Development of a Certified Reference Material from Caffeine Solution for Assuring the Quality of Food and Drug Measurements

Caffeine intake by pregnant women, adults and children can be harmful to the health of all particularly fetuses if the intake exceeds the permissible limits. Therefore, it is of fundamental importance to measure its concentration accurately using certified reference materials (CRMs). In the literature, no scientific details are published about the certification of caffeine standard solutions, and therefore, the present article covers this gap. A batch of caffeine solution was prepared in concentration of 1000 mg/kg and bottled. Homogeneity and stability of the candidate reference material were assessed by HPLC-UV and the results showed that the material is homogenous and stable enough. Characterization of the caffeine reference material was performed by HPLC-UV, LC-MS/MS and UV-VIS-NIR spectrophotometer in three different days and the characterization uncertainty was estimated in accordance with the requirements of ISO GUM. The certified value (999.86 ± 8.57 mg/kg) was derived as a weighted mean from the gravimetry and the three characterization methods and the certified uncertainty was calculated according to ISO Guide 35. The produced CRM is of strong interest to the food and drug analytical laboratories for the validity and credibility of their caffeine measurement results.

Certification of a Multicomponent Reference Material from Natural Gas Mixture by Gravimetry and Dual GC-FID/TCD System

Natural gas (NG) is one of the most important sources of energy for industrial and domestic consumption in the present era because it is cheap and free from sulfur impurities. Therefore, accurate and precise measurement of its composition is of fundamental importance for trade reasons. To improve the quality of NG gas measurements, certified reference materials (CRMs) should be used for calibration of measuring equipment in order to ensure the traceability of the measurement results to the SI units. For the traceability purpose, a multicomponent natural gas mixture was prepared gravimetrically as a reference material according to ISO 6142 from pure helium, hydrogen, n-pentane, i-pentane, n-butane, i-butane, propane, ethane, hexane, methane and nitrogen. The preparation was done in two dilution steps in 5 L aluminum cylinders. The calculated mole fractions and associated uncertainties of natural gas components were verified by a dual GC-FID/TCD system in accordance with ISO 6143 calibrated by a series of primary gas mixtures (CRMs) produced by an NMI. The results obtained by gravimetry and by GC measurements have been checked for compatibility as required by ISO 6142 and were found in very good agreement. Details of the preparation and calculation of the mole fractions and uncertainties of all gas components are explained in this article.

Development of a Certified Reference Material from Caffeine Solution for Assuring the Quality of Food and Drug Measurements

Caffeine intake by pregnant women, adults and children can be harmful to the health of all particularly fetuses if the intake exceeds the permissible limits. Therefore, it is of fundamental importance to measure its concentration accurately using certified reference materials (CRMs). In the literature, no scientific details are published about the certification of caffeine standard solutions, and therefore, the present article covers this gap. A batch of caffeine solution was prepared in concentration of 1000 mg/kg and bottled. Homogeneity and stability of the candidate reference material were assessed by HPLC-UV and the results showed that the material is homogenous and stable enough. Characterization of the caffeine reference material was performed by HPLC-UV, LC-MS/MS and UV-VIS-NIR spectrophotometer in three different days and the characterization uncertainty was estimated in accordance with the requirements of ISO GUM. The certified value (999.86 ± 8.57 mg/kg) was derived as a weighted mean from the gravimetry and the three characterization methods and the certified uncertainty was calculated according to ISO Guide 35. The produced CRM is of strong interest to the food and drug analytical laboratories for the validity and credibility of their caffeine measurement results.

Accurate and precise determination of lead isotope composition in selected geochemical reference materials

Lead(Pb)isotopes have been extensively employed in tracing sources of Pb and its transport pathways through the environment.However,Pb isotopic ratios in related geochemical reference materials are scarce.Here,we report high-precision Pb isotopic ratios measured by Nu Plasma II MC-ICP-MS using calibrated ^(205)Tl/^(203)Tl=2.38865(NIST SRM 997)for mass discrimination correction.The long-term external precision(2SD)for NISTSRM 981 of Pb,BCR-2,and BHVO-2 are 0.31‰(n=105),0.42‰(n=11),and 0.25‰(n=5)for ^(208)Pb/ ^(206)Pb and 0.16‰,0.53‰,and 0.07‰for ^(206)Pb/ ^(207)Pb,both respectively,and their Pb isotopic ratios are in excellent agreement with the recommended values.Using this method,we report for the first time Pb isotopic compositions in shale SGR-1b(USGS);coal CLB-1(USGS);stream sediments GSD-17,-21,and-23(IGGE);soils GSS-12,-13,-14,-15,and-16(IGGE);plants GSV-1,-2,and-3(IGGE);and human hair GSH-1(IGGE).

Preparation and Certification of a New Salvianolic Acid A Reference Material for Food and Drug Research

Salvianolic acid A(Sal A),a water-soluble ingredient in Danshen,has various biological activities.Sal A and its impurities have similar physical and chemical properties,as well as strong reducibility;therefore,they are difficult to prepare and purify.In this study,high-purity Sal A was obtained by purification of sephadex chromatography and preparative chromatography.Furthermore,HPLC-DAD tandem ECD and HPLC-DAD tandem MS methods were used for non-volatile organic impurity analysis,ICP-MS method was used for non-volatile inorganic impurities and mass balance method and quantitative nuclear magnetic resonance were employed to certify the product.The structures of Sal A and its relative impurities were validated by nuclear magnetic resonance spectroscopy and mass spectrometry,and their contents were quantified as well.Following the principles of ISO Guides 34:2009 and 35:2005,a Sal A reference material was certified,covering homogeneity studies,stability studies,characterization,and uncertainty estimations.

Titanium Isotope Analysis of Igneous Reference Materials using a Double-spike MC-ICP-MS Method

Ti separation was achieved by ion-exchange chromatography using Bio-Rad AG 1-X8 anion-exchange and DGA resins.For high-Fe/Ti and high-Mg/Ti igneous samples,a three-column procedure was required,whereas a two-column procedure was used for low-Fe/Ti and low-Mg/Ti igneous samples.The Ti isotopes were analysed by MC-ICP-MS,and instrumental mass bias was corrected using a ^(47)Ti-^(49)Ti double-spike technique.The ^(47)Ti-^(49)Ti double-spike and SRM 3162a were calibrated using SRM 979-Cr,certificated value ^(53)Cr/^(52)Crt rue=0.11339.Isobaric interference was evaluated by analysing Alfa-Ti doped with Na,Mg,Ca,and Mo,and results indicate that high concentrations of Na and Mg have no significant effect on Ti isotope analyses;however,Ca and Mo interferences lead to erroneousδ^(49/47)Ti values when Ca/Ti and Mo/Ti ratios exceed 0.01 and 0.1,respectively.Titanium isotopic compositions were determined for 12 igneous reference materials,BCR-2,BHVO-2,GBW07105,AGV-1,AGV-2,W-2,GBW07123,GBW07126,GBW07127,GBW07101,JP-1,and DTS-2b.Samples yieldδ^(49/47)Ti(‰)of−0.035±0.022,−0.038±0.031,0.031±0.022,0.059±0.038,0.044±0.037,0.000±0.015,0.154±0.044,−0.044±0.018,0.010±0.022,0.064±0.043,0.169±0.034,and−0.047±0.025(relative to OL-Ti,±2SD),respectively;of which isotopic compositions of DTS-2b,JP-1,GBW07101,GBW07105,GBW07123,GBW07126,and GBW07127 are reported for the first time.Standard Alfa-Ti was analysed repeatedly over a ten-month period,indicating a reproducibility of±0.047(2SD)forδ^(49/47)Ti,similar to the precisions obtained for geochemical reference materials.

Scanning proton microprobe microanalysis for the assessmentof homogeneity of IAEA urban dust reference materials

In order to develop new reference materials for microanalytical nuclear techniques, scanning proton microprobe (SPM) technique was used to determine homogeneity level within 100×200 μm 2 micro area on the small pieces of IAEA urban dust reference materials. The experimental methods were described in detail. The results show that IAEA 396A/M Vienna urban dust is homogeneous enough for small sample analysis of standard reference material (SRM).

Determination of CeO_2 , Dy_2O_3, CuO and PbO in Yttrium Oxide Reference Material by Isotope Dilution Spark Source Mass Spectrometry

This paper describes the quantitative determination of rare-earth elements cerium, dysprosium and non-rare-earth element copper, lead and the homogeneity examination of these four elements in yttrium oxide reference material by isotope dilution spark source mass spectrometry (ID-SSMS). The sensitivity of the meth- od is l0^(-5)～10^(-7%). The precision is better than 6%. The accuracy is better than 5%. The interferences of the spectra and the optimum amount of the spike added to the sample are discussed. The choice of the conducting material for the sample electrodes is studied.

REFERENCE MATERIALS

Potala PalaceConstruction of the Potala Palace began in the mid-7th century for the Tubo King Songtsan Gambo to greet his Han wife, Princess Wencheng. It comprised 999 rooms then, plus one built atop the Red Hill, which, said to have 1,000 rooms, was later destroyed by thunderbolts and wars. What we see today is a structure built during the 17th century.In the mid-17th century, the White House was added to the Potala Palace, which spread along the Red Hill in Lhasa.The palace is a structure of clay, wood and stone. The palace was the residence of the Dalai Lama of various generations. Beginning with the period of the 5th Dalai Lama, major religious and political ceremonies were held there.The palace covers a total area of 360,000 square meters, with major building rising 117 meters high in 13 floors, and extends some 360 meters from east to west.From 1989 to 1994, the State earmarked some 55 million Yuan and large quantities of gold and silver to repair the palace.In December 1994, the palace found its

The Role of the American Oil Chemists’Society in World Trade——Quality Assurance Testing,Certified Reference Materials,and International Liaison Activities

The American Oil Chemists’ Society(AOCS) is a volunteer-led association. AOCS develops and publishes methods of analysis for fats, oils, proteins, surfactants, and related materials according to accepted international standards to ensure equitable trade practices on a global scale. AOCS Official Method development has been going on for over a hundred years. The founding vision of AOCS in 1909 was "an organization designed for the development and advancement of analytical methods for cottonseed products." AOCS Official Methods are essential to world trade and are used to confirm the value of billions of pounds of oilseed-based commodities and finished products each year. In addition, AOCS conducts proficiency testing, provides certified reference materials, and collaborates with other standards developers including the International Organization for Standardization(ISO) and the Codex Alimentarius Commission. AOCS serves as a professional scientific membership organization providing current and emerging information as well as disseminating research results in oils, fats, lipids, proteins, surfactants, and related materials. Several avenues are used, especially meetings, publications, interest groups, networking opportunities, and web presence. Many scientists, experts, and others engaged in working in these fields find their professional "home" in AOCS. The AOCS Technical Leadership Committee comprises some of the most experienced AOCS members and scientists. The AOCS Technical Services department staff relies on this committee for guidance on scientific matters and for advice in prioritizing the opportunities facing AOCS.

Development of a certified reference material for visual inspection of unsound maize kernels

Maize unsound kernel content is one of the limited items in maize trade, and generally determined by sensory detection. A certified reference material(CRM) for visual inspection of maize unsound kernels was developed according to a national standard of China, GB 1353-2018, and five items, such as insect-damaged kernels, spotted kernels, broken kernels, sprouted kernels and moldy kernels, were included. Unsound maize kernels were collected from fields or prepared in a laboratory, then screened, and ten kernels demonstrating varying levels of unsoundness or damage for each item were embedded in epoxy resin. The CRM showed excellent homogeneity and stability, which was stable for 14 days at the temperature from-20℃ to 45℃ and for at least 18 months at room temperature out of direct sunlight and strong light. Co-laboratory confirmation showed the CRM conformed to the morphological characteristics described in GB 1353-2018. The research filled the gap of unsound maize kernel CRM in maize detection.

Preparation of Reference Material for Proficiency Test for Enumeration of Coliforms in Cheese Matrix

It is widely accepted that quantitative reference materials (RM), are indispensable tools for verification of the precision and accuracy of analytical measurements. The RM can be used by food microbiology laboratories, as part of their quality assurance programmes, to achieve their quality control. In Brazil, Anvisa RDC No. 12/01 specifies the enumeration of coliforms as one of the parameters for evaluating cheese quality. The aim of this study was to produce a quantitative RM for proficiency testing (PT) for use in the testing of enumeration of coliforms in cheese matrixes. A sample of an ultra-filtered cheese with a coliforms count of <3.0 MPN/g and a total n? of viable aerobes of 1.2 × 103 CFU/g was used as the matrix to produce the RM. The ultra-filtered cheese matrix was distributed in flasks, contaminated with a specific concentration of an Escherichia coli strain and submitted to freeze-drying. Sucrose was used as the cryo-protector. The RM produced was considered sufficiently homogeneous and stable at ≤ ?70?C during the entire study period (348 days). The material was also considered sufficiently stable at 4?C for six days, but instable at 30?C and 35?C for the same period. At ?20?C the RM was sufficiently stable for 161 days. It was concluded that the material showed all the necessary requirements for a quality RM to be used as PT items and could be transported to the laboratories taking part in a PT at up to 4?C for up to 6 days, since the results indicated maintenance of the cell concentrations during this period. This is the first study to describe a methodology for producing RM containing coliforms in a cheese matrix.

KV01 zircon—A potential New Archean reference material for microbeam U-Pb age and Hf-O isotope determinations

To meet the rapid development of zircon U-Pb geochronology and Hf-O isotope geochemistry,it is imperative to develop well-characterized zircon reference materials for microbeam analysis.Here,zircon KV01 separated from the Kaap Valley pluton,South Africa is introduced as a potential Archean reference material for microbeam U-Pb age and Hf-O isotope determination.SIMS and LA-ICP-MS U-Pb isotopic measurements gave grand mean 207Pb/206Pb ages of 3233±16 Ma(2 s,n=90)and 3230±26 Ma(2 s,n=52),which are consistent with reported CA-ID-TIMS results.Slight heterogeneity of oxygen isotopes is revealed by SIMS analyses that yielded a relatively largeδ18O range of 4.61–6.51‰.Among them,the zircon grains with clear oscillatory zones give a grand meanδ18O value of 6.17±0.33‰(2 s),which is suggested to record the primary O isotopic compositions.The homogeneity in the Hf isotopic compositions of KV01 zircon was checked by the laser ablation and solution MC-ICP-MS methods.They yielded consistent results with a recommended 176Hf/177Hf ratio of 0.280810±0.000013(2 s).The results reported here demonstrate that KV01 zircon could be a reliable reference material for microbeam 207Pb/206Pb age and Hf isotope determinations of ancient zircons,and be suitable as a quality monitor for SIMS oxygen isotopic analysis.

Development of a new ferulic acid certified reference material for use in clinical chemistry and pharmaceutical analysis

This study compares the results of three certified methods, namely differential scanning calorimetry (DSC), the mass balance (MB) method and coulometric titrimetry (CT), in the purity assessment of ferulic acid certified reference material (CRM). Purity and expanded uncertainty as determined by the three methods were respectively 99.81%, 0.16%; 99.797, 0.16%; and 99.81%, 0.26% with, in all cases, a coverage factor (k) of 2 (P=95%). The purity results are consistent indicating that the combination of DSC, the MB method and CT provides a confident assessment of the purity of suitable CRMs like ferulic acid. (C) 2015 Chinese Pharmaceutical Association and Institute of Materia Medica, Chinese Academy of Medical Sciences. Production and hosting by Elsevier B.V.

Preparation of bovine liver candidate reference material

The bovine liver candidate reference material specially for micro analytical techniques was prepared. The preparation process including material collection, dried, pulverize, sieve, homogenization and preliminary test was described in detail. The more effective grinding methods were established to achieve the median particle size of 22μm.

Reference Material

The East and West Changan Boulevard is a major traf-fic line from east to west before the Tiananmen Square inBeijing.When the city was made capital of the Ming Dynas-ty, a road was built on the old site in the southern city wallof the Yuan Dynasty capital in Chengtian Gate (nowTiananmen). The road was divided into two sections at theChangan Left and Changan Right Gates of the imperialcity. The east of the Changan Left Gate was called EastChangan Boulevard and west of the Changan Right

Precise and accurate Ga isotope ratio measurements of geological samples by multi-collector inductively coupled plasma mass spectrometry

Gallium isotope is a potential geochemical tool for understanding planetary processes,environmental pollution,and ore deposit formation.The reported Ga isotope compositions(δ^(71)Ga NIST994 values)of some international geological standards,such as BCR-2 and BHVO-2 basalts,exhibit inconsistencies between diff erent laboratories.During mass spectrometry analysis,we found thatδ^(71)Ga NIST994 values of geological standards with or without the correction of the interference of^(138)Ba^(2+)(mass/charge ratio=69)on 69 Ga show signifi cant isotope off sets,and thus effi cient separation of Ba and correcting the interference of^(138)Ba^(2+)are both crucial to obtain accurateδ^(71)Ga values.By comparingδ^(71)Ga NIST994 values(relative to NIST SRM 994 Ga)of the same geostandards from diff erent laboratories,we suggest that the isotopic heterogeneity from NIST SRM 994 Ga is one of the key reasons for the inconsistencies inδ^(71)Ga NIST994 values of BCR-2 and BHVO-2.To facilitate inter-laboratory comparisons,we measured the Ga isotopic compositions of 11 geological reference materials(including Pb-Zn ore,bauxite,igneous rocks,and loess)and two Ga solution standards(NIST SRM 3119a and Alfa Aesar).Theδ^(71)Ga NIST994 andδ^(71)Ga IPGP values of these reference materials vary from 1.12‰to 2.63‰and−0.13‰to 1.38‰,respectively,and can be used to evaluate the precision and accuracy of Ga isotope data from diff erent laboratories.

Determination of Hf–Sr–Nd isotopic ratios by MC-ICP-MS using rapid acid digestion after flux-free fusion in geological materials

In this study, we established a rapid acid digestion for determining Hf-Sr-Nd isotopic ratios of geological samples by using MC-ICP-MS. Conditions of 1600 ℃ for 1 min and 1400 ℃ for 1 min were adopted for fusing intrusive rocks and extrusive rocks, respectively. The rapid acid digestion technique is superior in digestion time compared with high-pressure PTFE bomb method. The procedural blanks of the method were also lower than that flux fusion. Replicate analyses of international certified reference materials （CRMs） indicate that isotopic ratios of ^176Hf/^177Hf, ^87Sr/^86Sr and 143Nd/144Nd agree well with previously published data. The external reproducibility （2SD, n = 5） of ten CRMs are ±0.000030 for ^87Sr/^86Sr, ± 0.000030 for ^143Nd/^144Nd, and ±0.000018 for ^176Hf/^177Hf.