By means of TEM, hardness, conductivity, tensile strength test, fracture toughness test, polarization curve and EIS, the Al-Zn-Mg-Cu alloys treated by a new multi-stage aging system, i.e. pre-aging, over-aging and re-...By means of TEM, hardness, conductivity, tensile strength test, fracture toughness test, polarization curve and EIS, the Al-Zn-Mg-Cu alloys treated by a new multi-stage aging system, i.e. pre-aging, over-aging and re-aging (120°C/24h + 160°C/8h + 120°C/24h), were characterized. It is found that compared with the Al-Zn-Mg-Cu alloys treated by T76 (120°C/24h + 160°C/8h), the new multi-stage aging treatment can improve the tensile strength, fracture toughness, hardness and conductivity of the alloys at the same time. This is mainly due to the pre-aging, over-aging and re-aging process of super high strength aluminum alloys. Compared with the two-stage over aging process, the formation of multi-stage multi-phase precipitation structure can improve the strength, toughness and corrosion resistance of the alloys at the same time. The polarization curve is consistent with the conclusion. Therefore, we conducted this study to test how the comprehensive properties of the alloy can be improved.展开更多
Precipitation and recrystallization behavior of the re-aged Cu-Ag-Cr alloy were investigated. The precipitation occurring before the onset of recrystallization in the pre-aging process makes it possible to gain the ef...Precipitation and recrystallization behavior of the re-aged Cu-Ag-Cr alloy were investigated. The precipitation occurring before the onset of recrystallization in the pre-aging process makes it possible to gain the efficient hardening in re-aging process and the re-aging strengthening effect with pre-aging at 440℃ for 8h is the most remarkable. Pre-aging at 440℃ for 8h, consequent 60% deformation, and re-aging at 350400℃ can be close to optimal aging treatment. In the re-aging process combined with cold deformation in the studied Cu-Ag-Cr alloy, the in-situ recrystallization can be observed to occur, the precipitates are coarsened or dissolved in the front of grain boundaries following a re-precipitation in the recrystallization area.展开更多
The structure of RE-Ag alloy was observed and analyzed using electron probe. The property changes of the alloy containing two rare earth elements AgLaY during cold forming and the high temperature softening-resistance...The structure of RE-Ag alloy was observed and analyzed using electron probe. The property changes of the alloy containing two rare earth elements AgLaY during cold forming and the high temperature softening-resistance during annealing were studied using Vickers hardness tester. The distribution and action of the rare earth elements in Ag-alloy were also analyzed. Experimental results show that AgLaY alloy has more remarkable work-hardening effect than AgLa and pure silver, and it also has better thermal-resistance. The effects of RE elements, La and Y, on the properties of Ag-alloy are attributable to their symbiotic distribution and complementary function. Because of the common properties of La and Y as RE elements, they have the completely similar distribution in Ag-alloy. At the same time, La and Y make full use of complementary role in the alloy since they belong to different periods in periodic table and have differences in atomic structure and properties.展开更多
Heat-resistant aluminum alloys are widely used in aerospace and automotive fields for manufacturing hot components due to their advantages in lightweight design and energy conservation.However,the high-temperature str...Heat-resistant aluminum alloys are widely used in aerospace and automotive fields for manufacturing hot components due to their advantages in lightweight design and energy conservation.However,the high-temperature strength of existing cast aluminum alloys is always limited to about 100 MPa at 350℃due to coarsening and transformation of strengthening phases.Here,we reveal that the yield strength and ultimate tensile strength of the T6 state Al-8.4Cu-2.3Ce-1.0Mn-0.5Ni-0.2Zr alloy at 400◦C increase by 34%and 44%after re-aging at 300℃for 100 h,and its thermal strength exhibits distinguished ad-vantage over traditional heat-resistant aluminum alloys.The enhanced elevated-temperature strength is attributed to the reprecipitation of the Ni-bearing T-Al_(20)Cu_(2)Mn_(3)phase,whose number density increases over one time.The significant segregation of Ni,Ce,and Zr elements at the interfaces helps improve the thermal stability of the T phase.The thermostable T phase effectively strengthens the matrix by in-hibiting dislocation motion.Meanwhile,a highly interconnected 3D intermetallic network along the grain boundaries can still remain after long-term re-aging at 300℃,which is conducive to imposing a drag on the grain boundaries at high temperatures.This finding offers a viable route for enhancing the elevated-temperature strength of heat-resistant aluminum alloys,which could provide expanded opportunities for higher-temperature applications.展开更多
This article, by means of the ternary microscopic phase-field model, investigates the effects of re-ageing temperature on the precipitation of Ni75Al10Cr15 alloy with the help of atomic pictures, order parameters, par...This article, by means of the ternary microscopic phase-field model, investigates the effects of re-ageing temperature on the precipitation of Ni75Al10Cr15 alloy with the help of atomic pictures, order parameters, particle density, averaged radii, and volume fractions. During pre-ageing at 873 K, DO22 phases first appear through spinodal decomposition mechanism, and then L12 phases begin to form on the DO22 phase-boundaries through non-classical nucleation mechanism. In either of them, ordering process is obviously faster than atom clustering. At the late stage of re-ageing at 923 K, the elastic strain energy seems to exert stronger effects on microstructure, and DO22 and L12 phases exhibit directional alignment along 〈100〉 direction to a certain extent. When the temperature increases to 1 023 K, the influence of elastic strain energy begins to weaken, and the precipitated phases become randomly distributed in the matrix. The volume fraction of DO22 phase decreases to zero, whereas that of L12 phase first increases and then decreases with the temperature rising from 923 K to 1 123 K. On the whole, the effects of elastic strain energy make the coarsening behavior of both phases deviate from the time-law predictions by LSW diffusion-controlled growth theory.展开更多
In this work, the mechanical properties and electrical conductivity of the extruded 7136 aluminum alloy treated by single-stage aging treatment(T6), retrogression and re-aging treatment(RRA), and multiple retrogressio...In this work, the mechanical properties and electrical conductivity of the extruded 7136 aluminum alloy treated by single-stage aging treatment(T6), retrogression and re-aging treatment(RRA), and multiple retrogression and re-aging treatment have been investigated by means of hardness measurements, electrical conductivity tests and tensile tests. The results have shown that the properties of the 7136 alloy such as hardness, tensile strength and electrical conductivity were sensitive to retrogression time(within 90 min). With prolonging the retrogression time, the tensile strength was enhanced first and then decreased, yet the electrical conductivity was continuously increased. The 60 min-treated alloy performed the highest tensile strength(716 MPa), whereas the 90 min-treated alloy possessed the highest electrical conductivity(33.95%IACS). Compared with the T6-treated alloy, the tensile strength and electrical conductivity were improved by 3.3%and 18.9%, respectively. The electrical conductivity showed an obvious increase with repetitious times of the RRA treatment. After 3 RRA60 treatment, a good combination of tensile strength(705 MPa) and electrical conductivity(33.20%IACS) can be obtained. Compared with the T6 condition, the tensile strength and electrical conductivity were improved by 1.7% and 16.3%, respectively. The mechanism of microstructure evolution under different aging treatments has been discussed in detail.展开更多
文摘By means of TEM, hardness, conductivity, tensile strength test, fracture toughness test, polarization curve and EIS, the Al-Zn-Mg-Cu alloys treated by a new multi-stage aging system, i.e. pre-aging, over-aging and re-aging (120°C/24h + 160°C/8h + 120°C/24h), were characterized. It is found that compared with the Al-Zn-Mg-Cu alloys treated by T76 (120°C/24h + 160°C/8h), the new multi-stage aging treatment can improve the tensile strength, fracture toughness, hardness and conductivity of the alloys at the same time. This is mainly due to the pre-aging, over-aging and re-aging process of super high strength aluminum alloys. Compared with the two-stage over aging process, the formation of multi-stage multi-phase precipitation structure can improve the strength, toughness and corrosion resistance of the alloys at the same time. The polarization curve is consistent with the conclusion. Therefore, we conducted this study to test how the comprehensive properties of the alloy can be improved.
文摘Precipitation and recrystallization behavior of the re-aged Cu-Ag-Cr alloy were investigated. The precipitation occurring before the onset of recrystallization in the pre-aging process makes it possible to gain the efficient hardening in re-aging process and the re-aging strengthening effect with pre-aging at 440℃ for 8h is the most remarkable. Pre-aging at 440℃ for 8h, consequent 60% deformation, and re-aging at 350400℃ can be close to optimal aging treatment. In the re-aging process combined with cold deformation in the studied Cu-Ag-Cr alloy, the in-situ recrystallization can be observed to occur, the precipitates are coarsened or dissolved in the front of grain boundaries following a re-precipitation in the recrystallization area.
文摘The structure of RE-Ag alloy was observed and analyzed using electron probe. The property changes of the alloy containing two rare earth elements AgLaY during cold forming and the high temperature softening-resistance during annealing were studied using Vickers hardness tester. The distribution and action of the rare earth elements in Ag-alloy were also analyzed. Experimental results show that AgLaY alloy has more remarkable work-hardening effect than AgLa and pure silver, and it also has better thermal-resistance. The effects of RE elements, La and Y, on the properties of Ag-alloy are attributable to their symbiotic distribution and complementary function. Because of the common properties of La and Y as RE elements, they have the completely similar distribution in Ag-alloy. At the same time, La and Y make full use of complementary role in the alloy since they belong to different periods in periodic table and have differences in atomic structure and properties.
文摘Heat-resistant aluminum alloys are widely used in aerospace and automotive fields for manufacturing hot components due to their advantages in lightweight design and energy conservation.However,the high-temperature strength of existing cast aluminum alloys is always limited to about 100 MPa at 350℃due to coarsening and transformation of strengthening phases.Here,we reveal that the yield strength and ultimate tensile strength of the T6 state Al-8.4Cu-2.3Ce-1.0Mn-0.5Ni-0.2Zr alloy at 400◦C increase by 34%and 44%after re-aging at 300℃for 100 h,and its thermal strength exhibits distinguished ad-vantage over traditional heat-resistant aluminum alloys.The enhanced elevated-temperature strength is attributed to the reprecipitation of the Ni-bearing T-Al_(20)Cu_(2)Mn_(3)phase,whose number density increases over one time.The significant segregation of Ni,Ce,and Zr elements at the interfaces helps improve the thermal stability of the T phase.The thermostable T phase effectively strengthens the matrix by in-hibiting dislocation motion.Meanwhile,a highly interconnected 3D intermetallic network along the grain boundaries can still remain after long-term re-aging at 300℃,which is conducive to imposing a drag on the grain boundaries at high temperatures.This finding offers a viable route for enhancing the elevated-temperature strength of heat-resistant aluminum alloys,which could provide expanded opportunities for higher-temperature applications.
基金Foundation items: National Natural Science Foundation of China (50671084) China Postdoctoral Science Foundation Funded Project (20070420218)
文摘This article, by means of the ternary microscopic phase-field model, investigates the effects of re-ageing temperature on the precipitation of Ni75Al10Cr15 alloy with the help of atomic pictures, order parameters, particle density, averaged radii, and volume fractions. During pre-ageing at 873 K, DO22 phases first appear through spinodal decomposition mechanism, and then L12 phases begin to form on the DO22 phase-boundaries through non-classical nucleation mechanism. In either of them, ordering process is obviously faster than atom clustering. At the late stage of re-ageing at 923 K, the elastic strain energy seems to exert stronger effects on microstructure, and DO22 and L12 phases exhibit directional alignment along 〈100〉 direction to a certain extent. When the temperature increases to 1 023 K, the influence of elastic strain energy begins to weaken, and the precipitated phases become randomly distributed in the matrix. The volume fraction of DO22 phase decreases to zero, whereas that of L12 phase first increases and then decreases with the temperature rising from 923 K to 1 123 K. On the whole, the effects of elastic strain energy make the coarsening behavior of both phases deviate from the time-law predictions by LSW diffusion-controlled growth theory.
基金financially supported by National Key Research and Development Program of China (No.2016YFB0300901)。
文摘In this work, the mechanical properties and electrical conductivity of the extruded 7136 aluminum alloy treated by single-stage aging treatment(T6), retrogression and re-aging treatment(RRA), and multiple retrogression and re-aging treatment have been investigated by means of hardness measurements, electrical conductivity tests and tensile tests. The results have shown that the properties of the 7136 alloy such as hardness, tensile strength and electrical conductivity were sensitive to retrogression time(within 90 min). With prolonging the retrogression time, the tensile strength was enhanced first and then decreased, yet the electrical conductivity was continuously increased. The 60 min-treated alloy performed the highest tensile strength(716 MPa), whereas the 90 min-treated alloy possessed the highest electrical conductivity(33.95%IACS). Compared with the T6-treated alloy, the tensile strength and electrical conductivity were improved by 3.3%and 18.9%, respectively. The electrical conductivity showed an obvious increase with repetitious times of the RRA treatment. After 3 RRA60 treatment, a good combination of tensile strength(705 MPa) and electrical conductivity(33.20%IACS) can be obtained. Compared with the T6 condition, the tensile strength and electrical conductivity were improved by 1.7% and 16.3%, respectively. The mechanism of microstructure evolution under different aging treatments has been discussed in detail.