The Joule–Thomson effect of (CO_(2)+H_(2)) binary system relevant to gas switching reforming with carbon capture and storage(CCS)

The Joule-Thomson effect is one of the important thermodynamic properties in the system relevant to gas switching reforming with carbon capture and storage(CCS). In this work, a set of apparatus was set up to determine the Joule-Thomson effect of binary mixtures(CO_(2)+ H_(2)). The accuracy of the apparatus was verified by comparing with the experimental data of carbon dioxide. The Joule-Thomson coefficients(μ_(JT)) for(CO_(2)+ H_(2)) binary mixtures with mole fractions of carbon dioxide(x_(CO_(2))= 0.1, 0.26, 0.5,0.86, 0.94) along six isotherms at various pressures were measured. Five equations of state EOSs(PR,SRK, PR, BWR and GERG-2008 equation) were used to calculate the μ_(JT)for both pure systems and binary systems, among which the GERG-2008 predicted best with a wide range of pressure and temperature.Moreover, the Joule-Thomson inversion curves(JTIC) were calculated with five equations of state. A comparison was made between experimental data and predicted data for the inversion curve of CO_(2). The investigated EOSs show a similar prediction of the low-temperature branch of the JTIC for both pure and binary systems, except for the BWRS equation of state. Among all the equations, SRK has the most similar result to GERG-2008 for predicting JTIC.

Analysis of China＇s Oil and Gas Policies in 2016

Guided by President Xi Jinping's key speech about energy revolution— "Four Revolutions and One Cooperation"-the Chinese oil and gas industry continued to accelerate its pace of reform in 2016.China has deepened its supply-side structural reforms,prevented and resolved the problem of excess production capacity,increased the effective supply of clean energy such as natural gas,and formed an energy innovation system.It has pushed forward the reform of pricing mechanisms with significant adjustments in the pricing mechanisms of oil products,pipeline transportation,gas storage and gas used for fertilizer production.It has also accelerated market access reform and encouraged various investors to enter into the fields of exploration & production,pipeline transportation and crude oil imports.China has sped up the legislative process of environmental protection to promote green and low-carbon development.It has accelerated oil & gas industry institutional reform,with some provinces initiating the pilot reform of oil and gas.

Techno-economic assessment of a chemical looping splitting system for H2 and CO Co-generation

The natural gas(NG)reforming is currently one of the low-cost methods for hydrogen production.However,the mixture of H2 and CO_(2) in the produced gas inevitably includes CO_(2) and necessitates the costly CO_(2) separation.In this work,a novel double chemical looping involving both combustion(CLC)and sorption-enhanced reforming(SE-CLR)was proposed towards the co-production of H2 and CO(CLC-SECLRHC)in two separated streams.CLC provides reactant CO_(2) and energy to feed SECLRHC,which generates hydrogen in a higher purity,as well as the calcium cycle to generate CO in a higher purity.Techno-economic assessment of the proposed system was conducted to evaluate its efficiency and economic competitiveness.Studies revealed that the optimal molar ratios of oxygen carrier(OC)/NG and steam/NG for reforming were recommended to be 1.7 and 1.0,respectively.The heat integration within CLC and SECLRHC units can be achieved by circulating hot OCs.The desired temperatures of fuel reactor(FR)and reforming reactor(RR)should be 850
C and 600
C,respectively.The heat coupling between CLC and SECLRHC units can be realized via a jacket-type reactor,and the NG split ratio for reforming and combustion was 0.53:0.47.Under the optimal conditions,the H2 purity,the H2 yield and the CH4 conversion efficiency were 98.76%,2.31 mol mol-1 and 97.96%,respectively.The carbon and hydrogen utilization efficiency respectively were 58.60% and 72.45%in terms of the total hydrogen in both steam and NG.The exergy efficiency of the overall process reached 70.28%.In terms of the conventional plant capacity(75 × 103 t y^(-1))and current raw materials price(2500$t^(-1)),the payback period can be 6.2 years and the IRR would be 11.5,demonstrating an economically feasible and risk resistant capability.

Morphology effect of zirconia support on the catalytic performance of supported Ni catalysts for dry reforming of methane

An immature pinecone shaped hierarchically structured zirconia （ZrO2-ipch） and a cobblestone-like zirconia nanoparticulate （ZrO2-cs）, both with the monoclinic phase （m-phase）, were synthesized by the facile hydrothermal method and used as the support for a Ni catalyst for the dry reforming of methane （DRM） with CO2. ZrO2-ipch is a much better support than ZrO2-cs and the traditional ZrO2 irregular particles made by a simple precipitation method （ZrO2-ip）. The supported Ni catalyst on ZrO2-ipch （Ni/ZrO2-ipch） exhibited outstanding catalytic activity and coke-resistant stability compared to the ones on ZrO2-cs （Ni/ZrO2-cs） and ZrO2-ip （Ni/ZrO2-ip）. Ni/ZrO2-ip exhibited the worst catalytic performance. The origin of the significantly enhanced catalytic performance was revealed by characterization including XRD, N2 adsorption measurement （BET）, TEM, H2-TPR, CO chemisorption, CO2-TPD, XPS and TGA. The superior catalytic activity of Ni/ZrO2-ipch to Ni/ZrO2-cs or Ni/ZrO2-ip was ascribed to a higher Ni dispersion, increased reducibility, enhanced oxygen mo- bility, and more basic sites with a higher strength, which were due to the unique hierarchically structural morphology of the ZrO2-ipch support. Ni/ZrO2-ipch exhibited better stability for the DRM reaction than Ni/ZrO2-ip, which was ascribed to its higher resistance to Ni sintering due to a strengthened metal-support interaction and the confinement effect of the mesopores and coke deposition resistance. The higher coking resistance of Ni/ZrO2-ipch for the DRM reaction in comparison with Ni/ZrOz-ip orignated from the coke-removalabitity of the higher amount of lattice oxygen and more basic sites, confirmed by XPS and CO2-TPD analysis, and the stabilized Ni on the Ni/ZrO2-ipch catalyst by the confinement effect of the mesopores of the hierarchical ZrO2-ipch sup- port. The superior catalytic performance and coking resistance of the Ni/ZrO2-ipch catalyst makes it a promising candidate for synthesis gas production from the DRM reaction.

GTI’s hydrogen programs:hydrogen production,storage ,and applications

The use of hydrogen as an energy carrier could help address our concerns about energy security,global cli mate change,and air quality.Fuel cells are ani mportant enablingtechnologyfor the Hydrogen Future and have the potential torevolutionize theway we power our nation,offering cleaner,more-efficient alternatives to the combustion of gasoline and other fossil fuels.For over 45 years,GTI has been activein hydrogen energy research,development and demonstration.The Institute has ex-tensive experience and on-going workin all aspects of the hydrogen energy economyincluding production,delivery,infrastructure,use,safety and public policy.This paper discusses the recent GTI programsin hydrogen production,hydrogenstorage,and protonexchange membrane fuel cells(PEMFC) and solid oxide fuel cells(SOFC).

Investigation on the application of reformed coke oven gas in direct reduction iron production with a mathematical model

To investigate the application of reformed coke oven gas （COG） in producing the direct reduction iron （DRI）, we simulated a countercurrent gas solid moving bed reactor in which the iron ore pellet was reduced by reformed COG. An ordinary differential equation （ODE） was set based on the unreacted shrinking core model considering both mass and energy balances of the reactor. The concentration and temperature profiles of all species within the reactor were obtained by solving the ODE sys tem. The solid conversion and gas utilization were studied by changing gas flow rate, solid flow rate, reactor length, and the ratio of O/CHa to guide the practical application of COG in DRI production. Model results showed that COG was suitable for the DRI production. In order to meet the requirement of the industrial production, the minimum gas flow rate was set as 130,000 Nm3/h, and the maximum production was 90 t/h. The reactor length and the mole ratio x（O）： x（CH4） were depended on the actual industrial situations.