The introduction of nitrogen heteroatoms into carbon materials is a facile and efficient strategy to regulate their reactivities and facilitate their potential applications in energy conversion and storage. However,mo...The introduction of nitrogen heteroatoms into carbon materials is a facile and efficient strategy to regulate their reactivities and facilitate their potential applications in energy conversion and storage. However,most of nitrogen heteroatoms are doped into the bulk phase of carbon without site selectivity, which significantly reduces the contacts of feedstocks with the active dopants in a conductive scaffold. Herein we proposed the chemical vapor deposition of a nitrogen-doped graphene skin on the 3D porous graphene framework and donated the carbon/carbon composite as surface N-doped grapheme（SNG）. In contrast with routine N-doped graphene framework（NGF） with bulk distribution of N heteroatoms, the SNG renders a high surface N content of 1.81 at%, enhanced electrical conductivity of 31 S cm^（-1）, a large surface area of 1531 m^2 g^（-1）, a low defect density with a low I_D/I_G ratio of 1.55 calculated from Raman spectrum, and a high oxidation peak of 532.7 ℃ in oxygen atmosphere. The selective distribution of N heteroatoms on the surface of SNG affords the effective exposure of active sites at the interfaces of the electrode/electrolyte, so that more N heteroatoms are able to contact with oxygen feedstocks in oxygen reduction reaction or serve as polysulfide anchoring sites to retard the shuttle of polysulfides in a lithium–sulfur battery. This work opens a fresh viewpoint on the manipulation of active site distribution in a conductive scaffolds for multi-electron redox reaction based energy conversion and storage.展开更多
Metallic cobalt was deposited on acetylene black to synthesize a composite Co/C by chemical reduction method.A platinumfree electrocatalyst Co-N/C（800） for oxygen reduction reaction（ORR） was synthesized by mixing ...Metallic cobalt was deposited on acetylene black to synthesize a composite Co/C by chemical reduction method.A platinumfree electrocatalyst Co-N/C（800） for oxygen reduction reaction（ORR） was synthesized by mixing the composite Co/C with urea and heat-treating at 800℃.The results from linear sweep voltammograms indicated that the Co-N/C（800） is active to ORR.Theβ-Co and cobalt oxides are not the active site of the catalyst Co-N/C.However,the existence of cobalt facilitated the modification of nitrogen to carbon black and led to the formation of active site of catalyst Co-N/C（800）.展开更多
Understanding of the oxygen reduction reaction(ORR)mechanism for single atom catalysts is pivotal for the rational design of non-precious metal cathode materials and the commercialization of fuel cells.Herein,a series...Understanding of the oxygen reduction reaction(ORR)mechanism for single atom catalysts is pivotal for the rational design of non-precious metal cathode materials and the commercialization of fuel cells.Herein,a series of non-precious metal electrocatalysts based on nitrogen-doped bimetallic(Fe and Co)carbide were modeled by density functional theory calculations to predict the corresponding reaction pathways.The study elucidated prior oxygen adsorption on the Fe atom in the dual site and the modifier role of Co atoms to tune the electronic structures of Fe.The reaction activity was highly correlated with the bimetallic center and the coordination environment of the adjacent nitrogen.Interestingly,the preadsorption of*OH resulted in the apparent change of metal atoms'electronic states with the d-band center shifting toward the Fermi level,thereby boosting reaction activity.The result should help promote the fundamental understanding of active sites in ORR catalysts and provide an effective approach to the design of highly efficient ORR catalysts on an atomic scale.展开更多
开发经济高效的析氧反应电催化剂对于推进可充电金属-空气电池和电解水技术的发展至关重要.一般来说,具有完整蜂窝结构的石墨碳基面是电化学惰性的,需要依赖缺陷或者掺杂结构诱导的电荷极化效应来提升催化活性.相比于基面,边缘位点具有...开发经济高效的析氧反应电催化剂对于推进可充电金属-空气电池和电解水技术的发展至关重要.一般来说,具有完整蜂窝结构的石墨碳基面是电化学惰性的,需要依赖缺陷或者掺杂结构诱导的电荷极化效应来提升催化活性.相比于基面,边缘位点具有特殊的局域电子态,为提升石墨碳电极的本征催化活性开辟了新的思路,然而其结构精准构筑目前仍面临极大挑战.本文以“人字形”多壁碳纳米管(H-MWCNTs)作为研究切入点,利用高温熔盐介质主导的插层剥离和截断效应,实现“边缘-平面位点”结构可控构筑,为实现高效电解水析氧反应(OER)提供了重要的结构基础.通过熔盐辅助热解方法可控制备了具有完全暴露的内外边缘平面的目标催化剂H-MWCNTs-MS,并研究其OER催化性能.在碱性介质中10 mA cm^(-2)电流密度所需过电位仅为236 mV,是目前报道的较好的非金属电催化剂.同时,H-MWCNTs-MS在10,50和100 mA cm^(-2)电流密度下均表现出较好的电化学稳定性.利用原位衰减全反射-表面增强红外吸收光谱(ATR-SEIRAS)技术研究了“边缘-平面位点”在OER过程中的结构重构过程,与理论计算分析的高能“边缘态”结果一致,并确定酮氧官能化位点为真实催化活性中心.理论计算结果表明,氧官能团修饰结构能够显著促进电荷的再分配,增强层间耦合作用,降低关键含氧中间体*OOH的形成能垒,加速OER反应动力学.此外,H-MWCNTs-MS的开放式结构极大程度提高了“边缘-平面位点”的利用率,减小的纳米管壁厚促进了层间电荷迁移,也是增强OER活性的关键要素.综上,精准构筑“边缘-平面位点”为开发高效石墨碳电极开辟了新的思路,通过原位谱学技术揭示边缘位点催化结构重构,能够进一步丰富研究者对于电催化协同效应的科学认识.展开更多
基金supported by the National Key Research and Development Program(2016YFA0202500 and 2016YFA0200102)the Natural Scientific Foundation of China(21776019)
文摘The introduction of nitrogen heteroatoms into carbon materials is a facile and efficient strategy to regulate their reactivities and facilitate their potential applications in energy conversion and storage. However,most of nitrogen heteroatoms are doped into the bulk phase of carbon without site selectivity, which significantly reduces the contacts of feedstocks with the active dopants in a conductive scaffold. Herein we proposed the chemical vapor deposition of a nitrogen-doped graphene skin on the 3D porous graphene framework and donated the carbon/carbon composite as surface N-doped grapheme（SNG）. In contrast with routine N-doped graphene framework（NGF） with bulk distribution of N heteroatoms, the SNG renders a high surface N content of 1.81 at%, enhanced electrical conductivity of 31 S cm^（-1）, a large surface area of 1531 m^2 g^（-1）, a low defect density with a low I_D/I_G ratio of 1.55 calculated from Raman spectrum, and a high oxidation peak of 532.7 ℃ in oxygen atmosphere. The selective distribution of N heteroatoms on the surface of SNG affords the effective exposure of active sites at the interfaces of the electrode/electrolyte, so that more N heteroatoms are able to contact with oxygen feedstocks in oxygen reduction reaction or serve as polysulfide anchoring sites to retard the shuttle of polysulfides in a lithium–sulfur battery. This work opens a fresh viewpoint on the manipulation of active site distribution in a conductive scaffolds for multi-electron redox reaction based energy conversion and storage.
基金funded by the Third Stage Training of"211 Project"(No.S-09103) of ChinaNatural Science Foundation Project of Chongqing(No.CSTC2009BB6213)
文摘Metallic cobalt was deposited on acetylene black to synthesize a composite Co/C by chemical reduction method.A platinumfree electrocatalyst Co-N/C（800） for oxygen reduction reaction（ORR） was synthesized by mixing the composite Co/C with urea and heat-treating at 800℃.The results from linear sweep voltammograms indicated that the Co-N/C（800） is active to ORR.Theβ-Co and cobalt oxides are not the active site of the catalyst Co-N/C.However,the existence of cobalt facilitated the modification of nitrogen to carbon black and led to the formation of active site of catalyst Co-N/C（800）.
基金the Joint Fund of the National Natural Science Foundation of China(U1732267).
文摘Understanding of the oxygen reduction reaction(ORR)mechanism for single atom catalysts is pivotal for the rational design of non-precious metal cathode materials and the commercialization of fuel cells.Herein,a series of non-precious metal electrocatalysts based on nitrogen-doped bimetallic(Fe and Co)carbide were modeled by density functional theory calculations to predict the corresponding reaction pathways.The study elucidated prior oxygen adsorption on the Fe atom in the dual site and the modifier role of Co atoms to tune the electronic structures of Fe.The reaction activity was highly correlated with the bimetallic center and the coordination environment of the adjacent nitrogen.Interestingly,the preadsorption of*OH resulted in the apparent change of metal atoms'electronic states with the d-band center shifting toward the Fermi level,thereby boosting reaction activity.The result should help promote the fundamental understanding of active sites in ORR catalysts and provide an effective approach to the design of highly efficient ORR catalysts on an atomic scale.
文摘开发经济高效的析氧反应电催化剂对于推进可充电金属-空气电池和电解水技术的发展至关重要.一般来说,具有完整蜂窝结构的石墨碳基面是电化学惰性的,需要依赖缺陷或者掺杂结构诱导的电荷极化效应来提升催化活性.相比于基面,边缘位点具有特殊的局域电子态,为提升石墨碳电极的本征催化活性开辟了新的思路,然而其结构精准构筑目前仍面临极大挑战.本文以“人字形”多壁碳纳米管(H-MWCNTs)作为研究切入点,利用高温熔盐介质主导的插层剥离和截断效应,实现“边缘-平面位点”结构可控构筑,为实现高效电解水析氧反应(OER)提供了重要的结构基础.通过熔盐辅助热解方法可控制备了具有完全暴露的内外边缘平面的目标催化剂H-MWCNTs-MS,并研究其OER催化性能.在碱性介质中10 mA cm^(-2)电流密度所需过电位仅为236 mV,是目前报道的较好的非金属电催化剂.同时,H-MWCNTs-MS在10,50和100 mA cm^(-2)电流密度下均表现出较好的电化学稳定性.利用原位衰减全反射-表面增强红外吸收光谱(ATR-SEIRAS)技术研究了“边缘-平面位点”在OER过程中的结构重构过程,与理论计算分析的高能“边缘态”结果一致,并确定酮氧官能化位点为真实催化活性中心.理论计算结果表明,氧官能团修饰结构能够显著促进电荷的再分配,增强层间耦合作用,降低关键含氧中间体*OOH的形成能垒,加速OER反应动力学.此外,H-MWCNTs-MS的开放式结构极大程度提高了“边缘-平面位点”的利用率,减小的纳米管壁厚促进了层间电荷迁移,也是增强OER活性的关键要素.综上,精准构筑“边缘-平面位点”为开发高效石墨碳电极开辟了新的思路,通过原位谱学技术揭示边缘位点催化结构重构,能够进一步丰富研究者对于电催化协同效应的科学认识.
