Hydraulic fracturing technology is an important means of shale gas development,and microseismic monitoring is the key technology of fracturing effect evaluation.In this study,hydraulic fracturing and microseismic moni...Hydraulic fracturing technology is an important means of shale gas development,and microseismic monitoring is the key technology of fracturing effect evaluation.In this study,hydraulic fracturing and microseismic monitoring were simultaneously conducted in the Eyangye 2HF well(hereinafter referred to as EYY2HF well).The target stratum of this well is the second member of the Doushantuo Formation of the Sinian System,which is the oldest stratum of horizontal shale gas wells in the world.A total of 4341 microseismic fracturing events were identified,and 23 fracturing stages of the well were defined.The fluctuation of the number of events showed a repeating“high-low”pattern,and the average energy of these events showed minimal differences.These findings indicate that the water pressure required for the reconstruction of the EYY2HF well is appropriate.The main body of the fracture network extended from northwest to southeast,consistent with the interpretation of regional geological and seismic data.The stimulated rock volumes showed a linear increase with the increase of the fracturing stage.Some technological measures,such as quick lift displacement,quick lift sand ratio,and pump stop for secondary sand addition,were adopted during fracturing to increase the complexity of the fracture network.Microseismic fracture monitoring of the well achieved expected eff ects and guided real-time fracturing operations and fracturing eff ect evaluation.展开更多
Microseismic technology has been proven to be a practical approach for in-situ monitoring of fracture growth during hydraulic fracture stimulations. Microseismic monitoring has rapidly evolved in acquisition methodolo...Microseismic technology has been proven to be a practical approach for in-situ monitoring of fracture growth during hydraulic fracture stimulations. Microseismic monitoring has rapidly evolved in acquisition methodology, data processing, and in this paper, we evaluate the progression of this technology with emphasis on their applications in Barnett shale gas reservoir. Microseismic data analysis indicates a direct proportion between microseismic moment magnitude and depth, yet no relation between microseismic activity and either injection rate or injection volume has been observed. However, large microseismic magnitudes have been recorded where hydraulic fracturing stimulation approaches a fault and therefore the geologic framework should be integrated in such programs. In addition, the geometry of fracture growth resulted by proppant interactions with naturally fractured formations follows unpredictable fashion due to redirecting the injection fluids along flow paths associated with the pre-existing fault network in the reservoir. While microseismic imaging is incredibly useful in revealing the fracture geometry and the way the fracture evolves, recently several concerns have been raised regarding the capability of microseismic data to provide the fracture dimensional parameters and the fracture mechanism that could provide detailed information for reservoir characterization.展开更多
In unconventional reservoirs, small faults allow the flow ofoil and gas as well as act as obstacles to exploration; for, （1） fracturing facilitates fluid migration, （2） reservoir flooding, and （3） triggering of ...In unconventional reservoirs, small faults allow the flow ofoil and gas as well as act as obstacles to exploration; for, （1） fracturing facilitates fluid migration, （2） reservoir flooding, and （3） triggering of small earthquakes. These small faults are not generally detected because of the low seismic resolution. However, such small faults are very active and release sufficient energy to initiate a large number of microseismic events （MEs） during hydraulic fracturing. In this study, we identified microfractures （MF） from hydraulic fracturing and natural small faults based on microseismicity characteristics, such as the time-space distribution, source mechanism, magnitude, amplitude, and frequency. First, I identified the mechanism of small faults and MF by reservoir stress analysis and calibrated the ME based on the microseismic magnitude. The dynamic characteristics （frequency and amplitude） of MEs triggered by natural faults and MF were analyzed; moreover, the geometry and activity types of natural fault and MF were grouped according to the source mechanism. Finally, the differences among time-space distribution, magnitude, source mechanism, amplitude, and frequency were used to differentiate natural faults and manmade fractures.展开更多
Petroleum reservoir operations such as oil and gas production, hydraulic fracturing, and water injection induce considerable stress changes that at some point result in rock failure and emanation of seismic energy. Su...Petroleum reservoir operations such as oil and gas production, hydraulic fracturing, and water injection induce considerable stress changes that at some point result in rock failure and emanation of seismic energy. Such seismic energy could be large enough to be felt in the neighborhood of the oil fields, therefore many issues are recently raised regarding its environmental impact. In this research we analyze the magnitudes of microseismicity induced by stimulation of unconventional reservoirs at various basins in the United States and Canada that monitored the microseismicity induced by hydraulic fracturing operations. In addition, the relationship between microseismic magnitude and both depth and injection parameters is examined to delineate the possible framework that controls the system. Generally, microseismicity of typical hydraulic fracturing and injection operations is relatively similar in the majority of basins under investigation and the overall associating seismic energy is not strong enough to be the important factor to jeopardize near surface groundwater resources. Furthermore, these events are less energetic compared to the moderately active tectonic zones through the world and usually do not extend over a long period at considerably deep parts. However, the huge volume of the treatment fluids and improper casing cementing operation seem to be primary sources for contaminating near surface water resources.展开更多
基金National key R&D plan(2016YFC060110605)National major projects(2016ZX05034004-005)。
文摘Hydraulic fracturing technology is an important means of shale gas development,and microseismic monitoring is the key technology of fracturing effect evaluation.In this study,hydraulic fracturing and microseismic monitoring were simultaneously conducted in the Eyangye 2HF well(hereinafter referred to as EYY2HF well).The target stratum of this well is the second member of the Doushantuo Formation of the Sinian System,which is the oldest stratum of horizontal shale gas wells in the world.A total of 4341 microseismic fracturing events were identified,and 23 fracturing stages of the well were defined.The fluctuation of the number of events showed a repeating“high-low”pattern,and the average energy of these events showed minimal differences.These findings indicate that the water pressure required for the reconstruction of the EYY2HF well is appropriate.The main body of the fracture network extended from northwest to southeast,consistent with the interpretation of regional geological and seismic data.The stimulated rock volumes showed a linear increase with the increase of the fracturing stage.Some technological measures,such as quick lift displacement,quick lift sand ratio,and pump stop for secondary sand addition,were adopted during fracturing to increase the complexity of the fracture network.Microseismic fracture monitoring of the well achieved expected eff ects and guided real-time fracturing operations and fracturing eff ect evaluation.
文摘Microseismic technology has been proven to be a practical approach for in-situ monitoring of fracture growth during hydraulic fracture stimulations. Microseismic monitoring has rapidly evolved in acquisition methodology, data processing, and in this paper, we evaluate the progression of this technology with emphasis on their applications in Barnett shale gas reservoir. Microseismic data analysis indicates a direct proportion between microseismic moment magnitude and depth, yet no relation between microseismic activity and either injection rate or injection volume has been observed. However, large microseismic magnitudes have been recorded where hydraulic fracturing stimulation approaches a fault and therefore the geologic framework should be integrated in such programs. In addition, the geometry of fracture growth resulted by proppant interactions with naturally fractured formations follows unpredictable fashion due to redirecting the injection fluids along flow paths associated with the pre-existing fault network in the reservoir. While microseismic imaging is incredibly useful in revealing the fracture geometry and the way the fracture evolves, recently several concerns have been raised regarding the capability of microseismic data to provide the fracture dimensional parameters and the fracture mechanism that could provide detailed information for reservoir characterization.
基金supported by the National Key Research and Development Project of China(No.2016ZX05023-004)
文摘In unconventional reservoirs, small faults allow the flow ofoil and gas as well as act as obstacles to exploration; for, （1） fracturing facilitates fluid migration, （2） reservoir flooding, and （3） triggering of small earthquakes. These small faults are not generally detected because of the low seismic resolution. However, such small faults are very active and release sufficient energy to initiate a large number of microseismic events （MEs） during hydraulic fracturing. In this study, we identified microfractures （MF） from hydraulic fracturing and natural small faults based on microseismicity characteristics, such as the time-space distribution, source mechanism, magnitude, amplitude, and frequency. First, I identified the mechanism of small faults and MF by reservoir stress analysis and calibrated the ME based on the microseismic magnitude. The dynamic characteristics （frequency and amplitude） of MEs triggered by natural faults and MF were analyzed; moreover, the geometry and activity types of natural fault and MF were grouped according to the source mechanism. Finally, the differences among time-space distribution, magnitude, source mechanism, amplitude, and frequency were used to differentiate natural faults and manmade fractures.
文摘Petroleum reservoir operations such as oil and gas production, hydraulic fracturing, and water injection induce considerable stress changes that at some point result in rock failure and emanation of seismic energy. Such seismic energy could be large enough to be felt in the neighborhood of the oil fields, therefore many issues are recently raised regarding its environmental impact. In this research we analyze the magnitudes of microseismicity induced by stimulation of unconventional reservoirs at various basins in the United States and Canada that monitored the microseismicity induced by hydraulic fracturing operations. In addition, the relationship between microseismic magnitude and both depth and injection parameters is examined to delineate the possible framework that controls the system. Generally, microseismicity of typical hydraulic fracturing and injection operations is relatively similar in the majority of basins under investigation and the overall associating seismic energy is not strong enough to be the important factor to jeopardize near surface groundwater resources. Furthermore, these events are less energetic compared to the moderately active tectonic zones through the world and usually do not extend over a long period at considerably deep parts. However, the huge volume of the treatment fluids and improper casing cementing operation seem to be primary sources for contaminating near surface water resources.
