A Teaching Experiment in Modelling through Scale Reduction Methods： A Bridge to Later Trigonometric Methods

In a teaching experiment, Japanese Grade 9 students investigated how to measure the height of an aerial balloon using different models involving angles and distances, and also to evaluate the models they developed. As novices to mathematical modelling, they needed to decide which of several possible models were both valid and practicable, and the errors in measurement that are likely to arise. Opportunities to construct and use paper models, as scale reductions of the real situation, and discussing their results in small groups were effective in moving forward the thinking of many students on the dimensions mentioned above. While students were less able to identify different sources of errors, many came to appreciate the need to learn trigonometric techniques that are more suitable in dealing with problems of this kind.

EXPERIMENTAL STUDY ON UPGRADING OF A FINE-SCALED GRAPHITE ORE BY FLOTATION

Based on the quality and analysis of the medium carbon product whose grade was 81%-82%, the emphasis of the study was placed on the orthogonal experiments of roughing flotation reagent and single factors, such as abrasive grain, pulp concentration and the rotating speed of flotation machine. The result with improvement in the grade of concentrate to 95% through the routine floatation method was achieved.

The measuring method of early lateral energy fraction in the scale model experiments

This paper introduces a measuring method of early lateral energy fraction in the scale model experiments. According to the interference principle of half wave length making the high frequency figure-8 directional microphone. With the signal-processing technique, a receiving and analyzing system, for the measurements of lateral energy fraction in the scale model is realized.

Adjoint Sensitivity Experiments of a Meso-β-scale Vortex in the Middle Reaches of the Yangtze River

A relatively independent and small-scale heavy rainfall event occurred to the south of a slow eastwardmoving meso-α-scale vortex. The analysis shows that a meso-β-scale system is heavily responsible for the intense precipitation. An attempt to simulate it met with some failures. In view of its small scale, short lifetime and relatively sparse observations at the initial time, an adjoint model was used to examine the sensitivity of the meso-β-scale vortex simulation with respect to initial conditions. The adjoint sensitivity indicates how small perturbations of initial model variables anywhere in the model domain can influence the central vorticity of the vortex. The largest sensitivity for both the wind and temperature perturbation is located below 700 hPa, especially at the low level. The largest sensitivity for the water vapor perturbation is located below 500 hPa, especially at the middle and low levels. The horizontal adjoint sensitivity for all variables is mainly located toward the upper reaches of the Yangtze River with respect to the simulated meso-β-scale system in Hunan and Jiangxi provinces with strong locality. The sensitivity shows that warm cyclonic perturbations in the upper reaches can have a great effect on the development of the meso-β-scale vortex. Based on adjoint sensitivity, forward sensitivity experiments were conducted to identify factors influencing the development of the meso-β-scale vortex and to explore ways of improving the prediction. A realistic prediction was achieved by using adjoint sensitivity to modify the initial conditions and implanting a warm cyclone at the initial time in the upper reaches of the river with respect to the meso-β-scale vortex, as is commonly done in tropical cyclone prediction.

Analysis on nasal airway by using scale-adaptive simulation combined with standard κ-ω model and 3D printing modeling physical experiment

The physiological structure of the upper respiratory tract is complex and varies with each individual,and the circulating air has turbulent performance.In this paper,based on computed tomography(CT)medical images published online and the three-dimensional(3D)printing technology,a 3D model of the human upper respiratory tract was reconstructed and an experimental device of the upper respiratory tract was made.We implemented the respiratory experiment and measured the flow rate,and a scale-adaptive κ-ω model is applied for numerical simulation,the results are in good agreement.The flow field during respiratory was analyzed by coronal velocity cross section,vortex line and particle tracks.We found that the relatively strong shear effect happens at the areas of nasal valve and nasopharynx.In the middle and upper nasal tract,vortex line separation occurs and there is significant passage effect.The results indicate that SAS method is effective in studying upper respiratory airflow.

The idea and project of the “Medium－Scale Experiment Field for Earthquake Prediction”──Research on observations and applications of mining earthquake in Mentougou Coal Mine

A brief account of the development of the research on mining earthquakes and the general situation of the Mentougou Coal Mine medium scale experiment field for earthquake prediction and the project of monitor and prediction is given. The differences of waveforms between mining earthquakes and natural earthquakes is discussed. The magnitude frequency distribution of the 79 000 mining earthquakes of over M L1.0 from 1984 to 1995 is summarized . Finally, taking PH and PV, the principal compressive stress components of the focal mechanism of the mining earthquakes, as the criteria, analyses the stress background of the 12 large mining earthquakes.

Small Scale Field Experiment on Breaking Wave Pressure on Vertical Breakwaters

A small scale field experiment (SSFE) was performed on vertical breakwaters in the surf zone. The following are some of the findings. Wind seas may yield breaking wave pressure notwithstanding some large deepwater wave steepness, and small elevation of the wall above the mean water level. Caisson breakwaters can withstand some exceptionally high impulsive force peaks (even twice the weight in still water);whereas, with the same sea state and weight, a breakwater composed of layers of solid concrete blocks is destroyed.

EXPERIMENTAL STUDY ON REDUCING ADHESION IN COAL HOPPER BY SURFACE ELECTRO-OSMOSIS

The adhesion mechanics of coal and the behavior of the coal adhesion to the hopper are analyzed. A model coal hopper is developed, and the model experiments are made by using the surface electro osmosis technology according to the processing conditions. The parameters of the surface electro osmosis technology are optimized by the method of orthogonal polynomial regression designing. The result shows that the surface electro osmosis technique is one of the good methods to solve the adhering problem of coal to the coal hopper in transfer piping.

Some results of modeling D-D seismogenic pattern by the fracture model experiment of large-scale rock samples(I)

sing the natural limestone samples taken from the field with dimension of 500 mm×500 mm×1 000 mm, the D-D (dilatancy-diffusion) seismogeny pattern was modeled under the condition of water injection, which observes the time-space evolutionary features about the relative physics fields of the loaded samples from deformation, formation of microcracks to the occurrence of main rupture. The results of observed apparent resistivity show: ① The process of the deformation from microcrack to main rupture on the loaded rock sample could be characterized by the precursory spatial-temporal changes in the observation of apparent resistivity; ② The precursory temporal changes of observation in apparent resistivity could be divided into several stages, and its spatial distribution shows the difference in different parts of the rock sample; ③ Before the main rupture of the rock sample the obvious ″tendency anomaly′ and ′short-term anomaly″ were observed, and some of them could be likely considered as the ″impending earthquake ″anomaly precursor of apparent resistivity. The changes and distribution features of apparent resistivity show that they are intrinsically related to the dilatancy phenomenon of the loaded rock sample. Finally, this paper discusses the mechanism of resistivity change of loaded rock sample theoretically.

Density disturbance of small-scale fieldaligned irregularities in the ionosphere heating experiments

A theoretical model which describes the small-scale irregularities excited by powerful high frequency （3–30 MHz） electromagnetic wave in ionosphere heating is investigated quantitatively in this paper. The model is based on the transport equation in magnetic plasma and mode conversion from electromagnetic wave to electrostatic wave in ionospheric modification.Threshold electric field for exciting small-scale （meter scale） irregularities and spatial spectra of irregularities are analytically calculated by this model. The results indicate that background electron density and geomagnetic field play an important role for the threshold electric field and the spatial scale of the electron density irregularities. The results demonstrate that the electric field threshold increases with the decrease of the spatial scale of the irregularities. For exciting meter scale irregularities, the threshold electric field is about tens of mV m^（-1）. The theoretical results are consistent with those of the experiments.

Analysis on River Bed Changes in Weir Downstream by Real-Scale Experiment

Flood damage has aggravated recently owing to artificial structures in high flow rare areas such as small rivers, which can lead to secondary damage. In this regard, studies are required to examine the conventional design criteria formulas to secure the stability of structures such as weirs and drop structures. Although studies on the stability of these structures have been conducted through small-scale experiments, few empirical studies have investigated the hydraulic phenomena occurring near actual artificial structures. In this study, we fabricated real-size models of weir and drop structure at the Andong River Experiment Center and investigated the flow patterns around the structures by applying the particle image velocimetry analysis technique with a flow tracker. We also measured the scour length in the waterspout section when the structures are overflowing, and compared it with the values calculated using the formula. Consequently, as the supply flow increases, the result is different from the value calculated using the formula given in the existing design standard, and it is judged to be inappropriate for a small stream area with high flow rate. Thus, it is necessary to consider the design factors such as energy gradient and the flow amount per unit width into weir and drop structure as well as the existing design factors in designing an apron section for a weir and drop structure.

Overview of the South China Sea Monsoon Experiment

The present paper gives an overview of the key project ' South China Sea Monsoon Experiment (SCSMEX)' operated by the Ministry of Science and Technology of China during the period of 1996-2001. The SCSMEX is a joint atmospheric and oceanic field experiment which aims to better understand the onset, maintenance, and variability of the summer monsoon over the South China Sea (SCS). It is a large-scale international effort with many participating countries and regions cooperatively involved in this experiment. With the field observation in May-August 1998, a large amount of meteorological and oceanic data was acquired, which provides excellent datasets for the study of the SCS monsoon and the East Asian monsoon and their interaction with the ocean. The preliminary research achievements are as follows. (1) The earliest onset of the Asian monsoon over the SCS and Indo-China Peninsula has been well documented. Prom the viewpoint of the synoptic process, its onset is closely related to the early rapid development of a twin cyclone to the east of Sri Lanka. The conceptual modei of the SCS monsoon onset in 1998 was put forward. The 50-year time series of the SCS monsoon onset date was also made. (2) Two major modes, namely the 30-60-day and 10-20-day oscillations were ascertained. The influences of the abnormal SCS monsoon on the precipitation over eastern China and its modes were identifled. A strong (weak) monsoon over the SCS usually leads to less (more) precipitation over the middle and lower reaches of the Yangtze River basin, and more (less) precipitation in North China. (3) During the monsoon onset over the SCS, a wide variety of organized mesoscale convective systems (MCSs) were observed by a Doppler radar array deployed over the northern SCS. The relationship between large-scale circulations and MCSs during the monsoon onset process in 1998 was clearly revealed. It was suggested that there is a kind of positive feedback mechanism between large-scale circulations and MCSs. (4) The SST over the SCS during the early period influences the timing of the monsoon onset date and the monsoon's intensity. During the monsoon onset, the ocean undergoes a process of energy release through air-sea interaction. During the break phase of the SCS monsoon, the ocean demonstrates the process of energy re-accumulation. Obvious differences in the air-sea turbulent flux exchange between the southern and northern parts of the SCS due to different characteristic features of the atmosphere and sea structure were observed in those regions. (5) The verification of impact of intensive observations on the predictive performance is made by the use of regional models. The air-sea coupled regional climate modei (CRCM) was also developed under the SCSMEX Project . The simulation of the oceanic circulation in 1998 produced with the modei was well compared with the observations.

An Evaluation Scale of Medical Services Quality Based on “Patients' Experience”

An evaluation scale of medical services quality was developed on the basis of ＂patients＇ experience＂. The questionnaires were developed by, among others, searching relevant literature, col- lecting well-established assessment scales, measuring patients＇ experience and satisfaction, brain-storming, literature analysis. Delphi method was adopted for expert consultation. Scale items were screened and revised. The key indexes were converted. Field surveys were conducted for testing the reliability and validity of the scale. Our modified evaluation scale for measuring medical services quality based on ＂patients＇ experience＂ included 6 dimensions （tangibility, reliability, responsiveness, assurance, empathy and continuity）, and 50 items. The novel scale based on ＂patients＇ experience＂ may better serve the purpose of assessin~ medical services quality.

Experimental Study of Tunnel Fire with Natural Ventilation

The 1/15 reduced-scale experiments using Froude scaling were designed to study the effect on the smoke control efficiency for subway tunnel fires with natural ventilation mode.The propane gas fires with heat release rate 11.48 kW was used,which corresponds to the heat release rate 10 MW in the full-scale tunnel.The temperature distributions under the ceiling were measured by K-type thermocouples to investigate smoke movement,and the velocity of smoke in shafts was measured by hot-wire anemometer to obtain the smoke extract amount of ventilation shafts.The results show that the smoke temperature under the ceiling varies with the longitudinal different distance from fire source.The results also show that the smoke temperature distributions and the smoke control efficiency in tunnel vary with the space between ventilation shafts and vary with the area and the height of ventilation shaft.

Biomineralization of Uranium: A Simulated Experiment and Its Significance

A simulated experimental reduction of and the synthesis of uraninite by a sulfate-reducing bacteria, Desulfovibrio desulfuricans DSM 642, are first reported. The simulated physicochemical experimental conditions were: 35°C, pH=7.0-7.4, corresponding to the environments of formation of the sandstone-hosted interlayer oxidation-zone type uranium deposits in Xinjiang, NW China. Uraninite was formed on the surface of the host bacteria after a one-week's incubation. Therefore, sulfate-reducing bacteria, which existed extensively in Jurassic sandstone-producing environments, might have participated in the biomineralization of this uranium deposit. There is an important difference in the order- disorder of the crystalline structure between the uraninite produced by Desulfovibrio desulfuricans and naturally occurring uraninite. Long time and slow precipitation and growth of uraninite in the geological environment might have resulted in larger uraninite crystals, with uraninite nanocrystals arranged in order, whereas the experimentally produced uraninite is composed of unordered uraninite nanocrystals which, in contrast, result from the short time span of formation and rapid precipitation and growth of uraninite. The discovery has important implications for understanding genetic significance in mineralogy, and also indicates that in-situ bioremediation of U-contaminated environments and use of biotechnology in the treatment of radioactive liquid waste is being contemplated.

Reduced bit low power VLSI architectures for motion estimation

Low power and real time very large scale integration （VLSI） architectures of motion estimation （ME） algorithms for mobile devices and applications are presented. The power reduction is achieved by devising a novel correction recovery mechanism based on algorithms which allow the use of reduced bit sum of absolute difference （RBSAD） metric for calculating matching error and conversion to full resolution sum of absolute difference （SAD） metric whenever necessary. Parallel and pipelined architectures for high throughput of full search ME corresponding to both the full resolution SAD and the generalized RBSAD algorithm are synthe- sized using Xilinx Synthesis Tools （XST）, where the ME designs based on reduced bit （RB） algorithms demonstrate the reduction in power consumption up to 45% and/or the reduction in area up to 38%.

STUDY ON SIMULATION EXPERIMENT OF EQUIVALENT MATERIAL APPLIED IN COAL MINE

Based on simulation experiments of a number of scientific research items, the latest progress of experiment method and test technique about equivalent material simulation are introduced. The bevelopment of experiment technique makes analogy simulation evolve into quantitative research about support-surrounding rock relationship from qualitative experiment.From this, large scale stereoscopic simulation experiment is developed, which has never appeared in underground pressure research in China. The present mold specification is 3 - 6 m×2. 0 m ×1. 5 m.

Experimental Simulation Study of Smoke Flowing Properties in Running Train

Tbe experimental simulation has been performed to investigate the smoke flowing properties within the 1/5 reduced-scale model of a sleeping carriage. The velocity field of the running train on fire is simulated in a wind tunnel of the State Key Lab of Fire Science, USTC (University of Science & Technology of China). In this paper, the fire-smoking properties and the variation of the temperature field in the sleeping carriage are analyzed. This paper introduces the simulation method of reducedscale experiment about the running train and the analysis or the experimental data. It provides the basis of experiment for the running train’s fire-safety and full-scale experiment in the future study.

Evolution of crescent-shaped sand dune under the influence of injected sand flux:scaling law and wind tunnel experiment

This paper studies the evolution of crescent-shaped dune under the influence of injected flux. A scaling law and a wind tunnel experiment are carried out for comparison. The experiment incorporates a novel image processing algorithm to recover the evolutionary process. The theoretical and experimental results agree well in the middle stage of dune evolution, but deviate from each other in the initial and final stages, suggesting that the crescent-shaped dune evolution is intrinsically scale-variant and that the crescent shape breaks down under unsaturated condition.

Experiments on Large-Diameter Welded Hollow Spherical Joint

We experimented on welded hollow spherical joint of a stadium steel roof to investigate the stress and strain distributions on the surface of the joint and determine the ultimate bearing capacity. Then, finite element analysis was made to experimental results. When the test load was 140% of the design load, the stress at the bottom of the fourth wimble pipe reached the yield point. The experimental results agree with the analytical results well.