A redundant subspace weighting procedure for clock ensemble

A redundant-subspace-weighting(RSW)-based approach is proposed to enhance the frequency stability on a time scale of a clock ensemble.In this method,multiple overlapping subspaces are constructed in the clock ensemble,and the weight of each clock in this ensemble is defined by using the spatial covariance matrix.The superimposition average of covariances in different subspaces reduces the correlations between clocks in the same laboratory to some extent.After optimizing the parameters of this weighting procedure,the frequency stabilities of virtual clock ensembles are significantly improved in most cases.

Redundant Data Detection and Deletion to Meet Privacy Protection Requirements in Blockchain-Based Edge Computing Environment

With the rapid development of information technology,IoT devices play a huge role in physiological health data detection.The exponential growth of medical data requires us to reasonably allocate storage space for cloud servers and edge nodes.The storage capacity of edge nodes close to users is limited.We should store hotspot data in edge nodes as much as possible,so as to ensure response timeliness and access hit rate;However,the current scheme cannot guarantee that every sub-message in a complete data stored by the edge node meets the requirements of hot data;How to complete the detection and deletion of redundant data in edge nodes under the premise of protecting user privacy and data dynamic integrity has become a challenging problem.Our paper proposes a redundant data detection method that meets the privacy protection requirements.By scanning the cipher text,it is determined whether each sub-message of the data in the edge node meets the requirements of the hot data.It has the same effect as zero-knowledge proof,and it will not reveal the privacy of users.In addition,for redundant sub-data that does not meet the requirements of hot data,our paper proposes a redundant data deletion scheme that meets the dynamic integrity of the data.We use Content Extraction Signature(CES)to generate the remaining hot data signature after the redundant data is deleted.The feasibility of the scheme is proved through safety analysis and efficiency analysis.

Reliability Analysis of a Mixed Redundant Model in C 3I System

Aim To define a mixed redundant model(MRM), improving the reliability of C 3I system. Methods The model combined the technology characters of two? unit system with one warm stand by unit and function substitute system. The reliability and availability equations of MRM were deduced. Results and Conclusion Compared with several other reliability models, it has obvious effect upon improving the system reliability. The effect? cost rate is very high among these models. The model can be used in reliability design, evaluation and check of C 3I system. Only a little attached cost is needed to improve C 3I system reliability effectively.

A Decentralized Autonomous Control on Highly Redundant Robot Manipulators

The control method of highly redundant robot manipulators is introduced. A decentralized autonomous control scheme is used to guide the movement of robot manipulators so that the work done by manipulators is minimized. The method of computing pseudoinverse which needs too many complicated calculation can be avoided. Then the calculation and control of robots are simplified. At the same time system robustness/fault tolerance is achieved.

Kinematic Sensitivity Analysis and Dimensional Synthesis of a Redundantly Actuated Parallel Robot for Friction Stir Welding

Friction stir welding(FSW)has been widely applied in many fields as an alternative to traditional fusion welding.Although serial robots can provide the orientation capability required to weld along curved surfaces,they cannot adequately support the huge axial downward forces that FSW generates.Available parallel mechanism architectures,particularly redundantly actuated architectures for FSW,are still very limited.In this paper,a redundantly actuated 2 UPR-2 RPU parallel robot for FSW is proposed,where U denotes a universal joint,R denotes a revolute joint and P denotes a prismatic pair.First,its semi-symmetric structure is described.Next,inverse kinematics analysis involving an analytical representation of rotational axes is implemented.Velocity analysis is also conducted,which leads to the formation of a Jacobian matrix.Sensitivity performance is evaluated utilizing level set and convex optimization methods,where the local sensitivity indices are unit consistent,coordinate free,and of definite physical significance.Furthermore,global and hierarchical sensitivity indices are proposed for the design process.Finally,dimension synthesis is conducted based on the sensitivity indices and the optimal link parameters of the parallel robot are obtained.In summary,this paper proposes a dimensional synthesis method for a redundantly actuated parallel robot for FSW based on sensitivity indices.

Performance Degradation and Reliability Analysis for Redundant Actuation System

Redundant actuator is the key component of Fly-By-Wire （FBW） system in which exists the inherent force fighting among different redundant channels at colligation point, This paper establishes the mathematical model of quad redundant actuator （QRA）, investigates the force equalization algorithm and carries out the performance degradation simulation and reliability analysis under the first failure and the second failure. The results indicate that the optimal equalization algorithm can solve the force fighting effectively, and the QRA can operate at degradation performance continuously under the first failure and the second failure. With the dynamic fault tree analysis, this paper calculates the reliability based on the performance of QRA and proves that the redundant actuator has very high reliability and safety.

Design of a Servo Mechanical Press with Redundant Actuation

A servo press is a new type of mechanical press that is driven by programmable motors and offers superior performance such as low noise, excellent efficiency and high precision for metal forming operations. Similar to multi-link mechanical presses, a servo mechanical press tends to grow in size as the tonnage increases that calls for larger, heavy duty servo motors, which could be expensive and may not even be available. In this paper, a new concept of servo mechanical press with redundant actuation is proposed firstly using two servo motors driving one input shaft, i.e. one-point-two-motor mode that makes it possible to produce a larger press with available servomotors. Then the punching mechanism design is detailed. The performance indices are set up including mechanical advantage reciprocal and link force ratios. A bounded feasible solution space is constructed for dimensional synthesis based on non-dimensional link lengths and assembly conditions. The performance atlases are depicted over the bounded feasible solution space that lead to a visual solution of the punching mechanism with global optimization. Finally, case studies are given to illustrate the design method with visual global optimization, and a prototype with 200 t punching force is being developed in our laboratory to demonstrate efficacy of the new concept for servo mechanical press. The presented research provides a feasible solution to the development of heavy-duty servo mechanical presses and finds potential applications in the development of other types of heavy equipments with electric drive.

Mission-oriented dynamic optimization model of carrying spares for warship redundant system

Redundancy is a common structure for warship system,and it is an effective way to improve the reliability of the system.In this paper, warship system is taken as the object of study,based on the system reliability equivalence principle, a spares demand rate calculation method for redundant system is proposed through structure transformation. According to the system analysis method, the general modeling data structure of spares support echelon and system indenture is established, and the mission success probability is taken as the optimization target to build the dynamic optimization model of carrying spares during the process of multi-phase. By introducing the Lagrange multiplier, the spares weight, volume and cost are transformed to the single target of the spares total scale, and the initial Lagrange factors and its dynamic adjustment policy is proposed. In a given example, the main influence factors of the carrying spares project are analyzed, and the study results are in accordance with the reality, which can provide a new approach to mission-oriented carrying spares optimization for the redundant system.

Collision Avoidance of Cooperative Dual Redundant Manipulators

Dual redundant manipulators are extremely useful for tasks in dangerous or space environments, but efficient and real time coordinated control is hard to achieve. Collision avoidance between two cooperative manipulators is vital to the successful applications of dual redundant manipulators. Although methods based on the distance function have been demonstrated simple and efficient, different collision avoidance points can usually produce completely different results and even failure. The paper discussed the choices of collision avoidance points and proposed a novel method for the choosing of those points. The method is testified by simulation results of two redundant planar manipulators.

Motion Planning Algorithms of Redundant Manipulators Based on Self-motion Manifolds

The current motion planning approaches for redundant manipulators mainly includes two categories： improved gradient-projection method and some other efficiency numerical methods. The former is excessively sensitive to parameters, which makes adjustment difficult; and the latter treats the motion planning as general task by ignoring the particularity, which has good universal property but reduces the solving speed for on-line real-time planning. In this paper, a novel stepwise solution based on self-motion manifold is proposed for motion planning of redundant manipulators, namely, the chief tasks and secondary tasks are implemented step by step. Firstly, the posture tracking of end-effector is achieved accurately by employing the non-redundant joint. Secondly, the end-effector is set to keep stationary. Finally, self-motion of manipulator is realized via additional work on the gradient of redundant joint displacement. To verify this solution, experiments of round obstacle avoiding are carried out via the planar 3 degree-of-~eedom manipulator. And the experimental results indicate that this motion planning algorithm can effectively achieve obstacle avoiding and posture tracking of the end-effector. Compared with traditional gradient projection method, this approach can accelerate the problem-solving process, and is more applicable to obstacle avoiding and other additional work in displacement level.

Homologous fault monitoring technology of redundant INS in airborne avionics systems

Redundant technology plays an important role in improving the reliability and fault-tolerance of the airborne avionics systems. A Markov state transition model is introduced to the reliability analysis of the redundant inertial navigation system （RINS） in airborne navigation systems. An information processing mechanism based on difference filtering is put forward to strengthen the consistency between the outputs of the equal-precision inertial navigation system （INS）. On this basis, the homologous fault monitoring algorithm is designed to realize the homologous fault monitoring of RINS. The simulation is carried out based on the above algorithms, and the results verify the effectiveness of the proposed fault monitoring algorithm based on difference filtering. Research results have good reference value for the configuration and design of RINS in airborne integrated avionics systems.

Active Control of Elastodynamic Response of Flexible Redundant Robot Manipulators

This paper presents an analytical investigation into activevibration control of flexible redundant robot manipulators featuringpiezoelectric actuators and strain gage sensors. The state-sp- aceexpression of the discrete time-varying dynamic system is developedfirstly. The LQR optimal control law is presented based upon thediscrete Minimum Principle. Moreover, an approximate method isproposed for estimating the state information of the system. Finally,a planar 3R flexible redundant manipulator is utilized as anillustration example. The simulation results show that the dy- namicperformance of the manipulator has been improved significantly.

Redundant discrete wavelet transforms based moving object recognition and tracking

A method for moving object recognition and tracking in the intelligent traffic monitoring system is presented. For the shortcomings and deficiencies of the frame-subtraction method, a redundant discrete wavelet transform （RDWT） based moving object recognition algorithm is put forward, which directly detects moving objects in the redundant discrete wavelet transform domain. An improved adaptive mean-shift algorithm is used to track the moving object in the follow up frames. Experimental results show that the algorithm can effectively extract the moving object, even though the object is similar to the background, and the results are better than the traditional frame-subtraction method. The object tracking is accurate without the impact of changes in the size of the object. Therefore the algorithm has a certain practical value and prospect.

Rapid Optimization of Tension Distribution for Cable-Driven Parallel Manipulators with Redundant Cables

The solution of tension distributions is infinite for cable-driven parallel manipulators（CDPMs） with redundant cables. A rapid optimization method for determining the optimal tension distribution is presented. The new optimization method is primarily based on the geometry properties of a polyhedron and convex analysis. The computational efficiency of the optimization method is improved by the designed projection algorithm, and a fast algorithm is proposed to determine which two of the lines are intersected at the optimal point. Moreover, a method for avoiding the operating point on the lower tension limit is developed. Simulation experiments are implemented on a six degree-of-freedom（6-DOF） CDPM with eight cables, and the results indicate that the new method is one order of magnitude faster than the standard simplex method. The optimal distribution of tension distribution is thus rapidly established on real-time by the proposed method.

Entropy-Based Approach to Remove Redundant Monitoring Wells from Regional-Scale Groundwater Network

An entropy-based approach is applied to identify redundant wells in thenetwork. In the process of this research, groundwater-monitoring network is considered as acommunication system with a capability to transfer information, and monitoring wells are taken asinformation receivers. The concepts of entropy and mutual information are then applied to measurethe information content of individual monitoring well and information relationship betweenmonitoring well pairs. The efficiency of information transfer among monitoring wells is the basis tojudge the redundancy in the network. And the capacity of the monitoring wells to provideinformation on groundwater is the point of evaluation to identify redundant monitoring wells. Thisapproach is demonstrated using the data from a regional-scale ground-water network in Hebei plain,China The result shows that the entropy-based method is recommendable in optimizing groundwaternetworks, especially for those within media of higher heterogeneities and ani-sotropies.

Obstacle Avoidance and Multitarget Tracking of a Super Redundant Modular Manipulator Based on Bezier Curve and Particle Swarm Optimization

A super redundant serpentine manipulator has slender structure and multiple degrees of freedom.It can travel through narrow spaces and move in complex spaces.This manipulator is composed of many modules that can form different lengths of robot arms for different application sites.The increase in degrees of freedom causes the inverse kinematics of redundant manipulator to be typical and immensely increases the calculation load in the joint space.This paper presents an integrated optimization method to solve the path planning for obstacle avoidance and discrete trajectory tracking of a super redundant manipulator.In this integrated optimization,path planning is established on a Bezier curve,and particle swarm optimization is adopted to adjust the control points of the Bezier curve with the kinematic constraints of manipulator.A feasible obstacle avoidance path is obtained along with a discrete trajectory tracking by using a follow-the-leader strategy.The relative distance between each two discrete path points is limited to reduce the fitting error of the connecting rigid links to the smooth curve.Simulation results show that this integrated optimization method can rapidly search for the appropriate trajectory to guide the manipulator in obtaining the target while achieving obstacle avoidance and meeting joint constraints.The proposed algorithm is suitable for 3D space obstacle avoidance and multitarget path tracking.

SOLVING INVERSE KINEMATICS OF REDUNDANT MANIPULATOR BASED ON NEURAL NETWORK

For the redundant manipulators, neural network is used to tackle the velocityinverse kinematics of robot manipulators. The neural networks utilized are multi-layeredperceptions with a back-propagation training algorithm. The weight table is used to save the weightssolving the inverse kinematics based on the different optimization performance criteria.Simulations verity the effectiveness of using neural network.

Using redundant parallel architecture to improve speaker recognition performance

In this paper, we propose two kinds of modifications in speaker recognition. First, the correlations between frequency channels are of prime importance for speaker recognition. Some of these correlations are lost when the frequency domain is divided into sub-bands. Consequently we propose a particularly redundant parallel architecture for which most of the correlations are kept. Second, generally a log transformation used to modify the power spectrum is done after the filter-bank in the classical spectrum calculation. We will see that performing this transformation before the filter bank is more interesting in our case. In the processing of recognition, the Gaussian mixture model （GMM） recognition arithmetic is adopted. Experiments on speech corrupted by noise show a better adaptability of this approach in noisy environments, comoared with a conventional device, esoeciallv when oruning of some recognizers is performed.

COMPREHENSIVE EVALUATION OF FAULT-TOLERANT PROPERTIES OF REDUNDANT ROBOTS

When a redundant robot performs a fault-tolerant operation for locked joint failures, its fault tolerant properties should include dexterity and sudden change of joint velocity at the moment of locking failed joints and the dexterity during the post-failure. Firstly three fault-tolerant indexes, reduced condition number, sudden change of relative joint velocity and centrality are proposed, which can comprehensively evaluate the kinematical performance of a redundant robot during its entire fault-tolerant operations. Then, the influence of the initial postures of robot＇s end-effector on these fault-tolerant indexes is analyzed with a planar robot and a spatial robot. Simulation results show that for a given task the joint trajectory with the best comprehensive effect of fault tolerance can be determined by optimizing the initial posture of a robot.

A New Method for Type Synthesis of 2R1T and 2T1R 3-DOF Redundant Actuated Parallel Mechanisms with Closed Loop Units

The current type synthesis of the redundant actuated parallel mechanisms is adding active-actuated kinematic branches on the basis of the traditional parallel mechanisms,or using screw theory to perform multiple getting intersection and union to complete type synthesis.The number of redundant parallel mechanisms obtained by these two methods is limited.In this paper,based on Grassmann line geometry and Atlas method,a novel and effective method for type synthesis of redundant actuated parallel mechanisms(PMs)with closed-loop units is proposed.Firstly,the degree of freedom(DOF)and constraint line graph of the moving platform are determined successively,and redundant lines are added in constraint line graph to obtain the redundant constraint line graph and their equivalent line graph,and a branch constraint allocation scheme is formulated based on the allocation criteria.Secondly,a scheme is selected and redundant lines are added in the branch chains DOF graph to construct the redundant actuated branch chains with closed-loop units.Finally,the branch chains that meet the requirements of branch chains configuration criteria and F&C(degree of freedom&constraint)line graph are assembled.In this paper,two types of 2 rotational and 1 translational(2R1T)redundant actuated parallel mechanisms and one type of 2 translational and 1 rotational(2T1R)redundant actuated parallel mechanisms with few branches and closed-loop units were taken as examples,and 238,92 and 15 new configurations were synthesized.All the mechanisms contain closed-loop units,and the mechanisms and the actuators both have good symmetry.Therefore,all the mechanisms have excellent comprehensive performance,in which the two rotational DOFs of the moving platform of 2R1T redundant actuated parallel mechanism can be independently controlled.The instantaneous analysis shows that all mechanisms are not instantaneous,which proves the feasibility and practicability of the method.