Fundamentals,recent developments and prospects of lithium and non-lithium electrochemical rechargeable battery systems

The present and future energy requirements of mankind can be fulfilled with sustained research and development efforts by global scientists.The purpose of this review paper is to provide an overview of the fundamentals,recent advancements on Lithium and non-Lithium electrochemical rechargeable battery systems,and their future prospects.The initial part of this review paper is dedicated to the advancement and challenges faced by the conventional rechargeable batteries,such as lead-acid,Ni-Cd and Ni-MH batteries.The subsequent section of this review focuses on an in-depth analysis of two major categories of rechargeable batteries,namely lithium-based rechargeable battery systems and alternative non-Lithium rechargeable battery systems.The working principle,construction,and a few important research progress on Li-ion,Li-O_(2),Li-CO_(2) and Li-S batteries have been highlighted.The recent progress and challenges of the alternate batteries such as Na-ion,Na-S,Mg-ion,K-ion,Al-ion,Al-air,Zn-ion and Zn-air are also discussed in this review.The large gap between theoretical and practical electrochemical values for the alternate battery system must be filled by adopting a series of design architectures followed by modern instrumentation for developing next-generation batteries in a sustainable and efficient way.

Template-free synthesis of hollow carbon-based nanostructures from MOFs for rechargeable battery applications

Hollow carbon-based nanostructures(HCNs)have found broad applications in various fields,particularly rechargeable batteries.However,the syntheses of HCNs usually rely on template methods,which are time-consuming,low-yield,and environmentally detrimental.Metal-organic frameworks(MOFs),constructed by organic ligands and inorganic metal nodes,have been identified as effective platforms for preparing HCNs without adding extra templates.This review summarized the recent progress in template-free synthesis of HCNs enabled by MOFs and their applications in rechargeable batteries.Different template-free strategies were introduced first with mechanistic insights into the hollowing mechanism.Then the electrochemical performances of the HCNs were discussed with highlight on the structure-function correlation.It is found that the built-in cavities and nonporous for HCNs is of critical importance to increase the storage sites for high capacity,to enhance charge and mass transport kinetics for high-rate capability,and to ensure the resilient electrode structure for stable cycling.Finally,the challenges and opportunities regarding MOFs-derived HCNs and their applications in rechargeable batteries were discussed.

Superior oxygen electrocatalyst derived from metal organic coordination polymers by instantaneous nucleation and epitaxial growth for rechargeable Li-O_(2) battery

Rechargeable aprotic Li-O_(2)batteries have attractea increasing attention due to their extremely high capacity,and it is very important to design appropriate strategies to synthesize efficient catalysts used as oxygen cathode.In present work,we present an expedient "instantaneous nucleation and epitaxial growth"(INEG) synthesis strategy for convenient and large-scale synthesis of ultrafine MOCPs nanoparticles(size 50-100 nm) with obvious advantages such as fast synthesis,high yields,low costs and reduced synthetic steps.The bimetallic Ru/Co-MOCPs are further pyrolyzed to obtain bimetallic Coand low content of Ru-based nanoparticles embedded within nitrogen-doped carbon(Ru/Co@N-C) as an efficient catalyst used in Li-O_(2)battery.The Ru/Co@N-C provides porous carbon framework for the ion transportation and O_(2)diffusion,and has large amounts of metal/nonmetal sites as active site to promote the oxygen reduction reaction(ORR)/oxygen evolution reaction(OER) in Li-O_(2)batteries.As a consequence,a high discharge specific capacity of 15246 mA h g^(-1)at 250 mA g^(-1), excellent rate capability at different current densities,and stable overpotential during cycling,are achieved.This work opened up a new understanding for the industrialized synthesis of ultrafine catalysts for Li-O_(2)batteries with excellent structural characteristics and electrochemical performance.

Understanding the catalysis of chromium trioxide added magnesium hydride for hydrogen storage and Li ion battery applications

This study explores how the chemical interaction between magnesium hydride(MgH_(2))and the additive CrO_(3) influences the hydrogen/lithium storage characteristics of MgH_(2).We have observed that a 5 wt.%CrO_(3) additive reduces the dehydrogenation activation energy of MgH_(2) by 68 kJ/mol and lowers the required dehydrogenation temperature by 80℃.CrO_(3) added MgH_(2) was also tested as an anode in an Li ion battery,and it is possible to deliver over 90%of the total theoretical capacity(2038 mAh/g).Evidence for improved reversibility in the battery reaction is found only after the incorporation of additives with MgH_(2).In depth characterization study by X-ray diffraction(XRD)technique provides convincing evidence that the CrO_(3) additive interacts with MgH_(2) and produces Cr/MgO byproducts.Gibbs free energy analyses confirm the thermodynamic feasibility of conversion from MgH_(2)/CrO_(3) to MgO/Cr,which is well supported by the identification of Cr(0)in the powder by X ray photoelectron spectroscopy(XPS)technique.Through high resolution transmission electron microscopy(HRTEM)and energy dispersive spectroscopy(EDS)we found evidence for the presence of 5 nm size Cr nanocrystals on the surface of MgO rock salt nanoparticles.There is also convincing ground to consider that MgO rock salt accommodates Cr in the lattice.These observations support the argument that creation of active metal–metal dissolved rock salt oxide interface may be vital for improving the reactivity of MgH_(2),both for the improved storage of hydrogen and lithium.

Heteroatom anchors Fe-Mn dual-atom catalysts with bi-functional oxygen catalytic activity for low-temperature rechargeable flexible Zn-air batteries

M-N-C(M=Fe,Co,Ni,etc.) catalyst owns high catalytic activity in the oxygen catalytic reaction which is the most likely to replace the Pt-based catalysts.But it is still a challenge to further increase the active site density.This article constructs the high-efficiency FeMn-N/S-C-1000 catalyst to realize ORR/OER bifunctional catalysis by hetero-atom,bimetal(Fe,Mn) doped simultaneously strategy.When evaluated it as bi-functional electro-catalysts,FeMn-N/S-C-1000 exhibits excellent catalytic activity(E_(1/2)=0.924 V,E_(j=10)=1.617 V) in alkaline media,outperforms conventional Pt/C,RuO_(2) and most non-precious-metal catalysts reported recently,Such outstanding performance is owing to N,S co-coordinated with metal to form multi-types of single atom,dual atom active sites to carry out bi-catalysis.Importantly,nitrite poison test provides the proof that the active sites of FeMn-N/S-C are more than that of single-atom catalysts to promote catalytic reactions directly.To better understand the local structure of Fe and Mn active sites,XAS and DFT were employed to reveal that FeMn-N_5/S-C site plays the key role during catalysis.Notably,the FeMn-N/S-C-1000 based low-temperature rechargeable flexible Zn-air also exhibits superior discharge performance and extraordinary durability at-40℃.This work will provide a new idea to design diatomic catalysts applied in low-temperature rechargeable batteries.

N-doped porous carbon hollow microspheres encapsulated with iron-based nanocomposites as advanced bifunctional catalysts for rechargeable Zn-air battery

The design and development of low-cost,efficient,and stable bifunctional electrocatalysts for the oxygen reduction reaction(ORR)and oxygen evolution reaction(OER)are desirable for rechargeable metal-air batteries.In this work,N-doped porous hollow carbon spheres encapsulated with ultrafine Fe/Fe3O4 nanoparticles(FeOx@N-PHCS)were fabricated by impregnation and subsequent pyrolysis,using melamine-formaldehyde resin spheres as self-sacrifice templates and polydopamine as N and C sources.The sufficient adsorption of Fe3+on the polydopamine endowed the formation of Fe-Nx species upon high-temperature carbonization.The prepared FeOx@N-PHCS has advanced features of large specific surface area,porous hollow structure,high content of N dopants,sufficient Fe-Nx species and ultrafine FeOx nanoparticles.These features endow FeOx@N-PHCS with enhanced mass transfer and considerable active sites,leading to high activity and stability in catalyzing ORR and OER in alkaline electrolyte.Furthermore,the rechargeable Zn-air battery with FeOx@N-PHCS as air cathode catalyst exhibits a large peak power density,narrow charge-discharge potential gap and robust cycling stability,demonstrating the potential of the fabricated FeOx@N-PHCS as a promising electrode material for metal-air batteries.This new finding may open an avenue for rational design of bifunctional catalysts by integrating different active components within all-in-one catalyst for different electrochemical reactions.

An interface-reconstruction effect for rechargeable aluminum battery in ionic liquid electrolyte to enhance cycling performances

Aluminum(Al) metal has been regarded as a promising anode for rechargeable batteries because of its natural abundance and high theoretical specific capacity. However, rechargeable aluminum batteries(RABs) using A1 metal as anode display poor cycling performances owing to interface problems between anode and electrolyte. The solid-electrolyte interphase(SEI) layer on the anode has been confirmed to be essential for improving cycling performances of rechargeable batteries. Therefore, we immerse the Al metal in ionic liquid electrolyte for some time before it is used as anode to remove the passive film and expose fresh Al to the electrolyte. Then the reactions of exposed Al, acid, oxygen and water in electrolyte are occurred to form an SEI layer in the cycle. Al/electrolyte/V_2 O_5 full batteries with the thin, uniform and stable SEI layer on Al metal anode perform high discharge capacity and coulombic efficiency(CE). This work illustrates that an SEI layer is formed on Al metal anode in the cycle using a simple and effective pretreatment process and results in superior cycling performances for RABs.

3D hollow sphere Co_3O_4/MnO_2-CNTs:Its high-performance bi-functional cathode catalysis and application in rechargeable zinc-air battery

There has been a continuous need for high active, excellently durable and low-cost electrocatalysts for rechargeable zinc-air batteries. Among many low-cost metal based candidates, transition metal oxides with the CNTs composite have gained increasing attention. In this paper, the 3-D hollow sphere MnO_2 nanotube-supported Co_3O_4 nanoparticles and its carbon nanotubes hybrid material(Co_3 O_4/MnO_2-CNTs) have been synthesized via a simple co-precipitation method combined with post-heat treatment. The morphology and composition of the catalysts are thoroughly analyzed through SEM, TEM, TEM-mapping, XRD, EDX and XPS. In comparison with the commercial 20% Pt/C, Co_3O_4/MnO_2,bare MnO_2 nanotubes and CNTs, the hybrid Co_3O_4/MnO_2-CNTs-350 exhibits perfect bi-functional catalytic activity toward oxygen reduction reaction and oxygen evolution reaction under alkaline condition(0.1 M KOH). Therefore, high cell performances are achieved which result in an appropriate open circuit voltage(～1.47 V),a high discharge peak power density(340 mW cm^(-2)) and a large specific capacity(775 mAh g^(-1) at 10 mA cm^(-2)) for the primary Zn-air battery, a small charge-discharge voltage gap and a high cycle-life(504 cycles at 10 mA cm^(-2) with 10 min per cycle) for the rechargeable Zn-air battery. In particular, the simple synthesis method is suitable for a large-scale production of this bifunctional material due to a green, cost effective and readily available process.

In-situ growth of CoNi bimetal anchored on carbon nanoparticle/nanotube hybrid for boosting rechargeable Zn-air battery

Exploring highly efficient non-precious metal based catalysts for bifunctional oxygen electrode is crucial for rechargeable metal-air batteries.In this study,with MOFs as precursors,a facile coprecipitation method is designed to realize in-situ growth of the CoNi anchored carbon nanoparticle/nanotube(CoNi/N-CNN)hybrid,which can achieve the simultaneous maximum exposure of both oxygen evolution reaction(OER)and oxygen reduction reaction(ORR)active centers.Benefiting from the unique structure,the CoNi/N-CNN catalyst exhibits excellent electrocatalytic performance for ORR(E_(onset)=1.183 V,E_(1/2)=0.819 V)and a low operating voltage of 1.718 V at 10 mA cm^(−2)(Ej=10)for OER.Delightfully,the home-made rechargeable Zn-air battery with CoNi/N-CNN delivers a high discharge power density up to 209 mW cm^(−2),and an outstanding charge–discharge cycling stability.The boosted bifunctional electrocatalytic activity can be ascribed to the strong coupling effect between Co/Ni center sites and defect-rich N-anchored carbon featured with porous and nanotube structure,which can introduce uniformly dispersed active sites,tailored electronic configuration,superb conductivity and convenient charge transfer process.The hybrid non-precious bimetal based electrocatalyst provides the possibility to develop the low-cost and high-efficient ORR/OER bifunctional electrocatalysts in rechargeable metal-air battery.

Zinc–Bromine Rechargeable Batteries:From Device Configuration,Electrochemistry,Material to Performance Evaluation

Zinc–bromine rechargeable batteries(ZBRBs)are one of the most powerful candidates for next-generation energy storage due to their potentially lower material cost,deep discharge capability,non-flammable electrolytes,relatively long lifetime and good reversibility.However,many opportunities remain to improve the efficiency and stability of these batteries for long-life operation.Here,we discuss the device configurations,working mechanisms and performance evaluation of ZBRBs.Both non-flow(static)and flow-type cells are highlighted in detail in this review.The fundamental electrochemical aspects,including the key challenges and promising solutions,are discussed,with particular attention paid to zinc and bromine half-cells,as their performance plays a critical role in determining the electrochemical performance of the battery system.The following sections examine the key performance metrics of ZBRBs and assessment methods using various ex situ and in situ/operando techniques.The review concludes with insights into future developments and prospects for high-performance ZBRBs.

Aerophilic Triphase Interface Tuned by Carbon Dots Driving Durable and Flexible Rechargeable Zn‑Air Batteries

Efficient bifunctional catalysts for oxygen reduction reaction(ORR)and oxygen evolution reaction(OER)are vital for rechargeable Zn-air batteries(ZABs).Herein,an oxygen-respirable sponge-like Co@C–O–Cs catalyst with oxygen-rich active sites was designed and constructed for both ORR and OER by a facile carbon dot-assisted strategy.The aerophilic triphase interface of Co@C–O–Cs cathode efficiently boosts oxygen diffusion and transfer.The theoretical calculations and experimental studies revealed that the Co–C–COC active sites can redistribute the local charge density and lower the reaction energy barrier.The Co@C–O–Cs catalyst displays superior bifunctional catalytic activities with a half-wave potential of 0.82 V for ORR and an ultralow overpotential of 294 mV at 10 mA cm^(−2) for OER.Moreover,it can drive the liquid ZABs with high peak power density(106.4 mW cm^(−2)),specific capacity(720.7 mAh g^(−1)),outstanding long-term cycle stability(over 750 cycles at 10 mA cm^(−2)),and exhibits excellent feasibility in flexible all-solid-state ZABs.These findings provide new insights into the rational design of efficient bifunctional oxygen catalysts in rechargeable metal-air batteries.

Bi-salt electrolyte for aqueous rechargeable aluminum battery

The exertion of superior high-energy density based on multivalent ions transfer of rechargeable aluminum batteries is greatly hindered by limited electrochemical stability window of typical water in salt electrolyte(Wi SE). Recently, it is reported that a second salt addition to the Wi SE can offer further suppression of water activities, and achieves a much wider electrochemical window compared with aqueous Wi SE electrolytes. Hence, we demonstrate a class of water in bi-salt electrolyte containing the trifluoromethanesulfonate(OTF), which exhibits an ultra-wide electrochemical window of 4.35 V and a very low overpotential of 14.6 m V. Moreover, the interface chemistry between cathode and electrolyte is also confirmed via kinetic analysis. Surprisingly, we find the electrolyte can effectively suppress Mn dissolution from the cathode, alleviate self-discharge behavior, and ensure a stable electrode–electrolyte interface based on the interface concentrated-confinement effect. Owing to these unique merits of water in bi-salt electrolyte, the AlxMnO_(2)·nH_(2)O material delivers a high capacity of 364 m Ah g;and superb long-term cycling performance > 150 cycles with a capacity decay rate of 0.37% per cycle with coulombic efficiency at ca. 95%.

Comments on “An ultrafast rechargeable aluminum ion battery”

Nature published an article'An ultrafast rechargeable aluminum ion battery'On April 6,2015.The authors used many new materials to compose the cell,such as three-dimensional graphitic-foam as the cathode,an ionic liquid electrolyte.The experimental cell has shown well-defined discharge voltage plateaus near 2 V.The cell is mechanically bendable and foldable without affecting its operation.

Electrolyte additive enhances the electrochemical performance of Cu for rechargeable Cu//Zn batteries

Cu-based cathodes in aqueous batteries become very attractive in view of high theoretical capacity,moderate operation voltage and rich reserves of raw materials.However,their applications are obstructed by serious side reactions.The side reaction mainly arises from the spontaneous formation of Cu_(2)O,which occupies the electrode surface and lowers the reaction reversibility.Here,Na_(2)EDTA is introduced to address these issues.Both experimental results and theoretical calculations indicate that the Na_(2)EDTA reshapes the solvation structure of Cu^(2+)and modifies the electrode/electrolyte interface.Therefore,the redox potential of Cu^(2+)/Cu_(2)O is reduced and the surface of Cu is protected from H2O,thereby inhibiting the formation of Cu_(2)O.Meanwhile,the change in the solvation structure reduces the electrostatic repulsion between Cu^(2+)and the cathode,leading to high local concentration and benefiting uniform deposition.The results shed light on the applications of rechargeable Cu-based batteries.

Metal-organic frameworks based single-atom catalysts for advanced fuel cells and rechargeable batteries

The next-generation energy storage systems such as fuel cells,metal-air batteries,and alkali metal(Li,Na)-chalcogen(S,Se)batteries have received increasing attention owing to their high energy density and low cost.However,one of the main obstacles of these systems is the poor reaction kinetics in the involved chemical reactions.Therefore,it is essential to incorporate suitable and efficient catalysts into the cell.These years,single-atom catalysts(SACs)are emerging as a frontier in catalysis due to their maximum atom efficiency and unique reaction selectivity.For SACs fabrication,metal-organic frameworks(MOFs)have been confirmed as promising templates or precursors due to their high metal loadings,structural adjustability,porosity,and tailorable catalytic site.In this review,we summarize effective strategies for fabricating SACs by MOFs with corresponding advanced characterization techniques and illustrate the key role of MOFs-based SACs in these batteries by explaining their reaction mechanisms and challenges.Finally,current applications,prospects,and opportunities for MOFs-based SACs in energy storage systems are discussed.

3D printing critical materials for rechargeable batteries: from materials, design and optimization strategies to applications

Three-dimensional(3D)printing,an additive manufacturing technique,is widely employed for the fabrication of various electrochemical energy storage devices(EESDs),such as batteries and supercapacitors,ranging from nanoscale to macroscale.This technique offers excellent manufacturing flexibility,geometric designability,cost-effectiveness,and eco-friendliness.Recent studies have focused on the utilization of 3D-printed critical materials for EESDs,which have demonstrated remarkable electrochemical performances,including high energy densities and rate capabilities,attributed to improved ion/electron transport abilities and fast kinetics.However,there is a lack of comprehensive reviews summarizing and discussing the recent advancements in the structural design and application of 3D-printed critical materials for EESDs,particularly rechargeable batteries.In this review,we primarily concentrate on the current progress in 3D printing(3DP)critical materials for emerging batteries.We commence by outlining the key characteristics of major 3DP methods employed for fabricating EESDs,encompassing design principles,materials selection,and optimization strategies.Subsequently,we summarize the recent advancements in 3D-printed critical materials(anode,cathode,electrolyte,separator,and current collector)for secondary batteries,including conventional Li-ion(LIBs),Na-ion(SIBs),K-ion(KIBs)batteries,as well as Li/Na/K/Zn metal batteries,Zn-air batteries,and Ni–Fe batteries.Within these sections,we discuss the 3DP precursor,design principles of 3D structures,and working mechanisms of the electrodes.Finally,we address the major challenges and potential applications in the development of 3D-printed critical materials for rechargeable batteries.

In-situ oriented oxygen-defect-rich Mn-N-O via nitridation and electrochemical oxidation based on industrial-scale Mn_(2)O_(3) to achieve high-performance aqueous zinc ion battery

As a general problem in the field of batteries,materials produced on a large industrial scale usually possess unsatisfactory electrochemical performances.Among them,manganese-based aqueous rechargeable zinc-ion batteries(ARZBs)have been emerging as promising large-scale energy storage systems owing to their high energy densities,low manufacturing cost and intrinsic high safety.However,the direct application of industrial-scale Mn2O3(MO)cathode exhibits poor electrochemical performance especially at high current rates.Herein,a highly reversible Mn-based cathode is developed from the industrial-scale MO by nitridation and following electrochemical oxidation,which triples the ion diffusion rate and greatly promotes the charge transfer.Notably,the cathode delivers a capacity of 161 m Ah g^(-1) at a high current density of 10 A g^(-1),nearly-three times the capacity of pristine MO(60 m Ah g^(-1)).Impressive specific capacity(243.4 m Ah g^(-1))is obtained without Mn^(2+) additive added in the electrolyte,much superior to the pristine MO(124.5 m Ah g^(-1)),suggesting its enhanced reaction kinetics and structural stability.In addition,it possesses an outstanding energy output of 368.4 Wh kg^(-1) at 387.8 W kg^(-1),which exceeds many of reported cathodes in ARZBs,providing new opportunities for the large-scale application of highperformance and low-cost ARZBs.

Schiff-base polymer derived FeCo-N-doped porous carbon flowers as bifunctional oxygen electrocatalyst for long-life rechargeable zinc-air batteries

Rational design and exploration of low-cost and robust bifunctional oxygen electrocatalysts are vitally important for developing high-performance zinc-air batteries(ZABs).Herein,we reported a facile yet cost-efficient approach to construct a bifunctional oxygen reduction reaction(ORR)/oxygen evolution reaction(OER)electrocatalyst composed of N-doped porous carbon nanosheet flowers decorated with Fe Co nanoparticles(Fe Co/N-CF).Rational design of this catalyst is achieved by designing Schiff-base polymer with unique molecular structure via hydrogen bonding of cyanuramide and terephthalaldehyde polycondensate in the presence of metal cations.It exhibits excellent activity and stability for electrocatalysis of ORR/OER,enabling ZAB with a high peak power density of 172 m W cm^(-2)and a large specific capacity of 811 m A h g^(-1)Znat large current.The rechargeable ZAB demonstrates excellent durability for 1000 h with slight voltage decay,far outperforming a couple of precious Pt/Ir-based catalysts.Density functional theory(DFT)calculations reveal that high activity of bimetallic Fe Co stems from enhanced O_(2)and OH-adsorption and accelerated O_(2)dissociation by OAO bond activation.

An efficient Hauser-base electrolyte for rechargeable magnesium batteries

Rechargeable magnesium batteries(RMBs)are considered the promising candidates for post lithium-ion batteries due to the abundant storage,high capacity,and dendrite-rare characteristic of Mg anode.However,the lack of practical electrolytes impedes the development and application of RMBs.Here,through a one-step reaction of LiCl congenital-containing Knochel–Hauser base TMPL(2,2,6,6-tetrame thylpiperidinylmagnesium chloride lithium chloride complex)with Lewis acid AlCl_(3),we successfully synthesized an efficient amino-magnesium halide TMPLA electrolyte.Raman and mass spectroscopy identified that the electrolyte comprises the typical di-nuclear copolymer[Mg_(2)Cl_(3)·6THF]+cation group and[(TMP)2AlCl_(2)]-anion group,further supported by the results of density functional theory calculations(DFT)and the Molecular dynamics(MD)simulations.The TMPLA electrolyte exhibits promising electrochemical performance,including available anodic stability(>2.65 V vs.SS),high ionic conductivity(6.05mS cm^(-1)),and low overpotential(<0.1 V)as well as appropriate Coulombic efficiency(97.3%)for Mg plating/stripping.Both the insertion Mo6S8cathode and conversion Cu S cathode delivered a desirable electrochemical performance with high capacity and good cycling stability based on the TMPLA electrolyte.In particular,when compatible with low cost and easily synthesized Cu S,the Cu S||Mg cell displayed an extremely high discharge capacity of 458.8 mAh g^(-1)for the first cycle and stabilized at 170.2 mAh g^(-1)with high Coulombic efficiency(99.1%)after 50 cycles at 0.05 C.Our work proposes an efficient electrolyte with impressive compatibility with Mg anode and insertion/conversion cathode for practical RMBs and provides a more profound knowledge of the Lewis acid–base reaction mechanisms.

CoSnO_(3)/C nanocubes with oxygen vacancy as high-capacity cathode materials for rechargeable aluminum batteries

Rechargeable aluminum batteries(RABs)are attractive cadidates for next-generation energy storage and conversion,due to the low cost and high safety of Al resources,and high capacity of metal Al based on the three-electrons reaction mechanism.However,the development of RABs is greatly limited,because of the lack of advanced cathode materials,and their complicated and unclear reaction mechanisms.Exploring the novel nanostructured transition metal and carbon composites is an effective route for obtaining ideal cathode materials.In this work,we synthesize porous CoSnO_(3)/C nanocubes with oxygen vacancies for utilizing as cathodes in RABs for the first time.The intrinsic structure stability of the mixed metal cations and carbon coating can improve the cycling performance of cathodes by regulating the internal strains of the electrodes during volume expansion.The nanocubes with porous structures contribute to fast mass transportation which improves the rate capability.In addition to this,abundant oxygen vacancies promote the adsorption affinity of cathodes,which improves storage capacity.As a result,the CoSnO_(3)/C cathodes display an excellent reversible capacity of 292.1 mAh g^(-1) at 0.1 A g^(-1),a good rate performance with 109 mAh g^(-1) that is maintained even at 1 A g^(-1) and the provided stable cycling behavior for 500 cycles.Besides,a mechanism of intercalation of Al^(3+)within CoSnO_(3)/C cathode is proposed for the electrochemical process.Overall,this work provides a step toward the development of advanced cathode materials for RABs by engineering novel nanostructured mixed transition-metal oxides with carbon composite and proposes novel insights into chemistry for RABs.