Correction of microwave pulse reflection by digital filters in superconducting quantum circuits

Reducing the control error is vital for high-fidelity digital and analog quantum operations.In superconducting circuits,one disagreeable error arises from the reflection of microwave signals due to impedance mismatch in the control chain.Here,we demonstrate a reflection cancelation method when considering that there are two reflection nodes on the control line.We propose to generate the pre-distortion pulse by passing the envelopes of the microwave signal through digital filters,which enables real-time reflection correction when integrated into the field-programmable gate array(FPGA).We achieve a reduction of single-qubit gate infidelity from 0.67%to 0.11%after eliminating microwave reflection.Real-time correction of microwave reflection paves the way for precise control and manipulation of the qubit state and would ultimately enhance the performance of algorithms and simulations executed on quantum processors.

Development and prospect of acoustic reflection imaging logging processing and interpretation method

Acoustic reflection imaging logging technology can detect and evaluate the development of reflection anomalies,such as fractures,caves and faults,within a range of tens of meters from the wellbore,greatly expanding the application scope of well logging technology.This article reviews the development history of the technology and focuses on introducing key methods,software,and on-site applications of acoustic reflection imaging logging technology.Based on the analyses of major challenges faced by existing technologies,and in conjunction with the practical production requirements of oilfields,the further development directions of acoustic reflection imaging logging are proposed.Following the current approach that utilizes the reflection coefficients,derived from the computation of acoustic slowness and density,to perform seismic inversion constrained by well logging,the next frontier is to directly establish the forward and inverse relationships between the downhole measured reflection waves and the surface seismic reflection waves.It is essential to advance research in imaging of fractures within shale reservoirs,the assessment of hydraulic fracturing effectiveness,the study of geosteering while drilling,and the innovation in instruments of acoustic reflection imaging logging technology.

The multi-peak point phenomenon of broadband microwave reflection caused by inhomogeneous plasma

During spacecraft re-entry,the challenge of measuring plasma sheath parameters directly contributes to difficulties in addressing communication blackout.In this work,we have discovered a phenomenon of multiple peaks in reflection data caused by the inhomogeneous plasma.Simulation results show that the multi-peak points fade away as the characteristic frequency is approached,resembling a series of gradually decreasing peaks.The positions and quantities of these points are positively correlated with electron density,yet they show no relation to collision frequency.This phenomenon is of significant reference value for future studies on the spatial distribution of plasmas,particularly for using microwave reflection signals in diagnosing the plasma sheath.

Investigation of reflection anisotropy induced by micropipe defects on the surface of a 4H-SiC single crystal using scanning anisotropy microscopy

Optical reflection anisotropy microscopy mappings of micropipe defects on the surface of a 4H-SiC single crystal are studied by the scanning anisotropy microscopy(SAM)system.The reflection anisotropy(RA)image with a'butterfly pattern'is obtained around the micropipes by SAM.The RA image of the edge dislocations is theoretically simulated based on dislocation theory and the photoelastic principle.By comparing with the Raman spectrum,it is verified that the micropipes consist of edge dislocations.The different patterns of the RA images are due to the different orientations of the Burgers vectors.Besides,the strain distribution of the micropipes is also deduced.One can identify the dislocation type,the direction of the Burgers vector and the optical anisotropy from the RA image by using SAM.Therefore,SAM is an ideal tool to measure the optical anisotropy induced by the strain field around a defect.

Wave Reflection by Rectangular Breakwaters for Coastal Protection

In this study,we focus on the numerical modelling of the interaction between waves and submerged structures in the presence of a uniform flow current.Both the same and opposite senses of wave propagation are considered.The main objective is an understanding of the effect of the current and various geometrical parameters on the reflection coefficient.The wave used in the study is based on potential theory,and the submerged structures consist of two rectangular breakwaters positioned at a fixed distance from each other and attached to the bottom of a wave flume.The numerical modeling approach employed in this work relies on the Boundary Element Method(BEM).The results are compared with experimental data to validate the approach.The findings of the study demonstrate that the double rectangular breakwater configuration exhibits superior wave attenuation abilities if compared to a single rectangular breakwater,particularly at low wavenumbers.Furthermore,the study reveals that wave mitigation is more pronounced when the current and wave propagation are coplanar,whereas it is less effective in the case of opposing current.

The influence of reflections from the train body and the ground on the sound radiation from a railway rail

Purpose – The vibration of the rails is a significant source of railway rolling noise, often forming the dominantcomponent of noise in the important frequency region between 400 and 2000 Hz. The purpose of the paper is toinvestigate the influence of the ground profile and the presence of the train body on the sound radiation fromthe rail.Design/methodology/approach – Two-dimensional boundary element calculations are used, in which therail vibration is the source. The ground profile and various different shapes of train body are introduced in themodel, and results are observed in terms of sound power and sound pressure. Comparisons are also made withvibro-acoustic measurements performed with and without a train present.Findings – The sound radiated by the rail in the absence of the train body is strongly attenuated by shieldingdue to the ballast shoulder. When the train body is present, the sound from the vertical rail motion is reflectedback down toward the track where it is partly absorbed by the ballast. Nevertheless, the sound pressure at thetrackside is increased by typically 0–5 dB. For the lateral vibration of the rail, the effects are much smaller. Oncethe sound power is known, the sound pressure with the train present can be approximated reasonably well withsimple line source directivities.Originality/value – Numerical models used to predict the sound radiation from railway rails have generallyneglected the influence of the ground profile and reflections from the underside of the train body on the soundpower and directivity of the rail. These effects are studied in a systematic way including comparisons with measurements.

Conversion hip arthroplasty for failed nailing of intertrochanteric fracture: Reflections on some important aspects

In this editorial,I present my comments on the article by Solarino et al.Conversion hip arthroplasty,which is an optional salvage procedure performed following unsuccessful fixation of intertrochanteric femur fractures in elderly pati-ents,entails more complex processes and higher rates of operative complications than primary arthroplasty.Hence,it is important to consider the appropriateness of the primary treatment choice,as well as the adequacy of nailing fixation for intertrochanteric fractures.This article briefly analyzes the possible factors contributing to the nailing failure of intertrochanteric fractures and attempts to find corresponding countermeasures to prevent fixation failures.It also analyzes the choice of treatment between nailing fixation and primary arthroplasty for intertrochanteric fractures.

Graded and Quantitative Technology and Application of Coal-Bearing Reservoir Based on Seismic Reflection Characteristics

Taiyuan formation is the main exploration strata in Ordos Basin, and coals are widely developed. Due to the interference of strong reflection of coals, we cannot completely identify the effective reservoir information of coal-bearing reservoir on seismic data. Previous researchers have studied the reservoir by stripping or weakening the strong reflection, but it is difficult to determine the effectiveness of the remaining reflection seismic data. In this paper, through the establishment of 2D forward model of coal-bearing strata, the corresponding geophysical characteristics of different reflection types of coal-bearing strata are analyzed, and then the favorable sedimentary facies zones for reservoir development are predicted. On this basis, combined with seismic properties, the coal-bearing reservoir is quantitatively characterized by seismic inversion. The above research shows that the Taiyuan formation in LS block of Ordos Basin is affected by coals and forms three or two peaks in different locations. The reservoir plane sedimentary facies zone is effectively characterized by seismic reflection structure. Based on the characteristics of sedimentary facies belt and petrophysical analysis, the reservoir is semi quantitatively characterized by attribute analysis and waveform indication, and quantitatively characterized by pre stack geostatistical inversion. Based on the forward analysis of coal measure strata, this technology characterizes the reservoir facies belt through seismic reflection characteristics, and describes coal measure reservoirs step by step. It effectively guides the exploration of LS block in Ordos Basin, and has achieved good practical application effect.

A crosstalk-free dual-mode sweat sensing system for naked-eye sweat loss quantification via changes in structural reflectance

Sweat loss monitoring is important for understanding the body’s thermoregulation and hydration status,as well as for comprehensive sweat analysis.Despite recent advances,developing a low-cost,scalable,and universal method for the fabrication of colorimetric microfluidics designed for sweat loss monitoring remains challenging.In this study,we propose a novel laserengraved surface roughening strategy for various flexible substrates.This process permits the construction of microchannels that show distinct structural reflectance changes before and after sweat filling.By leveraging these unique optical properties,we have developed a fully laser-engraved microfluidic device for the quantification of naked-eye sweat loss.This sweat loss sensor is capable of a volume resolution of 0.5µL and a total volume capacity of 11µL,and can be customized to meet different performance requirements.Moreover,we report the development of a crosstalk-free dual-mode sweat microfluidic system that integrates an Ag/AgCl chloride sensor and a matching wireless measurement flexible printed circuit board.This integrated system enables the real-time monitoring of colorimetric sweat loss signals and potential ion concentration signals without crosstalk.Finally,we demonstrate the potential practical use of this microfluidic sweat loss sensor and its integrated system for sports medicine via on-body studies.

Configurations of Shock Regular Reflection by Straight Wedges

We are concerned with the shock regular reflection configurations of unsteady global solutions for a plane shock hitting a symmetric straight wedge.It has been known that patterns of the shock reflection are various and complicated,including the regular and the Mach reflection.Most of the fundamental issues for the shock reflection have not been understood.Recently,there are great progress on the mathematical theory of the shock regular reflection problem,especially for the global existence,uniqueness,and structural stability of solutions.In this paper,we show that there are two more possible configurations of the shock regular reflection besides known four configurations.We also give a brief proof of the global existence of solutions.

Cooperative User-Scheduling and Resource Allocation Optimization for Intelligent Reflecting Surface Enhanced LEO Satellite Communication

Lower Earth Orbit(LEO) satellite becomes an important part of complementing terrestrial communication due to its lower orbital altitude and smaller propagation delay than Geostationary satellite. However, the LEO satellite communication system cannot meet the requirements of users when the satellite-terrestrial link is blocked by obstacles. To solve this problem, we introduce Intelligent reflect surface(IRS) for improving the achievable rate of terrestrial users in LEO satellite communication. We investigated joint IRS scheduling, user scheduling, power and bandwidth allocation(JIRPB) optimization algorithm for improving LEO satellite system throughput.The optimization problem of joint user scheduling and resource allocation is formulated as a non-convex optimization problem. To cope with this problem, the nonconvex optimization problem is divided into resource allocation optimization sub-problem and scheduling optimization sub-problem firstly. Second, we optimize the resource allocation sub-problem via alternating direction multiplier method(ADMM) and scheduling sub-problem via Lagrangian dual method repeatedly.Third, we prove that the proposed resource allocation algorithm based ADMM approaches sublinear convergence theoretically. Finally, we demonstrate that the proposed JIRPB optimization algorithm improves the LEO satellite communication system throughput.

Reflection Loss is a Parameter for Film,not Material

In studies of microwave absorption in the current literature,theories such as reflection loss,impedance matching,the delta function,and the quarter-wavelength model have been inappropriately applied.As shown in this case study,these problems need to be corrected as they are representative of similar work in the literature.

Rigorous solution to second harmonic generation considering transmission and reflection of light at air–crystal interface

Considering the transmission and reflection of TE-polarized pump light at the air–crystal interface,the second harmonic generation(SHG)in a lithium niobate(LN)crystal is investigated theoretically and systematically in this work.In previous studies,the theoretical analyses of reflection and transmission of incident wave in the process of nonlinear frequency conversion were not considered in LN crystal on account of the complicated calculations.First,we establish a physical picture describing that a beam of light in TE mode transports in the LN crystal considering transmission and reflection at the crystal surface and generates nonlinear second-order optical polarization in crystal.Then we analytically derive the reflection coefficient and transmission coefficient of pump light by using the dispersion relationships and electromagnetic boundary conditions.We construct the nonlinear coupled wave equations,derive and present the small signal approximation solution and the general large signal solution exactly.Under the transmission model and reflection model,we find that the conversion efficiency of the second-harmonic wave is obviously dependent on transmission coefficient and other general physical quantities such as the length of LN crystal and the amplitude of pump light.Our analytical theory and formulation can act as an accurate tool for the quantitative evaluation of the SHG energy conversion efficiency in an LN crystal under practical situations,and it can practically be used to treat other more complicated and general nonlinear optics problems.

Fast pre-stack multi-channel inversion constrained by seismic reflection features

Classical multi-channel technology can significantly reduce the pre-stack seismic inversion uncertainty, especially for complex geology such as high dipping structures. However, due to the consideration of complex structure or reflection features, the existing multi-channel inversion methods have to adopt the highly time-consuming strategy of arranging seismic data trace-by-trace, limiting its wide application in pre-stack inversion. A fast pre-stack multi-channel inversion constrained by seismic reflection features has been proposed to address this issue. The key to our method is to re-characterize the reflection features to directly constrain the pre-stack inversion through a Hadamard product operator without rearranging the seismic data. The seismic reflection features can reflect the distribution of the stratum reflection interface, and we obtained them from the post-stack profile by searching the shortest local Euclidean distance between adjacent seismic traces. Instead of directly constructing a large-size reflection features constraint operator advocated by the conventional methods, through decomposing the reflection features along the vertical and horizontal direction at a particular sampling point, we have constructed a computationally well-behaved constraint operator represented by the vertical and horizontal partial derivatives. Based on the Alternating Direction Method of Multipliers (ADMM) optimization, we have derived a fast algorithm for solving the objective function, including Hadamard product operators. Compared with the conventional reflection features constrained inversion, the proposed method is more efficient and accurate, proved on the Overthrust model and a field data set.

A broad learning-based comprehensive defence against SSDP reflection attacks in IoTs

The proliferation of Internet of Things(IoT)rapidly increases the possiblities of Simple Service Discovery Protocol(SSDP)reflection attacks.Most DDoS attack defence strategies deploy only to a certain type of devices in the attack chain,and need to detect attacks in advance,and the detection of DDoS attacks often uses heavy algorithms consuming lots of computing resources.This paper proposes a comprehensive DDoS attack defence approach which combines broad learning and a set of defence strategies against SSDP attacks,called Broad Learning based Comprehensive Defence(BLCD).The defence strategies work along the attack chain,starting from attack sources to victims.It defends against attacks without detecting attacks or identifying the roles of IoT devices in SSDP reflection attacks.BLCD also detects suspicious traffic at bots,service providers and victims by using broad learning,and the detection results are used as the basis for automatically deploying defence strategies which can significantly reduce DDoS packets.For evaluations,we thoroughly analyze attack traffic when deploying BLCD to different defence locations.Experiments show that BLCD can reduce the number of packets received at the victim to 39 without affecting the standard SSDP service,and detect malicious packets with an accuracy of 99.99%.

Electric-controlled metasurface antenna array with ultra-wideband frequency reconfigurable reflection suppression

The electric-controlled metasurface antenna array(ECMSAA)with ultra-wideband frequency reconfigurable reflection suppression is proposed and realized.Firstly,an electriccontrolled metasurface with ultra-wideband frequency reconfigurable in-phase reflection characteristics is designed.The element of the ECMSAA is constructed by loading the single electric-controlled metasurface unit on the conventional patch antenna element.The radiation properties of the conventional patch antenna and the reflection performance of electric-controlled metasurface are maintained when the antenna and the metasurface are integrated.Thus,the ECMSAA elements have excellent radiation properties and ultra-wideband frequency reconfigurable in-phase reflection characteristics simultaneously.To take a further step,a 6×10 ECMSAA is realized based on the designed metasurface antenna element.Simulated and measured results prove that the reflection of the ECMSAA is dynamically suppressed in the P and L bands.Meanwhile,high-gain and multi-polarization radiation properties of the ECMSAA are achieved.This design method not only realizes the frequency reconfigurable reflection suppression of the antenna array in the ultra-wide frequency band but also provides a way to develop an intelligent low-scattering antenna.

Photoinduced valley-dependent equal-spin Andreev reflection in Ising superconductor junction

The Ising spin–orbit coupling could give rise to the spin-triplet Cooper pairs and equal-spin Andreev reflection(AR)in Ising superconductors.Here we theoretically study the valley-dependent equal-spin AR in a ferromagnet/Ising superconductor junction with a circularly polarized light applied to the ferromagnet.Because of the spin-triplet Cooper pairs and the optical irradiation,eight kinds of AR processes appear in the junction,including equal-spin AR and normal AR,the strengths and properties of which strongly depend on the valley degree of freedom.The AR probabilities for the incident electron from the two valleys exhibit certain symmetry with respect to the magnetization angle and the effective energy of light.The equal-spin AR and normal AR present different features and resonant behaviors near the superconducting gap edges.Due to equal-spin-triplet Cooper pairs,not only charge supercurrent but also spin supercurrent can transport in the Ising superconductors.The differential spin conductance for electron injecting from the two valleys can be controlled by the circularly polarized light.

Antireflection Coating for Solar Cells Based on Graded-Index Materials

The conversion of sunlight into electricity via photovoltaics presents tremendous opportunities for the generation of renewable energy. However, solar cells still face several challenges and limitations to further reduce manufacturing costs and increase module efficiency. Photon management is paramount to increase the efficiency of the mainstream silicon-based cell and always includes a suitable antireflection coating (ARC) structure to decrease the reflectance (R) at the top surface. We propose a novel triple-layer anti-reflective coating (TLAR) consisting of three layers sandwiched between the upper cover (glass) and the substrate (silicon). The inner three layers are graded refractive index material (GIM) as an active layer, titanium dioxide (TiO2), and zinc sulfide (ZnS), respectively. The optical properties of the TLAR have been investigated using the transfer matrix method (TMM). The results of using GIM as the active medium lead to the reflection decaying to the minimum value, and the transmittance reaching the maximum values at a specific wavelength range. The proposed triple-layer anti-reflective coating (TLAR) structure presents a promising solution for enhancing the efficiency of solar cells. Its unique design and utilization of graded refractive index material (GIM) as the active layer make it a novel and innovative approach that holds great potential for advancing solar cell technology.

Reflections on,and Improvements of,the Mediation Functions of People's Assessors

Legislatively,the people’s assessors are defined as individuals who share judicial power.However,in the context of dispute resolutions,their role is restricted by the courts,which affects the extent of their assessorial activities.It is imperative to reconsider the implications of the people’s assessors’deep involvement in mediation from the standpoint of societal division of labor.To enhance this division of labor,it is advisable that the people’s assessors relinquish their mediation roles.It is necessary to redefine the distinctions between people’s assessors,judges,and people’s mediators,including specially invited mediators.This would not only make up the deficiencies in the role of professional judges but also relieve the tension between judicial professionalism and popular accountability.

Origin of a giant fuzzy reflection zone and its implication for natural gas exploration in the southwestern Qiongdongnan Basin of the South China Sea

The southwestern depression of the Qiongdongnan Basin(QDNB)hosts thick Cenozoic sediments and awaits major hydrocarbon discovery.Multichannel seismic(MCS)profile CFT2011 across the southwestern QDNB reveals a~60-km-wide fuzzy reflection zone(FRZ)within the sediments,but its origin and distribution remain unclear.Here ocean bottom seismometer(OBS)data of Line CFT2011 are processed with focus on the velocity structures by traveltime tomography inversion and analyzed together with the coincident and adjacent MCS profiles.The OBS velocity results show that the giant FRZ features lower velocity with difference up to 1.5 km/s and smaller vertical velocity gradient than the surrounding sedimentary sequences at the same depth,likely resulting from enhanced fluid infilling.The MCS profile exhibits that the giant FRZ is about 3-9-km thick and extends from the Paleogene strata rich in organic matters upward to the lower Pleistocene sediments.Within the shallow overlying sediments,multiple bright spots with reverse polarity are imaged and their reflection amplitudes increase with offset,consistent with the features of gas-charged sediments.They are probably shallow gas reservoirs with gases sourced from the deep FRZ.Therefore,the FRZ is proposed to be a giant gas-charged zone,which probably contains lots of hydrocarbon gases migrated vertically from the deep Paleogene source rocks through the boundary faults of the depressions and the minor fractures generated under overpressure.This FRZ is also imaged on the adjacent MCS profiles MCS-L1 and MCS-L2 with the width of about 40 km and 68 km,respectively.It is roughly estimated to cover an area of~1900 km2 and host a volume of~11400 km3 assuming an average thickness of 6 km,implying huge natural gas potential in the sedimentary depression of the southwestern QDNB of the South China Sea.