A redundant subspace weighting procedure for clock ensemble

A redundant-subspace-weighting(RSW)-based approach is proposed to enhance the frequency stability on a time scale of a clock ensemble.In this method,multiple overlapping subspaces are constructed in the clock ensemble,and the weight of each clock in this ensemble is defined by using the spatial covariance matrix.The superimposition average of covariances in different subspaces reduces the correlations between clocks in the same laboratory to some extent.After optimizing the parameters of this weighting procedure,the frequency stabilities of virtual clock ensembles are significantly improved in most cases.

Redundant Data Detection and Deletion to Meet Privacy Protection Requirements in Blockchain-Based Edge Computing Environment

With the rapid development of information technology,IoT devices play a huge role in physiological health data detection.The exponential growth of medical data requires us to reasonably allocate storage space for cloud servers and edge nodes.The storage capacity of edge nodes close to users is limited.We should store hotspot data in edge nodes as much as possible,so as to ensure response timeliness and access hit rate;However,the current scheme cannot guarantee that every sub-message in a complete data stored by the edge node meets the requirements of hot data;How to complete the detection and deletion of redundant data in edge nodes under the premise of protecting user privacy and data dynamic integrity has become a challenging problem.Our paper proposes a redundant data detection method that meets the privacy protection requirements.By scanning the cipher text,it is determined whether each sub-message of the data in the edge node meets the requirements of the hot data.It has the same effect as zero-knowledge proof,and it will not reveal the privacy of users.In addition,for redundant sub-data that does not meet the requirements of hot data,our paper proposes a redundant data deletion scheme that meets the dynamic integrity of the data.We use Content Extraction Signature(CES)to generate the remaining hot data signature after the redundant data is deleted.The feasibility of the scheme is proved through safety analysis and efficiency analysis.

Wavelet Denoising Applied to Hardware Redundant Systems for Rolling Element Bearing Fault Detection

This work presents a novel wavelet-based denoising technique for improving the signal-to-noise ratio(SNR)of nonsteady vibration signals in hardware redundant systems.The proposed method utilizes the relationship between redundant hardware components to effectively separate fault-related components from the vibration signature,thus enhancing fault detection accuracy.The study evaluates the proposed technique on two mechanically identical subsystems that are simultaneously controlled under the same speed and load inputs,with and without the proposed denoising step.The results demonstrate an increase in detection accuracy when incorporating the proposed denoising method into a fault detection system designed for hardware redundant machinery.This work is original in its application of a new method for improving performance when using residual analysis for fault detection in hardware redundant machinery configurations.Moreover,the proposed methodology is applicable to nonstationary equipment that experiences changes in both speed and load.

Reliability-based selective maintenance for redundant systems with dependent performance characteristics of components

The reliability-based selective maintenance(RSM)decision problem of systems with components that have multiple dependent performance characteristics(PCs)reflecting degradation states is addressed in this paper.A vine-Copulabased reliability evaluation method is proposed to estimate the reliability of system components with multiple PCs.Specifically,the marginal degradation reliability of each PC is built by using the Wiener stochastic process based on the PC’s degradation mechanism.The joint degradation reliability of the component with multiple PCs is established by connecting the marginal reliability of PCs using D-vine.In addition,two RSM decision models are developed to ensure the system accomplishes the next mission.The genetic algorithm(GA)is used to solve the constraint optimization problem of the models.A numerical example illustrates the application of the proposed RSM method.

Redundant Transmission Control Algorithm for Information-Centric Vehicular IoT Networks

Vehicular Adhoc Networks(VANETs)enable vehicles to act as mobile nodes that can fetch,share,and disseminate information about vehicle safety,emergency events,warning messages,and passenger infotainment.However,the continuous dissemination of information fromvehicles and their one-hop neighbor nodes,Road Side Units(RSUs),and VANET infrastructures can lead to performance degradation of VANETs in the existing hostcentric IP-based network.Therefore,Information Centric Networks(ICN)are being explored as an alternative architecture for vehicular communication to achieve robust content distribution in highly mobile,dynamic,and errorprone domains.In ICN-based Vehicular-IoT networks,consumer mobility is implicitly supported,but producer mobility may result in redundant data transmission and caching inefficiency at intermediate vehicular nodes.This paper proposes an efficient redundant transmission control algorithm based on network coding to reduce data redundancy and accelerate the efficiency of information dissemination.The proposed protocol,called Network Cording Multiple Solutions Scheduling(NCMSS),is receiver-driven collaborative scheduling between requesters and information sources that uses a global parameter expectation deadline to effectively manage the transmission of encoded data packets and control the selection of information sources.Experimental results for the proposed NCMSS protocol is demonstrated to analyze the performance of ICN-vehicular-IoT networks in terms of caching,data retrieval delay,and end-to-end application throughput.The end-to-end throughput in proposed NCMSS is 22%higher(for 1024 byte data)than existing solutions whereas delay in NCMSS is reduced by 5%in comparison with existing solutions.

Apoptotic cell fragments locally activate tingible body macrophages in the germinal center

Germinal centers(GCs)that form within lymphoid follicles during antibody responses are sites of massive cell death.Tingible body macrophages(TBMs)are tasked with apoptotic cell clearance to prevent secondary necrosis and autoimmune activation by intracellular self antigens.We show by multiple redundant and complementary methods that TBMs derive from a lymph node resident,CD169-lineage,CSF1R-blockade-resistant precursor that is prepositioned in the follicle.

Reliability Analysis of a Mixed Redundant Model in C 3I System

Aim To define a mixed redundant model(MRM), improving the reliability of C 3I system. Methods The model combined the technology characters of two? unit system with one warm stand by unit and function substitute system. The reliability and availability equations of MRM were deduced. Results and Conclusion Compared with several other reliability models, it has obvious effect upon improving the system reliability. The effect? cost rate is very high among these models. The model can be used in reliability design, evaluation and check of C 3I system. Only a little attached cost is needed to improve C 3I system reliability effectively.

Performance analysis of the tight combination of GPS, BDS, GALILEO, and QzsS mixed frequencies signals

With the gradual development and modernization of satellite navigation systems,using observation information from multi-GNss has become one of the hot-spot issues in recent years.Multi-system loose combinations form double-difference observation equations within their respective systems,and the positioning effect is improved.However,the interchangeability and compatible interoperability between global navigation satellite systems(GNSS)cannot be truly realized.At the same time,when the number of visible satellites decreases abruptly,the positioning performance deteriorates sharply.This paper focuses on the GNsS multi-system tight combination relative positioning technique,gives a mathe-matical model of multi-system tight combination relative positioning considering differential inter-system bias(DISB),and analyzes the time-varying characteristics of DISB at overlapping and non-overlapping frequencies among GPS/Galileo,GPS/BDS,and GPS/QZSS in terms of receiver brand,tem-perature,and receiver restart.The GNsS tight combination relative positioning performance is verified by static data from Curtin University and dynamic data measured at Taiyuan University of Technology.The results show that compared with loose combination,the ambiguity-fixed rate increases from 62.18%to 97.60%for static data and from 74.97%to 99.53%for dynamic data when the elevation mask angle is 50°,resulting in a significant improvement in positioning performance.

A framework for dynamic modelling of railway track switches considering the switch blades,actuators and control systems

The main contribution of this paper is the development and demonstration of a novel methodology that can be followed to develop a simulation twin of a railway track switch system to test the functionality in a digital environment.This is important because,globally,railway track switches are used to allow trains to change routes;they are a key part of all railway networks.However,because track switches are single points of failure and safety-critical,their inability to operate correctly can cause significant delays and concomitant costs.In order to better understand the dynamic behaviour of switches during operation,this paper has developed a full simulation twin of a complete track switch system.The approach fuses finite element for the rail bending and motion,with physics-based models of the electromechanical actuator system and the control system.Hence,it provides researchers and engineers the opportunity to explore and understand the design space around the dynamic operation of new switches and switch machines before they are built.This is useful for looking at the modification or monitoring of existing switches,and it becomes even more important when new switch concepts are being considered and evaluated.The simulation is capable of running in real time or faster meaning designs can be iterated and checked interactively.The paper describes the modelling approach,demonstrates the methodology by developing the system model for a novel“REPOINT”switch system,and evaluates the system level performance against the dynamic performance requirements for the switch.In the context of that case study,it is found that the proposed new actuation system as designed can meet(and exceed)the system performance requirements,and that the fault tolerance built into the actuation ensures continued operation after a single actuator failure.

Intelligent Dynamic Heterogeneous Redundancy Architecture for IoT Systems

The conventional dynamic heterogeneous redundancy(DHR)architecture suffers from the security threats caused by the stability differences and similar vulnerabilities among the executors.To overcome these challenges,we propose an intelligent DHR architecture,which is more feasible by intelligently combining the random distribution based dynamic scheduling algorithm(RD-DS)and information weight and heterogeneity based arbitrament(IWHA)algorithm.In the proposed architecture,the random distribution function and information weight are employed to achieve the optimal selection of executors in the process of RD-DS,which avoids the case that some executors fail to be selected due to their stability difference in the conventional DHR architecture.Then,through introducing the heterogeneity to restrict the information weights in the procedure of the IWHA,the proposed architecture solves the common mode escape issue caused by the existence of multiple identical error output results of similar vulnerabilities.The experimental results characterize that the proposed architecture outperforms in heterogeneity,scheduling times,security,and stability over the conventional DHR architecture under the same conditions.

A Decentralized Autonomous Control on Highly Redundant Robot Manipulators

The control method of highly redundant robot manipulators is introduced. A decentralized autonomous control scheme is used to guide the movement of robot manipulators so that the work done by manipulators is minimized. The method of computing pseudoinverse which needs too many complicated calculation can be avoided. Then the calculation and control of robots are simplified. At the same time system robustness/fault tolerance is achieved.

A new technique of monsplasty as an adjunctive procedure in cases of abdominoplasty:A prospective clinical trial

Background:No standard monsplasty technique has existed until now.Although various monsplasty methods have been described,they exhibit high complication rates with sparse postoperative data.Studies that used pubic suspension techniques did not describe exact anatomical landmarks for the mons pexy.This study aimed to improve the aesthetic and functional appearance of the pubic region with long-term results for all grades of pubic ptosis or bulging with abdominoplasty and provide exact anatomical points to anchor the mons to the rectus sheath.Methods:This non-randomized prospective clinical trial included 30 patients with various degrees of abdominal wall laxity between December 2017 and September 2019.The surgical procedure was performed for female patients with pendulous abdomen,pubic ptosis or bulging,body mass index≤35 kg/m^(2),and age 18–60 years.All patients were followed for up to one year;patient satisfaction was assessed before and after surgery regarding aesthetic results and impact on outfits,hygiene,and sexual activity.Results:The marginal homogeneity test revealed a statistically significant patient satisfaction rate regarding outfits,sexual function,hygiene,and aesthetics.Regarding postoperative complications,seroma(one case)was managed by aspiration,and one case of wound dehiscence was managed conservatively with dressings.Conclusion:This study recommends a quick and reproducible monsplasty technique with a low complication rate,a technique that helps determine specific anatomical landmarks for anchoring the mons to the rectus sheath.Combining this technique with abdominal contouring is advisable for optimal aesthetic results and maintained lymphatic drainage in the pubic region.

Research on static characteristic of double redundance double nozzle flapper valve based on AMESim

The feedback spring rod of the armature assembly is cancelled in the double redundance double nozzle flapper valve(DRDNFV),and the difficulty of valve core displacement control is increased.Therefore,this paper intends to study the static characteristic of DRDNFV through the AMESet and AMESim simulation.It is explored under the circumstance of the fixed orifices being clogged and experimentally verified on the test bench.The results show that the pressure gain increases and the flow gain decreases with the increasing clogged degree of the fixed orifices on both sides.The zero bias increases synchronously with the increasing clogged degree of the unilateral fixed orifice.The experimental results are basically consistent with the theoretical curves and the theoretical correctness of the simulation model is effectively verified.The results can provide the theoretical reference for design,debugging,maintenance and fault diagnosis of DRDNFV.

Analysis of wheel-rail adhesion redundancy considering the thirdbody medium on the rail surface

Purpose–In response to the problem of insufficient traction/braking adhesion force caused by the existence of the third-body medium on the rail surface,this study aims to analyze the utilization of wheel-rail adhesion coefficient under different medium conditions and propose relevant measures for reasonable and optimized utilization of adhesion to ensure the traction/braking performance and operation safety of trains.Design/methodology/approach–Based on the PLS-160 wheel-rail adhesion simulation test rig,the study investigates the variation patterns of maximum utilized adhesion characteristics on the rail surface under different conditions of small creepage and large slip.Through statistical analysis of multiple sets of experimental data,the statistical distribution patterns of maximum utilized adhesion on the rail surface are obtained,and a method for analyzing wheel-rail adhesion redundancy based on normal distribution is proposed.The study analyzes the utilization of traction/braking adhesion,as well as adhesion redundancy,for different medium under small creepage and large slip conditions.Based on these findings,relevant measures for the reasonable and optimized utilization of adhesion are derived.Findings–When the third-body medium exists on the rail surface,the train should adopt the low-level service braking to avoid the braking skidding by extending the braking distance.Compared with the current adhesion control strategy of small creepage,adopting appropriate strategies to control the train’s adhesion coefficient near the second peak point of the adhesion coefficient-slip ratio curve in large slip can effectively improve the traction/braking adhesion redundancy and the upper limit of adhesion utilization,thereby ensuring the traction/braking performance and operation safety of the train.Originality/value–Most existing studies focus on the wheel-rail adhesion coefficient values and variation patterns under different medium conditions,without considering whether the rail surface with different medium can provide sufficient traction/braking utilized adhesion coefficient for the train.Therefore,there is a risk of traction overspeeding/braking skidding.This study analyzes whether the rail surface with different medium can provide sufficient traction/braking utilized adhesion coefficient for the train and whether there is redundancy.Based on these findings,relevant measures for the reasonable and optimized utilization of adhesion are derived to further ensure operation safety of the train.

Quantitative Comparative Study of the Performance of Lossless Compression Methods Based on a Text Data Model

Data compression plays a key role in optimizing the use of memory storage space and also reducing latency in data transmission. In this paper, we are interested in lossless compression techniques because their performance is exploited with lossy compression techniques for images and videos generally using a mixed approach. To achieve our intended objective, which is to study the performance of lossless compression methods, we first carried out a literature review, a summary of which enabled us to select the most relevant, namely the following: arithmetic coding, LZW, Tunstall’s algorithm, RLE, BWT, Huffman coding and Shannon-Fano. Secondly, we designed a purposive text dataset with a repeating pattern in order to test the behavior and effectiveness of the selected compression techniques. Thirdly, we designed the compression algorithms and developed the programs (scripts) in Matlab in order to test their performance. Finally, following the tests conducted on relevant data that we constructed according to a deliberate model, the results show that these methods presented in order of performance are very satisfactory:- LZW- Arithmetic coding- Tunstall algorithm- BWT + RLELikewise, it appears that on the one hand, the performance of certain techniques relative to others is strongly linked to the sequencing and/or recurrence of symbols that make up the message, and on the other hand, to the cumulative time of encoding and decoding.

Beyond Defense: Proactive Approaches to Disaster Recovery and Threat Intelligence in Modern Enterprises

As cyber threats keep changing and business environments adapt, a comprehensive approach to disaster recovery involves more than just defensive measures. This research delves deep into the strategies required to respond to threats and anticipate and mitigate them proactively. Beginning with understanding the critical need for a layered defense and the intricacies of the attacker’s journey, the research offers insights into specialized defense techniques, emphasizing the importance of timely and strategic responses during incidents. Risk management is brought to the forefront, underscoring businesses’ need to adopt mature risk assessment practices and understand the potential risk impact areas. Additionally, the value of threat intelligence is explored, shedding light on the importance of active engagement within sharing communities and the vigilant observation of adversary motivations. “Beyond Defense: Proactive Approaches to Disaster Recovery and Threat Intelligence in Modern Enterprises” is a comprehensive guide for organizations aiming to fortify their cybersecurity posture, marrying best practices in proactive and reactive measures in the ever-challenging digital realm.

Design of a Servo Mechanical Press with Redundant Actuation

A servo press is a new type of mechanical press that is driven by programmable motors and offers superior performance such as low noise, excellent efficiency and high precision for metal forming operations. Similar to multi-link mechanical presses, a servo mechanical press tends to grow in size as the tonnage increases that calls for larger, heavy duty servo motors, which could be expensive and may not even be available. In this paper, a new concept of servo mechanical press with redundant actuation is proposed firstly using two servo motors driving one input shaft, i.e. one-point-two-motor mode that makes it possible to produce a larger press with available servomotors. Then the punching mechanism design is detailed. The performance indices are set up including mechanical advantage reciprocal and link force ratios. A bounded feasible solution space is constructed for dimensional synthesis based on non-dimensional link lengths and assembly conditions. The performance atlases are depicted over the bounded feasible solution space that lead to a visual solution of the punching mechanism with global optimization. Finally, case studies are given to illustrate the design method with visual global optimization, and a prototype with 200 t punching force is being developed in our laboratory to demonstrate efficacy of the new concept for servo mechanical press. The presented research provides a feasible solution to the development of heavy-duty servo mechanical presses and finds potential applications in the development of other types of heavy equipments with electric drive.

Performance Degradation and Reliability Analysis for Redundant Actuation System

Redundant actuator is the key component of Fly-By-Wire （FBW） system in which exists the inherent force fighting among different redundant channels at colligation point, This paper establishes the mathematical model of quad redundant actuator （QRA）, investigates the force equalization algorithm and carries out the performance degradation simulation and reliability analysis under the first failure and the second failure. The results indicate that the optimal equalization algorithm can solve the force fighting effectively, and the QRA can operate at degradation performance continuously under the first failure and the second failure. With the dynamic fault tree analysis, this paper calculates the reliability based on the performance of QRA and proves that the redundant actuator has very high reliability and safety.

Collision Avoidance of Cooperative Dual Redundant Manipulators

Dual redundant manipulators are extremely useful for tasks in dangerous or space environments, but efficient and real time coordinated control is hard to achieve. Collision avoidance between two cooperative manipulators is vital to the successful applications of dual redundant manipulators. Although methods based on the distance function have been demonstrated simple and efficient, different collision avoidance points can usually produce completely different results and even failure. The paper discussed the choices of collision avoidance points and proposed a novel method for the choosing of those points. The method is testified by simulation results of two redundant planar manipulators.

Kinematic Sensitivity Analysis and Dimensional Synthesis of a Redundantly Actuated Parallel Robot for Friction Stir Welding

Friction stir welding(FSW)has been widely applied in many fields as an alternative to traditional fusion welding.Although serial robots can provide the orientation capability required to weld along curved surfaces,they cannot adequately support the huge axial downward forces that FSW generates.Available parallel mechanism architectures,particularly redundantly actuated architectures for FSW,are still very limited.In this paper,a redundantly actuated 2 UPR-2 RPU parallel robot for FSW is proposed,where U denotes a universal joint,R denotes a revolute joint and P denotes a prismatic pair.First,its semi-symmetric structure is described.Next,inverse kinematics analysis involving an analytical representation of rotational axes is implemented.Velocity analysis is also conducted,which leads to the formation of a Jacobian matrix.Sensitivity performance is evaluated utilizing level set and convex optimization methods,where the local sensitivity indices are unit consistent,coordinate free,and of definite physical significance.Furthermore,global and hierarchical sensitivity indices are proposed for the design process.Finally,dimension synthesis is conducted based on the sensitivity indices and the optimal link parameters of the parallel robot are obtained.In summary,this paper proposes a dimensional synthesis method for a redundantly actuated parallel robot for FSW based on sensitivity indices.