Real-Time Intelligent Diagnosis of Co-frequency Vibration Faults in Rotating Machinery Based on Lightweight-Convolutional Neural Networks

The co-frequency vibration fault is one of the common faults in the operation of rotating equipment,and realizing the real-time diagnosis of the co-frequency vibration fault is of great significance for monitoring the health state and carrying out vibration suppression of the equipment.In engineering scenarios,co-frequency vibration faults are highlighted by rotational frequency and are difficult to identify,and existing intelligent methods require more hardware conditions and are exclusively time-consuming.Therefore,Lightweight-convolutional neural networks(LW-CNN)algorithm is proposed in this paper to achieve real-time fault diagnosis.The critical parameters are discussed and verified by simulated and experimental signals for the sliding window data augmentation method.Based on LW-CNN and data augmentation,the real-time intelligent diagnosis of co-frequency is realized.Moreover,a real-time detection method of fault diagnosis algorithm is proposed for data acquisition to fault diagnosis.It is verified by experiments that the LW-CNN and sliding window methods are used with high accuracy and real-time performance.

A Real-time Lithological Identification Method based on SMOTE-Tomek and ICSA Optimization

In petroleum engineering,real-time lithology identification is very important for reservoir evaluation,drilling decisions and petroleum geological exploration.A lithology identification method while drilling based on machine learning and mud logging data is studied in this paper.This method can effectively utilize downhole parameters collected in real-time during drilling,to identify lithology in real-time and provide a reference for optimization of drilling parameters.Given the imbalance of lithology samples,the synthetic minority over-sampling technique(SMOTE)and Tomek link were used to balance the sample number of five lithologies.Meanwhile,this paper introduces Tent map,random opposition-based learning and dynamic perceived probability to the original crow search algorithm(CSA),and establishes an improved crow search algorithm(ICSA).In this paper,ICSA is used to optimize the hyperparameter combination of random forest(RF),extremely random trees(ET),extreme gradient boosting(XGB),and light gradient boosting machine(LGBM)models.In addition,this study combines the recognition advantages of the four models.The accuracy of lithology identification by the weighted average probability model reaches 0.877.The study of this paper realizes high-precision real-time lithology identification method,which can provide lithology reference for the drilling process.

Real-time prediction of mechanical behaviors of underwater shield tunnel structure using machine learning method based on structural health monitoring data

Predicting the mechanical behaviors of structure and perceiving the anomalies in advance are essential to ensuring the safe operation of infrastructures in the long run.In addition to the incomplete consideration of influencing factors,the prediction time scale of existing studies is rough.Therefore,this study focuses on the development of a real-time prediction model by coupling the spatio-temporal correlation with external load through autoencoder network(ATENet)based on structural health monitoring(SHM)data.An autoencoder mechanism is performed to acquire the high-level representation of raw monitoring data at different spatial positions,and the recurrent neural network is applied to understanding the temporal correlation from the time series.Then,the obtained temporal-spatial information is coupled with dynamic loads through a fully connected layer to predict structural performance in next 12 h.As a case study,the proposed model is formulated on the SHM data collected from a representative underwater shield tunnel.The robustness study is carried out to verify the reliability and the prediction capability of the proposed model.Finally,the ATENet model is compared with some typical models,and the results indicate that it has the best performance.ATENet model is of great value to predict the realtime evolution trend of tunnel structure.

Cyber Resilience through Real-Time Threat Analysis in Information Security

This paper examines how cybersecurity is developing and how it relates to more conventional information security. Although information security and cyber security are sometimes used synonymously, this study contends that they are not the same. The concept of cyber security is explored, which goes beyond protecting information resources to include a wider variety of assets, including people [1]. Protecting information assets is the main goal of traditional information security, with consideration to the human element and how people fit into the security process. On the other hand, cyber security adds a new level of complexity, as people might unintentionally contribute to or become targets of cyberattacks. This aspect presents moral questions since it is becoming more widely accepted that society has a duty to protect weaker members of society, including children [1]. The study emphasizes how important cyber security is on a larger scale, with many countries creating plans and laws to counteract cyberattacks. Nevertheless, a lot of these sources frequently neglect to define the differences or the relationship between information security and cyber security [1]. The paper focus on differentiating between cybersecurity and information security on a larger scale. The study also highlights other areas of cybersecurity which includes defending people, social norms, and vital infrastructure from threats that arise from online in addition to information and technology protection. It contends that ethical issues and the human factor are becoming more and more important in protecting assets in the digital age, and that cyber security is a paradigm shift in this regard [1].

Towards Cache-Assisted Hierarchical Detection for Real-Time Health Data Monitoring in IoHT

Real-time health data monitoring is pivotal for bolstering road services’safety,intelligence,and efficiency within the Internet of Health Things(IoHT)framework.Yet,delays in data retrieval can markedly hinder the efficacy of big data awareness detection systems.We advocate for a collaborative caching approach involving edge devices and cloud networks to combat this.This strategy is devised to streamline the data retrieval path,subsequently diminishing network strain.Crafting an adept cache processing scheme poses its own set of challenges,especially given the transient nature of monitoring data and the imperative for swift data transmission,intertwined with resource allocation tactics.This paper unveils a novel mobile healthcare solution that harnesses the power of our collaborative caching approach,facilitating nuanced health monitoring via edge devices.The system capitalizes on cloud computing for intricate health data analytics,especially in pinpointing health anomalies.Given the dynamic locational shifts and possible connection disruptions,we have architected a hierarchical detection system,particularly during crises.This system caches data efficiently and incorporates a detection utility to assess data freshness and potential lag in response times.Furthermore,we introduce the Cache-Assisted Real-Time Detection(CARD)model,crafted to optimize utility.Addressing the inherent complexity of the NP-hard CARD model,we have championed a greedy algorithm as a solution.Simulations reveal that our collaborative caching technique markedly elevates the Cache Hit Ratio(CHR)and data freshness,outshining its contemporaneous benchmark algorithms.The empirical results underscore the strength and efficiency of our innovative IoHT-based health monitoring solution.To encapsulate,this paper tackles the nuances of real-time health data monitoring in the IoHT landscape,presenting a joint edge-cloud caching strategy paired with a hierarchical detection system.Our methodology yields enhanced cache efficiency and data freshness.The corroborative numerical data accentuates the feasibility and relevance of our model,casting a beacon for the future trajectory of real-time health data monitoring systems.

Quality control of marine big data——a case study of real-time observation station data in Qingdao

Offshore waters provide resources for human beings,while on the other hand,threaten them because of marine disasters.Ocean stations are part of offshore observation networks,and the quality of their data is of great significance for exploiting and protecting the ocean.We used hourly mean wave height,temperature,and pressure real-time observation data taken in the Xiaomaidao station(in Qingdao,China)from June 1,2017,to May 31,2018,to explore the data quality using eight quality control methods,and to discriminate the most effective method for Xiaomaidao station.After using the eight quality control methods,the percentages of the mean wave height,temperature,and pressure data that passed the tests were 89.6%,88.3%,and 98.6%,respectively.With the marine disaster(wave alarm report)data,the values failed in the test mainly due to the influence of aging observation equipment and missing data transmissions.The mean wave height is often affected by dynamic marine disasters,so the continuity test method is not effective.The correlation test with other related parameters would be more useful for the mean wave height.

A multi-sensor-based distributed real-time measurement system for glacier deformation

Glacier disasters occur frequently in alpine regions around the world,but the current conventional geological disaster measurement technology cannot be directly used for glacier disaster measurement.Hence,in this study,a distributed multi-sensor measurement system for glacier deformation was established by integrating piezoelectric sensing,coded sensing,attitude sensing technology and wireless communication technology.The traditional Modbus protocol was optimized to solve the problem of data identification confusion of different acquisition nodes.Through indoor wireless transmission,adaptive performance analysis,error measurement experiment and landslide simulation experiment,the performance of the measurement system was analyzed and evaluated.Using unmanned aerial vehicle technology,the reliability and effectiveness of the measurement system were verified on the site of Galongla glacier in southeastern Tibet,China.The results show that the mean absolute percentage errors were only 1.13%and 2.09%for the displacement and temperature,respectively.The distributed glacier deformation real-time measurement system provides a new means for the assessment of the development process of glacier disasters and disaster prevention and mitigation.

Data network traffic analysis and optimization strategy of real-time power grid dynamic monitoring system for wide-frequency measurements

The application and development of a wide-area measurement system(WAMS)has enabled many applications and led to several requirements based on dynamic measurement data.Such data are transmitted as big data information flow.To ensure effective transmission of wide-frequency electrical information by the communication protocol of a WAMS,this study performs real-time traffic monitoring and analysis of the data network of a power information system,and establishes corresponding network optimization strategies to solve existing transmission problems.This study utilizes the traffic analysis results obtained using the current real-time dynamic monitoring system to design an optimization strategy,covering the optimization in three progressive levels:the underlying communication protocol,source data,and transmission process.Optimization of the system structure and scheduling optimization of data information are validated to be feasible and practical via tests.

Accuracy Assessment and Guidelines for Manual Traffic Counts from Pre-Recorded Video Data

Traffic count is the fundamental data source for transportation planning, management, design, and effectiveness evaluation. Recording traffic flow and counting from the recorded videos are increasingly used due to convenience, high accuracy, and cost-effectiveness. Manual counting from pre-recorded video footage can be prone to inconsistencies and errors, leading to inaccurate counts. Besides, there are no standard guidelines for collecting video data and conducting manual counts from the recorded videos. This paper aims to comprehensively assess the accuracy of manual counts from pre-recorded videos and introduces guidelines for efficiently collecting video data and conducting manual counts by trained individuals. The accuracy assessment of the manual counts was conducted based on repeated counts, and the guidelines were provided from the experience of conducting a traffic survey on forty strip mall access points in Baton Rouge, Louisiana, USA. The percentage of total error, classification error, and interval error were found to be 1.05 percent, 1.08 percent, and 1.29 percent, respectively. Besides, the percent root mean square errors (RMSE) were found to be 1.13 percent, 1.21 percent, and 1.48 percent, respectively. Guidelines were provided for selecting survey sites, instruments and timeframe, fieldwork, and manual counts for an efficient traffic data collection survey.

Web-based GIS System for Real-time Field Data Collection Using Personal Mobile Phone

Recently, use of mobile communicational devices in field data collection is increasing such as smart phones and cellular phones due to emergence of embedded Global Position System GPS and Wi-Fi Internet access. Accurate timely and handy field data collection is required for disaster management and emergency quick responses. In this article, we introduce web-based GIS system to collect the field data by personal mobile phone through Post Office Protocol POP3 mail server. The main objective of this work is to demonstrate real-time field data collection method to the students using their mobile phone to collect field data by timely and handy manners, either individual or group survey in local or global scale research.

Real-time Audio &Video Transmission System Based on Visible Light Communication

With the increasing popularity of solid sate lighting devices, Visible Light Communication (VLC) is globally recognized as an advanced and promising technology to realize short-range, high speed as well as large capacity wireless data transmission. In this paper, we propose a prototype of real-time audio and video broadcast system using inexpensive commercially available light emitting diode (LED) lamps. Experimental results show that real-time high quality audio and video with the maximum distance of 3 m can be achieved through proper layout of LED sources and improvement of concentration effects. Lighting model within room environment is designed and simulated which indicates close relationship between layout of light sources and distribution of illuminance.

Integrated Real-Time Big Data Stream Sentiment Analysis Service

Opinion (sentiment) analysis on big data streams from the constantly generated text streams on social media networks to hundreds of millions of online consumer reviews provides many organizations in every field with opportunities to discover valuable intelligence from the massive user generated text streams. However, the traditional content analysis frameworks are inefficient to handle the unprecedentedly big volume of unstructured text streams and the complexity of text analysis tasks for the real time opinion analysis on the big data streams. In this paper, we propose a parallel real time sentiment analysis system: Social Media Data Stream Sentiment Analysis Service (SMDSSAS) that performs multiple phases of sentiment analysis of social media text streams effectively in real time with two fully analytic opinion mining models to combat the scale of text data streams and the complexity of sentiment analysis processing on unstructured text streams. We propose two aspect based opinion mining models: Deterministic and Probabilistic sentiment models for a real time sentiment analysis on the user given topic related data streams. Experiments on the social media Twitter stream traffic captured during the pre-election weeks of the 2016 Presidential election for real-time analysis of public opinions toward two presidential candidates showed that the proposed system was able to predict correctly Donald Trump as the winner of the 2016 Presidential election. The cross validation results showed that the proposed sentiment models with the real-time streaming components in our proposed framework delivered effectively the analysis of the opinions on two presidential candidates with average 81% accuracy for the Deterministic model and 80% for the Probabilistic model, which are 1% - 22% improvements from the results of the existing literature.

Real-time performance of periodic data transmission in EPA industrial Ethernet

To evaluate and improve the real-time performance of Ethernet for plant automation（EPA） industrial Ethernet,the real-time performance of EPA periodic data transmission was theoretically and experimentally studied.By analyzing information transmission regularity and EPA deterministic scheduling mechanism,periodic messages were categorized as different modes according to their entering-queue time.The scheduling characteristics and delivery time of each mode and their interacting relations were studied,during which the models of real-time performance of periodic information transmission in EPA system were established.On this basis,an experimental platform is developed to test the delivery time of periodic messages transmission in EPA system.According to the analysis and the experiment,the main factors that limit the real-time performance of EPA periodic data transmission and the improvement methods were proposed.

Alternate Data Acquisition and Real-time Monitoring System on HT-7 Tokamak

A new system called alternate data acquisition and real-time monitoring system has been developed for long-time discharge in tokamak operation. It can support continuous on-line data acquisition at a high sampling rate and a graphic display of the plasma parameters during the discharge. Thus operators can monitor and control the plasma state in real time. An application of this system has been demonstrated on the HT-7 tokamak.

Study on Rear-end Real-time Data Quality Control Method of Regional Automatic Weather Station

[Objective] The aim was to study the rear-end real-time data quality control method of regional automatic weather station. [Method] The basic content and steps of rear-end real-time data quality control of regional automatic weather station were introduced. Each element was treated with systematic quality control procedure. The existence of rear-end real time data of regional meteorological station in Guangxi was expounded. Combining with relevant elements and linear changes, improvement based on traditional quality control method was made. By dint of evaluation and relevant check of element, the quality of temperature and pressure was controlled. [Result] The method was optimized based on traditional quality control method, and it narrowed the effectiveness of real-time data quality control. The quality check of hourly precipitation applied relevant check of hourly minimum temperature, vertical consistency check of radar data, which can effectively improve the accuracy and credibility of hourly precipitation quality control. [Conclusion] The method was on trial for one year in the quality control of real-time data in the regional automatic meteorological station in Guangxi and had gained good outcome.

If real-time route and high-speed data is important, GoTa is vital.

GoTa TM from ZTE is the world’s first CDMA-based system. Now, ZTE proudly introduces its third-generation digital trunking system featuring

If real-time route and high-speed data is important,GoTa is vital.

GoTaTM from ZTE is the world’s first CDMA-based system. Now, ZTE proudly introduces its third-generation digital trunking system featuring a centralized dispatch,

If real-time route and high-speed data is important, GoTa is vital.

Go Tafrom ZTE is the world’s first CDMA-based system. Now, ZTE proudly introduces its third-generation digital trunking system featuring a centralized dispatch,

Quality Control System of Meteorological Real-time Data from Automatic Weather Stations in Shandong

The quality control system for meteorological real-time data from automatic weather stations in Shandong realized integration of communi- cation system and provincial quality control system, and an interaction platform which was mainly created by Web was set up. The system not only was fully guaranteed for the funning of basic business, also improved the reliability of the data.

Opportunities and Challenges of College Mental Health Education from the Perspective of Big Data

This paper explores the opportunities and challenges of college mental health education from the perspective of big data.Firstly,through literature review,the importance of mental health education and the current issues are elucidated.Then,from the perspective of big data,the potential opportunities of big data in college mental health education are analyzed,including data-driven personalized education,real-time monitoring and warning systems,and interdisciplinary research and collaboration.At the same time,the challenges faced by college mental health education under the perspective of big data are also pointed out,such as data privacy and security issues,insufficient data analysis and interpretation capabilities,and inadequate technical facilities and talent support.Lastly,the research content of this paper is summarized,and directions and suggestions for future research are proposed.