A Real-time Lithological Identification Method based on SMOTE-Tomek and ICSA Optimization

In petroleum engineering,real-time lithology identification is very important for reservoir evaluation,drilling decisions and petroleum geological exploration.A lithology identification method while drilling based on machine learning and mud logging data is studied in this paper.This method can effectively utilize downhole parameters collected in real-time during drilling,to identify lithology in real-time and provide a reference for optimization of drilling parameters.Given the imbalance of lithology samples,the synthetic minority over-sampling technique(SMOTE)and Tomek link were used to balance the sample number of five lithologies.Meanwhile,this paper introduces Tent map,random opposition-based learning and dynamic perceived probability to the original crow search algorithm(CSA),and establishes an improved crow search algorithm(ICSA).In this paper,ICSA is used to optimize the hyperparameter combination of random forest(RF),extremely random trees(ET),extreme gradient boosting(XGB),and light gradient boosting machine(LGBM)models.In addition,this study combines the recognition advantages of the four models.The accuracy of lithology identification by the weighted average probability model reaches 0.877.The study of this paper realizes high-precision real-time lithology identification method,which can provide lithology reference for the drilling process.

Intelligent identification and real-time warning method of diverse complex events in horizontal well fracturing

The existing approaches for identifying events in horizontal well fracturing are difficult, time-consuming, inaccurate, and incapable of real-time warning. Through improvement of data analysis and deep learning algorithm, together with the analysis on data and information of horizontal well fracturing in shale gas reservoirs, this paper presents a method for intelligent identification and real-time warning of diverse complex events in horizontal well fracturing. An identification model for "point" events in fracturing is established based on the Att-BiLSTM neural network, along with the broad learning system (BLS) and the BP neural network, and it realizes the intelligent identification of the start/end of fracturing, formation breakdown, instantaneous shut-in, and other events, with an accuracy of over 97%. An identification model for "phase" events in fracturing is established based on enhanced Unet++ network, and it realizes the intelligent identification of pump ball, pre-acid treatment, temporary plugging fracturing, sand plugging, and other events, with an error of less than 0.002. Moreover, a real-time prediction model for fracturing pressure is built based on the Att-BiLSTM neural network, and it realizes the real-time warning of diverse events in fracturing. The proposed method can provide an intelligent, efficient and accurate identification of events in fracturing to support the decision-making.

Intelligent risk identification of gas drilling based on nonlinear classification network

During the transient process of gas drilling conditions,the monitoring data often has obvious nonlinear fluctuation features,which leads to large classification errors and time delays in the commonly used intelligent classification models.Combined with the structural features of data samples obtained from monitoring while drilling,this paper uses convolution algorithm to extract the correlation features of multiple monitoring while drilling parameters changing with time,and applies RBF network with nonlinear classification ability to classify the features.In the training process,the loss function component based on distance mean square error is used to effectively adjust the best clustering center in RBF.Many field applications show that,the recognition accuracy of the above nonlinear classification network model for gas production,water production and drill sticking is 97.32%,95.25%and 93.78%.Compared with the traditional convolutional neural network(CNN)model,the network structure not only improves the classification accuracy of conditions in the transition stage of conditions,but also greatly advances the time points of risk identification,especially for the three common risk identification points of gas production,water production and drill sticking,which are advanced by 56,16 and 8 s.It has won valuable time for the site to take correct risk disposal measures in time,and fully demonstrated the applicability of nonlinear classification neural network in oil and gas field exploration and development.

A Study on the Classification and Well-Logging Identification of Eclogite in the Main Hole of Chinese Continental Scientific Drilling Project

Eclogite, one of the important lithologies in the main hole of the Chinese Continental Scientific Drilling （CCSD） Project, exists above the depth of 3 245 m and has distinctive responses of gamma-ray, compensating density and neutron well-logging, and so on. In this study, according to the diversities of minerals and chemical components and well-logging responses, edogites are classified from three aspects of origin, content of oxygen, and sub-mineral. We studied the logging identification method for eclogite sub-classes based on multi-element statistics and reconstructed 11 kinds of eclogite. As a result, eclogites can be divided into 6 types using well logs. In the light of this recognition, the eclogite in the main hole is divided into 20 sections, and the distribution characters of all sub-classes of eclogite are analyzed, which will provide important data for geological research of CCSD.

Identification and Quantitation of Cashmere (Pashmina) Fiber and Wool Using Novel Microchip Based Real-Time PCR Technology

The textile industrial chain all over the world is facing a challenge of differentiating cashmere fiber from mixture of wool and other fibers in case cashmere stocks are adulterated with wool or other fibers. For identification of cashmere in such mixtures, the development of microchip based real-time PCR technology offers a very sensitive, specific, and accurate solution. The technology has been validated with cashmere and wool samples procured from distant farms, and from cashmere goats and sheep of different age and sex. Model samples with incremental raw cashmere or wool content were tested. The experimentally determined content was found to be comparable to the weighed content of the respective fibers in the samples. This technology may prove a cost cutter since it needs only 1.2 μl of the PCR reagent mix. It is substantially faster than traditional real-time PCR systems for being carried as miniature reaction volume in metal microchip. These features allow faster thermal equilibrium and thermal uniformity over the entire array of microreactors. For routine tests or in commercial set up, the microchips are available as ready-to-run with lyophilized reagents in its microreactors to which only 1 μl of the 10-fold diluted isolated DNA sample is added. The lyophilized microchips offer user-friendly handling in testing laboratories and help minimize human error.

Applications of Hyperspectral Remote Sensing in Ground Object Identification and Classification

Hyperspectral remote sensing has become one of the research frontiers in ground object identification and classification. On the basis of reviewing the application of hyperspectral remote sensing in identification and classification of ground objects at home and abroad. The research results of identification and classification of forest tree species, grassland and urban land features were summarized. Then the researches of classification methods were summarized. Finally the prospects of hyperspectral remote sensing in ground object identification and classification were prospected.

Real-Time Multi-Class Infection Classification for Respiratory Diseases

Real-time disease prediction has emerged as the main focus of study in the field of computerized medicine.Intelligent disease identification framework can assist medical practitioners in diagnosing disease in a way that is reliable,consistent,and timely,successfully lowering mortality rates,particularly during endemics and pandemics.To prevent this pandemic’s rapid and widespread,it is vital to quickly identify,confine,and treat affected individuals.The need for auxiliary computer-aided diagnostic(CAD)systems has grown.Numerous recent studies have indicated that radiological pictures contained critical information regarding the COVID-19 virus.Utilizing advanced convolutional neural network(CNN)architectures in conjunction with radiological imaging makes it possible to provide rapid,accurate,and extremely useful susceptible classifications.This research work proposes a methodology for real-time detection of COVID-19 infections caused by the Corona Virus.The purpose of this study is to offer a two-way COVID-19(2WCD)diagnosis prediction deep learning system that is built on Transfer Learning Methodologies(TLM)and features customized fine-tuning on top of fully connected layered pre-trained CNN architectures.2WCD has applied modifications to pre-trained models for better performance.It is designed and implemented to improve the generalization ability of the classifier for binary and multi-class models.Along with the ability to differentiate COVID-19 and No-Patient in the binary class model and COVID-19,No-Patient,and Pneumonia in the multi-class model,our framework is augmented with a critical add-on for visually demonstrating infection in any tested radiological image by highlighting the affected region in the patient’s lung in a recognizable color pattern.The proposed system is shown to be extremely robust and reliable for real-time COVID-19 diagnostic prediction.It can also be used to forecast other lung-related disorders.As the system can assist medical practitioners in diagnosing the greatest number of patients in the shortestamount of time, radiologists can also be used or published online to assistany less-experienced individual in obtaining an accurate immediate screeningfor their radiological images.

Classification and Identification of indica P/TGMS Lines in China

Despite extensive studies on cultivated rice, the population structure and genetic diversity of the indica photoperiod-and thermo-sensitive genic male sterility(P/TGMS) lines in China remains unclear. Using 48 simple sequence repeat(SSR) markers, we genotyped a panel of 208 indica P/TGMS lines and confirmed three subgroups, named indica-I, indica-II and indica-III, in indica P/TGMS lines. Further diversity analysis indicated indica-II had the highest genetic diversity. The genetic differentiation between indica-II and indica-III was demonstrated as the largest among the three subgroups. Moreover, indica/japonica component identification was detected that five P/TGMS lines possess indica components less than 0.900. These results improve our knowledge on the genetic background for P/TGMS lines in China and will be beneficial for hybrid rice breeding programs.

Identification of syrup type using fourier transform-near infrared spectroscopy with multivariate classification methods

This research aimed to establish near infrared(NIR)spectroscopy models for identification ofsyrup types in which the maple syrup was discriminated from other syrup types.Thirty syruptypes were used in this research;the NIR spectra of each type were recorded with 10 replicates.The repeatability and reproducibility of NIR scamning were perfomed,and the absorbance atG940cn-1 was used for calculation,.Principal component analysis was used to group the syruptype.Identification models were developed by soft independent modeling by,class analogy(SIMCA)and partial least-squares diseriminant analysis(PLS.DA),The SiMCA models of alsyrup types exhibited accuracy percentage of 93.3-100%for identifying syrup types,whereasmaple syrup discrimination models showed percentage of accuracy between 83.2%and 100%.The PLS-DA technique gave the accuracy of syrup types classification bet ween 96.6%and 100%and presented ability on discrimination of maple syrup form other types of syrup with accuracyof 100%.The finding presented the potential of NIR spectroscopy for the syrup typeidentification.

Microseismic event waveform classification using CNN-based transfer learning models

The efficient processing of large amounts of data collected by the microseismic monitoring system(MMS),especially the rapid identification of microseismic events in explosions and noise,is essential for mine disaster prevention.Currently,this work is primarily performed by skilled technicians,which results in severe workloads and inefficiency.In this paper,CNN-based transfer learning combined with computer vision technology was used to achieve automatic recognition and classification of multichannel microseismic signal waveforms.First,data collected by MMS was generated into 6-channel original waveforms based on events.After that,sample data sets of microseismic events,blasts,drillings,and noises were established through manual identification.These datasets were split into training sets and test sets according to a certain proportion,and transfer learning was performed on AlexNet,GoogLeNet,and ResNet50 pre-training network models,respectively.After training and tuning,optimal models were retained and compared with support vector machine classification.Results show that transfer learning models perform well on different test sets.Overall,GoogLeNet performed best,with a recognition accuracy of 99.8%.Finally,the possible effects of the number of training sets and the imbalance of different types of sample data on the accuracy and effectiveness of classification models were discussed.

Deep learning-based LPI radar signals analysis and identification using a Nyquist Folding Receiver architecture

Nyquist Folding Receiver(NYFR)is a perceptron structure that realizes a low probability of intercept(LPI)signal analog to information.Aiming at the problem of LPI radar signal receiving,the time domain,frequency domain,and time-frequency domain problems of signals intercepted by NYFR structure are studied.Combined with the time-frequency analysis(TFA)method,a radar recognition scheme based on deep learning(DL)is introduced,which can reliably classify common LPI radar signals.First,the structure of NYFR and its characteristics in the time domain,frequency domain,and time and frequency domain are analyzed.Then,the received signal is then converted into a time-frequency image(TFI).Finally,four kinds of DL algorithms are used to classify LPI radar signals.Simulation results demonstrate the correctness of the NYFR structure,and the effectiveness of the proposed recognition method is verified by comparison experiments.

FVID: Fishing Vessel Type Identification Based on VMS Trajectories

Vessel Monitoring System(VMS) provides a new opportunity for quantified fishing research. Many approaches have been proposed to recognize fishing activities with VMS trajectories based on the types of fishing vessels. However, one research problem is still calling for solutions, how to identify the fishing vessel type based on only VMS trajectories. This problem is important because it requires the fishing vessel type as a preliminary to recognize fishing activities from VMS trajectories. This paper proposes fishing vessel type identification scheme(FVID) based only on VMS trajectories. FVID exploits feature engineering and machine learning schemes of XGBoost as its two key blocks and classifies fishing vessels into nine types. The dataset contains all the fishing vessel trajectories in the East China Sea in March 2017, including 10031 pre-registered fishing vessels and 1350 unregistered vessels of unknown types. In order to verify type identification accuracy, we first conduct a 4-fold cross-validation on the trajectories of registered fishing vessels. The classification accuracy is 95.42%. We then apply FVID to the unregistered fishing vessels to identify their types. After classifying the unregistered fishing vessel types, their fishing activities are further recognized based upon their types. At last, we calculate and compare the fishing density distribution in the East China Sea before and after applying the unregistered fishing vessels, confirming the importance of type identification of unregistered fishing vessels.

Improvement of X-Band Polarization Radar Melting Layer Recognition by the Bayesian Method and ITS Impact on Hydrometeor Classification

Using melting layer(ML)and non-melting layer(NML)data observed with the X-band dual linear polarization Doppler weather radar(X-POL)in Shunyi,Beijing,the reflectivity(ZH),differential reflectivity(ZDR),and correlation coefficient(CC)in the ML and NML are obtained in several stable precipitation processes.The prior probability density distributions(PDDs)of the ZH,ZDR and CC are calculated first,and then the probabilities of ZH,ZDR and CC at each radar gate are determined(PBB in the ML and PNB in the NML)by the Bayesian method.When PBB>PNB the gate belongs to the ML,and when PBB<PNB the gate belongs to the NML.The ML identification results with the Bayesian method are contrasUsing melting layer(ML)and non-melting layer(NML)data observed with the X-band dual linear polarization Doppler weather radar(X-POL)in Shunyi,Beijing,the reflectivity(ZH),differential reflectivity(ZDR),and correlation coefficient(CC)in the ML and NML are obtained in several stable precipitation processes.The prior probability density distributions(PDDs)of the ZH,ZDR and CC are calculated first,and then the probabilities of ZH,ZDR and CC at each radar gate are determined(PBB in the ML and PNB in the NML)by the Bayesian method.When PBB>PNB the gate belongs to the ML,and when PBB<PNB the gate belongs to the NML.The ML identification results with the Bayesian method are contrasted under the conditions of the independent PDDs and joint PDDs of the ZH,ZDR and CC.The results suggest that MLs can be identified effectively,although there are slight differences between the two methods.Because the values of the polarization parameters are similar in light rain and dry snow,it is difficult for the polarization radar to distinguish them.After using the Bayesian method to identify the ML,light rain and dry snow can be effectively separated with the X-POL observed data.ted under the conditions of the independent PDDs and joint PDDs of the ZH,ZDR and CC.The results suggest that MLs can be identified effectively,although there are slight differences between the two methods.Because the values of the polarization parameters are similar in light rain and dry snow,it is difficult for the polarization radar to distinguish them.After using the Bayesian method to identify the ML,light rain and dry snow can be effectively separated with the X-POL observed data.

Deep learning of rock microscopic images for intelligent lithology identification: Neural network comparison and selection

An intelligent lithology identification method is proposed based on deep learning of the rock microscopic images.Based on the characteristics of rock images in the dataset,we used Xception,MobileNet_v2,Inception_ResNet_v2,Inception_v3,Densenet121,ResNet101_v2,and ResNet-101 to develop microscopic image classification models,and then the network structures of seven different convolutional neural networks(CNNs)were compared.It shows that the multi-layer representation of rock features can be represented through convolution structures,thus better feature robustness can be achieved.For the loss function,cross-entropy is used to back propagate the weight parameters layer by layer,and the accuracy of the network is improved by frequent iterative training.We expanded a self-built dataset by using transfer learning and data augmentation.Next,accuracy(acc)and frames per second(fps)were used as the evaluation indexes to assess the accuracy and speed of model identification.The results show that the Xception-based model has the optimum performance,with an accuracy of 97.66%in the training dataset and 98.65%in the testing dataset.Furthermore,the fps of the model is 50.76,and the model is feasible to deploy under different hardware conditions and meets the requirements of rapid lithology identification.This proposed method is proved to be robust and versatile in generalization performance,and it is suitable for both geologists and engineers to identify lithology quickly.

Approximate entropy and support vector machines for electroencephalogram signal classification

The automatic detection and identification of electroencephalogram waves play an important role in the prediction, diagnosis and treatment of epileptic seizures. In this study, a nonlinear dynamics index–approximate entropy and a support vector machine that has strong generalization ability were applied to classify electroencephalogram signals at epileptic interictal and ictal periods. Our aim was to verify whether approximate entropy waves can be effectively applied to the automatic real-time detection of epilepsy in the electroencephalogram, and to explore its generalization ability as a classifier trained using a nonlinear dynamics index. Four patients presenting with partial epileptic seizures were included in this study. They were all diagnosed with neocortex localized epilepsy and epileptic foci were clearly observed by electroencephalogram. The electroencephalogram data form the four involved patients were segmented and the characteristic values of each segment, that is, the approximate entropy, were extracted. The support vector machine classifier was constructed with the approximate entropy extracted from one epileptic case, and then electroencephalogram waves of the other three cases were classified, reaching a 93.33% accuracy rate. Our findings suggest that the use of approximate entropy allows the automatic real-time detection of electroencephalogram data in epileptic cases. The combination of approximate entropy and support vector machines shows good generalization ability for the classification of electroencephalogram signals for epilepsy.

Identification of Convective and Stratiform Clouds Based on the Improved DBSCAN Clustering Algorithm

A convective and stratiform cloud classification method for weather radar is proposed based on the density-based spatial clustering of applications with noise(DBSCAN)algorithm.To identify convective and stratiform clouds in different developmental phases,two-dimensional(2D)and three-dimensional(3D)models are proposed by applying reflectivity factors at 0.5°and at 0.5°,1.5°,and 2.4°elevation angles,respectively.According to the thresholds of the algorithm,which include echo intensity,the echo top height of 35 dBZ(ET),density threshold,andεneighborhood,cloud clusters can be marked into four types:deep-convective cloud(DCC),shallow-convective cloud(SCC),hybrid convective-stratiform cloud(HCS),and stratiform cloud(SFC)types.Each cloud cluster type is further identified as a core area and boundary area,which can provide more abundant cloud structure information.The algorithm is verified using the volume scan data observed with new-generation S-band weather radars in Nanjing,Xuzhou,and Qingdao.The results show that cloud clusters can be intuitively identified as core and boundary points,which change in area continuously during the process of convective evolution,by the improved DBSCAN algorithm.Therefore,the occurrence and disappearance of convective weather can be estimated in advance by observing the changes of the classification.Because density thresholds are different and multiple elevations are utilized in the 3D model,the identified echo types and areas are dissimilar between the 2D and 3D models.The 3D model identifies larger convective and stratiform clouds than the 2D model.However,the developing convective clouds of small areas at lower heights cannot be identified with the 3D model because they are covered by thick stratiform clouds.In addition,the 3D model can avoid the influence of the melting layer and better suggest convective clouds in the developmental stage.

Application of GC-qqqMS/MS in Gasoline Grades and Regions Identification

Based on GC-qqqMS/MS,a qualitative and quantitative analysis method for identifying characteristic markers in gasoline samples was established.According to the established method,different grades(#92,#95,#98)of gasoline samples collected from different regions(southern,central,northeastern,and northwestern China)were studied and analyzed.The results show that the gasolines can be classified by the relative contents of aromatics,naphthalene series,indene and other characteristic substances.On the basis of the high sensitivity and selectivity of GC-qqqMS/MS,the experiment has identified the characteristic substances,and used the characteristic-ratios methods as well as stoichiometric tools to study the grades and regional differences of gasoline products.It is conducive to the identification and classification of ILR in public security in fire cases,and can also meet the actual handling demand.

Fault Pattern Diagnosis and Classification in Sensor Nodes Using Fall Curve

The rapid expansion of Internet of Things(IoT)devices deploys various sensors in different applications like homes,cities and offices.IoT applications depend upon the accuracy of sensor data.So,it is necessary to predict faults in the sensor and isolate their cause.A novel primitive technique named fall curve is presented in this paper which characterizes sensor faults.This technique identifies the faulty sensor and determines the correct working of the sensor.Different sources of sensor faults are explained in detail whereas various faults that occurred in sensor nodes available in IoT devices are also presented in tabular form.Fault prediction in digital and analog sensors along with methods of sensor fault prediction are described.There are several advantages and disadvantages of sensor fault prediction methods and the fall curve technique.So,some solutions are provided to overcome the limitations of the fall curve technique.In this paper,a bibliometric analysis is carried out to visually analyze 63 papers fetched from the Scopus database for the past five years.Its novelty is to predict a fault before its occurrence by looking at the fall curve.The sensing of current flow in devices is important to prevent a major loss.So,the fall curves of ACS712 current sensors configured on different devices are drawn for predicting faulty or non-faulty devices.The analysis result proved that if any of the current sensors gets faulty,then the fall curve will differ and the value will immediately drop to zero.Various evaluation metrics for fault prediction are also described in this paper.At last,this paper also addresses some possible open research issues which are important to deal with false IoT sensor data.

RFID Complex Event Processing: Applications in Real-Time Locating System

Complex event processing (CEP) can extract meaningful events for real-time locating system (RTLS) applications. To identify complex event accurately in RTLS, we propose a new RFID complex event processing method GEEP, which is based on the timed automata (TA) theory. By devising RFID locating application into complex events, we model the timing diagram of RFID data streams based on the TA. We optimize the constraint of the event streams and propose a novel method to derive the constraint between objects, as well as the constraint between object and location. Experiments prove the proposed method reduces the cost of RFID complex event processing, and improves the efficiency of the RTLS.