-cast Ti-43Al-4Nb-1.4W-0.6B alloy was investigated at temperatures ranging from 1323 K to 1473 K, and strain rates from 0.001 s-1 to 1 s-1. The results indicated that the true stress-true strain curves show a dynamic flow softening behavior. The flow curves after the friction and the temperature compensations were employed to develop constitutive equations. The effects of temperature and the strain rate on the deformation behavior were represented by Zener-Holloman exponential equation. The influence of strain was incorporated in the constitutive analysis by considering the effect of the strain on material constants by a five-order polynomial. A revised model was proposed to describe the relationships among the flow stress, strain rate and temperature and the predicted flow stress curves were in good agreement with experimental results. Appropriate deformation processing parameters were suggested based on the processing map which was constructed from friction and temperature corrected flow curves, determined as 1343 K, 0.02 s-1 and were successfully applied in the canned forging of billets to simulate industrial work condition.

CONSTITUTIVE EQUATIONS OF METAL-CORE PIEZOELECTRIC FIBERS

Metal-core piezoelectric fibers （MPFs） are one of the new type piezoelectric devices. To investigate the piezoelectricity and the mechanical properties of the piezoelectric fibers, the constitutive equations are established. It can describe the response of piezoelectric fibers subject to an axial force and an external voltage. A cantilever bar subject to a tip axial force and an external voltage on the electrodes is considered. The internal energy density in thermodynamic equilibrium is obtained. The total internal energy is calculated by integrating over the entire volume of the bar. The generalized displacement of the tip axial force is the tip elongation δ, and the generalized displacement of the voltage is the electrical charge Q on the electrodes. In the established constitutive equations, the excitation （input） parameters are the axial force and the external voltage, the response （output） parameters are the tip elongation and the electric charge. And the response parameters are related to the excitation parameters by a 2× 2 piezoelectric matrix. Finally, two experiments using MPF as a sensor or an actuator are performed to verify the constitutive equations. And experimental results are compared with analytical ones.

Constitutive equations of 1060 pure aluminum based on modified double multiple nonlinear regression model

In order to study the work-ability and establish the optimum hot formation processing parameters for industrial 1060 pure aluminum, the compressive deformation behavior of pure aluminum was investigated at temperatures of 523?823 K and strain rates of 0.005?10 s?1 on a Gleeble?1500 thermo-simulation machine. The influence rule of processing parameters (strain, strain rate and temperature) on flow stress of pure aluminum was investigated. Nine analysis factors consisting of material parameters and according weights were optimized. Then, the constitutive equations of multilevel series rules, multilevel parallel rules and multilevel series &parallel rules were established. The correlation coefficients (R) are 0.992, 0.988 and 0.990, respectively, and the average absolute relative errors (AAREs) are 6.77%, 8.70% and 7.63%, respectively, which proves that the constitutive equations of multilevel series rules can predict the flow stress of pure aluminum with good correlation and precision.

A Novel Constitutive Equation for Viscoelastic-Thixotropic Fluids and its Application in the Characterization of Blood Hysteresis Loop

1 INTRODUCTIONIt is well known that viscoelasticity and thixotropy of fluids are often investigated by measuringhysteresis loops under transient conditions.For some fluids(such as blood),it has been provedthat,an“8”shaped hysteresis loop may be obtained if triangular steps of shear rate wereapplied on it(Fig.l).This kind of hysteresis loop is composed of a viscoelastic loop and athixotropic loop.The viscoelastic and thixotropic properties are unified in the formation ofthe hysteresis loop.How to describe the formation of this complex hysteresis loop and how

Deformation characteristics and strain-compensated constitutive equation for AA5083 aluminum alloy under hot compression

The hot deformation behavior of AA5083 aluminum alloy was studied using isothermal compression tests with a Gleeble 3500 thermal simulator at strain rate of 0.0110 s 1 and at temperature of 300500°C.The experimental results indicate that dynamic recrystallization(DRX)tends to occur at high strain rates and temperatures,and therefore the flow stress is decreased.To predict the flow behavior under different deformation conditions,a strain-compensated constitutive equation based on Arrhenius-type equation and Zener Hollomon parameters was proposed.The flow stresses obtained from the constitutive equation are consistent with the experimental results.The average absolute relative error is only 4.52%over the entire experimental range,indicating that the proposed constitutive equation exhibits high prediction precision for the hot deformation behavior of AA5083 aluminum alloy.

Simple physically-based constitutive equations for hot deformation of 2024 and 7075 aluminum alloys

The hot working behaviors of 2024 and 7075 aluminum alloys were studied through constitutive analysis based on a physically-based approach which accounts for the dependence of the elastic modulus and the self-diffusion coefficient of aluminum on temperature. It was demonstrated that the lattice self-diffusion activation energy of aluminum（142 k J/mol） can be used in the Zener-Hollomon parameter＇s formula as the deformation activation energy and the theoretical exponent of 5 can be set in the modified hyperbolic sine law to describe the peak flow stresses. By consideration of physically-based material＇s parameters, it was possible to conduct a comparative study on the hot flow stress of 2024 and 7075 aluminum alloys. It was concluded that the used approach in the current work can be considered as a versatile tool in future comparative hot working studies, especially in studies dedicated to alloy development.

CONSTITUTIVE EQUATION OF CO-ROTATIONAL DERIVATIVE TYPE FOR ANISOTROPIC-VISCOELASTIC FLUID

A constitutive equation theory of Oldroyd fluid B type,i.e.the co-rotational derivative type,is developed for the anisotropic-viscoelastic fluid of liquid crystalline(LC)polymer.Analyzing the influence of the orientational motion on the material behavior and neglecting the influence,the constitutive equation is applied to a simple case for the hydrodynamic motion when the orientational contribution is neglected in it and the anisotropic relaxation,retardation times and anisotropic viscosi- ties are introduced to describe the macroscopic behavior of the anisotropic LC polymer fluid.Using the equation for the shear flow of LC polymer fluid,the analytical expressions of the apparent viscosity and the normal stress differences are given which are in a good agreement with the experimental results of Baek et al.For the fiber spinning flow of the fluid,the analytical expression of the extensional viscosity is given.

Cyclic constitutive equations of rock with coupled damage induced by compaction and cracking

In this paper,the cyclic constitutive equations were proposed to describe the constitutive behavior of cyclic loading and unloading.Firstly,a coupled damage variable was derived,which contains two parts,i.e.,the compaction-induced damage and the cracking-induced damage.The compaction-induced damage variable was derived from a nonlinear stress–strain relation of the initial compaction stage,and the cracking-induced damage variable was established based on the statistical damage theory.Secondly,based on the total damage variable,a damage constitutive equation was proposed to describe the constitutive relation of rock under the monotonic uniaxial compression conditions,whereafter,the application of this model is extended to cyclic loading and unloading conditions.To validate the proposed monotonic and cyclic constitutive equations,a series of mechanical tests for marble specimens were carried out,which contained the monotonic uniaxial compression(MUC)experiment,cyclic uniaxial compression experiments under the variable amplitude(CUC-VA)and constant amplitude(CUC-CA)conditions.The results show that the proposed total damage variable comprehensively reflects the damage evolution characteristic,i.e.,the damage variable firstly decreases,then increases no matter under the conditions of MUC,CUC-VA or CUC-CA.Then a reasonable consistency is observed between the experimental and theoretical curves.The proposed cyclic constitutive equations can simulate the whole cyclic loading and unloading behaviors,such as the initial compaction,the strain hardening and the strain softening.Furthermore,the shapes of the theoretical curves are controlled by the modified coefficient,compaction sensitivity coefficient and two Weibull distributed parameters.

A set of microstructure-based constitutive equations in hot forming of a titanium alloy

A physical model of microstructure evolution including dislocation density rate and grain growth rate was established based on the deformation mechanism for the hot forming of a class of two-phase titanium alloys. Further, a set of mechanism-based constitutive equations were proposed, in which the microstructure variables such as grain size and dislocation density were taken as internal state variables for characterizing the current material state. In the set of constitutive equations, the contributions of different mechanisms and individual phase to the deformation behavior were analyzed. The present equations have been applied to describe a correlation of the flow stress with the microstructure evolution of the TC6 alloy in hot forming.

Constitutive equation and hot deformation characteristic of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si alloy with equiaxed microstructure

The hot deformation behavior of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si alloy with equiaxed microstructure was characterized in the temperature range of 900～1060 ℃ and strain rate range of 10-3～10 s-1.The experimental results indicate that the plastic deformation behavior of the titanium alloys is rather sensitive to temperature and strain rate.In the α+β phase temperature region,all of the stress-strain curves exhibit different degrees of the flow softening after a peak stress.In the β phase temperature region,the titanium alloy shows a stress softening at high strain rates and a steady flow stress at low strain rates.On the basis of the peak stress data,the constitutive equations were constructed in the α+β phase temperature region and β phase temperature region,respectively.Activation energy parameters were calculated to be 344.923 kJ·mol-1 in the β phase temperature region and 628.3 kJ·mol-1 in the α+β phase temperature region.Microstructure of the compressed specimens in water-quenched conditions was found to be quite dependent on the conditions of deformation.

GENERAL EXPRESSIONS OF CONSTITUTIVE EQUATIONS FOR ISOTROPIC ELASTIC DAMAGED MATERIALS

The general expressions of constitutive equations for isotropic elastic damaged materials were derived directly from the basic law of irreversible thermodynamics. The limitations of the classical damage constitutive equation based on the well-known strain equivalence hypothesis were overcome. The relationships between the two elastic isotropic damage models (i.e. single and double scalar damage models) were revealed. When a single scalar damage variable defined according to the microscopic geometry of a damaged material is used to describle the isotropic damage state, the constitutive equations contain two 'damage effect functions', which describe the different influences of damage on the two independent elastic, constants. The classical damage constitutive equation based on the strain equivalence hypothesis is only the first-order approximation of the general expression. It may be unduly simplified and may fail to describe satisfactorily the damage phenomena of practical materials.

New constitutive equation utilizing grain size for modeling of hot deformation behavior of AA1070 aluminum

A new phenomenological and empirically-based constitutive model was proposed to modify the term in the original Johnson−Cook constitutive model.The new model can be used to describe and predict the flow stress of AA1070 aluminum with different initial grain sizes in the hot working process.This developed model considers thermal softening,strain-rate hardening,strain hardening,initial grain size,and interactions with each other and can correctly model the behavior of AA1070 at elevated temperature with different strains,strain rates,and initial grain sizes.The hot flow behavior of AA1070 was investigated through compression tests over wide ranges of temperature from 623 to 773 K,strain rate from 0.005 to 0.5 s−1 and initial grain size from 50 to 450μm.Results show that the initial grain size has a significant effect on the flow behavior of AA1070.Then,correlation coefficient(R),average absolute relative error(AARE),and relative error were examined for comparative predictability of the model.Results show that flow stresses for different initial grain sizes calculated by the new proposed model perfectly correlate with experimental ones,with a mean relative error of 1.19%,which confirms that the new modified Johnson−Cook relation can give a precise estimation of the hot flow stress of AA1070 aluminum by considering the initial grain size.

A phenomenological constitutive equation for Rene 95 PM alloy and its application to isothermal forging process of turbine disk

The flow behavior of Rene 95 PM alloy was studied from 1050 to 1150 deg Cwith strain rate of 1 X 10^(-3), 1 X 10^(-2), 1 X 10^(-1) and 1 s^(-1). At a given temperature andstrain rate, flow curves exhibit a peak followed by flow softening up to a steady state. Moreover,at constant strain, flow stress increases with increasing strain rate and decreasing temperature. Anequation relating hyperbolic sine of flow stress to hot working parameters, such as strain, strainrate and temperature, was established by using multiple nonlinear regression method. A very goodagreement was found between predicted and experimental flow stress in all the strain rangeinvestigated. Application of the constitutive equation in predicting forming loads and flow behaviorand temperature distribution in both upper and lower dies in an isothermal forging process ofturbine disk of large dimension (about 630 mm) by means of a finite element code was systematicallyanalyzed.

CONSTITUTIVE EQUATION OF A NEW AVIATION LUBRICATING OIL

The traction of a new aviation lubricating oil was measured on a self-made test rig. The calculating formulae of the rheological parameters of the oil such as Erying stress, limiting shear stress and shear elastic modulus were obtained under the condition of the high shear strain rate in elastohydrodynamic lubrication（EHL）. The constitutive equation of this oil was determined and verified by test. The results of experiments show that the behavior of the new aviation lubricating oil behaves as visco-elastic fluid and the theoretical value agrees fairly well with the measured data, which implies that the constitutive equation of this oil is correct and feasible.

Constitutive equation and processing map of equiatomic NiTi shape memory alloy under hot plastic deformation

In order to describe the deformation behavior and the hot workability of equiatomic NiTi shape memory alloy (SMA) during hot deformation, Arrhenius-type constitutive equation and hot processing map of the alloy were developed by hot compression tests at temperatures ranging from 500 to 1100 °C and strain rates ranging from 0.0005 to 0.5 s?1. The results show that the instability region of the hot processing map increases with the increase of deformation extent. The instability occurs in the low and high temperature regions. The instability region presents the adiabatic shear bands at low temperatures, but it exhibits the abnormal growth of the grains at high temperatures. Consequently, it is necessary to avoid processing the equiatomic NiTi SMA in these regions. It is preferable to process the NiTi SMA at the temperatures ranging from 750 to 900 °C.

THE CONSTITUTIVE EQUATION RESEMBLANCE OF ELASTIC-PLASTIC MULTIPHASE SOLID

Based on composite materials, the equivalent elastic-plastic constitutive equations of multiphase solid are researched. According to the suggested definition of. constitutive equivalence it is demonstrated that the multiphase solid, composed of several kinds of homogeneous elastic-plastic media that conform to the generalized normality rule, has the same type of constitutive equations as its constituents have that also conform to the generalized normality rule.

Constitutive equations and finite element implementation of strain localization in sand deformation

A recently proposed model coupling with the solid-fluid of the saturated sand was utilized to study the deformation band. Based on the critical state plasticity model by Borja and Andrade, the hydraulic conductivity tensor was naturally treated as a function of the spatial discretization matrix about the displacement and the stress field, allowing a more realistic representation of the physical phenomenon. The fully Lagrangian form of the Darcy law was resolved by Piola algorithm, and then the flow law was gained, leading to the implementation of a modified model of the saturated sand. Then the criterion for the onset of localization was derived and utilized to detect instability. The constitutive model was implemented in a finite element program coded by FORTRAN, which was used to predict the formation and development of shear bands in plane strain compression of saturated sand. At last, the formation mechanism of the shear band was discussed. It is shown that the model works well, and the simulation sample bifurcates at 1.18% axial strain, which is in a good qualitative agreement with the experiment. The pore pressure greatly affects the onset and development of the deformation band, and it obviously increases around the localization-prone regions with the direction toward the outer side of the normal of the shear band, while the pore stress flows nearly horizontally and is distributed equally far away the shear band region.

Research on constitutive equation of DIWA353 steel used in hemisphere head of power station nearby recrystallization temperature

To simulate the DIWA353 steel used in boiler nearby recrystallization temperature accurately by using finite element,the high temperature constitutive model of this material must be researched firstly.Thermal simulation experimental machine is used to do the high temperature hot compression experiments for the DIWA353 steel used in boiler under different strain rates and temperatures nearby recrystallization temperature.Multi-bank data of true stress-true strain is gotten,and the hot deformation activation energy of DIWA353 is obtained,and the constitutive equation of steady-state flow stress under the circumstance of high temperature is constructed.The results show that DIWA353 steel is positive strain rate sensitized material when it is at temperature of 850-1050 ℃,and the steady-state flow stress decreases with the increase of deformation temperature,but increases with the increase of strain rate.