Half-wavelength transmission can transmit large-scale renewable energy over very long distances.This paper proposes an improved steady-state voltage-control method for half-wavelength transmission systems considering ...Half-wavelength transmission can transmit large-scale renewable energy over very long distances.This paper proposes an improved steady-state voltage-control method for half-wavelength transmission systems considering largescale wind-power transmission.First,the unique voltage characteristics of half-wavelength lines are deduced based on the distributed parameter model.In the secondary voltage-control level,reactive power-transmission limits of half-wavelength lines are introduced as another control objective except for tracing the pilot bus voltage reference.Considering the uncertainty and fluctuation of wind power,the overvoltage risk-assessment method of half-wavelength lines is presented to determine specific voltage-control strategies.Simulation results demonstrate that the proposed voltage-control method delivers superior tracking performance according to a voltage reference value and prevents the overvoltage risk of halfwavelength lines effectively in different wind-power penetrations.展开更多
In order to play a positive role of decentralised wind power on-grid for voltage stability improvement and loss reduction of distribution network,a multi-objective two-stage decentralised wind power planning method is...In order to play a positive role of decentralised wind power on-grid for voltage stability improvement and loss reduction of distribution network,a multi-objective two-stage decentralised wind power planning method is proposed in the paper,which takes into account the network loss correction for the extreme cold region.Firstly,an electro-thermal model is introduced to reflect the effect of temperature on conductor resistance and to correct the results of active network loss calculation;secondly,a two-stage multi-objective two-stage decentralised wind power siting and capacity allocation and reactive voltage optimisation control model is constructed to take account of the network loss correction,and the multi-objective multi-planning model is established in the first stage to consider the whole-life cycle investment cost of WTGs,the system operating cost and the voltage quality of power supply,and the multi-objective planning model is established in the second stage.planning model,and the second stage further develops the reactive voltage control strategy of WTGs on this basis,and obtains the distribution network loss reduction method based on WTG siting and capacity allocation and reactive power control strategy.Finally,the optimal configuration scheme is solved by the manta ray foraging optimisation(MRFO)algorithm,and the loss of each branch line and bus loss of the distribution network before and after the adoption of this loss reduction method is calculated by taking the IEEE33 distribution system as an example,which verifies the practicability and validity of the proposed method,and provides a reference introduction for decision-making for the distributed energy planning of the distribution network.展开更多
Due to the fact that a high share of renewable energy sources(RESs)are connected to high-voltage direct current(HVDC)sending-end AC power systems,the voltage and frequency regulation capabilities of HVDC sending-end A...Due to the fact that a high share of renewable energy sources(RESs)are connected to high-voltage direct current(HVDC)sending-end AC power systems,the voltage and frequency regulation capabilities of HVDC sending-end AC power systems have diminished.This has resulted in potential system operating problems such as overvoltage and overfrequency,which occur simultaneously when block faults exist in the HVDC link.In this study,a steady-state voltage security-constrained optimal frequency control method for weak HVDC sending-end AC power systems is proposed.The integrated virtual inertia control of RESs is employed for system frequency regulation.Additional dynamic reactive power compensation devices are utilized to control the voltage of all nodes meet voltage security constraints.Then,an optimization model that simultaneously considers the frequency and steady-state voltage security constraints for weak HVDC sending-end AC power systems is established.The optimal control scheme with the minimum total cost of generation tripping and additional dynamic reactive power compensation required is obtained through the optimization solution.Simulations are conducted on a modified IEEE 9-bus test system and practical Qing-Yu line commutated converter based HVDC(LCC-HVDC)sending-end AC power system to verify the effectiveness of the proposed method.展开更多
Voltage sags in power system may lead to serious problems such as the off-grid of distributed generation and electrical equipment failures.As a novel type of power electronic equipment,a flexible multi-state switch(FM...Voltage sags in power system may lead to serious problems such as the off-grid of distributed generation and electrical equipment failures.As a novel type of power electronic equipment,a flexible multi-state switch(FMSS)is capable to support the voltage during the grid faults.In this paper,a voltage control strategy to support the voltage in a distribution network is proposed by introducing three-port FMSS.The positive-negative-sequence compensation(PNSC)scheme is adopted to control the active and reactive current.This control scheme eliminates active power oscillations at the port of voltage sags and reduces coupling oscillations of other ports.Based on the characteristics of the voltage support under PNSC scheme,two voltage support strategies are proposed.A proportional-integral controller is introduced to provide the reactive power references,which eliminates the errors when estimating the grid voltage and impedance.A current limiting scheme is adopted to keep the port current in a safe range by adjusting the active and reactive power references.The voltage support strategies in two different voltage sags are simulated,and results show the feasibility and effectiveness of the proposed control strategies.展开更多
This article investigates the power quality enhancement in power system using one of the most famous series converter based FACTS controller like IPFC (Interline Power Flow Controller) in Power Injection Model (PIM). ...This article investigates the power quality enhancement in power system using one of the most famous series converter based FACTS controller like IPFC (Interline Power Flow Controller) in Power Injection Model (PIM). The parameters of PIM are derived with help of the Newton-Raphson power flow algorithm. In general, a sample test power system without FACTs devices has generated more reactive power, decreased real power, more harmonics, small power factor and poor dynamic performance under line and load variations. In order to improve the real power, compensating the reactive power, proficient power factor and excellent load voltage regulation in the sample test power system, an IPFC is designed. The D-Q technique is utilized here to derive the reference current of the converter and its D.C link capacitor voltage is regulated. Also, the reference voltage of the inverter is arrived by park transformation technique and its load voltage is controlled. Here, a sample 230 KV test power system is taken for study. Further as the conventional PI controllers are designed at one nominal operating point they are not competent to respond satisfactorily in dynamic operating conditions. This can be circumvented by a Fuzzy and Neural network based IPFC and its detailed Simulink model is developed using MATLAB and the overall performance analysis is carried out under different operating state of affairs.展开更多
The on-line coordinated control strategy among multi-voltage controls is important to keep voltage security in post-fault systems. Based on the wide area measuring information, the energy function, which can qualify t...The on-line coordinated control strategy among multi-voltage controls is important to keep voltage security in post-fault systems. Based on the wide area measuring information, the energy function, which can qualify the impacts of the different control actions on voltage of different nodes, is proposed. And then, considering the impacts of different control actions on the node voltage being treated as a weight matrix, the energy margin is used as the objective function and the reactive power margin is innovatively used as the constraint to regulate the control actions globally according to the weight values. At last, the objective functions are solved to get the optimal global coordinated control strategies. The proposed method is identified in an IEEE-30 Bus system and the simulation results show that it effectively improves the voltage stability.展开更多
为实现西北电网高比例新能源地区的无功优化控制,提出了一种高压直流换流站集中式调相机参与电网自动电压控制(automatic voltage control,AVC)的综合协调控制策略。首先分析了AVC的总体控制思路,按“软分区”思想构造了三级电压控制模...为实现西北电网高比例新能源地区的无功优化控制,提出了一种高压直流换流站集中式调相机参与电网自动电压控制(automatic voltage control,AVC)的综合协调控制策略。首先分析了AVC的总体控制思路,按“软分区”思想构造了三级电压控制模式。针对西北电网和青海电网实际,在网省系统之间建立协调控制变量,结合最优潮流模型,形成了柴达木调相机参与AVC的综合协调控制策略。通过柴达木调相机AVC联调试验时偶遇的电网大扰动实例,验证了控制策略的良好适用性。所提出的AVC控制策略,可使调相机在电网稳态时发挥无功源作用,电网故障时提供瞬时强无功支撑,充分利用新一代调相机性能,提高电网无功电压调节水平。展开更多
自动电压控制(Automatic Voltage Control,AVC)系统是一种基于高级控制技术的电力自动化系统,具有智能化、自适应、快速响应等特点,被广泛用于电网调度和监控。随着电力供需规模不断扩大,电网运行环境越来越复杂,要求电力系统具备更强...自动电压控制(Automatic Voltage Control,AVC)系统是一种基于高级控制技术的电力自动化系统,具有智能化、自适应、快速响应等特点,被广泛用于电网调度和监控。随着电力供需规模不断扩大,电网运行环境越来越复杂,要求电力系统具备更强的自动化、智能化以及可靠性。深入探究AVC系统在电力调度监控工作中的应用,为电力系统研究人员和从业人员提供参考和借鉴。同时,也希望能够为AVC系统的推广应用提供一定的帮助和指导。展开更多
在可再生能源与火力发电耦合系统中,风电出力波动和远端故障扰动都会引起系统电压越限。文章在考虑通信延时的基础上,以耦合系统各节点电压偏差为量化指标,分析了耦合系统无功控制对电压稳定性的影响,提出了一种以静止无功发生器(Static...在可再生能源与火力发电耦合系统中,风电出力波动和远端故障扰动都会引起系统电压越限。文章在考虑通信延时的基础上,以耦合系统各节点电压偏差为量化指标,分析了耦合系统无功控制对电压稳定性的影响,提出了一种以静止无功发生器(Static Var Generator,SVG)和风电机组作为无功调节资源的耦合系统双层无功控制优化策略。该策略上层为SVG无功调节设备,以耦合系统各节点电压偏差综合最小为目标,构建了系统整体功率因数优化模型。下层针对电压偏差大的节点,利用节点附近的风电机组为无功调节设备,以系统电压偏差和网损综合最优为目标,构建了风电机组无功优化模型,采用Ybus与LinWPSO相结合的算法求解优化模型,并得出风电机组无功参考值。案例仿真结果表明,文章所提的双层无功控制策略可充分发挥风电机组无功调节潜力,兼顾到耦合系统的电压波动和网损,减少可再生能源功率波动对耦合系统的扰动,提高了耦合系统的电压稳定性。展开更多
基金supported by State Grid Corporation of China,Projects under Grant 520626200031National Natural Science Foundation of China,No.51877200。
文摘Half-wavelength transmission can transmit large-scale renewable energy over very long distances.This paper proposes an improved steady-state voltage-control method for half-wavelength transmission systems considering largescale wind-power transmission.First,the unique voltage characteristics of half-wavelength lines are deduced based on the distributed parameter model.In the secondary voltage-control level,reactive power-transmission limits of half-wavelength lines are introduced as another control objective except for tracing the pilot bus voltage reference.Considering the uncertainty and fluctuation of wind power,the overvoltage risk-assessment method of half-wavelength lines is presented to determine specific voltage-control strategies.Simulation results demonstrate that the proposed voltage-control method delivers superior tracking performance according to a voltage reference value and prevents the overvoltage risk of halfwavelength lines effectively in different wind-power penetrations.
基金supported by the National Natural Science Foundation of China(52177081).
文摘In order to play a positive role of decentralised wind power on-grid for voltage stability improvement and loss reduction of distribution network,a multi-objective two-stage decentralised wind power planning method is proposed in the paper,which takes into account the network loss correction for the extreme cold region.Firstly,an electro-thermal model is introduced to reflect the effect of temperature on conductor resistance and to correct the results of active network loss calculation;secondly,a two-stage multi-objective two-stage decentralised wind power siting and capacity allocation and reactive voltage optimisation control model is constructed to take account of the network loss correction,and the multi-objective multi-planning model is established in the first stage to consider the whole-life cycle investment cost of WTGs,the system operating cost and the voltage quality of power supply,and the multi-objective planning model is established in the second stage.planning model,and the second stage further develops the reactive voltage control strategy of WTGs on this basis,and obtains the distribution network loss reduction method based on WTG siting and capacity allocation and reactive power control strategy.Finally,the optimal configuration scheme is solved by the manta ray foraging optimisation(MRFO)algorithm,and the loss of each branch line and bus loss of the distribution network before and after the adoption of this loss reduction method is calculated by taking the IEEE33 distribution system as an example,which verifies the practicability and validity of the proposed method,and provides a reference introduction for decision-making for the distributed energy planning of the distribution network.
基金supported in part by the National Key R&D Program of China(No.2022YFB2402700)the Science and Technology Project of State Grid Corporation of China(No.52272222001J).
文摘Due to the fact that a high share of renewable energy sources(RESs)are connected to high-voltage direct current(HVDC)sending-end AC power systems,the voltage and frequency regulation capabilities of HVDC sending-end AC power systems have diminished.This has resulted in potential system operating problems such as overvoltage and overfrequency,which occur simultaneously when block faults exist in the HVDC link.In this study,a steady-state voltage security-constrained optimal frequency control method for weak HVDC sending-end AC power systems is proposed.The integrated virtual inertia control of RESs is employed for system frequency regulation.Additional dynamic reactive power compensation devices are utilized to control the voltage of all nodes meet voltage security constraints.Then,an optimization model that simultaneously considers the frequency and steady-state voltage security constraints for weak HVDC sending-end AC power systems is established.The optimal control scheme with the minimum total cost of generation tripping and additional dynamic reactive power compensation required is obtained through the optimization solution.Simulations are conducted on a modified IEEE 9-bus test system and practical Qing-Yu line commutated converter based HVDC(LCC-HVDC)sending-end AC power system to verify the effectiveness of the proposed method.
基金This work was supported by the National Key R&D Program of China(No.2017YFB0903100)Science and Technology Projects of State Grid Corporation of China(No.521104170043).
文摘Voltage sags in power system may lead to serious problems such as the off-grid of distributed generation and electrical equipment failures.As a novel type of power electronic equipment,a flexible multi-state switch(FMSS)is capable to support the voltage during the grid faults.In this paper,a voltage control strategy to support the voltage in a distribution network is proposed by introducing three-port FMSS.The positive-negative-sequence compensation(PNSC)scheme is adopted to control the active and reactive current.This control scheme eliminates active power oscillations at the port of voltage sags and reduces coupling oscillations of other ports.Based on the characteristics of the voltage support under PNSC scheme,two voltage support strategies are proposed.A proportional-integral controller is introduced to provide the reactive power references,which eliminates the errors when estimating the grid voltage and impedance.A current limiting scheme is adopted to keep the port current in a safe range by adjusting the active and reactive power references.The voltage support strategies in two different voltage sags are simulated,and results show the feasibility and effectiveness of the proposed control strategies.
文摘This article investigates the power quality enhancement in power system using one of the most famous series converter based FACTS controller like IPFC (Interline Power Flow Controller) in Power Injection Model (PIM). The parameters of PIM are derived with help of the Newton-Raphson power flow algorithm. In general, a sample test power system without FACTs devices has generated more reactive power, decreased real power, more harmonics, small power factor and poor dynamic performance under line and load variations. In order to improve the real power, compensating the reactive power, proficient power factor and excellent load voltage regulation in the sample test power system, an IPFC is designed. The D-Q technique is utilized here to derive the reference current of the converter and its D.C link capacitor voltage is regulated. Also, the reference voltage of the inverter is arrived by park transformation technique and its load voltage is controlled. Here, a sample 230 KV test power system is taken for study. Further as the conventional PI controllers are designed at one nominal operating point they are not competent to respond satisfactorily in dynamic operating conditions. This can be circumvented by a Fuzzy and Neural network based IPFC and its detailed Simulink model is developed using MATLAB and the overall performance analysis is carried out under different operating state of affairs.
基金supported by the National Natural Science Foundation of China under Grant No.51007006the Fundamental Research Funds for the Central Universities under Grant No.ZYGX2012J159
文摘The on-line coordinated control strategy among multi-voltage controls is important to keep voltage security in post-fault systems. Based on the wide area measuring information, the energy function, which can qualify the impacts of the different control actions on voltage of different nodes, is proposed. And then, considering the impacts of different control actions on the node voltage being treated as a weight matrix, the energy margin is used as the objective function and the reactive power margin is innovatively used as the constraint to regulate the control actions globally according to the weight values. At last, the objective functions are solved to get the optimal global coordinated control strategies. The proposed method is identified in an IEEE-30 Bus system and the simulation results show that it effectively improves the voltage stability.
文摘为实现西北电网高比例新能源地区的无功优化控制,提出了一种高压直流换流站集中式调相机参与电网自动电压控制(automatic voltage control,AVC)的综合协调控制策略。首先分析了AVC的总体控制思路,按“软分区”思想构造了三级电压控制模式。针对西北电网和青海电网实际,在网省系统之间建立协调控制变量,结合最优潮流模型,形成了柴达木调相机参与AVC的综合协调控制策略。通过柴达木调相机AVC联调试验时偶遇的电网大扰动实例,验证了控制策略的良好适用性。所提出的AVC控制策略,可使调相机在电网稳态时发挥无功源作用,电网故障时提供瞬时强无功支撑,充分利用新一代调相机性能,提高电网无功电压调节水平。
文摘自动电压控制(Automatic Voltage Control,AVC)系统是一种基于高级控制技术的电力自动化系统,具有智能化、自适应、快速响应等特点,被广泛用于电网调度和监控。随着电力供需规模不断扩大,电网运行环境越来越复杂,要求电力系统具备更强的自动化、智能化以及可靠性。深入探究AVC系统在电力调度监控工作中的应用,为电力系统研究人员和从业人员提供参考和借鉴。同时,也希望能够为AVC系统的推广应用提供一定的帮助和指导。
文摘在可再生能源与火力发电耦合系统中,风电出力波动和远端故障扰动都会引起系统电压越限。文章在考虑通信延时的基础上,以耦合系统各节点电压偏差为量化指标,分析了耦合系统无功控制对电压稳定性的影响,提出了一种以静止无功发生器(Static Var Generator,SVG)和风电机组作为无功调节资源的耦合系统双层无功控制优化策略。该策略上层为SVG无功调节设备,以耦合系统各节点电压偏差综合最小为目标,构建了系统整体功率因数优化模型。下层针对电压偏差大的节点,利用节点附近的风电机组为无功调节设备,以系统电压偏差和网损综合最优为目标,构建了风电机组无功优化模型,采用Ybus与LinWPSO相结合的算法求解优化模型,并得出风电机组无功参考值。案例仿真结果表明,文章所提的双层无功控制策略可充分发挥风电机组无功调节潜力,兼顾到耦合系统的电压波动和网损,减少可再生能源功率波动对耦合系统的扰动,提高了耦合系统的电压稳定性。