Model-based Predictive Control for Spatially-distributed Systems Using Dimensional Reduction Models

In this paper, a low-dimensional multiple-input and multiple-output （MIMO） model predictive control （MPC） configuration is presented for partial differential equation （PDE） unknown spatially-distributed systems （SDSs）. First, the dimension reduction with principal component analysis （PCA） is used to transform the high-dimensional spatio-temporal data into a low-dimensional time domain. The MPC strategy is proposed based on the online correction low-dimensional models, where the state of the system at a previous time is used to correct the output of low-dimensional models. Sufficient conditions for closed-loop stability are presented and proven. Simulations demonstrate the accuracy and efficiency of the proposed methodologies.

A Novel Big Data Storage Reduction Model for Drill Down Search

Multi-level searching is called Drill down search.Right now,no drill down search feature is available in the existing search engines like Google,Yahoo,Bing and Baidu.Drill down search is very much useful for the end user tofind the exact search results among the huge paginated search results.Higher level of drill down search with category based search feature leads to get the most accurate search results but it increases the number and size of thefile system.The purpose of this manuscript is to implement a big data storage reduction binaryfile system model for category based drill down search engine that offers fast multi-levelfiltering capability.The basic methodology of the proposed model stores the search engine data in the binaryfile system model.To verify the effectiveness of the proposedfile system model,5 million unique keyword data are stored into a binaryfile,thereby analysing the proposedfile system with efficiency.Some experimental results are also provided based on real data that show our storage model speed and superiority.Experiments demonstrated that ourfile system expansion ratio is constant and it reduces the disk storage space up to 30%with conventional database/file system and it also increases the search performance for any levels of search.To discuss deeply,the paper starts with the short introduction of drill down search followed by the discussion of important technologies used to implement big data storage reduction system in detail.

Two important properties in the new reduction model

Mean decision power （MDP） is an important criterion of a new reduction model, and relative decision power （RDP） and amount of rules （AR） are key parameters of MDP. This paper presents two important properties： relationship between RDP and AR, and relationship between MDP rule set of parent decision table and MDP rule set of child decision table. These properties can help better understanding of the new reduction model and are useful tools by which one can rapidly derive an MDP rule set.

Model reduction of fractional impedance spectra for time–frequency analysis of batteries, fuel cells, and supercapacitors

Joint time–frequency analysis is an emerging method for interpreting the underlying physics in fuel cells,batteries,and supercapacitors.To increase the reliability of time–frequency analysis,a theoretical correlation between frequency-domain stationary analysis and time-domain transient analysis is urgently required.The present work formularizes a thorough model reduction of fractional impedance spectra for electrochemical energy devices involving not only the model reduction from fractional-order models to integer-order models and from high-to low-order RC circuits but also insight into the evolution of the characteristic time constants during the whole reduction process.The following work has been carried out:(i)the model-reduction theory is addressed for typical Warburg elements and RC circuits based on the continued fraction expansion theory and the response error minimization technique,respectively;(ii)the order effect on the model reduction of typical Warburg elements is quantitatively evaluated by time–frequency analysis;(iii)the results of time–frequency analysis are confirmed to be useful to determine the reduction order in terms of the kinetic information needed to be captured;and(iv)the results of time–frequency analysis are validated for the model reduction of fractional impedance spectra for lithium-ion batteries,supercapacitors,and solid oxide fuel cells.In turn,the numerical validation has demonstrated the powerful function of the joint time–frequency analysis.The thorough model reduction of fractional impedance spectra addressed in the present work not only clarifies the relationship between time-domain transient analysis and frequency-domain stationary analysis but also enhances the reliability of the joint time–frequency analysis for electrochemical energy devices.

A Real-time Cutting Model Based on Finite Element and Order Reduction

Telemedicine plays an important role in Corona Virus Disease 2019(COVID-19).The virtual surgery simulation system,as a key component in telemedicine,requires to compute in real-time.Therefore,this paper proposes a realtime cutting model based on finite element and order reduction method,which improves the computational speed and ensure the real-time performance.The proposed model uses the finite element model to construct a deformation model of the virtual lung.Meanwhile,a model order reduction method combining proper orthogonal decomposition and Galerkin projection is employed to reduce the amount of deformation computation.In addition,the cutting path is formed according to the collision intersection position of the surgical instrument and the lesion area of the virtual lung.Then,the Bezier curve is adopted to draw the incision outline after the virtual lung has been cut.Finally,the simulation system is set up on the PHANTOM OMNI force haptic feedback device to realize the cutting simulation of the virtual lung.Experimental results show that the proposed model can enhance the real-time performance of telemedicine,reduce the complexity of the cutting simulation and make the incision smoother and more natural.

An Adaptive Substructure-Based Model Order Reduction Method for Nonlinear Seismic Analysis in OpenSees

Structural components may enter an initial-elastic state,a plastic-hardening state and a residual-elastic state during strong seismic excitations.In the residual-elastic state,structural components keep in an unloading/reloading stage that is dominated by a tangent stiffness,thus structural components remain residual deformations but behave in an elastic manner.It has a great potential to make model order reduction for such structural components using the tangent-stiffness-based vibration modes as a reduced order basis.In this paper,an adaptive substructure-based model order reduction method is developed to perform nonlinear seismic analysis for structures that have a priori unknown damage distribution.This method is able to generate time-varying substructures and make nonlinear model order reduction for substructures in the residual-elastic phase.The finite element program OpenSees has been extended to provide the adaptive substructure-based nonlinear seismic analysis.At the low level of OpenSees framework,a new abstract layer is created to represent the time-varying substructures and implement the modeling process of substructures.At the high level of OpenSees framework,a new transient analysis class is created to implement the solving process of substructure-based governing equations.Compared with the conventional time step integration method,the adaptive substructure-based model order reduction method can yield comparative results with a higher computational efficiency.

Advances of Model Order Reduction Research in Large-scale System Simulation

Model Order Reduction (MOR) plays more and more imp or tant role in complex system simulation, design and control recently. For example , for the large-size space structures, VLSI and MEMS (Micro-ElectroMechanical Systems) etc., in order to shorten the development cost, increase the system co ntrolling accuracy and reduce the complexity of controllers, the reduced order model must be constructed. Even in Virtual Reality (VR), the simulation and d isplay must be in real-time, the model order must be reduced too. The recent advances of MOR research are overviewed in the article. The MOR theor y and methods may be classified as Singular Value decomposition (SVD) based, the Krylov subspace based and others. The merits and demerits of the different meth ods are analyzed, and the existed problems are pointed out. Moreover, the applic ation’s fields are overviewed, and the potential applications are forecaste d. After the existed problems analyzed, the future work is described. There are som e problems in the traditional methods such as SVD and Krylov subspace, they are that it’s difficult to (1)guarantee the stability of the original system, (2) b e adaptive to nonlinear system, and (3) control the modeling accuracy. The f uture works may be solving the above problems on the foundation of the tradition al methods, and applying other methods such as wavelet or signal compression.

Statistical detection of structural damage based on model reduction

This paper proposes a statistical method for damage detection based on the finite element （FE） model reduction technique that utilizes measured modal data with a limited number of sensors. A deterministic damage detection process is formulated based on the model reduction technique. The probabilistie process is integrated into the deterministic damage detection process using a perturbation technique, resulting in a statistical structural damage detection method. This is achieved by deriving the first- and second-order partial derivatives of uncertain parameters, such as elasticity of the damaged member, with respect to the measurement noise, which allows expectation and covariance matrix of the uncertain parameters to be calculated. Besides the theoretical development, this paper reports numerical verification of the proposed method using a portal frame example and Monte Carlo simulation.

Model reduction and active control of flexible beam using internal balance technique

The internal balance technique is effective for the model reduction in flexible structures, especially the ones with dense frequencies. However, due to the difficulty in extracting the internal balance modal coordinates from the physical sensor readings, research on this topic has been mostly theoretical so far, and little has been done in experiments or engineering applications. This paper studies the internal balance method theoretically as well as experimentally and designs an active controller based on the reduction model. The research works on a digital signal processor （DSP） TMS320F2812- based experiment system with a flexible beam and proposes an approximate approach to access the internal balance modal coordinates. The simulation and test results have shown that the proposed approach is feasible and effective, and the designed controller is successful in restraining the beam vibration.

Frequency-domain generelaized singular peruturbation method for relative error model order reduction

A new mixed method for relative error model order reduction is proposed. In the proposed method the frequency domain balanced stochastic truncation method is improved by applying the generalized singular perturbation method to the frequency domain balanced system in the reduction procedure. The frequency domain balanced stochastic truncation method, which was proposed in [15] and [17] by the author, is based on two recently developed methods, namely frequency domain balanced truncation within a desired frequency bound and inner-outer factorization techniques. The proposed method in ttiis paper is a carry over of the frequency-domain balanced stochastic truncation and is of interest for practical model order reduction because in this context it shows to keep the accuracy of the approximation as high as possible without sacrificing the computational efficiency and important system properties. It is shown that some important properties of the frequency domain stochastic balanced reduction technique are extended to the proposed reduction method by using the concept and properties of the reciprocal systems. Numerical results show the accuracy, simplicity and flexibility enhancement of the method.

Stable Routh-Padé-type approximation in model reduction of interval systems

An interval Pade-type approximation is introduced and then Routh-Pade-type method （IRPTM） is presented to model reduction in interval systems. The denominator in reduced model is obtained from the stable Routh table, and its numerator is constructed by the interval Pade-type definition. Compared to the existing Routh-Pade method, IRPTM does not need to solve linear interval equations theoretical analysis shows that IRPTM has example is given to illustrate our method. Hence, we do not have to compute smaller computational cost than that interval division in the process. Moreover, of Routh-Pade method. A typical numerical

Model reduction using the genetic algorithmand routh approxi mations

A new method of model reduction combining the genetic algorithm（GA） with the Routh approximation method is presented. It is suggested that a high-order system can be approximated by a low-order model with a time delay. The denominator parameters of the reduced-order model are determined by the Routh approximation method, then the numerator parameters and time delay are identified by the GAL. The reduced-order models obtained by the proposed method will always be stable if the original system is stable and produce a good approximation to the original system in both the frequency domain and time domain. Two numerical examples show that the method is cornputationally simple and efficient.

Static output feedback stabilization for second-order singular systems using model reduction methods

In this paper,the static output feedback stabilization for large-scale unstable second-order singular systems is investigated.First,the upper bound of all unstable eigenvalues of second-order singular systems is derived.Then,by using the argument principle,a computable stability criterion is proposed to check the stability of secondorder singular systems.Furthermore,by applying model reduction methods to original systems,a static output feedback design algorithm for stabilizing second-order singular systems is presented.A simulation example is provided to illustrate the effectiveness of the design algorithm.

Model Order Reduction for Coupled Dynamic Characterization of Torsional Micromirrors

Numerical solutions could not perform rapid system-level simulation of the behavior of micro-electro-mechanical systems（MEMS） and analytic solutions for the describing partial differential equations are only available for simple geometries.Model order reduction（MOR） can extract approximate low-order model from the original large scale system.Conventional model order reduction algorithm is based on first-order system model,however,most structure mechanical MEMS systems are naturally second-order in time.For the purpose of solving the above problem,a direct second-order system model order reduction approach based on Krylov subspace projection for the coupled dynamic study of electrostatic torsional micromirrors is presented.The block Arnoldi process is applied to create the orthonormal vectors to construct the projection matrix,which enables the extraction of the low order model from the discretized system assembled through finite element analysis.The transfer functions of the reduced order model and the original model are expanded to demonstrate the moment-matching property of the second-order model reduction algorithm.The torsion and bending effect are included in the finite element model,and the squeeze film damping effect is considered as well.An empirical method considering relative error convergence is adopted to obtain the optimal choice of the order for the reduced model.A comparison research between the full model and the reduced model is carried out.The modeling accuracy and computation efficiency of the presented second-order model reduction method are confirmed by the comparison research results.The research provides references for MOR of MEMS.

Model Reduction Methods for High-Rise Buildings with Active Mass Damper Control Systems

To improve the performance of an active mass damper control system,the controller should be designed based on a reduced-order model. An improved method based on balanced truncation method was proposed to reduce the dimension of high-rise buildings,and was compared with other widely used reduction methods by using a framework with ten floors. This optimized method has improvement of reduction process and choice of the order. Based on the reduced-order model obtained by the improved method and pole-assignment algorithm,a controller was designed. Finally,a comparative analysis of structural responses,transfer functions,and poles was conducted on an actual high-rise building. The results show the effectiveness of the improved method.

A matrix Padé-type-Routh model reduction method for multivariable linear systems

In the present paper, the formulae for matrix Padé-type approximation were improved. The mixed model reduction method of matrix Padé-type-Routh for the multivariable linear systems was presented. A well-known example was given to illustrate that the mixed method is efficient.

Developing a GIS Audit Framework in the Context of Information Technology though a Reductive Model Approach

A GIS audit framework is necessary considering the diverse nature of GIS with regard to components, applications and industry. In practice, checklists are generated during the audit process based on specific objectives. There is no standardized list of items that can be used as a reference. The purpose of this study was to develop a GIS audit framework as a foundation for GIS audits. The framework provides that comprehensive approach to various GIS aspects during the audit process. The design builds on a developed conceptual framework where most significant categories of GIS audit parameters namely data quality, software utilization, GIS competency and procedures (work flows) were identified. The study adopted a reductive model approach to simplify the complexity associated with each category of GIS audit parameter. The resultant audit elements for each category are organized in a matrix that forms an integral part of the framework. The columns comprise audit goal, audit questions and audit subjects as indicators which are qualitatively measured. The rows comprise the parameters (data quality, software utilization, personnel competency and procedure (workflows)). To use the framework, an auditor only needs to create an audit checklist that consists of particular parameters and indicators from the framework depending on audit objective. As part of an on-going research, the next step will involve validating the framework through a mock testing process.

Multi-Objective Adaptive Optimization Model Predictive Control:Decreasing Carbon Emissions from a Zinc Oxide Rotary Kiln

The zinc oxide rotary kiln,as an essential piece of equipment in the zinc smelting industrial process,is presenting new challenges in process control.China’s strategy of achieving a carbon peak and carbon neutrality is putting new demands on the industry,including green production and the use of fewer resources;thus,traditional stability control is no longer suitable for multi-objective control tasks.Although researchers have revealed the principle of the rotary kiln and set up computational fluid dynamics(CFD)simulation models to study its dynamics,these models cannot be directly applied to process control due to their high computational complexity.To address these issues,this paper proposes a multi-objective adaptive optimization model predictive control(MAO-MPC)method based on sparse identification.More specifically,with a large amount of data collected from a CFD model,a sparse regression problem is first formulated and solved to obtain a reduction model.Then,a two-layered control framework including real-time optimization(RTO)and model predictive control(MPC)is designed.In the RTO layer,an optimization problem with the goal of achieving optimal operation performance and the lowest possible resource consumption is set up.By solving the optimization problem in real time,a suitable setting value is sent to the MPC layer to ensure that the zinc oxide rotary kiln always functions in an optimal state.Our experiments show the strength and reliability of the proposed method,which reduces the usage of coal while maintaining high profits.

Structural Model Updating of Jacket Platform by Control Theory Using Vibration Measurement Approach

The identification of variations in the dynamic behavior of structures is an important subject in structural integrity assessment.Improvement and servicing of offshore platforms in the marine environment with constant changing,requires understanding the real behavior of these structures to prevent possible failure.In this work,empirical and numerical models of jacket structure are investigated.A test on experimental modal analysis is accomplished to acquire the response of structure and a mathematical model of the jacket structure is also performed.Then,based on the control theory using developed reduction system,the matrices of the platform model is calibrated and updated.The current methodology can be applied to prepare the finite element model to be more adaptable to the empirical model.Calibrated results with the proposed approach in this paper are very close to those of the actual model and also this technique leads to a reduction in the amount of calculations and expenses.The research clearly confirms that the dynamic behavior of fixed marine structures should be designed and assessed considering the calibrated analytical models for the safety of these structures.

Research on the iterative method for model updating based on the frequency response function

Model reduction technique is usually employed in model updating process. In this paper, a new model updat- ing method named as cross-model cross-frequency response function （CMCF） method is proposed and a new iterative method associating the model updating method with the mo- del reduction technique is investigated. The new model up- dating method utilizes the frequency response function to avoid the modal analysis process and it does not need to pair or scale the measured and the analytical frequency re- sponse function, which could greatly increase the number of the equations and the updating parameters. Based on the traditional iterative method, a correction term related to the errors resulting from the replacement of the reduction ma- trix of the experimental model with that of the finite element model is added in the new iterative method. Comparisons be- tween the traditional iterative method and the proposed itera- tive method are shown by model updating examples of solar panels, and both of these two iterative methods combine the CMCF method and the succession-level approximate reduc- tion technique. Results show the effectiveness of the CMCF method and the proposed iterative method .