After water cooling, there is a big temperature difference between the center and the surface of strip, which leads to the heat transfer from the center to the surface, and the surface temperature can rise in a short ...After water cooling, there is a big temperature difference between the center and the surface of strip, which leads to the heat transfer from the center to the surface, and the surface temperature can rise in a short time. The finite element method was used to simulate the phenomena of re-reddening on the surface of strip and to analyze the temperature field of hot roiled strip during laminar cooling, and the periodical variation curve of the cooling rate was obtained during water cooling and subsequent re-reddening. The results show that the critical line of the cooling rate is at 1/3 of the half-thickness from the strip surface. The regression model of the relation of rereddening temperature, time, and distance from the surface was obtained in the re-reddening region. Re-reddening regularity on the surface of strip under the condition of different thickness and cooling rate was also studied.展开更多
Temperature deviation between surface and the center of hot rolled strip is formed during ultra-fast cooling （UFC）. Surface temperature would rise when temperature deviation goes up to an extent, and strip re-redden...Temperature deviation between surface and the center of hot rolled strip is formed during ultra-fast cooling （UFC）. Surface temperature would rise when temperature deviation goes up to an extent, and strip re-reddening phenomenon will appear. Strip re-reddening affects the stability of strip microstructure, property and temperature control precision. Thus, it is necessary to conduct research on re-reddening temperature changing law to improve strip property and temperature control precision. Strip temperature trends for various strip thicknesses and ultra-fast cooling rates were obtained by numerical calculation method. Re-reddening temperature, temperature deviation between surface and center, and boundary layer position changing law were obtained. By comparison, some conclusions were obtained： UFC re-reddening temperature and laminar cooling （LC） re-reddening temperature were linear to ultra-fast cooling rate respectively. Ultra-fast cooling rate affected UFC re-reddening temperature greatly, but it had little effect on LC re-reddening temperature. Equations which were used to calculate UFC re-reddening temperature, LC re-reddening temperature and maximum temperature deviation were obtained. The position of boundary layer stayed in 1/4 strip thickness.展开更多
The ultra-fast cooling technology of large section bars and the microstrueture for different cooling patterns were studied by optical microscope, transmission electron microscope and energy spectrometer. The results i...The ultra-fast cooling technology of large section bars and the microstrueture for different cooling patterns were studied by optical microscope, transmission electron microscope and energy spectrometer. The results indicated that the large section bars were passed through the zone of secondary carbide precipitation quickly by ultra-fast cooling technology （UFC） at instantaneous cooling rate of about 200 ℃/s and the finishing cooling temperature was higher than Ms. The lamellar spacing of pearlite decreased and the microhardness increased with decreasing the rereddening temperature. The precipitation of network carbide was restrained when re-reddening temperature was 690 ℃. And fine laminated pearlite was obtained through transformation of pseudopearlition that induced the reduction of the diameter of pearlite grain and refinement of the lamellar spacing of pearlite, so ideal microstructures of promoting spheroidizing annealing were obtained.展开更多
基金Item Sponsored by National Natural Science Foundation of China(50504007)State Basic Research Key Projects (973) of China(2006CB605208-1)
文摘After water cooling, there is a big temperature difference between the center and the surface of strip, which leads to the heat transfer from the center to the surface, and the surface temperature can rise in a short time. The finite element method was used to simulate the phenomena of re-reddening on the surface of strip and to analyze the temperature field of hot roiled strip during laminar cooling, and the periodical variation curve of the cooling rate was obtained during water cooling and subsequent re-reddening. The results show that the critical line of the cooling rate is at 1/3 of the half-thickness from the strip surface. The regression model of the relation of rereddening temperature, time, and distance from the surface was obtained in the re-reddening region. Re-reddening regularity on the surface of strip under the condition of different thickness and cooling rate was also studied.
基金Sponsored by State"1025"Science and Technology Support Projects of China(2012BAF04B01)
文摘Temperature deviation between surface and the center of hot rolled strip is formed during ultra-fast cooling （UFC）. Surface temperature would rise when temperature deviation goes up to an extent, and strip re-reddening phenomenon will appear. Strip re-reddening affects the stability of strip microstructure, property and temperature control precision. Thus, it is necessary to conduct research on re-reddening temperature changing law to improve strip property and temperature control precision. Strip temperature trends for various strip thicknesses and ultra-fast cooling rates were obtained by numerical calculation method. Re-reddening temperature, temperature deviation between surface and center, and boundary layer position changing law were obtained. By comparison, some conclusions were obtained： UFC re-reddening temperature and laminar cooling （LC） re-reddening temperature were linear to ultra-fast cooling rate respectively. Ultra-fast cooling rate affected UFC re-reddening temperature greatly, but it had little effect on LC re-reddening temperature. Equations which were used to calculate UFC re-reddening temperature, LC re-reddening temperature and maximum temperature deviation were obtained. The position of boundary layer stayed in 1/4 strip thickness.
基金Sponsored by National Natural Science Foundation of China(50334010)
文摘The ultra-fast cooling technology of large section bars and the microstrueture for different cooling patterns were studied by optical microscope, transmission electron microscope and energy spectrometer. The results indicated that the large section bars were passed through the zone of secondary carbide precipitation quickly by ultra-fast cooling technology （UFC） at instantaneous cooling rate of about 200 ℃/s and the finishing cooling temperature was higher than Ms. The lamellar spacing of pearlite decreased and the microhardness increased with decreasing the rereddening temperature. The precipitation of network carbide was restrained when re-reddening temperature was 690 ℃. And fine laminated pearlite was obtained through transformation of pseudopearlition that induced the reduction of the diameter of pearlite grain and refinement of the lamellar spacing of pearlite, so ideal microstructures of promoting spheroidizing annealing were obtained.
