Stability evaluation method of large cross-section tunnel considering modification of thickness-span ratio in mechanized operation

Purpose-This study aims to research the large cross-section tunnel stability evaluation method corrected after considering the thickness-span ratio.Design/methodology/approach-First,taking the Liuyuan Tunnel of Huanggang-Huangmei High-Speed Railway as an example and taking deflection of the third principal stress of the surrounding rock at a vault after tunnel excavation as the criterion,the critical buried depth of the large section tunnel was determined.Then,the strength reduction method was employed to calculate the tunnel safety factor under different rock classes and thickness-span ratios,and mathematical statistics was conducted to identify the relationships of the tunnel safety factor with the thickness-span ratio and the basic quality(BQ)index of the rock for different rock classes.Finally,the influences of thickness-span ratio,groundwater,initial stress of rock and structural attitude factors were considered to obtain the corrected BQ,based on which the stability of a large cross-section tunnel with a depth of more than 100 m during mechanized operation was analyzed.This evaluation method was then applied to Liuyuan Tunnel and Cimushan No.2 Tunnel of Chongqing Urban Expressway for verification.Findings-This study shows that under different rock classes,the tunnel safety factor is a strict power function of the thickness-span ratio,while a linear function of the BQ to some extent.It is more suitable to use the corrected BQ as a quantitative index to evaluate tunnel stability according to the actual conditions of the site.Originality/value-The existing industry standards do not consider the influence of buried depth and span in the evaluation of tunnel stability.The stability evaluation method of large section tunnel considering the correction of overburden span ratio proposed in this paper achieves higher accuracy for the stability evaluation of surrounding rock in a full or large-section mechanized excavation of double line high-speed railway tunnels.

Effects of salinity on egg and fecal pellet production, development and survival, adult sex ratio and total life span in the calanoid copepod, A cartia tonsa:a laboratory study

The ef fects of salinity on the copepod, A cartia tonsa in terms of daily egg production rate(EPR), hatching success, fecal pellet production rate(FPR), naupliar development time and survival, sex ratio, and total life span were determined in laboratory conditions through three experiments. In experiment 1, EPR, hatching success, and FPR of individual females were monitored at salinities of 13, 20, 35 and 45 during short-periods(seven consecutive days). Results show EPR was aff ected by salinity with the highest outputs recorded at 20 and 35, respectively, which were considerably higher than those at 13 and 45. Mean FPR was also higher in 35 and 20. In experiment 2, the same parameters were evaluated over total life span of females(long-term study). The best EPR and FPR were observed in 35, which was statistically higher than at 13 and 20. In experiment 3, survival rates of early nauplii until adult stage were lowest at a salinity of 13. The development time increased with increasing of salinity. Female percentage clearly decreased with increasing salinity. Higher female percentages(56.7% and 52.2%, respectively) were signifi cantly observed at two salinities of 13 and 20 compared to that at 35(25%). Total longevity of females was not af fected by salinity increment. Based on our results, for mass culture we recommend that a salinity of 35 be adopted due to higher reproductive performances, better feeding, and faster development of A. tonsa.

Assistant pullback technique for main span closure of Sutong Bridge

Sutong Bridge is a cable-stayed steel box girder bridge with a main span of 1 088 m. The erection of upper structure adopts geometry control method and requires no change to the unit＇ s size and the structure＇ s none-stress geometry. Before main span closure, the cantilever of girder reaches 540.8 m, the structure state is noticeably influenced by extemal circumstances, the main span closure face great difficulty. By abstracting the advantage of the pullback method abroad and the domestic temperature-cutting method, a new assistant pullback method have put forward and bring into practice actually. In this paper, the analysis key point of practice conditions, key parameter of practice, main measures of the method and the performance is introduced.

Experimental research on shear carrying capacity of H-steel concrete composite beam with small shear span ratio

In order to investigate shear carrying capacity of H-steel concrete beam with small shear span ratio,shear test on 5 H-steel concrete composite beams with small span ratio (from 0.7 to 1.1) are reported,including test design,test scheme,test method,failure characteristics and test results. Influences of shear span ratio,web of H steel and concrete on shear carrying capacity of this kind of beam are investigated. The main components comprising shear bearing capacity are analyzed. The results show that with the shear span ratio increasing,the contribution of web of H steel and concrete on shear carrying capacity decrease. Based on test data,the calculation formula of shear carrying capacity for this beam is established by curve fitting.

Seismic analysis of a long-span continuous steel truss-arch bridge across the Yangtze River

In this paper, an FEM （Finite Element Method） model is established for the main span of the bridge, with the main box arch and suspender members modeled by beam elements, truss members by truss elements, and the orthotropic steel deck by plate elements. The natural frequencies and mode shapes are acquired by the eigen-parameter analysis. By input of a typical earthquake excitation to the bridge system, the dynamic responses of the bridge, including the displacement and accelerations of the main joints of the structure, and the seismic forces and stresses of the key members, are calculated by the structural analysis program, based on which the main laws of the seismic responses of the bridge are summarized, and the safety of the structure is evaluated.

Dynamic behavior of single-layer latticed cylindrical shells subjected to seismic loading

The single-layer latticed cylindrical shell is one of the most widely adopted space-fl'amed structures.In this paper,free vibration properties and dynamic response to horizontal and vertical seismic waves of single-layer latticed cylindrical shells are analyzed by the finite element method using ANSYS software.In the numerical study,where hundreds of cases were analyzed,the parameters considered included rise-span ratio,length-span ratio,surface load and member section size.Moreover,to better define the actual behavior of single-layer latticed shells,the study is focused on the dynamic stress response to both axial forces and bending moments.Based on the numerical results,the effects of the parameters considered on the stresses are discussed and a modified seismic force coefficient method is suggested.In addition,some advice based on these research results is presented to help in the future design of such structures.

Research on the Construction Characteristics of Stone-Built Folk Houses in Jiarong Tibetan Area <br/>—Take the Stone-Built Houses in Xisuo Village as an Example

The Jiarong Tibetan traditional residence is a characteristic regional architecture, located in a high-intensity, high-altitude and cold area, with geographic identification, and is a typical representative of this ethnic group. It has also become an important tourist destination and has important research value. The research used the methods of field survey surveying and mapping to conduct field survey and surveying on 20 buildings in Xisuo Village, a traditional village in the Jiarong Tibetan area. Measure building plans, elevations, and building sections, and collect measurement data for statistical analysis. The results show that the average total height of the building is 10.08 m, the average total building span is 12.44 m, the average total depth is 10.87 m, and the squareness is 0.87. The square shape of the building is more in line with the seismic requirements of high-intensity areas and the local terrain environment. The maximum window-wall ratio in the building is 0.18 south for the second floor, and 0.025 west for the first floor. Smaller window-to- wall ratios have better adaptability to high-altitude cold areas. The height of the building beam section is generally from 0.17 m to 0.32 m, and the average Beam span-depth ratio is 0.10. The building space construction has a good match with the properties of wood materials. These conclusions quantitatively analyze the characteristics of stone-built houses in high-intensity, high-altitude and cold areas, supplement the research on ethnic regional architecture, and provide materials and references for the design, repair and update of related buildings.

深井松软围岩煤巷采动增跨效应及防控技术

针对深井松软煤巷围岩变形严重、巷道支护困难等问题,以城郊煤矿LW21106工作面沿空巷道为工程背景,建立了采动巷道增跨模型,揭示了采动增跨效应演化机理。通过构建巷道顶板横纵弯曲梁模型,指出顶板横向受力、巷道等效跨度、煤岩强度是巷道围岩损伤破坏的主控因素,提出了采动增跨效应防控对策并进行工业性试验。研究结果表明:受采动影响,巷道经历“初始围岩稳定—围岩裂隙发育扩展—围岩剪切破坏加剧—等效跨度增加”过程;巷道顶板最大正应力与应力集中系数、顶板等效跨度、巷道断面尺寸及埋深成正相关关系;巷道顶板在高应力环境下易发生拉剪破坏,增加顶板锚索数量以及锚索预紧力有利于增强顶板初期完整性。基于巷道变形破坏主控因素,提出“围岩加固–卸压–强化支护”协同防控策略;针对现场条件,采用煤柱侧向切顶+注浆加固并对破碎区域补充锚索强化支护的防控技术。现场监测结果表明,煤柱帮最大移近量为18.89cm,顶板下沉量为25.86cm,两帮移近量为29.65 cm,有效控制了煤巷围岩变形,为深井松软围岩巷道变形控制提供了参考。

基于不同流动时间占比的紧凑式室温磁制冷系统实验研究

磁制冷因高效、环保、结构简单等特点,正有望成为替代传统蒸气制冷的新型室温制冷技术之一.当前针对单一影响因子对磁制冷样机的影响作用规律研究较为丰富,但对磁场-流场时序中流动时间占比工况的研究较少,且影响规律尚不明晰.本文以前期研制的紧凑型室温磁制冷系统为基础,在固定的磁场时序情况下开展不同流动时间占比的实验研究,探索制冷温跨、制冷量、压降及性能系数与流动时间占比之间的关联.以磁场时序1:4:1:4与频率0.45 Hz的工况为例,开展了固定磁场时序的不同流动时间占比(100%,80%,60%)的实验研究.结果表明:1)小利用系数和高流动时间的组合可获得较大温跨,大利用系数和高流动时间占比的组合可获得较大冷量,其中当利用系数为0.42、流动时间占比为100%时,获得最大无负荷制冷温跨26.2 K;2)对比研究了利用系数与流动时间占比对回热器压降及性能系数的影响,流动时间占比的增大和利用系数的减小均会造成流体速度的减小,会使压降进一步减小,性能系数进一步增大.本研究阐明了制冷温跨、制冷量、压降及性能系数与流动时间占比之间的影响规律,为进一步提升室温磁制冷机的性能奠定基础.

复合空间索对大跨度铁路悬索桥横向刚度影响的研究

为提升大跨度铁路悬索桥的横向刚度,提出一种由主、副斜拉索组成的复合空间索结构。然后,基于材料有效利用率和静力分析,对复合空间索的直径、主斜拉索在加劲梁和地表的锚点位置、副斜拉索的数量等参数进行了优化。最后,采用风-车-桥耦合振动分析法,基于行车性能得到了桥梁横向挠跨比限值,分析了主、副斜拉索对横向挠跨比限值提升率的影响。结果表明:基于材料有效利用率,主斜拉索与加劲梁的锚点位置宜设在1/4主跨附近,且主斜拉索的地表锚点、加劲梁锚点与桥塔的垂直距离相等时最优,每组复合空间索中副斜拉索设置1根即可;在复合空间索的最优布置形式下,桥梁横向挠跨比可降低14.18%,横向挠跨比限值可提升16.79%。

基于工程经济性的公路悬索桥主缆最优垂跨比研究

为寻求工程经济性最优的公路悬索桥主缆垂跨比,以我国近年多座采用混凝土桥塔的单跨公路悬索桥为背景,建立主缆、锚碇、桥塔基础工程量的直接函数模型和桥塔塔身工程量的非线性函数拟合模型,对跨度750~2250 m、单层车道数4~8及双层车道数6+4、垂跨比1/14~1/6共952种布置形式的悬索桥进行大范围关于主缆垂跨比的工程经济性研究,并以2座实桥为算例分析主缆垂跨比对悬索桥静、动力性能及抗风性能的影响。结果表明:主缆垂跨比对悬索桥工程经济性影响显著;悬索桥主缆最优垂跨比与跨度相关,而车道数、加劲梁荷载集度的影响相对较小,涉水和不涉水的差异也不显著;基于工程经济性考虑,跨度750~2250 m的悬索桥主缆最优垂跨比为1/6.5~1/8.5,比经验值增大较多。2座实桥算例分析表明随着垂跨比增加,加劲梁挠度和活载应力有所增加,抗风性能略有提升,建议方案设计阶段加大垂跨比研究范围、对工程经济性和桥梁力学性能进行综合比选。

四主缆大跨悬索桥抗震性能分析及减震措施优化

以燕矶长江大桥为工程背景,首先,采用动力非线性时程法分析了燕矶长江大桥抗震性能,并研究了设置电涡流-摩擦组合型阻尼器和黏滞阻尼器对大跨悬索桥抗震性能的影响;然后,对附加电涡流-摩擦组合型阻尼器摩擦力、阻尼系数和阻尼指数开展了参数敏感性分析;最后,从耗能角度分析地震作用下电涡流-摩擦组合型阻尼器减震特点.结果表明:在E2地震作用下,桥塔关键截面抗弯能力均大于弯矩需求;在“纵向+竖向”地震作用下梁端纵向位移较大.设置塔梁处纵桥向阻尼器后,可有效降低主桥梁端纵向位移;增大摩擦力、阻尼系数与降低阻尼指数均可提升梁端纵向地震响应的控制效果,但参数变化对桥塔控制截面的地震响应影响较小.阻尼系数较大时,电涡流阻尼主导了电涡流-摩擦组合型阻尼器耗能,相较于黏滞阻尼器,电涡流-摩擦组合型阻尼器对梁端纵向位移控制效果更好.

大跨度铁路桥附属构件对不同宽高比矩形断面涡振性能的影响

在已建成的大跨度鳊鱼洲长江大桥原设计宽高比为6.7∶1的四线铁路桥矩形箱型主梁断面的基础上,通过调整断面宽高比,设计宽高比为4∶1的二线铁路和宽高比为9∶1的六线铁路桥矩形箱梁断面。通过节段模型风洞试验,在0°,±3°和±5°风攻角的均匀来流下,对以上3种常用二线、四线和六线铁路桥矩形箱梁断面与对应相同宽高比纯矩形断面之间的涡振特性关系,以及铁路桥附属构件对不同宽高比矩形断面涡振性能的影响进行研究。结果表明:在宽高比分别为4∶1和6.7∶1的矩形断面上布置铁路桥附属构件能增大断面在负风攻角下的涡振振幅,在-5°风攻角下竖向涡振振幅增大率高达277.5%,但对正风攻角下的涡振响应起到一定的抑制作用,而在宽高比为9∶1的矩形断面布置六线铁路桥附属构件则能明显增大该断面在各风攻角下的涡振振幅,其扭转涡振振幅增大率均在48.3%以上;铁路桥附属构件对矩形断面涡振性能的降低作用随着断面宽高比的增大而提升,针对气动外形较钝的二线和四线铁路桥箱梁,可参考相似宽高比矩形断面涡振特性,并重点考察箱梁在负风攻角下的涡振响应,而针对宽高比较大的六线铁路桥箱梁,由于附属构件影响较大,参考相似宽高比矩形断面涡振特性的意义较小,均应详细研究其在各风攻角下的涡振性能。

深江铁路洪奇沥公铁大桥主桥设计关键技术

研究目的:洪奇沥公铁大桥是深江铁路的控制性工程,主桥采用主跨808 m公铁合建斜拉桥一跨跨越洪奇沥水道,上层布置8车道城市快速路,下层布置4线铁路。结合建设条件、结构特点及使用性能,对主桥结构体系、主梁横断面及结构形式、索-塔锚固结构、施工方法等关键技术展开研究,确定技术合理可行和经济节约的设计方案。研究结论:(1)首创了短边跨叠合板-桁组合梁斜拉桥结构体系,主桥长度减少20%,节省工程投资;(2)首次在4线铁路公铁合建斜拉桥上采用倒梯形双主桁截面,桥面布置紧凑、受力明确;(3)提出的边跨主梁采用矩形钢管混凝土叠合板-桁组合结构,集结构受力和锚固压重于一体,施工便捷;(4)发明了“自平衡交叉锚固+齿块锚固”的索-塔混合锚固方式,技术经济性高;(5)钢主梁创新采用“纵向大节段+横向分块”施工方法,解决了超宽超高超重整节段钢桁梁运输受既有桥净空限制的难题;(6)本研究成果可为公铁合建桁梁斜拉桥设计提供参考或借鉴。

索-悬链线拱联合结构的受力机理与力学特征

早期拱桥已运营多年,缺乏有效的养护,且设计荷载等级偏低;随着交通量的增加及车辆超载,其在活载作用下的力学性能已不能满足现代交通需求。为改善此类拱桥的受力性能,提出一种索-悬链线拱联合结构,在拱肋两侧对称设置索,使索和拱肋形成新的受力体系,从而改变悬链线拱结构的传力路径,进而降低拱结构的内力。在索-拱联合结构图式下,基于弹性中心法对其力法方程进行简化,采用近似曲线积分方法推导了竖向移动荷载作用下拱肋的内力解析解,并借助ANSYS有限元软件验证解析解的准确性;分析了在车道荷载作用下索约束位置、拱轴系数、矢跨比和轴向刚度比等设计参数对拱结构的影响,揭示了索-拱联合结构的受力机理和内力变化规律。研究表明,内力解析解与有限元结果的相对误差在1%以内;索的设置改变了拱结构弯矩影响线量值的正、负区间分布,而且有效地降低了拱结构弯矩影响线的峰值,从而使拱结构的整体弯矩得到较大幅度的降低,弯矩分布更均匀;沿拱脚至拱顶,拱结构弯矩的降低幅度和轴力的增长幅度均逐渐减小;轴向刚度比从0.02增加至0.10,拱脚负弯矩的减小幅度呈非线性增大,最大降幅达63.7%;索力的增长幅度与其数值大小成反比,当索设置在距拱顶0.3L(L为拱跨经)时,索力可增至轴向刚度比为0.02时的1.9倍。矢跨比对拱结构内力带来的影响不容忽视,矢跨比越大拱结构的内力变化幅度越大;拱轴系数对拱结构内力的影响可以忽略。

嵌入式H型钢梁柱节点受力性能研究

为解决传统标准梁柱节点施工复杂、节点强度低等一系列问题,提出一种嵌入式H型钢梁柱节点结构形式,并设计4个梁柱节点试件(1个标准现浇梁柱节点试件,3个嵌入式H型钢梁柱节点试件)进行试验研究,设置型钢翼缘宽度、剪跨比为主要参数,对4个试件的破坏形态、承载力、变形能力进行对比分析。结果表明:嵌入式H型钢梁柱节点试件的节点核心区柱端混凝土裂缝较少,裂缝分布和破坏位置基本上发生于梁端,充分满足了“强柱弱梁”的设计要求;相较于标准现浇梁柱节点试件,嵌入式H型钢梁柱节点试件峰值承载力、极限承载力、变形能力均显著提高,当型钢翼缘加宽时,试件峰值承载力和极限承载力提升较为有限,当剪跨比大于2.7时,承载力将会明显降低。

水平往复荷载作用下钢箱提篮拱弹塑性力学性能研究

目的 探究倾角、矢跨比及宽跨比三个参数对钢箱提篮拱在水平往复荷载作用下力学性能的影响,为钢提篮拱桥抗震设计提供理论基础。方法 通过改变参数,建立54个钢箱提篮拱有限元模型,在水平往复荷载作用下进行滞回分析,研究钢箱提篮拱水平力-位移滞回性能、极限承载力和拱顶横撑内力、变形在不同参数条件下的变化规律。结果 随着拱肋倾斜角度、宽跨比的增加或矢跨比的减小,结构初期刚度、极限承载能力均有较大提高,但横撑内力也随之增加,并会产生局部失稳破坏,影响结构的承载能力。结论 增加拱肋倾斜角度对钢箱提篮拱横向力学性能有较大改善,但在设计时应注意横撑内力增加带来的不利影响。

大跨度桥梁超低频调谐液体质量阻尼器研发及应用

大跨度桥梁在运营过程中易发生较为明显的超低频振动问题,采用调谐质量阻尼器(TMD)进行控制时,由于箱梁内部空间有限,常规TMD在结构上无法满足要求。基于此,提出一种基于浮力和流固耦合作用的超低频调谐液体质量阻尼器(TLMD)。为研究TLMD对结构的阻尼减振效果,进行模型试验,分析安装TLMD前、后主结构加速度幅值和阻尼比;将该新型超低频TLMD在贵州龙里河大桥上进行实桥应用,测试主梁频率特性和阻尼比。模型试验及实桥应用结果表明:TLMD减振技术可实现0.283 Hz乃至更低频率的超低频阻尼减振;采取TLMD控制后,模型试验主结构的阻尼比从0.038%提高至2.2%,主结构的加速度幅值从减振前的0.41 m/s2降低至0.01 m/s2;贵州龙里河大桥超低频TLMD当采用0.31%的质量比时,主梁一阶竖弯模态实测阻尼比从0.20%提高至0.82%,阻尼比提高了3.1倍。超低频TLMD参数稳定、性能可靠,有效降低了阻尼器的安装高度,显著提升了结构阻尼比,增强了桥梁的抗风性能。

预制UHPC永久模板钢筋混凝土组合梁抗剪性能有限元分析

为了研究预制超高性能混凝土永久模板钢筋混凝土组合梁抗剪性能,选取合适的U型UHPC预制单元本构关系,建立了钢筋混凝土梁的有限元永久模型,并与已有的试验数据进行比较,验证了模型的可靠性,并分析配箍率、剪跨比等参数对超高性能混凝土组合梁抗剪性能的影响。结果显示:超高性能混凝土预制单元可显著提高斜向开裂荷载和极限荷载;预制单元会限制箍筋的作用,所以配箍率对组合梁影响小;剪跨比对组合梁抗剪性能影响大,但是和配箍率一样都会影响其延性。

上海超深基坑地下连续墙的空间变形特性实测分析

基于大量现场实测数据,对上海城区某大型通道工程超深基坑在开挖和降水耦合作用下地下连续墙的空间变形特性及规律进行了详细分析与研究。结果表明:①当基坑长深比、长宽比较小时,受坑角效应影响,地下连续墙变形呈现显著的三维效应,且局部出现较大横向挠曲,其中靠近坑角两侧的局部挠跨比大于中部,靠近坑角两侧的横向挠跨比平均值约为(0.32~0.56)δ_(h)/H_(e),跨中位置横向挠跨比平均值约为(0.15~0.23)δ_(h)/H_(e);②地下连续墙最大侧移δhm随着开挖深度H的增加而呈非线性变化,特别地当开挖深度H超过12m之后,其变化率明显增加;③大幅度坑内超前预降水的卸荷效应会造成地下连续墙先期变形显著增加,并导致后续累计变形的大幅增加,受此影响,基坑开挖期间地下连续墙最大侧移及竖向变形分别为0.7%He,0.1%He(回弹),坑中立柱回弹变形最大为0.2%He,约为地下墙回弹的两倍,各变形量均显著大于上海地铁标准车站基坑(深度16~20 m)的实测统计数据。因此,在超深基坑施工过程中应尽量采用分步降水方式,避免一次性预降水。