In this paper, a FCC co-catalyst for enhancing the light oil production was prepared by the sol-gel method, and its effect on the performance of residue cracking catalysts was evaluated in a CCFFB reactor. The test re...In this paper, a FCC co-catalyst for enhancing the light oil production was prepared by the sol-gel method, and its effect on the performance of residue cracking catalysts was evaluated in a CCFFB reactor. The test results indicated that the liquid product yield increased obviously, after the surface of FCC equilibrium catalyst was impregnated with the co-catalyst. The yields of dry gas, slurry and coke decreased, while the diesel yield changed slightly. And the crackability of residue was increased; the rate of coke deposition on catalyst surface was decreased, with the thermal cracking reactions inhibited. All these results showed that the co-catalyst could improve the density of acid sites and change the catalyst acidity, which could promote to prolong the catalyst activity by depositing the co-catalyst on the surface of FCC equilibrium catalysts.展开更多
The distributed acoustic sensor(DAS)uses a single optical cable as the sensing unit,which can capture the acoustic and vibration signals along the optical cable in real-time.So it is suitable for monitoring downhole p...The distributed acoustic sensor(DAS)uses a single optical cable as the sensing unit,which can capture the acoustic and vibration signals along the optical cable in real-time.So it is suitable for monitoring downhole production activities in the process of oil and gas development.The authors applied the DAS system in a gas production well in the South China Sea for in situ monitoring of the whole wellbore for the first time and obtained the distributed acoustic signals along the whole wellbore.These signals can clearly distinguish the vertical section,curve section,and horizontal production section.The collected acoustic signal with the frequency of approximately 50 Hz caused by the electric submersible pump exhibit a signal-to-noise ratio higher than 27 dB.By analyzing the acoustic signals in the production section,it can be located the layers with high gas production rates.Once an accurate physical model is built in the future,the gas production profile will be obtained.In addition,the DAS system can track the trajectory of downhole tools in the wellbore to guide the operation.Through the velocity analysis of the typical signals,the type of fluids in the wellbore can be distinguished.The successful application of the system provides a promising whole wellbore acoustic monitoring tool for the production of marine gas hydrate,with a good application prospect.展开更多
文摘In this paper, a FCC co-catalyst for enhancing the light oil production was prepared by the sol-gel method, and its effect on the performance of residue cracking catalysts was evaluated in a CCFFB reactor. The test results indicated that the liquid product yield increased obviously, after the surface of FCC equilibrium catalyst was impregnated with the co-catalyst. The yields of dry gas, slurry and coke decreased, while the diesel yield changed slightly. And the crackability of residue was increased; the rate of coke deposition on catalyst surface was decreased, with the thermal cracking reactions inhibited. All these results showed that the co-catalyst could improve the density of acid sites and change the catalyst acidity, which could promote to prolong the catalyst activity by depositing the co-catalyst on the surface of FCC equilibrium catalysts.
基金jointly supported by the Science and Technology Program of Guangzhou (202103040003)the offshore NGHs production test projects under the Marine Geological Survey Program initiated by the China Geological Survey (DD20190226, DD20190218 and DD20221706)+2 种基金the Key Program of Marine Economy Development Special Foundation of Department of Natural Resources of Guangdong Province (GDNRC [2020] 045)the financial support from China Geological Survey (DD20221703)the National Natural Science Foundation of China (NSFC) (6210030553)。
文摘The distributed acoustic sensor(DAS)uses a single optical cable as the sensing unit,which can capture the acoustic and vibration signals along the optical cable in real-time.So it is suitable for monitoring downhole production activities in the process of oil and gas development.The authors applied the DAS system in a gas production well in the South China Sea for in situ monitoring of the whole wellbore for the first time and obtained the distributed acoustic signals along the whole wellbore.These signals can clearly distinguish the vertical section,curve section,and horizontal production section.The collected acoustic signal with the frequency of approximately 50 Hz caused by the electric submersible pump exhibit a signal-to-noise ratio higher than 27 dB.By analyzing the acoustic signals in the production section,it can be located the layers with high gas production rates.Once an accurate physical model is built in the future,the gas production profile will be obtained.In addition,the DAS system can track the trajectory of downhole tools in the wellbore to guide the operation.Through the velocity analysis of the typical signals,the type of fluids in the wellbore can be distinguished.The successful application of the system provides a promising whole wellbore acoustic monitoring tool for the production of marine gas hydrate,with a good application prospect.
