This experimental study aims at the reuse of recycled aggregates (RA), resulting from the demolition of concrete, cement block and cement mortar, in the manufacture of common construction in Burkina Faso. The RA can r...This experimental study aims at the reuse of recycled aggregates (RA), resulting from the demolition of concrete, cement block and cement mortar, in the manufacture of common construction in Burkina Faso. The RA can readily replace natural aggregates in concrete. Then five formulations of natural and recycled aggregates based concrete for characteristic strength of 25 Mpa were prepared in addition to the natural aggregates base concrete named reference concrete (BN): two types of recycled aggregates concrete (BR), three types of recycles and natural combined aggregates base concrete (BC). The properties of natural and recycled aggregates were characterized and the physical, mechanical strength and durability properties were also evaluated for all concrete specimens. All the studied concrete formulation present a density between 2000 kg/m<sup>3</sup> ≤ ρ ≥ 2600 kg/m<sup>3</sup> and an average slump of 4.9 ± 0.1 cm. The obtained results indicate that the recycled aggregates are suitable for current concrete. Two out of the five combinations studied, such as the natural (BN) and combined aggregate (BC2) based concretes satisfy the mechanical characteristics (Rc<sub>28</sub> > 25 MPa) at 28 days of age and an average absorption coefficient of 2.93% and 3.98%. The recycled aggregate based concrete (BR1, BR2) and combined aggregate based concrete (BC1), gave respective average compressive strength of 21.55 MPa, 20.50 MPa and 20.30 MPa, i.e. a difference of 13.80% to 18.80% under the characteristic strength (25 MPa) aimed at 28 days of age. Thus, the recycled aggregates are in conformity with the normative prescriptions and their use for standard concrete gives adequate physical, mechanical and durability properties for the production of the C20/25 concrete series in the common civil engineering applications.展开更多
In 2007,over 24 million tons of Construction and Demolition(C&D) wastes were generated in Hong Kong.Since the local landfills will be saturated in about 6 years,it is important to find a viable way to reuse these ...In 2007,over 24 million tons of Construction and Demolition(C&D) wastes were generated in Hong Kong.Since the local landfills will be saturated in about 6 years,it is important to find a viable way to reuse these waste materials as to alleviate the demand on public fill capacity.In order to tackle the problem,the Hong Kong government has set up a temporary recycling facility in Hong Kong in 2002 for producing different sizes of recycled aggregate for use in various construction materials.The Hong Kong Polytechnic University has been studying the feasible use of recycled aggregates in Hong Kong for a number of years.A substantial amount of experimental results on the properties of recycled aggregates and the effect of recycled aggregates on the properties of concrete and other construction products(e.g.concrete blocks and granular sub-base) has been published.In this paper,the experience of Hong Kong in using recycled aggregates are summarized and a set of quality control guidelines proposed for governing the use of recycled aggregates in Hong Kong is introduced.The experience and guidelines may also be useful for the recycling of waste materials derived from the recent Sichuan earthquake in China.展开更多
In some cases of emergency backfill engineering projects, traditional backfill materials cannot meet the requirements of fast construction due to their long curing time. This study presents a new kind of rapid hardeni...In some cases of emergency backfill engineering projects, traditional backfill materials cannot meet the requirements of fast construction due to their long curing time. This study presents a new kind of rapid hardening controlled low strength material, which utilizes both rapid hardening sulphoaluminate cement and recycled fine aggregate from urban red brick construction waste. Totally, sixteen mixtures were prepared for the experiment with different cement-to-sand ratios and water-to-solid ratios. The flowability and bleeding rate of fresh mixture were measured to evaluate its workability, and the compressive strength of hardened mixture was tested to evaluate its rapid hardening and mechanical properties. Test results indicate that rapid hardening controlled low strength material containing recycled fine aggregate from urban red brick construction waste can achieve the desirable flowability, but the bleeding rate increases with the increase of flowability. In addition, 2-hour compressive strength can reach 0.08 - 0.12 MPa, and 4-hour compressive strength is 0.32 - 1.54 MPa, which can meet the requirements of emergency backfill construction. At last, based on the derived compressive strength, a fitting model for predicting compressive strength evolution of this new rapid hardening backfill material is developed, which fits accurately with these experimental data.展开更多
Coarse and fine aggregate constitutes an average of approximately 55% to 80% of the total volume of concrete materials.Concrete remains the most commonly-used building material worldwide.As a result,the massive use of...Coarse and fine aggregate constitutes an average of approximately 55% to 80% of the total volume of concrete materials.Concrete remains the most commonly-used building material worldwide.As a result,the massive use of aggregate will have a direct impact on the earth′s natural resources if an appropriate replacement material is not found,violating the spirit of sustainable development.This study makes a preliminary examination of using coarse and fine aggregate produced from discarded construction materials in concrete.Results indicate that the compressive strength of densified mixture concrete at 28 days can reach 56.88 MPa(recycled materials used as coarse aggregate,and natural sand used as fine aggregate)and 53.33 MPa(recycled materials used as both coarse and fine aggregate).While this type of material is not yet fully understood,further research into this area should enable feasible applications in concrete.However,unsuitable mixtures have serious impact on the durability and overall economy of concrete.Pending further research on suitable mixture designs,a complete application of recycled aggregate in concrete can be expected.展开更多
The needs of the construction sector are still increasing for concrete. However the shortage of natural resources of aggregate could be a problem for the concrete industry. In addition, the negative impact on the envi...The needs of the construction sector are still increasing for concrete. However the shortage of natural resources of aggregate could be a problem for the concrete industry. In addition, the negative impact on the environment is due to the construction demolition;where disposal wastes create a severe ecological and environmental hazard. In the last decade, a major interest has been developed for the reuse of recycled aggregates that present more than 70% of the concrete volume. The reused products should fulfill the requirements of lower cost and better quality, in order to establish its role in the concrete. The aim of this study is to assess the effect of the local admixtures on the mechanical behavior of recycled aggregate concrete (RAC). Physical and mechanical properties of RAC were investigated including density, compressive and flexural strength. The non-destructive test methods (NDT: pulse-velocity and rebound hammer) were used to determine the concrete strength. The results obtained were compared with crushed aggregate concrete (CAC) using the normal compressive testing machine test method. Thus, the convenience of indirect tests in the case of a recycled aggregate concrete were demonstrated.展开更多
In an earlier study, a comprehensive and critical review of previous investigations into the assessment of the strength of concrete incorporating aggregates from demolished wastes was conducted and it was concluded th...In an earlier study, a comprehensive and critical review of previous investigations into the assessment of the strength of concrete incorporating aggregates from demolished wastes was conducted and it was concluded that there was a stark absence of results from the South African sub-continent including Botswana. In the present study, recycled coarse aggregates (RCA) sourced from demolished wastes collected from a landfill site in Gaborone, Botswana was used in lieu of natural coarse aggregates for the manufacture of concrete. With reference to the natural coarse aggregate, RCA replacement levels of 0%, 20%, 40%, 60%, 80% and 100% were utilized and the results of hardened concrete tests for compressive and flexural strengths were obtained. It was found that in general the compressive and flexural strengths of the recycled aggregate concrete (RAC) decreased with increasing replacement levels of natural coarse aggregates using RCA. It was concluded that RCA could be employed as a substitute for natural aggregate in concrete only up to a certain limit or partial replacement. In this respect, it was also noted that the undesirable properties of RCA were primarily due to the quantity and quality of the adhering mortar.展开更多
Microwave heating,which is used for pre-treatment of concrete before it is comminuted,stands as a strong candidate for selective liberation of multiphase materials like concrete.This paper is concerned with the select...Microwave heating,which is used for pre-treatment of concrete before it is comminuted,stands as a strong candidate for selective liberation of multiphase materials like concrete.This paper is concerned with the selective liberation of concrete's raw constituents(particularly aggregate)for recycling by considering the water content of concrete as a parameter of microwave heating for the first time.The deterioration law of the concrete's performance was characterized by the variation in the splitting tensile strength and relative dynamic modulus after heating by microwave at different water contents.Besides,tests were conducted to evaluate the performance of the interface transition zone(ITZ)between aggregate and mortar as well as to investigate the reasons for the stripping behavior of aggregate-mortar,which included the interface tensile strength test,temperature measurement,and porosity test.The deterioration law of splitting tensile strength and relative dynamic modulus revealed that the performance of concrete was subject to different degrees of damage depending on the water content.Furthermore,experimental results showed that interface bonding strength between aggregate and mortar was dramatically impaired,and a large temperature difference was generated between the aggregate and mortar during microwave heating.Meanwhile,the permeable pores increased considerably even when the specimens were dried.In the presence of water,the intactness of ITZ between aggregate and mortar was destroyed by microwave heating,and its performance was significantly lowered,which led to the occurrence of stripping behavior between aggregate and mortar.This was reaffirmed by the microstructure presented by scanning electron microscopy.Thus,the newly developed microwave pretreatment improved by providing appropriate water contents for concrete corresponding to different strength grades is a promising method for recycling aggregate from waste concrete.展开更多
In recent decades,the utilization of waste tires,plastic and artificial shale ceramsite as alternative fine aggregate to make self-compacting concrete(SCC)has been recognized as an eco-friendly and sustainable method ...In recent decades,the utilization of waste tires,plastic and artificial shale ceramsite as alternative fine aggregate to make self-compacting concrete(SCC)has been recognized as an eco-friendly and sustainable method to manufacture renewable construction materials.In this study,three kinds of recycled aggregates:recycled tire rubber particles,wood-plastic particles,artificial shale ceramsite were used to replace the sand by different volume(5%,10%,20%and 30%),and their effects on the fresh and hardened properties of SCC were investigated.The slump flow and V-funnel tests were conducted to evaluate the fresh properties of modified-SCC mixtures.The hardened properties include 3,7 and 28-day compressive strengths,axial compressive strength,static elastic modulus,and compressive stress-strain behavior at 28 days.The test results showed that the incorporation of these three kinds of alternative aggregates had a negative impact on the fresh properties of SCC.Besides,the 28-day compressive strength and axial compressive strength decreased with the increase of rubber and wood-plastic particles content.In this experiment,all the three kinds of recycled aggregates can improve the ductility and deformability of SCC,and the most excellent performance comes from SCC with recycled rubber particles.展开更多
Part of an extensive research undertaken by the Concrete and Masonry Research Group at Kingston University-London was reported to demonstrate through scientific research and full-scale site trials,that quality recycle...Part of an extensive research undertaken by the Concrete and Masonry Research Group at Kingston University-London was reported to demonstrate through scientific research and full-scale site trials,that quality recycled concrete aggregates can be produced and can be used successfully in a range of concrete applications.The effects of up to 100% coarse recycled concrete aggregate(RCA) on fresh,engineering and durability related properties were established and assessed its suitability for use in a rage of sustainable applications.展开更多
Recycled concrete aggregate(RCA)derived from demolition waste has been widely explored for use in civil engineering applications.One of the promising strategies globally is to incorporate RCA into concrete products.Ho...Recycled concrete aggregate(RCA)derived from demolition waste has been widely explored for use in civil engineering applications.One of the promising strategies globally is to incorporate RCA into concrete products.However,the use of RCA in high-performance concrete,such as self-consolidating concrete(SCC),has only been studied in the past decade.This paper summarizes recent publications on the use of coarse and/or fine RCA in SCC.As expected,the high-water absorption and porous structure of RCA have posed challenges in producing a high-fluidity mixture.According to an analysis of published data,a lower strength reduction(within 23%regardless of coarse RCA content)is observed in SCC compared with vibrated concrete,possibly due to the higher paste content in the SCC matrix,which enhances the weak surface layer of RCA and interfacial transition zone.Similarly,SCC tends to become less durable with RCA substitution although the deterioration can be minimized by using treated RCA through removing or strengthening the adhered mortar.To date,the information reported on the role of RCA in the long-term performance of SCC is still limited;thus,a wide range of research is needed to demonstrate the feasibility of RCA–SCC in field applications.展开更多
Japan lacked resources is a large import country and also a large consuming country.So it is turned society structure system of consumption goods stocked in domestic,which leads to 450 millions ton waste material.Rece...Japan lacked resources is a large import country and also a large consuming country.So it is turned society structure system of consumption goods stocked in domestic,which leads to 450 millions ton waste material.Recently,because of continuing development of intermediate handling and recycled utilization technology,finally disposed waste materials approximately 30 millions ton.The quantity of concrete product is consumed 300 millions ton per year unprecedented,beau case of large scope,it is expected valid and large absorption industry of recycled material. The purpose of this paper is to do a report on applied present status and future assignment of recycled material and building structure in Japan.展开更多
The use of fine recycled aggregates as raw material in the production of mortars appears as a good alternative to minimize waste disposal, so as to reduce natural resources consumption and to find and supply suitable ...The use of fine recycled aggregates as raw material in the production of mortars appears as a good alternative to minimize waste disposal, so as to reduce natural resources consumption and to find and supply suitable substitutes for natural aggregates. However, the use of this alternative material in a safe way must be carried out by a wide investigation of its long term behavior. In this way, this paper will examine the mechanical strength, physical properties and drying shrinkage of mortar, which use recycled fine aggregates that have originated from construction and demolition waste (CDW) containing mortar (55%), ceramic (26%) and concrete (16%). Two natural mortars, made with natural sand, were produced with cement/sand ratios of 1:4 and 1:8 (by weight) and a fixed consistency index of 260 +10 mm. Recycled mortar was produced with 50% of substitution rate, in volume, of natural aggregate by recycled one. Results show that recycled mortars present higher total porosity, absorption rate and drying shrinkage than reference mortar.展开更多
文摘This experimental study aims at the reuse of recycled aggregates (RA), resulting from the demolition of concrete, cement block and cement mortar, in the manufacture of common construction in Burkina Faso. The RA can readily replace natural aggregates in concrete. Then five formulations of natural and recycled aggregates based concrete for characteristic strength of 25 Mpa were prepared in addition to the natural aggregates base concrete named reference concrete (BN): two types of recycled aggregates concrete (BR), three types of recycles and natural combined aggregates base concrete (BC). The properties of natural and recycled aggregates were characterized and the physical, mechanical strength and durability properties were also evaluated for all concrete specimens. All the studied concrete formulation present a density between 2000 kg/m<sup>3</sup> ≤ ρ ≥ 2600 kg/m<sup>3</sup> and an average slump of 4.9 ± 0.1 cm. The obtained results indicate that the recycled aggregates are suitable for current concrete. Two out of the five combinations studied, such as the natural (BN) and combined aggregate (BC2) based concretes satisfy the mechanical characteristics (Rc<sub>28</sub> > 25 MPa) at 28 days of age and an average absorption coefficient of 2.93% and 3.98%. The recycled aggregate based concrete (BR1, BR2) and combined aggregate based concrete (BC1), gave respective average compressive strength of 21.55 MPa, 20.50 MPa and 20.30 MPa, i.e. a difference of 13.80% to 18.80% under the characteristic strength (25 MPa) aimed at 28 days of age. Thus, the recycled aggregates are in conformity with the normative prescriptions and their use for standard concrete gives adequate physical, mechanical and durability properties for the production of the C20/25 concrete series in the common civil engineering applications.
文摘In 2007,over 24 million tons of Construction and Demolition(C&D) wastes were generated in Hong Kong.Since the local landfills will be saturated in about 6 years,it is important to find a viable way to reuse these waste materials as to alleviate the demand on public fill capacity.In order to tackle the problem,the Hong Kong government has set up a temporary recycling facility in Hong Kong in 2002 for producing different sizes of recycled aggregate for use in various construction materials.The Hong Kong Polytechnic University has been studying the feasible use of recycled aggregates in Hong Kong for a number of years.A substantial amount of experimental results on the properties of recycled aggregates and the effect of recycled aggregates on the properties of concrete and other construction products(e.g.concrete blocks and granular sub-base) has been published.In this paper,the experience of Hong Kong in using recycled aggregates are summarized and a set of quality control guidelines proposed for governing the use of recycled aggregates in Hong Kong is introduced.The experience and guidelines may also be useful for the recycling of waste materials derived from the recent Sichuan earthquake in China.
文摘In some cases of emergency backfill engineering projects, traditional backfill materials cannot meet the requirements of fast construction due to their long curing time. This study presents a new kind of rapid hardening controlled low strength material, which utilizes both rapid hardening sulphoaluminate cement and recycled fine aggregate from urban red brick construction waste. Totally, sixteen mixtures were prepared for the experiment with different cement-to-sand ratios and water-to-solid ratios. The flowability and bleeding rate of fresh mixture were measured to evaluate its workability, and the compressive strength of hardened mixture was tested to evaluate its rapid hardening and mechanical properties. Test results indicate that rapid hardening controlled low strength material containing recycled fine aggregate from urban red brick construction waste can achieve the desirable flowability, but the bleeding rate increases with the increase of flowability. In addition, 2-hour compressive strength can reach 0.08 - 0.12 MPa, and 4-hour compressive strength is 0.32 - 1.54 MPa, which can meet the requirements of emergency backfill construction. At last, based on the derived compressive strength, a fitting model for predicting compressive strength evolution of this new rapid hardening backfill material is developed, which fits accurately with these experimental data.
文摘Coarse and fine aggregate constitutes an average of approximately 55% to 80% of the total volume of concrete materials.Concrete remains the most commonly-used building material worldwide.As a result,the massive use of aggregate will have a direct impact on the earth′s natural resources if an appropriate replacement material is not found,violating the spirit of sustainable development.This study makes a preliminary examination of using coarse and fine aggregate produced from discarded construction materials in concrete.Results indicate that the compressive strength of densified mixture concrete at 28 days can reach 56.88 MPa(recycled materials used as coarse aggregate,and natural sand used as fine aggregate)and 53.33 MPa(recycled materials used as both coarse and fine aggregate).While this type of material is not yet fully understood,further research into this area should enable feasible applications in concrete.However,unsuitable mixtures have serious impact on the durability and overall economy of concrete.Pending further research on suitable mixture designs,a complete application of recycled aggregate in concrete can be expected.
文摘The needs of the construction sector are still increasing for concrete. However the shortage of natural resources of aggregate could be a problem for the concrete industry. In addition, the negative impact on the environment is due to the construction demolition;where disposal wastes create a severe ecological and environmental hazard. In the last decade, a major interest has been developed for the reuse of recycled aggregates that present more than 70% of the concrete volume. The reused products should fulfill the requirements of lower cost and better quality, in order to establish its role in the concrete. The aim of this study is to assess the effect of the local admixtures on the mechanical behavior of recycled aggregate concrete (RAC). Physical and mechanical properties of RAC were investigated including density, compressive and flexural strength. The non-destructive test methods (NDT: pulse-velocity and rebound hammer) were used to determine the concrete strength. The results obtained were compared with crushed aggregate concrete (CAC) using the normal compressive testing machine test method. Thus, the convenience of indirect tests in the case of a recycled aggregate concrete were demonstrated.
文摘In an earlier study, a comprehensive and critical review of previous investigations into the assessment of the strength of concrete incorporating aggregates from demolished wastes was conducted and it was concluded that there was a stark absence of results from the South African sub-continent including Botswana. In the present study, recycled coarse aggregates (RCA) sourced from demolished wastes collected from a landfill site in Gaborone, Botswana was used in lieu of natural coarse aggregates for the manufacture of concrete. With reference to the natural coarse aggregate, RCA replacement levels of 0%, 20%, 40%, 60%, 80% and 100% were utilized and the results of hardened concrete tests for compressive and flexural strengths were obtained. It was found that in general the compressive and flexural strengths of the recycled aggregate concrete (RAC) decreased with increasing replacement levels of natural coarse aggregates using RCA. It was concluded that RCA could be employed as a substitute for natural aggregate in concrete only up to a certain limit or partial replacement. In this respect, it was also noted that the undesirable properties of RCA were primarily due to the quantity and quality of the adhering mortar.
基金the financial support from the open project funds for National Major Science and Technology Infrastructure of Materials Service Safety Assessment Facilities,China(MSAF-2020-106)the National Natural Science Foundation of China(No.51808051)。
文摘Microwave heating,which is used for pre-treatment of concrete before it is comminuted,stands as a strong candidate for selective liberation of multiphase materials like concrete.This paper is concerned with the selective liberation of concrete's raw constituents(particularly aggregate)for recycling by considering the water content of concrete as a parameter of microwave heating for the first time.The deterioration law of the concrete's performance was characterized by the variation in the splitting tensile strength and relative dynamic modulus after heating by microwave at different water contents.Besides,tests were conducted to evaluate the performance of the interface transition zone(ITZ)between aggregate and mortar as well as to investigate the reasons for the stripping behavior of aggregate-mortar,which included the interface tensile strength test,temperature measurement,and porosity test.The deterioration law of splitting tensile strength and relative dynamic modulus revealed that the performance of concrete was subject to different degrees of damage depending on the water content.Furthermore,experimental results showed that interface bonding strength between aggregate and mortar was dramatically impaired,and a large temperature difference was generated between the aggregate and mortar during microwave heating.Meanwhile,the permeable pores increased considerably even when the specimens were dried.In the presence of water,the intactness of ITZ between aggregate and mortar was destroyed by microwave heating,and its performance was significantly lowered,which led to the occurrence of stripping behavior between aggregate and mortar.This was reaffirmed by the microstructure presented by scanning electron microscopy.Thus,the newly developed microwave pretreatment improved by providing appropriate water contents for concrete corresponding to different strength grades is a promising method for recycling aggregate from waste concrete.
基金the financial support from the National Natural Science Foundation of China,grant number 11772351Double Shield TBM Material Optimization and Supporting Technology Research-TBM Segment Rapid Support Scientific Research Project[contract NO:PM2017/D02]the National Key R&D Program of China(No.2018YFC0406604).
文摘In recent decades,the utilization of waste tires,plastic and artificial shale ceramsite as alternative fine aggregate to make self-compacting concrete(SCC)has been recognized as an eco-friendly and sustainable method to manufacture renewable construction materials.In this study,three kinds of recycled aggregates:recycled tire rubber particles,wood-plastic particles,artificial shale ceramsite were used to replace the sand by different volume(5%,10%,20%and 30%),and their effects on the fresh and hardened properties of SCC were investigated.The slump flow and V-funnel tests were conducted to evaluate the fresh properties of modified-SCC mixtures.The hardened properties include 3,7 and 28-day compressive strengths,axial compressive strength,static elastic modulus,and compressive stress-strain behavior at 28 days.The test results showed that the incorporation of these three kinds of alternative aggregates had a negative impact on the fresh properties of SCC.Besides,the 28-day compressive strength and axial compressive strength decreased with the increase of rubber and wood-plastic particles content.In this experiment,all the three kinds of recycled aggregates can improve the ductility and deformability of SCC,and the most excellent performance comes from SCC with recycled rubber particles.
文摘Part of an extensive research undertaken by the Concrete and Masonry Research Group at Kingston University-London was reported to demonstrate through scientific research and full-scale site trials,that quality recycled concrete aggregates can be produced and can be used successfully in a range of concrete applications.The effects of up to 100% coarse recycled concrete aggregate(RCA) on fresh,engineering and durability related properties were established and assessed its suitability for use in a rage of sustainable applications.
基金Financial support from the National Natural Science Foundation of China(Contract No.897201143)。
文摘Recycled concrete aggregate(RCA)derived from demolition waste has been widely explored for use in civil engineering applications.One of the promising strategies globally is to incorporate RCA into concrete products.However,the use of RCA in high-performance concrete,such as self-consolidating concrete(SCC),has only been studied in the past decade.This paper summarizes recent publications on the use of coarse and/or fine RCA in SCC.As expected,the high-water absorption and porous structure of RCA have posed challenges in producing a high-fluidity mixture.According to an analysis of published data,a lower strength reduction(within 23%regardless of coarse RCA content)is observed in SCC compared with vibrated concrete,possibly due to the higher paste content in the SCC matrix,which enhances the weak surface layer of RCA and interfacial transition zone.Similarly,SCC tends to become less durable with RCA substitution although the deterioration can be minimized by using treated RCA through removing or strengthening the adhered mortar.To date,the information reported on the role of RCA in the long-term performance of SCC is still limited;thus,a wide range of research is needed to demonstrate the feasibility of RCA–SCC in field applications.
文摘Japan lacked resources is a large import country and also a large consuming country.So it is turned society structure system of consumption goods stocked in domestic,which leads to 450 millions ton waste material.Recently,because of continuing development of intermediate handling and recycled utilization technology,finally disposed waste materials approximately 30 millions ton.The quantity of concrete product is consumed 300 millions ton per year unprecedented,beau case of large scope,it is expected valid and large absorption industry of recycled material. The purpose of this paper is to do a report on applied present status and future assignment of recycled material and building structure in Japan.
文摘The use of fine recycled aggregates as raw material in the production of mortars appears as a good alternative to minimize waste disposal, so as to reduce natural resources consumption and to find and supply suitable substitutes for natural aggregates. However, the use of this alternative material in a safe way must be carried out by a wide investigation of its long term behavior. In this way, this paper will examine the mechanical strength, physical properties and drying shrinkage of mortar, which use recycled fine aggregates that have originated from construction and demolition waste (CDW) containing mortar (55%), ceramic (26%) and concrete (16%). Two natural mortars, made with natural sand, were produced with cement/sand ratios of 1:4 and 1:8 (by weight) and a fixed consistency index of 260 +10 mm. Recycled mortar was produced with 50% of substitution rate, in volume, of natural aggregate by recycled one. Results show that recycled mortars present higher total porosity, absorption rate and drying shrinkage than reference mortar.