The conventional dynamic heterogeneous redundancy(DHR)architecture suffers from the security threats caused by the stability differences and similar vulnerabilities among the executors.To overcome these challenges,we ...The conventional dynamic heterogeneous redundancy(DHR)architecture suffers from the security threats caused by the stability differences and similar vulnerabilities among the executors.To overcome these challenges,we propose an intelligent DHR architecture,which is more feasible by intelligently combining the random distribution based dynamic scheduling algorithm(RD-DS)and information weight and heterogeneity based arbitrament(IWHA)algorithm.In the proposed architecture,the random distribution function and information weight are employed to achieve the optimal selection of executors in the process of RD-DS,which avoids the case that some executors fail to be selected due to their stability difference in the conventional DHR architecture.Then,through introducing the heterogeneity to restrict the information weights in the procedure of the IWHA,the proposed architecture solves the common mode escape issue caused by the existence of multiple identical error output results of similar vulnerabilities.The experimental results characterize that the proposed architecture outperforms in heterogeneity,scheduling times,security,and stability over the conventional DHR architecture under the same conditions.展开更多
Purpose–In response to the problem of insufficient traction/braking adhesion force caused by the existence of the third-body medium on the rail surface,this study aims to analyze the utilization of wheel-rail adhesio...Purpose–In response to the problem of insufficient traction/braking adhesion force caused by the existence of the third-body medium on the rail surface,this study aims to analyze the utilization of wheel-rail adhesion coefficient under different medium conditions and propose relevant measures for reasonable and optimized utilization of adhesion to ensure the traction/braking performance and operation safety of trains.Design/methodology/approach–Based on the PLS-160 wheel-rail adhesion simulation test rig,the study investigates the variation patterns of maximum utilized adhesion characteristics on the rail surface under different conditions of small creepage and large slip.Through statistical analysis of multiple sets of experimental data,the statistical distribution patterns of maximum utilized adhesion on the rail surface are obtained,and a method for analyzing wheel-rail adhesion redundancy based on normal distribution is proposed.The study analyzes the utilization of traction/braking adhesion,as well as adhesion redundancy,for different medium under small creepage and large slip conditions.Based on these findings,relevant measures for the reasonable and optimized utilization of adhesion are derived.Findings–When the third-body medium exists on the rail surface,the train should adopt the low-level service braking to avoid the braking skidding by extending the braking distance.Compared with the current adhesion control strategy of small creepage,adopting appropriate strategies to control the train’s adhesion coefficient near the second peak point of the adhesion coefficient-slip ratio curve in large slip can effectively improve the traction/braking adhesion redundancy and the upper limit of adhesion utilization,thereby ensuring the traction/braking performance and operation safety of the train.Originality/value–Most existing studies focus on the wheel-rail adhesion coefficient values and variation patterns under different medium conditions,without considering whether the rail surface with different medium can provide sufficient traction/braking utilized adhesion coefficient for the train.Therefore,there is a risk of traction overspeeding/braking skidding.This study analyzes whether the rail surface with different medium can provide sufficient traction/braking utilized adhesion coefficient for the train and whether there is redundancy.Based on these findings,relevant measures for the reasonable and optimized utilization of adhesion are derived to further ensure operation safety of the train.展开更多
In signal processing and communication systems,digital filters are widely employed.In some circumstances,the reliability of those systems is crucial,necessitating the use of fault tolerant filter implementations.Many ...In signal processing and communication systems,digital filters are widely employed.In some circumstances,the reliability of those systems is crucial,necessitating the use of fault tolerant filter implementations.Many strategies have been presented throughout the years to achieve fault tolerance by utilising the structure and properties of the filters.As technology advances,more complicated systems with several filters become possible.Some of the filters in those complicated systems frequently function in parallel,for example,by applying the same filter to various input signals.Recently,a simple strategy for achieving fault tolerance that takes advantage of the availability of parallel filters was given.Many fault-tolerant ways that take advantage of the filter’s structure and properties have been proposed throughout the years.The primary idea is to use structured authentication scan chains to study the internal states of finite impulse response(FIR)components in order to detect and recover the exact state of faulty modules through the state of non-faulty modules.Finally,a simple solution of Double modular redundancy(DMR)based fault tolerance was developed that takes advantage of the availability of parallel filters for image denoising.This approach is expanded in this short to display how parallel filters can be protected using error correction codes(ECCs)in which each filter is comparable to a bit in a standard ECC.“Advanced error recovery for parallel systems,”the suggested technique,can find and eliminate hidden defects in FIR modules,and also restore the system from multiple failures impacting two FIR modules.From the implementation,Xilinx ISE 14.7 was found to have given significant error reduction capability in the fault calculations and reduction in the area which reduces the cost of implementation.Faults were introduced in all the outputs of the functional filters and found that the fault in every output is corrected.展开更多
The 6-DOF manipulator provides a new option for traditional shipbuilding for its advantages of vast working space,low power consumption,and excellent flexibility.However,the rotation of the end effector along the tool...The 6-DOF manipulator provides a new option for traditional shipbuilding for its advantages of vast working space,low power consumption,and excellent flexibility.However,the rotation of the end effector along the tool axis is functionally redundant when using a robotic arm for five-axis machining.In the process of ship construction,the performance of the parts’protective coating needs to bemachined tomeet the Performance Standard of Protective Coatings(PSPC).The arbitrary redundancy configuration in path planning will result in drastic fluctuations in the robot joint angle,greatly reducing machining quality and efficiency.There have been some studies on singleobjective optimization of redundant variables,However,the quality and efficiency of milling are not affected by a single factor,it is usually influenced by several factors,such as the manipulator stiffness,the joint motion smoothness,and the energy consumption.To solve this problem,this paper proposed a new path optimization method for the industrial robot when it is used for five-axis machining.The path smoothness performance index and the energy consumption index are established based on the joint acceleration and the joint velocity,respectively.The path planning issue is formulated as a constrained multi-objective optimization problem by taking into account the constraints of joint limits and singularity avoidance.Then,the path is split into multiple segments for optimization to avoid the slow convergence rate caused by the high dimension.An algorithm combining the non-dominated sorting genetic algorithm(NSGA-II)and the differential evolution(DE)algorithm is employed to solve the above optimization problem.The simulations validate the effectiveness of the algorithm,showing the improvement of smoothness and the reduction of energy consumption.展开更多
Redundancy control can effectively enhance the stability and robustness of a system.Based on the conventional redundancy control switchover and majority arbitration strategy,this paper introduces the concept of hetero...Redundancy control can effectively enhance the stability and robustness of a system.Based on the conventional redundancy control switchover and majority arbitration strategy,this paper introduces the concept of heterogeneity and dynamics,constructs a dynamic heterogeneous redundancy-based microcontroller architecture DHR-MCU,and designs a fixed-leader distributed consensus algorithm that satisfies the program running state control of this architecture.The theoretical analysis and actual measurement of the prototype system prove that this architecture has good anti-attack and self-recovery capabilities under normal functions and performances and meets the general robust features in terms of safety and security.展开更多
A redundant-subspace-weighting(RSW)-based approach is proposed to enhance the frequency stability on a time scale of a clock ensemble.In this method,multiple overlapping subspaces are constructed in the clock ensemble...A redundant-subspace-weighting(RSW)-based approach is proposed to enhance the frequency stability on a time scale of a clock ensemble.In this method,multiple overlapping subspaces are constructed in the clock ensemble,and the weight of each clock in this ensemble is defined by using the spatial covariance matrix.The superimposition average of covariances in different subspaces reduces the correlations between clocks in the same laboratory to some extent.After optimizing the parameters of this weighting procedure,the frequency stabilities of virtual clock ensembles are significantly improved in most cases.展开更多
With the rapid development of information technology,IoT devices play a huge role in physiological health data detection.The exponential growth of medical data requires us to reasonably allocate storage space for clou...With the rapid development of information technology,IoT devices play a huge role in physiological health data detection.The exponential growth of medical data requires us to reasonably allocate storage space for cloud servers and edge nodes.The storage capacity of edge nodes close to users is limited.We should store hotspot data in edge nodes as much as possible,so as to ensure response timeliness and access hit rate;However,the current scheme cannot guarantee that every sub-message in a complete data stored by the edge node meets the requirements of hot data;How to complete the detection and deletion of redundant data in edge nodes under the premise of protecting user privacy and data dynamic integrity has become a challenging problem.Our paper proposes a redundant data detection method that meets the privacy protection requirements.By scanning the cipher text,it is determined whether each sub-message of the data in the edge node meets the requirements of the hot data.It has the same effect as zero-knowledge proof,and it will not reveal the privacy of users.In addition,for redundant sub-data that does not meet the requirements of hot data,our paper proposes a redundant data deletion scheme that meets the dynamic integrity of the data.We use Content Extraction Signature(CES)to generate the remaining hot data signature after the redundant data is deleted.The feasibility of the scheme is proved through safety analysis and efficiency analysis.展开更多
The feedback spring rod of the armature assembly is cancelled in the double redundance double nozzle flapper valve(DRDNFV),and the difficulty of valve core displacement control is increased.Therefore,this paper intend...The feedback spring rod of the armature assembly is cancelled in the double redundance double nozzle flapper valve(DRDNFV),and the difficulty of valve core displacement control is increased.Therefore,this paper intends to study the static characteristic of DRDNFV through the AMESet and AMESim simulation.It is explored under the circumstance of the fixed orifices being clogged and experimentally verified on the test bench.The results show that the pressure gain increases and the flow gain decreases with the increasing clogged degree of the fixed orifices on both sides.The zero bias increases synchronously with the increasing clogged degree of the unilateral fixed orifice.The experimental results are basically consistent with the theoretical curves and the theoretical correctness of the simulation model is effectively verified.The results can provide the theoretical reference for design,debugging,maintenance and fault diagnosis of DRDNFV.展开更多
The kinematic redundancy in a robot leads to an infinite number of solutions for inverse kinematics, which implies the possibility to select a 'best' solution according to an optimization criterion. In this pa...The kinematic redundancy in a robot leads to an infinite number of solutions for inverse kinematics, which implies the possibility to select a 'best' solution according to an optimization criterion. In this paper, two optimization objective functions are proposed, aiming at either minimizing extra degrees of freedom (DOFs) or minimizing the total potential energy of a multilink redundant robot. Physical constraints of either equality or inequality types are taken into consideration in the objective functions. Since the closed-form solutions do not exist in general for highly nonlinear and constrained optimization problems, we adopt and develop two numerical methods, which are verified to be effective and precise in solving the two optimization problems associated with the redundant inverse kinematics. We first verify that the well established trajectory following method can precisely solve the two optimization problems, but is computation intensive. To reduce the computation time, a sequential approach that combines the sequential quadratic programming and iterative Newton-Raphson algorithm is developed. A 4-DOF Fujitsu Hoap-1 humanoid robot arm is used as a prototype to validate the effectiveness of the proposed optimization solutions.展开更多
Structural redundancy elimination in case resource pools (CRP) is critical for avoiding performance bottlenecks and maintaining robust decision capabilities in cloud computing services. For these purposes, this pape...Structural redundancy elimination in case resource pools (CRP) is critical for avoiding performance bottlenecks and maintaining robust decision capabilities in cloud computing services. For these purposes, this paper proposes a novel approach to ensure redundancy elimination of a reasoning system in CRP. By using α entropy and mutual information, functional measures to eliminate redundancy of a system are developed with respect to a set of outputs. These measures help to distinguish both the optimal feature and the relations among the nodes in reasoning networks from the redundant ones with the elimination criterion. Based on the optimal feature and its harmonic weight, a model for knowledge reasoning in CRP (CRPKR) is built to complete the task of query matching, and the missing values are estimated with Bayesian networks. Moreover, the robustness of decisions is verified through parameter analyses. This approach is validated by the simulation with benchmark data sets using cloud SQL. Compared with several state-of-the-art techniques, the results show that the proposed approach has a good performance and boosts the robustness of decisions.展开更多
Wireless sensor networks (WSNs) consist of sensor nodes that broadcast a message within a network. Efficient broadcasting is a key requirement in sensor networks and has been a focal point of research over the last ...Wireless sensor networks (WSNs) consist of sensor nodes that broadcast a message within a network. Efficient broadcasting is a key requirement in sensor networks and has been a focal point of research over the last few years. There are many challenging tasks in the network, including redundancy control and sensor node localization that mainly depend on broadcasting. In this paper, we propose a broadcasting algorithm to control redundancy and improve localization (BACRIL) in WSNs. The proposed algorithm incorporates the benefits of the gossip protocol for optimizing message broadcasting within the network. Simulation results show a controlled level of redundancy, which is up to 57.6% if the number of sensor nodes deployed in a 500 m×500 m area are increased from 50 to 500.展开更多
Although it is common to eliminate the singularity of parallel mechanism by adding the branched chain with actuation redundancy, there is no theory and method for the configuration synthesis of the branched chain with...Although it is common to eliminate the singularity of parallel mechanism by adding the branched chain with actuation redundancy, there is no theory and method for the configuration synthesis of the branched chain with actuation redundancy in parallel mechanism. Branched chains with actuation redundancy are synthesized for eliminating interior singularity of 3-translational and 1-rotational(3T1R) parallel mechanisms. Guided by the discriminance method of hybrid screw group according to Grassmann line geometry, all the possibilities are listed for the occurrence of interior singularities in 3T1R parallel mechanism. Based on the linear relevance of screw system and the principles of eliminating parallel mechanism singularity with actuation redundancy, different types of branched chains with actuation redundancy are synthesized systematically to indicate the layout and the number of the branched chainsinterior with actuation redundancy. A general method is proposed for the configuration synthesis of the branched chains with actuation redundancy of the redundant parallel mechanism, and it builds a solid foundation for the subsequent performance optimization of the redundant actuation parallel mechanism.展开更多
This paper is a survey of the state-of-the-art knowledge in structural redundancy measure and its application. The existing deterministic and probabilistic measures of structural redundancy are summarized. Emphasis is...This paper is a survey of the state-of-the-art knowledge in structural redundancy measure and its application. The existing deterministic and probabilistic measures of structural redundancy are summarized. Emphasis is given to the discussion of their advantages and limitations. The application bf damage tolerance concept in the design and maintenance of marine structures is also reviewed. Some most critical problems in structural redundancy are proposed for future research.展开更多
This study provides new insights into the comparison of cable-stayed and extradosed bridges based on the safety assessment of their stay cables.These bridges are often regarded as identical structures owing to the use...This study provides new insights into the comparison of cable-stayed and extradosed bridges based on the safety assessment of their stay cables.These bridges are often regarded as identical structures owing to the use of inclined cables;however,the international standards for bridge design stipulate different safety factors for stay cables of both types of bridges.To address this misconception,a comparative study was carried out on the safety factors of stay cables under fatigue and ultimate limit states by considering the effects of various untoward and damaging factors,such as overloading,cable loss,and corrosion.The primary goal of this study is to describe the structural disparities between both types of bridges and evaluate their structural redundancies by employing deterministic and nondeterministic methods.To achieve this goal,three-dimensional finite-element models of both bridges were developed based on the current design guidelines for stay cables in Japan.After the balanced states of the bridge models were achieved,static analyses were performed for different safety factors of stay cables in a parametric manner.Finally,the first-order reliability method and Monte Carlo method were applied to determine the reliability index of stay cables.The analysis results show that cable-stayed and extradosed bridges exhibit different structural redundancies for different safety factors under the same loading conditions.Moreover,a significant increase in structural redundancy occurs with an incremental increase in the safety factors of stay cables.展开更多
The tracking, telemetry and command (TT&C) mission is extremely reliable for its characters of small time horizon and high redundancy. The combined forcing and failure biasing (CFFB) method that is usually used f...The tracking, telemetry and command (TT&C) mission is extremely reliable for its characters of small time horizon and high redundancy. The combined forcing and failure biasing (CFFB) method that is usually used for simulating the unreliability of the highly dependable mission system seems not so efficient for the TT&C mission. The concept about the importance of failure transition is proposed based on the logical relationship between TT&C mission and its involved resources. Then, the importance is used for readjusting the transition rate of the failure transition when using the forcing and failure biasing during the simulation. Examples show that the improved CFFB method can evidently increase the occurrence of the TT&C mission failure event and decrease the sample variance. More redundancy of the TT&C mission leads to the improved CFFB method more efficient.展开更多
Feature selection is an important problem in pattern classification systems. High dimension fisher criterion(HDF) is a good indicator of class separability. However, calculating the high dimension fisher ratio is di...Feature selection is an important problem in pattern classification systems. High dimension fisher criterion(HDF) is a good indicator of class separability. However, calculating the high dimension fisher ratio is difficult. A new feature selection method, called fisher-and-correlation (FC), is proposed. The proposed method is combining fisher criterion and correlation criterion based on the analysis of feature relevance and redundancy. The proposed methodology is tested in five different classification applications. The presented resuits confirm that FC performs as well as HDF does at much lower computational complexity.展开更多
In this paper, a new definition of structure system redundancy is proposed in view of the various measures for structure redundancy. By introducing the terms of structure system failure at the mechanism level and equi...In this paper, a new definition of structure system redundancy is proposed in view of the various measures for structure redundancy. By introducing the terms of structure system failure at the mechanism level and equivalent reliability index, the safety for existing offshore platforms can be evaluated by the semi-probabilistic method presented in this paper. Some numerical examples are given and satisfactory results have been obtained.展开更多
The study of optimization methods for reliability–redundancy allocation problems is a constantly changing field.New algorithms are continually being designed on the basis of observations of nature,wildlife,and humani...The study of optimization methods for reliability–redundancy allocation problems is a constantly changing field.New algorithms are continually being designed on the basis of observations of nature,wildlife,and humanity.In this paper,we review eight major evolutionary algorithms that emulate the behavior of civilization,ants,bees,fishes,and birds(i.e.,genetic algorithms,bee colony optimization,simulated annealing,particle swarm optimization,biogeography-based optimization,artificial immune system optimization,cuckoo algorithm and imperialist competitive algorithm).We evaluate the mathematical formulations and pseudo-codes of each algorithm and discuss how these apply to reliability–redundancy allocation problems.Results from a literature survey show the best results found for series,series–parallel,bridge,and applied case problems(e.g.,overspeeding gas turbine benchmark).Review of literature from recent years indicates an extensive improvement in the algorithm reliability performance.However,this improvement has been difficult to achieve for high-reliability applications.Insights and future challenges in reliability–redundancy allocation problems optimization are also discussed in this paper.展开更多
基金supported by the National Key Research and Development Program of China(2020YFE0200600)the National Natural Science Foundation of China(U22B2026)。
文摘The conventional dynamic heterogeneous redundancy(DHR)architecture suffers from the security threats caused by the stability differences and similar vulnerabilities among the executors.To overcome these challenges,we propose an intelligent DHR architecture,which is more feasible by intelligently combining the random distribution based dynamic scheduling algorithm(RD-DS)and information weight and heterogeneity based arbitrament(IWHA)algorithm.In the proposed architecture,the random distribution function and information weight are employed to achieve the optimal selection of executors in the process of RD-DS,which avoids the case that some executors fail to be selected due to their stability difference in the conventional DHR architecture.Then,through introducing the heterogeneity to restrict the information weights in the procedure of the IWHA,the proposed architecture solves the common mode escape issue caused by the existence of multiple identical error output results of similar vulnerabilities.The experimental results characterize that the proposed architecture outperforms in heterogeneity,scheduling times,security,and stability over the conventional DHR architecture under the same conditions.
文摘Purpose–In response to the problem of insufficient traction/braking adhesion force caused by the existence of the third-body medium on the rail surface,this study aims to analyze the utilization of wheel-rail adhesion coefficient under different medium conditions and propose relevant measures for reasonable and optimized utilization of adhesion to ensure the traction/braking performance and operation safety of trains.Design/methodology/approach–Based on the PLS-160 wheel-rail adhesion simulation test rig,the study investigates the variation patterns of maximum utilized adhesion characteristics on the rail surface under different conditions of small creepage and large slip.Through statistical analysis of multiple sets of experimental data,the statistical distribution patterns of maximum utilized adhesion on the rail surface are obtained,and a method for analyzing wheel-rail adhesion redundancy based on normal distribution is proposed.The study analyzes the utilization of traction/braking adhesion,as well as adhesion redundancy,for different medium under small creepage and large slip conditions.Based on these findings,relevant measures for the reasonable and optimized utilization of adhesion are derived.Findings–When the third-body medium exists on the rail surface,the train should adopt the low-level service braking to avoid the braking skidding by extending the braking distance.Compared with the current adhesion control strategy of small creepage,adopting appropriate strategies to control the train’s adhesion coefficient near the second peak point of the adhesion coefficient-slip ratio curve in large slip can effectively improve the traction/braking adhesion redundancy and the upper limit of adhesion utilization,thereby ensuring the traction/braking performance and operation safety of the train.Originality/value–Most existing studies focus on the wheel-rail adhesion coefficient values and variation patterns under different medium conditions,without considering whether the rail surface with different medium can provide sufficient traction/braking utilized adhesion coefficient for the train.Therefore,there is a risk of traction overspeeding/braking skidding.This study analyzes whether the rail surface with different medium can provide sufficient traction/braking utilized adhesion coefficient for the train and whether there is redundancy.Based on these findings,relevant measures for the reasonable and optimized utilization of adhesion are derived to further ensure operation safety of the train.
文摘In signal processing and communication systems,digital filters are widely employed.In some circumstances,the reliability of those systems is crucial,necessitating the use of fault tolerant filter implementations.Many strategies have been presented throughout the years to achieve fault tolerance by utilising the structure and properties of the filters.As technology advances,more complicated systems with several filters become possible.Some of the filters in those complicated systems frequently function in parallel,for example,by applying the same filter to various input signals.Recently,a simple strategy for achieving fault tolerance that takes advantage of the availability of parallel filters was given.Many fault-tolerant ways that take advantage of the filter’s structure and properties have been proposed throughout the years.The primary idea is to use structured authentication scan chains to study the internal states of finite impulse response(FIR)components in order to detect and recover the exact state of faulty modules through the state of non-faulty modules.Finally,a simple solution of Double modular redundancy(DMR)based fault tolerance was developed that takes advantage of the availability of parallel filters for image denoising.This approach is expanded in this short to display how parallel filters can be protected using error correction codes(ECCs)in which each filter is comparable to a bit in a standard ECC.“Advanced error recovery for parallel systems,”the suggested technique,can find and eliminate hidden defects in FIR modules,and also restore the system from multiple failures impacting two FIR modules.From the implementation,Xilinx ISE 14.7 was found to have given significant error reduction capability in the fault calculations and reduction in the area which reduces the cost of implementation.Faults were introduced in all the outputs of the functional filters and found that the fault in every output is corrected.
文摘The 6-DOF manipulator provides a new option for traditional shipbuilding for its advantages of vast working space,low power consumption,and excellent flexibility.However,the rotation of the end effector along the tool axis is functionally redundant when using a robotic arm for five-axis machining.In the process of ship construction,the performance of the parts’protective coating needs to bemachined tomeet the Performance Standard of Protective Coatings(PSPC).The arbitrary redundancy configuration in path planning will result in drastic fluctuations in the robot joint angle,greatly reducing machining quality and efficiency.There have been some studies on singleobjective optimization of redundant variables,However,the quality and efficiency of milling are not affected by a single factor,it is usually influenced by several factors,such as the manipulator stiffness,the joint motion smoothness,and the energy consumption.To solve this problem,this paper proposed a new path optimization method for the industrial robot when it is used for five-axis machining.The path smoothness performance index and the energy consumption index are established based on the joint acceleration and the joint velocity,respectively.The path planning issue is formulated as a constrained multi-objective optimization problem by taking into account the constraints of joint limits and singularity avoidance.Then,the path is split into multiple segments for optimization to avoid the slow convergence rate caused by the high dimension.An algorithm combining the non-dominated sorting genetic algorithm(NSGA-II)and the differential evolution(DE)algorithm is employed to solve the above optimization problem.The simulations validate the effectiveness of the algorithm,showing the improvement of smoothness and the reduction of energy consumption.
文摘Redundancy control can effectively enhance the stability and robustness of a system.Based on the conventional redundancy control switchover and majority arbitration strategy,this paper introduces the concept of heterogeneity and dynamics,constructs a dynamic heterogeneous redundancy-based microcontroller architecture DHR-MCU,and designs a fixed-leader distributed consensus algorithm that satisfies the program running state control of this architecture.The theoretical analysis and actual measurement of the prototype system prove that this architecture has good anti-attack and self-recovery capabilities under normal functions and performances and meets the general robust features in terms of safety and security.
基金Project supported by the National Key Research and Development Program of China (Grant No.2021YFB3900701)the Science and Technology Plan Project of the State Administration for Market Regulation of China (Grant No.2023MK178)the National Natural Science Foundation of China (Grant No.42227802)。
文摘A redundant-subspace-weighting(RSW)-based approach is proposed to enhance the frequency stability on a time scale of a clock ensemble.In this method,multiple overlapping subspaces are constructed in the clock ensemble,and the weight of each clock in this ensemble is defined by using the spatial covariance matrix.The superimposition average of covariances in different subspaces reduces the correlations between clocks in the same laboratory to some extent.After optimizing the parameters of this weighting procedure,the frequency stabilities of virtual clock ensembles are significantly improved in most cases.
基金sponsored by the National Natural Science Foundation of China under grant number No. 62172353, No. 62302114, No. U20B2046 and No. 62172115Innovation Fund Program of the Engineering Research Center for Integration and Application of Digital Learning Technology of Ministry of Education No.1331007 and No. 1311022+1 种基金Natural Science Foundation of the Jiangsu Higher Education Institutions Grant No. 17KJB520044Six Talent Peaks Project in Jiangsu Province No.XYDXX-108
文摘With the rapid development of information technology,IoT devices play a huge role in physiological health data detection.The exponential growth of medical data requires us to reasonably allocate storage space for cloud servers and edge nodes.The storage capacity of edge nodes close to users is limited.We should store hotspot data in edge nodes as much as possible,so as to ensure response timeliness and access hit rate;However,the current scheme cannot guarantee that every sub-message in a complete data stored by the edge node meets the requirements of hot data;How to complete the detection and deletion of redundant data in edge nodes under the premise of protecting user privacy and data dynamic integrity has become a challenging problem.Our paper proposes a redundant data detection method that meets the privacy protection requirements.By scanning the cipher text,it is determined whether each sub-message of the data in the edge node meets the requirements of the hot data.It has the same effect as zero-knowledge proof,and it will not reveal the privacy of users.In addition,for redundant sub-data that does not meet the requirements of hot data,our paper proposes a redundant data deletion scheme that meets the dynamic integrity of the data.We use Content Extraction Signature(CES)to generate the remaining hot data signature after the redundant data is deleted.The feasibility of the scheme is proved through safety analysis and efficiency analysis.
基金Supported by the National Natural Science Foundation of China(52075468)the General Project of Natural Science Foundation of Hebei Prov-ince(E2020203052)+1 种基金the Open Fund Project of Shaanxi Provincial Key Laboratory of Hydraulic Technology(YYJS2022KF14)the BasicInnovation Research Cultivation Project of Yanshan University(2021LGZD003)。
文摘The feedback spring rod of the armature assembly is cancelled in the double redundance double nozzle flapper valve(DRDNFV),and the difficulty of valve core displacement control is increased.Therefore,this paper intends to study the static characteristic of DRDNFV through the AMESet and AMESim simulation.It is explored under the circumstance of the fixed orifices being clogged and experimentally verified on the test bench.The results show that the pressure gain increases and the flow gain decreases with the increasing clogged degree of the fixed orifices on both sides.The zero bias increases synchronously with the increasing clogged degree of the unilateral fixed orifice.The experimental results are basically consistent with the theoretical curves and the theoretical correctness of the simulation model is effectively verified.The results can provide the theoretical reference for design,debugging,maintenance and fault diagnosis of DRDNFV.
文摘The kinematic redundancy in a robot leads to an infinite number of solutions for inverse kinematics, which implies the possibility to select a 'best' solution according to an optimization criterion. In this paper, two optimization objective functions are proposed, aiming at either minimizing extra degrees of freedom (DOFs) or minimizing the total potential energy of a multilink redundant robot. Physical constraints of either equality or inequality types are taken into consideration in the objective functions. Since the closed-form solutions do not exist in general for highly nonlinear and constrained optimization problems, we adopt and develop two numerical methods, which are verified to be effective and precise in solving the two optimization problems associated with the redundant inverse kinematics. We first verify that the well established trajectory following method can precisely solve the two optimization problems, but is computation intensive. To reduce the computation time, a sequential approach that combines the sequential quadratic programming and iterative Newton-Raphson algorithm is developed. A 4-DOF Fujitsu Hoap-1 humanoid robot arm is used as a prototype to validate the effectiveness of the proposed optimization solutions.
基金supported by the National Natural Science Foundation of China (7117114371201087)+1 种基金the Tianjin Municipal Research Program of Application Foundation and Advanced Technology of China (10JCY-BJC07300)the Science and Technology Program of FOXCONN Group (120024001156)
文摘Structural redundancy elimination in case resource pools (CRP) is critical for avoiding performance bottlenecks and maintaining robust decision capabilities in cloud computing services. For these purposes, this paper proposes a novel approach to ensure redundancy elimination of a reasoning system in CRP. By using α entropy and mutual information, functional measures to eliminate redundancy of a system are developed with respect to a set of outputs. These measures help to distinguish both the optimal feature and the relations among the nodes in reasoning networks from the redundant ones with the elimination criterion. Based on the optimal feature and its harmonic weight, a model for knowledge reasoning in CRP (CRPKR) is built to complete the task of query matching, and the missing values are estimated with Bayesian networks. Moreover, the robustness of decisions is verified through parameter analyses. This approach is validated by the simulation with benchmark data sets using cloud SQL. Compared with several state-of-the-art techniques, the results show that the proposed approach has a good performance and boosts the robustness of decisions.
文摘Wireless sensor networks (WSNs) consist of sensor nodes that broadcast a message within a network. Efficient broadcasting is a key requirement in sensor networks and has been a focal point of research over the last few years. There are many challenging tasks in the network, including redundancy control and sensor node localization that mainly depend on broadcasting. In this paper, we propose a broadcasting algorithm to control redundancy and improve localization (BACRIL) in WSNs. The proposed algorithm incorporates the benefits of the gossip protocol for optimizing message broadcasting within the network. Simulation results show a controlled level of redundancy, which is up to 57.6% if the number of sensor nodes deployed in a 500 m×500 m area are increased from 50 to 500.
基金Supported by Research Fund for the Doctoral Program of Higher Education,China(Grant No.20131333110008)
文摘Although it is common to eliminate the singularity of parallel mechanism by adding the branched chain with actuation redundancy, there is no theory and method for the configuration synthesis of the branched chain with actuation redundancy in parallel mechanism. Branched chains with actuation redundancy are synthesized for eliminating interior singularity of 3-translational and 1-rotational(3T1R) parallel mechanisms. Guided by the discriminance method of hybrid screw group according to Grassmann line geometry, all the possibilities are listed for the occurrence of interior singularities in 3T1R parallel mechanism. Based on the linear relevance of screw system and the principles of eliminating parallel mechanism singularity with actuation redundancy, different types of branched chains with actuation redundancy are synthesized systematically to indicate the layout and the number of the branched chainsinterior with actuation redundancy. A general method is proposed for the configuration synthesis of the branched chains with actuation redundancy of the redundant parallel mechanism, and it builds a solid foundation for the subsequent performance optimization of the redundant actuation parallel mechanism.
文摘This paper is a survey of the state-of-the-art knowledge in structural redundancy measure and its application. The existing deterministic and probabilistic measures of structural redundancy are summarized. Emphasis is given to the discussion of their advantages and limitations. The application bf damage tolerance concept in the design and maintenance of marine structures is also reviewed. Some most critical problems in structural redundancy are proposed for future research.
文摘This study provides new insights into the comparison of cable-stayed and extradosed bridges based on the safety assessment of their stay cables.These bridges are often regarded as identical structures owing to the use of inclined cables;however,the international standards for bridge design stipulate different safety factors for stay cables of both types of bridges.To address this misconception,a comparative study was carried out on the safety factors of stay cables under fatigue and ultimate limit states by considering the effects of various untoward and damaging factors,such as overloading,cable loss,and corrosion.The primary goal of this study is to describe the structural disparities between both types of bridges and evaluate their structural redundancies by employing deterministic and nondeterministic methods.To achieve this goal,three-dimensional finite-element models of both bridges were developed based on the current design guidelines for stay cables in Japan.After the balanced states of the bridge models were achieved,static analyses were performed for different safety factors of stay cables in a parametric manner.Finally,the first-order reliability method and Monte Carlo method were applied to determine the reliability index of stay cables.The analysis results show that cable-stayed and extradosed bridges exhibit different structural redundancies for different safety factors under the same loading conditions.Moreover,a significant increase in structural redundancy occurs with an incremental increase in the safety factors of stay cables.
基金supported by the National Natural Science Foundation of China (71071159)
文摘The tracking, telemetry and command (TT&C) mission is extremely reliable for its characters of small time horizon and high redundancy. The combined forcing and failure biasing (CFFB) method that is usually used for simulating the unreliability of the highly dependable mission system seems not so efficient for the TT&C mission. The concept about the importance of failure transition is proposed based on the logical relationship between TT&C mission and its involved resources. Then, the importance is used for readjusting the transition rate of the failure transition when using the forcing and failure biasing during the simulation. Examples show that the improved CFFB method can evidently increase the occurrence of the TT&C mission failure event and decrease the sample variance. More redundancy of the TT&C mission leads to the improved CFFB method more efficient.
基金the Ministerial Level Advanced Research Foundation(66830202)
文摘Feature selection is an important problem in pattern classification systems. High dimension fisher criterion(HDF) is a good indicator of class separability. However, calculating the high dimension fisher ratio is difficult. A new feature selection method, called fisher-and-correlation (FC), is proposed. The proposed method is combining fisher criterion and correlation criterion based on the analysis of feature relevance and redundancy. The proposed methodology is tested in five different classification applications. The presented resuits confirm that FC performs as well as HDF does at much lower computational complexity.
文摘In this paper, a new definition of structure system redundancy is proposed in view of the various measures for structure redundancy. By introducing the terms of structure system failure at the mechanism level and equivalent reliability index, the safety for existing offshore platforms can be evaluated by the semi-probabilistic method presented in this paper. Some numerical examples are given and satisfactory results have been obtained.
文摘The study of optimization methods for reliability–redundancy allocation problems is a constantly changing field.New algorithms are continually being designed on the basis of observations of nature,wildlife,and humanity.In this paper,we review eight major evolutionary algorithms that emulate the behavior of civilization,ants,bees,fishes,and birds(i.e.,genetic algorithms,bee colony optimization,simulated annealing,particle swarm optimization,biogeography-based optimization,artificial immune system optimization,cuckoo algorithm and imperialist competitive algorithm).We evaluate the mathematical formulations and pseudo-codes of each algorithm and discuss how these apply to reliability–redundancy allocation problems.Results from a literature survey show the best results found for series,series–parallel,bridge,and applied case problems(e.g.,overspeeding gas turbine benchmark).Review of literature from recent years indicates an extensive improvement in the algorithm reliability performance.However,this improvement has been difficult to achieve for high-reliability applications.Insights and future challenges in reliability–redundancy allocation problems optimization are also discussed in this paper.