Functional evaluation of the filtering bleb by ultrasound biomicroscopy after trabeculectomy with mitomycin C

AIM： To study the role of ultrasound biomicroscopy（UBM） in the assessment of the bleb function after trabeculectomy with mitomycin C（MMC）. METHODS： This was a cross-sectional study including all cases had undergone trabeculectomy with MMC 0.2 mg/mL for 3 min. Participants were recruited from the follow-up cases at Department of Ophthalmology, Tanta University in the period from August 2015 to August 2016. Full history taking and ophthalmological examination were performed. Intraocular pressure（IOP） was measured using Goldmann applanation tonometry and the history of prescribed postoperative antiglaucoma medications was recorded. Accordingly, the trabeculectomy blebs were divided clinically into successful blebs when the IOP post-operative was ≤18 mmHg without medications. Scanning examination of the filtering bleb using UBM examination was performed at the period from 2 to 36 mo after trabeculectomy（13.6±9.7 m o）. RESULTS： This study included 33 trabeculectomy filtering blebs of 25 patients（9 males and 16 females）. The mean age of patients was 53.2±14.2 y（range 25-71y）. We had 20 eyes with complete success, 9 eyes with qualified success, and 4 eyes with failure after trabeculectomy with MMC. The blebs were classified into successful blebs（IOP ≤18 mmHg without antiglaucoma medications）, others were classified into qualified successful and failed blebs. There was a significant correlation between certain UBM findings（intra-bleb reflectivity, draining sub-scleral tract, bleb height, and intrableb fluid cysts） and cases with different grades of clinical functional success（P〈0.01）.CONCLUSION： UBM is an objective tool in the functional assessment of the post-trabeculectomy filtering bleb through a significant correlation between certain UBM parameters and the different grades of clinical functional success.

Evaluation of the cement bond quality through filtering the reflected ultrasonic waves

High cement bond quality is required to keep an oil well from hydraulic commu- nication between zones. In the cement bond evaluation, the ultrasonic echo method is widely used for its capability of channeling azimuth detection. Full waveforms reflected from the cased hole are simulated for different bonding conditions by the generalized transfer matrix method. Because of the high acoustic impedance of casing, the amplitudes of the reflected waves from the cement and the formation are small and cannot easily be used to evaluate the cementing condition. The wave that can propagate into the cement and the formation through the casing concentrates closely on the casing resonant frequency. To reduce the amplitude of the reflected wave from the casing inner surface and highlight the part of the reflected wave which carries the cementing quality information, the reflected full wave is filtered according to the casing resonant frequency. There are several wave packets in the filtered waveform. When the amplitude of the second wave packet is low, the cement bonds well with the casing, otherwise poorly. A low amplitude third wave packet is an indication of a good bond of the cement with the formation, otherwise poor. To reveal the sensitivity of the reflection wave amplitudes to the incident angle, reflected full waveform is modeled when an acoustic beam with finite width is incident on the casing. It is shown that the bond evaluation method based on filtered wave packets is valid for incident angle less than 5 degrees.

Study of a narrowband reflection filter with multi-channels

Reflection filters have various applications in optical communication and other systems.In this letter,we propose a narrowband high-reflection filter composed of dielectric and metallic layers,in which an optimized filter combined with an admittance-matching layer with broad stop band is achieved.The structure can be expressed as Sub ｜ （HL）13H2L（HL）313Cr0.84H ｜ air,with full-width at half-maximum （FWHM） bandwidth of 2.5 nm.Based on this structure,reflection filters with multi-peaks are presented,and the law of distribution of peak positions is drawn.

High Q reflection filter using a gradient-index membrane with a grating surface

High Q reflection filter using a gradient-index(GI) membrane with a grating surface is proposed. The thickness of GI membrane is very small comparing with the traditional multilayer reflection filter or the GI reflection filter, and the GI membrane can also break the restriction of the resonant excitation condition of the conventional guided-mode resonance(GMR) filter. High Q filtering features can be maintained even on the high-index substrate. The grating thickness of the GI membrane filter can be used to select the resonance wavelength with different quality factors(QFs), the reflection peak is blue-shifted, and the QF is decreased from 554.4 to 207.8 as the grating thickness is increased from 50 nm to 150 nm. The gradient coefficient of the GI membrane filter can be used to tailor the number of the reflection channels. The resonant excitations of high order waveguide modes confined in the GI membrane are responsible for the high Q filtering properties with multiple channels.

Optical filter based on internal reflection and optical rotatory dispersion of NaBrO_3 crystal

Based on the optical rotatory dispersion and zero reflection of the p-polarization light at the Brewster angle, a novel optical filter that employs only one NaBrO3 crystal and one polarizer are proposed and demonstrated. Performance of the optical filter is studied both theoretically and experimentally. Results show that the green light is becomes nearly extinct when the angles of the polarizer are set at 80°and 260°, whereas the red light becomes nearly extinct when the angles of the polarizer are set at 116°and 296°.Isolation of more than 8 dB can be achieved. The measured extinction ratios are 12.3 and 12.6 dB for green and red lights, respectively.