A hybrid neural network model,in which RH process(theoretical)model is combined organically with neural network(NN)and case-base reasoning(CBR),was established.The CBR method was used to select the operation mode and ...A hybrid neural network model,in which RH process(theoretical)model is combined organically with neural network(NN)and case-base reasoning(CBR),was established.The CBR method was used to select the operation mode and the RH operational guide parameters for different steel grades according to the initial conditions of molten steel,and a three-layer BP neural network was adopted to deal with nonlinear factors for improving and compensating the limitations of technological model for RH process control and end-point prediction.It was verified that the hybrid neural network is effective for improving the precision and calculation efficiency of the model.展开更多
Three-dimensional thermal a nalysis simulation of a horizontal zone refining system is conducted for germanimn semiconductor materials. The considered geometry includes a g'ral)hite boat filled with germanium placed...Three-dimensional thermal a nalysis simulation of a horizontal zone refining system is conducted for germanimn semiconductor materials. The considered geometry includes a g'ral)hite boat filled with germanium placed in a cylindrical quartz tube. A flow of Ar and H2 gas mixture is purged througll the tube. A narrow section of the, boat is assmned to be exposed to a constant heat rate produced b v an rf coil located outside the quartz tube. The results of this analysis provide essential information about various parameters such as the shape of tile molten zone, required power and temperature gradient in the system.展开更多
This study carried out on the soybean oil samples taken from the processing lines during refining process (degumming, neutralization, bleaching and deodorization process) for crude soybean oil as well as on color reve...This study carried out on the soybean oil samples taken from the processing lines during refining process (degumming, neutralization, bleaching and deodorization process) for crude soybean oil as well as on color reversed oil after deodorization step during storage for several hours to study the physical and chemical properties (color, refractive index (RI), free fatty acid (FFA), peroxide value (PV), p-Anisidine value (p-AV), total oxidative (TOTOX) value, oxidative stability (OS), saponification value (SV), iodine value (IV), unsaponifiable matter (unsap. %), soap content, minerals, waxes, total phenols content, K<sub>232</sub> and k<sub>270</sub> nm), the fatty acids composition, sterol compound, total tocopherols and their components (α, β, γ and δ tocopherol) and tocored compound for these oils and to find out the reason for the color reversion after a short period from storage for the deodorized soybean oil. Citric acid has been added (0.2%) to each color reversed and neutralized soybean oils, then procedure of bleaching and deodorization process on them, and studied its effect on the physical and chemical properties for them specially the color units (red and yellow), tocopherols contents and tocored compound. The results showed that refining process for soybean oil caused to a gradual decrease in values of AV, oxidative stability, IV, wax, % Unsapo., K<sub>232</sub> and K<sub>270</sub> nm, total polyphenols, minerals (P, Ca and Mg), total tocopherols and their compounds (α, β, γ and δ tocopherol) and also caused decrease in all sterol components, but they showed a few differences in percentages of fatty acids as result refining process. Color values (red and yellow unites) recorded gradually decreased during refining process, but these values were increased in deodorized soybean oil after storage (color reversed soybean oil). Reduction of α, β, γ and δ tocopherol contents was found to be linearly with the increase of red and yellow color units (color darking). The tocored is responsible for the color reversion phenomenon, where as maximum amount of tocored was in crude soybean oil 169.2 ppm, which gradually decreased during refining process 120.35, 99.82, 20.25, and 8.46 ppm, respectively, but it was found to be 46.5 ppm in color reversed soybean oil. Addition of citric acid (0.2%) related to the removal of tocored from soybean oil during the bleaching and deodorization process of soybean oil before and after color reversion in parallel with the significant decrease in the color values.展开更多
WHILE much of Africa's oil production is exported in its crude form, Uganda is primed to build its own oil refinery. This ambition is set to be realized after the China National Offshore Oil Corp. (CNOOC) struck a ...WHILE much of Africa's oil production is exported in its crude form, Uganda is primed to build its own oil refinery. This ambition is set to be realized after the China National Offshore Oil Corp. (CNOOC) struck a $2-billion licensing deal to develop a vast petroleum field in Uganda. Signed in late September, it was the first oil production license to be issued in Uganda,展开更多
Since the current slagging of argon blowing refining process is relatively fixed,which cannot adapt to the fluctuation of converter smelting process,it poses the problems of poor metallurgical property of refining sla...Since the current slagging of argon blowing refining process is relatively fixed,which cannot adapt to the fluctuation of converter smelting process,it poses the problems of poor metallurgical property of refining slag and a large amount of molten heel.An optimization system coupled with multiple models was proposed to dynamic control the ladle slagging in the argon blowing refining process.It can compile the optimal dynamic slagging scheme in real time under the guarantee of deoxidation performance and reasonable fluidity.The argon blowing refining slag composition range of CaO/Al_(2)O_(3)=1.3-1.7,CaO/SiO_(2)=6-12,w(MgO)=2%-6% was determined based on FeO activity and liquidus temperature by equilibrium thermodynamic calculation.In addition,it demonstrated better performance in the viscosity prediction task of the presented Visual Geometry Group 16-like one-dimensional convolutional neural network deep learning algorithm versus the Random Forest ensemble learning algorithm,as the adjusted coefficients of determination were 0.9712 and 0.9637,respectively.After the system was applied in operation,the argon blowing refining process was stable,and the steel yield was enhanced,which promoted the intelligent steelmaking level while achieving the cost reduction and efficiency improvement.展开更多
Ti-stabilized 321 stainless steel was prepared using an electric arc furnace, argon oxygen decarburization (AOD) furnace, ladle furnace (LF), and continuous casting processes. In addition, the effect of refining proce...Ti-stabilized 321 stainless steel was prepared using an electric arc furnace, argon oxygen decarburization (AOD) furnace, ladle furnace (LF), and continuous casting processes. In addition, the effect of refining process and utilization of different slags on the evolution of inclusions, titanium yield, and oxygen content was systematically investigated by experimental and thermodynamic analysis. The results reveal that the total oxygen content (TO) and inclusion density decreased during the refining process. The spherical CaO–SiO2–Al2O3–MgO inclusions existed in the 321 stainless steel after the AOD process. Moreover, prior to the Ti addition, the spherical CaO–Al2O3–MgO–SiO2 inclusions were observed during LF refining pro-cess. However, Ti addition resulted in multilayer CaO–Al2O3–MgO–TiOx inclusions. Two different samples were prepared by conventional CaO–Al2O3-based slag (Heat-1) and -TiO2-rich CaO–Al2O3-based slag (Heat-2). The statistical analysis revealed that the density of inclusions and the -TiOx content in CaO–Al2O3–MgO–TiOx inclusions found in Heat-2 sample are much lower than those in the Heat-1 sample. Furthermore, the TO content and Ti yield during the LF refining process were controlled by using -TiO2-rich calcium aluminate synthetic slag. These results were consistent with the ion–molecule coexist-ence theory and FactSage?7.2 software calculations. When -TiO2-rich CaO–Al2O3-based slag was used, the -TiO2 activity of the slag increased, and the equilibrium oxygen content significantly decreased from the AOD to LF processes. Therefore, the higher -TiO2 activity of slag and lower equilibrium oxygen content suppressed the undesirable reactions between Ti and O.展开更多
The query space of a similarity query is usually narrowed down by pruning inactive query subspaces which contain no query results and keeping active query subspaces which may contain objects corre- sponding to the req...The query space of a similarity query is usually narrowed down by pruning inactive query subspaces which contain no query results and keeping active query subspaces which may contain objects corre- sponding to the request. However, some active query subspaces may contain no query results at all, those are called false active query subspaces. It is obvious that the performance of query processing degrades in the presence of false active query subspaces. Our experiments show that this problem becomes seriously when the data are high dimensional and the number of accesses to false active subspaces increases as the dimensionality increases. In order to solve this problem, this paper proposes a space mapping approach to reducing such unnecessary accesses. A given query space can be refined by filtering within its mapped space. To do so, a mapping strategy called maxgap is proposed to improve the efficiency of the refinement processing. Based on the mapping strategy, an index structure called MS-tree and algorithms of query processing are presented in this paper. Finally, the performance of MS-tree is compared with that of other competitors in terms of range queries on a real data set.展开更多
Objectives:Polycyclic aromatic hydrocarbons(PAHs)and 3-monochloropropane-1,2-diol ester(3-MCPDE)were studied in camellia oil.It is important to study the changes in the content of PAHs and 3-MCPDE at different refinin...Objectives:Polycyclic aromatic hydrocarbons(PAHs)and 3-monochloropropane-1,2-diol ester(3-MCPDE)were studied in camellia oil.It is important to study the changes in the content of PAHs and 3-MCPDE at different refining stages(from crude oil to the final refined oil product)to elucidate the influence of the refining procedures on their change.Materials and methods:The PAHs and 3-MCPDE in camellia oil from different refining stages(from crude oil to the product)of a plant were analyzed by gas chromatography–mass spectrometry and calculated by the internal standard method.Results:The overall PAH content was(79.64±2.43)μg/kg in crude camellia oil.After refining treatment,the PAH content decreased to(18.75±0.55)μg/kg.The 3-MCPDE content increased during the refining process from 0 mg/kg in the crude oil to 4.62 mg/kg in the refined oil product.Conclusions:This is the first study to simultaneously monitor changes in both PAH and 3-MCPDE contents during the production of camellia oil.These results confirmed the effectiveness of the refining method on PAH removal and the increase in 3-MCPDE at high temperature.It is suggested that novel processing methods or refining parameters need further optimization to decrease the overall concentrations of PAHs and 3-MCPDE in camellia oil.展开更多
This study focused on the manufacture of microcrystalline cellulose(MCC)from wheat straw using environmentally-friendly solvents.Raw cellulose was separated from wheat straw after thermal decomposition of lignin follo...This study focused on the manufacture of microcrystalline cellulose(MCC)from wheat straw using environmentally-friendly solvents.Raw cellulose was separated from wheat straw after thermal decomposition of lignin followed by dissolution of lignin using a recyclable ethanol/acetic acid/water solvent system.Then,pure cellulose was produced using a four-step refining process,including chelating,O_(3),H_(2)O_(2),and xylanase treatments.Finally,MCC was obtained through hydrolysis,drying,and mechanical treatments.The effects of acetic acid,O_(3),H_(2)O_(2),NaOH,pretreatment time,and temperature on the properties of wheat straw cellulose(including Kappa number,yield,α-cellulose content,crystallinity,KMnO4 value,degree of polymerization(DP),and brightness)were investigated.The results showed that the addition of acetic acid enhanced lignin removal and hemicellulose degradation,improving the purity of the raw cellulose.The optimized acetic acid dosage in the wheat straw thermal decomposition step was 2%(w/w).The optimized O_(3)dosage was 1.2%(w/w).The optimized conditions for H_(2)O_(2)treatment were found to be 3%(w/w)H_(2)O_(2)and 1.8%(w/w)NaOH at 70°C for 120 min.The KMnO4 value was 2.0,brightness was 84.1%ISO,the viscosity was 934 mL/g,and the DP was 626 for refined cellulose.Xylanase effectively improved theα-cellulose content of wheat straw cellulose.With an optimized xylanase dosage of 1.5 IU/g,theα-cellulose content was 94.7%,the brightness was 85.6%ISO,and the DP was 615 for wheat straw cellulose.展开更多
基金Item Sponsored by National Natural Science Foundation of China(50074026)
文摘A hybrid neural network model,in which RH process(theoretical)model is combined organically with neural network(NN)and case-base reasoning(CBR),was established.The CBR method was used to select the operation mode and the RH operational guide parameters for different steel grades according to the initial conditions of molten steel,and a three-layer BP neural network was adopted to deal with nonlinear factors for improving and compensating the limitations of technological model for RH process control and end-point prediction.It was verified that the hybrid neural network is effective for improving the precision and calculation efficiency of the model.
文摘Three-dimensional thermal a nalysis simulation of a horizontal zone refining system is conducted for germanimn semiconductor materials. The considered geometry includes a g'ral)hite boat filled with germanium placed in a cylindrical quartz tube. A flow of Ar and H2 gas mixture is purged througll the tube. A narrow section of the, boat is assmned to be exposed to a constant heat rate produced b v an rf coil located outside the quartz tube. The results of this analysis provide essential information about various parameters such as the shape of tile molten zone, required power and temperature gradient in the system.
文摘This study carried out on the soybean oil samples taken from the processing lines during refining process (degumming, neutralization, bleaching and deodorization process) for crude soybean oil as well as on color reversed oil after deodorization step during storage for several hours to study the physical and chemical properties (color, refractive index (RI), free fatty acid (FFA), peroxide value (PV), p-Anisidine value (p-AV), total oxidative (TOTOX) value, oxidative stability (OS), saponification value (SV), iodine value (IV), unsaponifiable matter (unsap. %), soap content, minerals, waxes, total phenols content, K<sub>232</sub> and k<sub>270</sub> nm), the fatty acids composition, sterol compound, total tocopherols and their components (α, β, γ and δ tocopherol) and tocored compound for these oils and to find out the reason for the color reversion after a short period from storage for the deodorized soybean oil. Citric acid has been added (0.2%) to each color reversed and neutralized soybean oils, then procedure of bleaching and deodorization process on them, and studied its effect on the physical and chemical properties for them specially the color units (red and yellow), tocopherols contents and tocored compound. The results showed that refining process for soybean oil caused to a gradual decrease in values of AV, oxidative stability, IV, wax, % Unsapo., K<sub>232</sub> and K<sub>270</sub> nm, total polyphenols, minerals (P, Ca and Mg), total tocopherols and their compounds (α, β, γ and δ tocopherol) and also caused decrease in all sterol components, but they showed a few differences in percentages of fatty acids as result refining process. Color values (red and yellow unites) recorded gradually decreased during refining process, but these values were increased in deodorized soybean oil after storage (color reversed soybean oil). Reduction of α, β, γ and δ tocopherol contents was found to be linearly with the increase of red and yellow color units (color darking). The tocored is responsible for the color reversion phenomenon, where as maximum amount of tocored was in crude soybean oil 169.2 ppm, which gradually decreased during refining process 120.35, 99.82, 20.25, and 8.46 ppm, respectively, but it was found to be 46.5 ppm in color reversed soybean oil. Addition of citric acid (0.2%) related to the removal of tocored from soybean oil during the bleaching and deodorization process of soybean oil before and after color reversion in parallel with the significant decrease in the color values.
文摘WHILE much of Africa's oil production is exported in its crude form, Uganda is primed to build its own oil refinery. This ambition is set to be realized after the China National Offshore Oil Corp. (CNOOC) struck a $2-billion licensing deal to develop a vast petroleum field in Uganda. Signed in late September, it was the first oil production license to be issued in Uganda,
基金the fund support from the Natural Science Foundation of Anhui Provincial Education Department(KJ2021A0358)the National Natural Science Foundation of China(51804004).
文摘Since the current slagging of argon blowing refining process is relatively fixed,which cannot adapt to the fluctuation of converter smelting process,it poses the problems of poor metallurgical property of refining slag and a large amount of molten heel.An optimization system coupled with multiple models was proposed to dynamic control the ladle slagging in the argon blowing refining process.It can compile the optimal dynamic slagging scheme in real time under the guarantee of deoxidation performance and reasonable fluidity.The argon blowing refining slag composition range of CaO/Al_(2)O_(3)=1.3-1.7,CaO/SiO_(2)=6-12,w(MgO)=2%-6% was determined based on FeO activity and liquidus temperature by equilibrium thermodynamic calculation.In addition,it demonstrated better performance in the viscosity prediction task of the presented Visual Geometry Group 16-like one-dimensional convolutional neural network deep learning algorithm versus the Random Forest ensemble learning algorithm,as the adjusted coefficients of determination were 0.9712 and 0.9637,respectively.After the system was applied in operation,the argon blowing refining process was stable,and the steel yield was enhanced,which promoted the intelligent steelmaking level while achieving the cost reduction and efficiency improvement.
基金The authors gratcfully acknowledge the sup-port of the National Natural Science Foundation of China(Grant No.51374020)the State Key Laboratory of Advanced Metallurgy at theUniversity of Science and Technology Beijing(USTB)the JiuquanIron and Steel Group Corporation.
文摘Ti-stabilized 321 stainless steel was prepared using an electric arc furnace, argon oxygen decarburization (AOD) furnace, ladle furnace (LF), and continuous casting processes. In addition, the effect of refining process and utilization of different slags on the evolution of inclusions, titanium yield, and oxygen content was systematically investigated by experimental and thermodynamic analysis. The results reveal that the total oxygen content (TO) and inclusion density decreased during the refining process. The spherical CaO–SiO2–Al2O3–MgO inclusions existed in the 321 stainless steel after the AOD process. Moreover, prior to the Ti addition, the spherical CaO–Al2O3–MgO–SiO2 inclusions were observed during LF refining pro-cess. However, Ti addition resulted in multilayer CaO–Al2O3–MgO–TiOx inclusions. Two different samples were prepared by conventional CaO–Al2O3-based slag (Heat-1) and -TiO2-rich CaO–Al2O3-based slag (Heat-2). The statistical analysis revealed that the density of inclusions and the -TiOx content in CaO–Al2O3–MgO–TiOx inclusions found in Heat-2 sample are much lower than those in the Heat-1 sample. Furthermore, the TO content and Ti yield during the LF refining process were controlled by using -TiO2-rich calcium aluminate synthetic slag. These results were consistent with the ion–molecule coexist-ence theory and FactSage?7.2 software calculations. When -TiO2-rich CaO–Al2O3-based slag was used, the -TiO2 activity of the slag increased, and the equilibrium oxygen content significantly decreased from the AOD to LF processes. Therefore, the higher -TiO2 activity of slag and lower equilibrium oxygen content suppressed the undesirable reactions between Ti and O.
基金Supported by National Basic Research Program of China (Grant No.2006CB303103)the National Natural Science Foundation of China (Grant Nos.60873011,60802026,60773219,60773021)the High Technology Program (Grant No.2007AA01Z192)
文摘The query space of a similarity query is usually narrowed down by pruning inactive query subspaces which contain no query results and keeping active query subspaces which may contain objects corre- sponding to the request. However, some active query subspaces may contain no query results at all, those are called false active query subspaces. It is obvious that the performance of query processing degrades in the presence of false active query subspaces. Our experiments show that this problem becomes seriously when the data are high dimensional and the number of accesses to false active subspaces increases as the dimensionality increases. In order to solve this problem, this paper proposes a space mapping approach to reducing such unnecessary accesses. A given query space can be refined by filtering within its mapped space. To do so, a mapping strategy called maxgap is proposed to improve the efficiency of the refinement processing. Based on the mapping strategy, an index structure called MS-tree and algorithms of query processing are presented in this paper. Finally, the performance of MS-tree is compared with that of other competitors in terms of range queries on a real data set.
基金funded by the Key Research and Development Program of Guangdong Province(No.2019B020212001)Zhejiang Basic Public Welfare Research Project(LGN19C200003)+1 种基金the National Key Research and Development Program of China(2018YFC1603600)National Natural Science Foundation of China(No.31871884).
文摘Objectives:Polycyclic aromatic hydrocarbons(PAHs)and 3-monochloropropane-1,2-diol ester(3-MCPDE)were studied in camellia oil.It is important to study the changes in the content of PAHs and 3-MCPDE at different refining stages(from crude oil to the final refined oil product)to elucidate the influence of the refining procedures on their change.Materials and methods:The PAHs and 3-MCPDE in camellia oil from different refining stages(from crude oil to the product)of a plant were analyzed by gas chromatography–mass spectrometry and calculated by the internal standard method.Results:The overall PAH content was(79.64±2.43)μg/kg in crude camellia oil.After refining treatment,the PAH content decreased to(18.75±0.55)μg/kg.The 3-MCPDE content increased during the refining process from 0 mg/kg in the crude oil to 4.62 mg/kg in the refined oil product.Conclusions:This is the first study to simultaneously monitor changes in both PAH and 3-MCPDE contents during the production of camellia oil.These results confirmed the effectiveness of the refining method on PAH removal and the increase in 3-MCPDE at high temperature.It is suggested that novel processing methods or refining parameters need further optimization to decrease the overall concentrations of PAHs and 3-MCPDE in camellia oil.
基金the Doctoral Program of Higher Education Projects(for the priority development areas)by Ministry of Education of China(Grant No.20126125130001)State Key Laboratory of Pulp and Paper Engineering open foundation(Grant No.201505)the Doctoral Scientific Research Foundation(Grant No.BJ13-02)by Shaanxi University of Science and Technology.
文摘This study focused on the manufacture of microcrystalline cellulose(MCC)from wheat straw using environmentally-friendly solvents.Raw cellulose was separated from wheat straw after thermal decomposition of lignin followed by dissolution of lignin using a recyclable ethanol/acetic acid/water solvent system.Then,pure cellulose was produced using a four-step refining process,including chelating,O_(3),H_(2)O_(2),and xylanase treatments.Finally,MCC was obtained through hydrolysis,drying,and mechanical treatments.The effects of acetic acid,O_(3),H_(2)O_(2),NaOH,pretreatment time,and temperature on the properties of wheat straw cellulose(including Kappa number,yield,α-cellulose content,crystallinity,KMnO4 value,degree of polymerization(DP),and brightness)were investigated.The results showed that the addition of acetic acid enhanced lignin removal and hemicellulose degradation,improving the purity of the raw cellulose.The optimized acetic acid dosage in the wheat straw thermal decomposition step was 2%(w/w).The optimized O_(3)dosage was 1.2%(w/w).The optimized conditions for H_(2)O_(2)treatment were found to be 3%(w/w)H_(2)O_(2)and 1.8%(w/w)NaOH at 70°C for 120 min.The KMnO4 value was 2.0,brightness was 84.1%ISO,the viscosity was 934 mL/g,and the DP was 626 for refined cellulose.Xylanase effectively improved theα-cellulose content of wheat straw cellulose.With an optimized xylanase dosage of 1.5 IU/g,theα-cellulose content was 94.7%,the brightness was 85.6%ISO,and the DP was 615 for wheat straw cellulose.