Background: It has been postulated that elliptical cutaneous excisions must possess a length-to-width ratio of 3 to 4 and a vertex angle of 30o or less in order to be closed primarily without creating a “dog ear”. T...Background: It has been postulated that elliptical cutaneous excisions must possess a length-to-width ratio of 3 to 4 and a vertex angle of 30o or less in order to be closed primarily without creating a “dog ear”. These dimensions became axiomatic in cutaneous surgery and have been taught in the apprenticeship model for years. The present article examines the validity of that paradigm. Methods: We collected data from two sources: ellipses described in the literature (57 cases);and elliptical excisions performed at the authors’ outpatient clinic (83 cases). The surgical ellipse lengths, widths, and vertex angles were analyzed, and the data were compared to a mathematical formula used to generate a fusiform ellipse. Results: The length-to-width ratio of 3 - 4 was found to be inconsistent with the recommended vertex angle of 30o. In fact, a length-to-width ratio of 3 - 4 determines a vertex angle of 48o - 63o. A 30o vertex angle is only feasible with long length-to-width ration of about 7.5. Conclusions: The paradigm that surgical ellipses should have a vertex angle of 30o with length-to-width ratio of 3 - 4 is incorrect. Evidence from actual surgical practice and from mathematical formulation shows that either the length-to-width ratio must be larger than 3 - 4 or the vertex angle must be larger than 30 degrees.展开更多
The size and shape of rice grains influence their yield and commercial value.We investigated the role of OsDA1,a rice homolog of the Arabidopsis DA1 gene,in regulating grain size and shape.OsDA1 was highly expressed i...The size and shape of rice grains influence their yield and commercial value.We investigated the role of OsDA1,a rice homolog of the Arabidopsis DA1 gene,in regulating grain size and shape.OsDA1 was highly expressed in young spikelets and glumes.Its overexpression led to enlarged seeds with increased width and decreased length/width ratio(LWR)and knocking out OsDA1 reduced grain width and increased grain length and LWR.A R310K point mutation in the DA1-like domain is a potential target for breeding for increased grain width and length.OsDA1 interacted with TCP gene-family proteins to regulate grain size and shape.Our findings deepen our understanding of the molecular mechanisms underlying grain size regulation and provide useful information for improving grain yield.展开更多
Waste stabilisation pond system has been used more especially in developing countries for sewage treatment. The objective of this study was to investigate the hydraulic and performance efficiency of Palapye waste stab...Waste stabilisation pond system has been used more especially in developing countries for sewage treatment. The objective of this study was to investigate the hydraulic and performance efficiency of Palapye waste stabilisation ponds. The hydraulic efficiency was evaluated through drogue, pond geometry and sludge accumulation assessment. The performance efficiency was evaluated through periodic sampling and analysis of physiochemical and bacteriological parameters of individual units and of the system as a whole. Except for the maturation ponds, the depth of the anaerobic pond had reduced from 4 m to 0.45 m, for facultative ponds from 2.0 m to a range of 0.52 m - 0.91 m. The design hydraulic retention time of the system had reduced from 20 days to 7.1 days. The concentration of some physiochemical parameters in the effluent was 305 mg·L-1, 277 Nephelometric Turbidity Units (NTU), 204 mg·L-1, 156 mg·L-1, 110 mg·L-1, and 15 mg·L-1 being total suspended solids, turbidity, nitrates, chemical oxygen demand, biochemical oxygen demand and phosphate respectively. These values were more than the standard limits of the country. Effluent total coliforms concentration was 3.6 log units and within the threshold of 4.3 log units, faecal coliforms concentration was 3.5 log units, slightly higher than the threshold of 3 log units. Though Escherichia coli have no limits for discharge into other environments, the concentration in the effluent was reasonable at 2.5 log units and also within irrigation limit of 3 log counts. Palapye wastewater treatment system hydraulic efficiency is lower than the design criterion. The system was overall poor in physiochemical parameters removal but better in bacteriological removal.展开更多
Axial compression tests were conducted on AZ31 B magnesium and A6063 aluminum thin-walled square tubes with varied lengths and induced features at different compression rates. In compression, the magnesium tubes exhib...Axial compression tests were conducted on AZ31 B magnesium and A6063 aluminum thin-walled square tubes with varied lengths and induced features at different compression rates. In compression, the magnesium tubes exhibited a "local buckling and fracture" mode, with three fracture patterns, i.e."horizontal","double-oblique", and "spiral" fractures. In general, the magnesium tube showed an inferior crashworthiness to the aluminum square tube. In addition, the effects of L/W ratio, strain rate and induced features on the crashworthiness of thin-walled square tubes were investigated. With an increase in the L/W ratio(L and W represent the tube length and width, respectively) from 1 to 4, the maximal force and global specific energy absorption decreased in a power-law trend for the magnesium tubes,while they remained approximately constant for the aluminum tubes. Furthermore, as the compression rate increased from 5×10-5 to 10 m/s, the primary crashworthiness parameters of the magnesium tubes increased in an approximately exponential manner,while for the aluminum tubes,they changed slightly. Finally,the involved induced features were proven to be not an effective method to improve the specific energy absorption of magnesium tubes, thus, more trigger types,locations,and sizes will be evaluated in future to improve the energy-absorption ability.展开更多
The notion of ratio of width to length is proposed to describe the shaping feature of molten pool of twin-Arc submerged arc welding accurately, and analyze the law of molten pool variation and weld formation. The temp...The notion of ratio of width to length is proposed to describe the shaping feature of molten pool of twin-Arc submerged arc welding accurately, and analyze the law of molten pool variation and weld formation. The temperature field finite element numerical simulation model of twin arc movement is established. The loading form of twin-arc with double ellipsoid heat source is discussed. The molten pool temperature field of twin-arc submerged arc welding is calculated and analyzed under different process parameters. The law of molten pool characteristics influenced by the welding speed, current and voltage of twin-arc submerged arc welding parameters is analyzed. The relation between shaping feature of molten pool and weld formation is discussed according to the ratio of width to length. The results manifested that the width to length ratio of weld pool decreases with the improvement of welding speed, which result in gene- ration of weld defects. The width to length ratio of weld pool is increased by adjusting the proportion of the current, voltage and the distance of the two arcs, which avoids the generation of weld defects.展开更多
文摘Background: It has been postulated that elliptical cutaneous excisions must possess a length-to-width ratio of 3 to 4 and a vertex angle of 30o or less in order to be closed primarily without creating a “dog ear”. These dimensions became axiomatic in cutaneous surgery and have been taught in the apprenticeship model for years. The present article examines the validity of that paradigm. Methods: We collected data from two sources: ellipses described in the literature (57 cases);and elliptical excisions performed at the authors’ outpatient clinic (83 cases). The surgical ellipse lengths, widths, and vertex angles were analyzed, and the data were compared to a mathematical formula used to generate a fusiform ellipse. Results: The length-to-width ratio of 3 - 4 was found to be inconsistent with the recommended vertex angle of 30o. In fact, a length-to-width ratio of 3 - 4 determines a vertex angle of 48o - 63o. A 30o vertex angle is only feasible with long length-to-width ration of about 7.5. Conclusions: The paradigm that surgical ellipses should have a vertex angle of 30o with length-to-width ratio of 3 - 4 is incorrect. Evidence from actual surgical practice and from mathematical formulation shows that either the length-to-width ratio must be larger than 3 - 4 or the vertex angle must be larger than 30 degrees.
基金This work is supported in part by the National Transgenic Science and Technology Program(2016ZX08010-002)National Natural Science Foundation of China(157101834)Agricultural Science and Technology Innovation Program of CAAS.
文摘The size and shape of rice grains influence their yield and commercial value.We investigated the role of OsDA1,a rice homolog of the Arabidopsis DA1 gene,in regulating grain size and shape.OsDA1 was highly expressed in young spikelets and glumes.Its overexpression led to enlarged seeds with increased width and decreased length/width ratio(LWR)and knocking out OsDA1 reduced grain width and increased grain length and LWR.A R310K point mutation in the DA1-like domain is a potential target for breeding for increased grain width and length.OsDA1 interacted with TCP gene-family proteins to regulate grain size and shape.Our findings deepen our understanding of the molecular mechanisms underlying grain size regulation and provide useful information for improving grain yield.
文摘Waste stabilisation pond system has been used more especially in developing countries for sewage treatment. The objective of this study was to investigate the hydraulic and performance efficiency of Palapye waste stabilisation ponds. The hydraulic efficiency was evaluated through drogue, pond geometry and sludge accumulation assessment. The performance efficiency was evaluated through periodic sampling and analysis of physiochemical and bacteriological parameters of individual units and of the system as a whole. Except for the maturation ponds, the depth of the anaerobic pond had reduced from 4 m to 0.45 m, for facultative ponds from 2.0 m to a range of 0.52 m - 0.91 m. The design hydraulic retention time of the system had reduced from 20 days to 7.1 days. The concentration of some physiochemical parameters in the effluent was 305 mg·L-1, 277 Nephelometric Turbidity Units (NTU), 204 mg·L-1, 156 mg·L-1, 110 mg·L-1, and 15 mg·L-1 being total suspended solids, turbidity, nitrates, chemical oxygen demand, biochemical oxygen demand and phosphate respectively. These values were more than the standard limits of the country. Effluent total coliforms concentration was 3.6 log units and within the threshold of 4.3 log units, faecal coliforms concentration was 3.5 log units, slightly higher than the threshold of 3 log units. Though Escherichia coli have no limits for discharge into other environments, the concentration in the effluent was reasonable at 2.5 log units and also within irrigation limit of 3 log counts. Palapye wastewater treatment system hydraulic efficiency is lower than the design criterion. The system was overall poor in physiochemical parameters removal but better in bacteriological removal.
基金Project(2017JBM041)supported by the Fundamental Research Funds for the Central Universities,ChinaProject(51505024)supported by the National Natural Science Foundation of ChinaProject supported by the Foundation of Zhejiang Key Laboratory of Automobile Safety Technology of China
文摘Axial compression tests were conducted on AZ31 B magnesium and A6063 aluminum thin-walled square tubes with varied lengths and induced features at different compression rates. In compression, the magnesium tubes exhibited a "local buckling and fracture" mode, with three fracture patterns, i.e."horizontal","double-oblique", and "spiral" fractures. In general, the magnesium tube showed an inferior crashworthiness to the aluminum square tube. In addition, the effects of L/W ratio, strain rate and induced features on the crashworthiness of thin-walled square tubes were investigated. With an increase in the L/W ratio(L and W represent the tube length and width, respectively) from 1 to 4, the maximal force and global specific energy absorption decreased in a power-law trend for the magnesium tubes,while they remained approximately constant for the aluminum tubes. Furthermore, as the compression rate increased from 5×10-5 to 10 m/s, the primary crashworthiness parameters of the magnesium tubes increased in an approximately exponential manner,while for the aluminum tubes,they changed slightly. Finally,the involved induced features were proven to be not an effective method to improve the specific energy absorption of magnesium tubes, thus, more trigger types,locations,and sizes will be evaluated in future to improve the energy-absorption ability.
文摘The notion of ratio of width to length is proposed to describe the shaping feature of molten pool of twin-Arc submerged arc welding accurately, and analyze the law of molten pool variation and weld formation. The temperature field finite element numerical simulation model of twin arc movement is established. The loading form of twin-arc with double ellipsoid heat source is discussed. The molten pool temperature field of twin-arc submerged arc welding is calculated and analyzed under different process parameters. The law of molten pool characteristics influenced by the welding speed, current and voltage of twin-arc submerged arc welding parameters is analyzed. The relation between shaping feature of molten pool and weld formation is discussed according to the ratio of width to length. The results manifested that the width to length ratio of weld pool decreases with the improvement of welding speed, which result in gene- ration of weld defects. The width to length ratio of weld pool is increased by adjusting the proportion of the current, voltage and the distance of the two arcs, which avoids the generation of weld defects.
