Sub-bandgap refractive indexes and optical properties of Sidopedβ-Ga_(2)O_(3) semiconductor thin films

In this article,we present a theoretical study on the sub-bandgap refractive indexes and optical properties of Sidopedβ-Ga_(2)O_(3) thin films based on newly developed models.The measured sub-bandgap refractive indexes ofβ-Ga_(2)O_(3) thin film are explained well with the new model,leading to the determination of an explicit analytical dispersion of refractive indexes for photon energy below an effective optical bandgap energy of 4.952 eV for theβ-Ga_(2)O_(3) thin film.Then,the oscillatory structures in long wavelength regions in experimental transmission spectra of Si-dopedβ-Ga_(2)O_(3) thin films with different Si doping concentrations are quantitively interpreted utilizing the determined sub-bandgap refractive index dispersion.Meanwhile,effective optical bandgap values of Si-dopedβ-Ga_(2)O_(3) thin films are further determined and are found to decrease with increasing the Si doping concentration as expectedly.In addition,the sub-bandgap absorption coefficients of Si-dopedβ-Ga_(2)O_(3) thin film are calculated under the frame of the Franz–Keldysh mechanism due to the electric field effect of ionized Si impurities.The theoretical absorption coefficients agree with the available experimental data.These key parameters obtained in the present study may enrich the present understanding of the sub-bandgap refractive indexes and optical properties of impurity-dopedβ-Ga_(2)O_(3) thin films.

A Transparent Photoresist Made of Titanium Dioxide Nanoparticle-Embedded Acrylic Resin with a Tunable Refractive Index for UV-Imprint Lithography

Transparent photoresists with a high refractive index(RI)and high transmittance in visible wavelengths have promising functionalities in optical fields.This work reports a kind of tunable optical material composed of titanium dioxide nanoparticles embedded in acrylic resin with a high RI for ultraviolet(UV)-imprint lithography.The hybrid film exhibits a tunable RI of up to 1.67(589 nm)after being cured by UV light,while maintaining both a high transparency of over 98%in the visible light range and a low haze of less than 0.05%.The precision machining of optical microstructures can be imprinted easily and efficiently using the hybrid resin,which acts as a light guide plate(LGP)to guide the light from the side to the top in order to conserve the energy of the display device.These preliminary studies based on both laboratory and commercial experiments pave the way for exploiting the unparalleled optical properties of nanocomposite resins and promoting their industrial application.

Surface phonon resonance:A new mechanism for enhancing photonic spin Hall effect and refractive index sensor

Metal-based surface plasmon resonance(SPR)plays an important role in enhancing the photonic spin Hall effect(SHE)and developing sensitive optical sensors.However,the very large negative permittivities of metals limit their applications beyond the near-infrared regime.In this work,we theoretically present a new mechanism to enhance the photonic SHE by taking advantage of SiC-supported surface phonon resonance(SPhR)in the mid-infrared regime.The transverse displacement of photonic SHE is very sensitive to the wavelength of incident light and the thickness of SiC layer.Under the optimal parameter setup,the calculated largest transverse displacement of SiC-based SPhR structure reaches up to 163.8 ym,which is much larger than the condition of SPR.Moreover,an NO_(2) gas sensor based on the SPhR-enhanced photonic SHE is theoretically proposed with the superior sensing performance.Both the intensity and angle sensitivity of this sensor can be effectively manipulated by varying the damping rate of SiC.The results may provide a promising paradigm to enhance the photonic SHE in the mid-infrared region and open up new opportunity of highly sensitive refractive index sensors.

Fabrication of UV-Curing Linalool-Polysiloxane Hybrid Films with High Refractive Index and Transparency

In this article,a series of high refractive indices(1.50-1.53)thiol phenyl polysiloxane(TPS)were synthesized via hydrolytic sol-gel reaction.The Fourier transform infrared spectra(FT-IR)and nuclear magnetic resonance spectra(NMR)results showed that TPS conformed to the predicted structures.Natural terpene linalool was exploited as photocrosslinker to fabricate UV-curing linalool-polysiloxane hybrid films(LPH)with TPS via photoinitiated thiol-ene reaction.LPH rapidly cured under UV irradiation at the intensity of 80 mW/cm^(2) in 30 s,exhibiting good UV-curing properties.The optical transmittance of LPH in the wavelength of 300-800 nm was over 90%,exhibiting good optical transparency.The water contact angle and water vapor permeability results showed that the introduction of phenyl groups enhance the hydrophobicity and water vapor barrier properties of LPH.The results indicated the potential of LPHs in the applications of optical functional coatings.

Predictive methods for density and refractive index of naphthenic lubricating oils during solvent extraction process

Lubricating oils are usually produced by solvent extraction to separate aromatics in order to achieve the desired specifications and better quality products.Among the different properties of lubricating oils,density and refractive index are some of the most important properties which can both be used for petroleum fluid characterization.Predictions of density and refractive index for naphthenic oils during solvent extraction by DMSO obtained by the pseudo-component approach and the quadratic correlation were both examined.The pseudo-component approach is a method to predict density and refractive index from composition while the latter merely relates density to refractive index.Results indicated that the predictions yielded by the pseudo-component method were in good agreement with experimental data for naphthenic oils.And the use of a function of refractive index(FRI_(20))as a pseudo-component property remarkably improved n_(20)predictions for the naphthenic mixtures.However,the density and refractive index predictions obtained by the quadratic correlation exhibited significantly higher de-viations for naphthenic oils than those for paraffinic oils.Thus a new modified correlation of the same functional form was proposed for naphthenic oils.The modification significantly improved predictions for naphthenic oils,which presented similar accuracy as the pseudo-component approach.And the previous correlation was still used for paraffinic oils.Additionally,effect of temperature on density and refractive index of naphthenic oils was examined.Results showed that the modified quadratic correlation was accurate for describing the relationship between density and refractive index of naphthenic oils at 20-90℃.The temperature dependence of density and refractive index for the raffinates and the extracts could be accurately described by the thermal coefficients for saturates and aromatics,respectively.Regarding the refractive index variation of the extracts with temperature,the empirical equation was proved to be a better option compared with the method using the thermal coefficient for aromatics.

Design of a coated thinly clad chalcogenide long-period fiber grating refractive index sensor based on dual-peak resonance near the phase matching turning point

A novel method for designing chalcogenide long-period fiber grating(LPFG) sensors based on the dual-peak resonance effect of the LPFG near the phase matching turning point(PMTP) is presented. Refractive index sensing in a high-refractive-index chalcogenide fiber is achieved with a coated thinly clad film. The dual-peak resonant characteristics near the PMTP and the refractive index sensing properties of the LPFG are analyzed first by the phase-matching condition of the LPFG. The effects of film parameters and cladding radius on the sensitivity of refractive index sensing are further discussed. The sensor is optimized by selecting the appropriate film parameters and cladding radius. Simulation results show that the ambient refractive index sensitivity of a dual-peak coated thinly clad chalcogenide LPFG at the PMTP can be 2400 nm/RIU, which is significantly higher than that of non-optimized gratings. It has great application potential in the field of chemical sensing and biosensors.

Measurement of Refractive Indices of (Al_xGa_(1-x))_(0.51)In_(0.49)P Grown by Low Pressure Organometallic Vapor Phase Epitaxy

The refractive indices of disordered (Al xGa 1-x ) 0 51 In 0 49 P,which is grown by low-pressure organometallic vapor phase epitaxy and lattice-matched to GaAs substrate,have been determined by measuring their reflectance spectra when the wavelength ranges between 0 5 to 2 5 micrometer.A single-oscillator dispersion model is used to verify the experiment data and calculate the reflectance spectrum.The refractive indices are used to analyze the waveguide of strain quantum well GaInP/AlGaInP visible laser diode.The simulated far field pattern is consistent with the experimental results very well.

Asymmetrical Fabry-Perot cavity slot micro-ring resonator and its sensing characteristics

To achieve high quality factor and high-sensitivity refractive index sensor,a slot micro-ring resonator(MRR)based on asymmetric Fabry-Perot(FP)cavity was proposed.The structure consisted of a pair of elliptical holes to form an FP cavity and a microring resonator.The two different optical modes generated by the micro-ring resonator were destructively interfered to form a Fano line shape,which improved the system sensitivity while obtaining a higher quality factor and extinction ratio.The transmission principle of the structure was analyzed by the transfer matrix method.The transmission spectrum and mode field distribution of the proposed structure were simulated by the finite difference time domain(FDTD)method,and the key structural parameters affecting the Fano line shape in the device were optimized.The simulation results show that the quality factor of the device reached 22037.1,and the extinction ratio was 23.9 dB.By analyzing the refractive index sensing characteristics,the sensitivity of the structure was 354 nm·RIU−1,and the detection limit of the sensitivity was 2×10−4 RIU.Thus,the proposed compact asymmetric FP cavity slot micro-ring resonator has obvious advantages in sensing applications owing to its excellent performance.

How to realize a negative refractive index material at the atomic level in an optical frequency range?

The theoretical mechanism for realizing a negative refractive index material in an optical frequency range with an atomic gas system of electromagnetically induced transparency (EIT) is studied. It is shown that under certain conditions such a dense gas can exhibit simultaneously negative permittivity and negative permeability, and negligibly small loss.

Highly sensitive fiber refractive index sensor based on side-core holey structure

We propose a side-core holey fiber （SCHF）-based surface plasmon resonance （SPR） sensor to achieve high refractive index （RI） sensitivity. The SCHF structure can facilitate analyte filling and enhance the overlapping area of the core mode and surface plasmon polariton （SPP） mode. The coupling properties of the sensor are analyzed by numerical simulation. The maximum sensitivity of 5000 nm/RIU in an RI range of 1.33-1.44, and the average sensitivity of 9295 nm/RIU in an RI range from 1.44 to 1.54 can be obtained.

Influence of Refractive Index Distribution on Brillouin Gain Spectrum in GeO_(2)-Doped Optical Fibers

GeO_(2) is commonly used as dopant to adjust the refractive index profile(RIP)and the acoustic velocity profile(AVP)in the fiber,thereby forming different Brillouin gain spectrum(BGS)characteristics such as Brillouin gain,acoustic mode number and peak intensity difference.When an optical fiber is used in optical fiber sensing or communication system,its BGS characteristics may play an important role in determining the performance of the system.In this paper,finite element analysis(FEA)method is used to study the influence of refractive index distribution and its corresponding AVP on the BGS in step-index,graded-index,and complex-index optical fibers.A new method has also been proposed to efficiently discriminate acoustic mode solution and obtain the new and full images of total Brillouin gain and acoustic modes number of the fiber as a function of the refractive index distribution,considering the influence of changing the refractive index difference and the geometric size simultaneously.For each type of optical fiber,the recommended parameter range is provided for optical fiber sensing and optical fiber communication.Moreover,the suitable optical fiber with close peak intensity in its multi-peak BGS is explored and achieved,which can be used in Brillouin beat spectrum detection systems to improve sensing accuracy.

Prediction of Density and Refractive Index of Lubricating Oils during Secondary Solvent Extraction Process by Furfural

To meet the requirements for high aromatic content and low polycyclic aromatic(PCA)concentration,eco-friendly aromatic-rich rubber extender oils are usually produced by two-stage solvent extraction processes with furfural.Among the different properties of rubber processing oils,density and refractive index are some of the most important properties related to their final quality.Two types of methods,including a pseudo-component approach by using mixing rules and several correlations,were used for calculation of density and refractive index at 20℃ of paraffinic furfural-extract oils and their secondary raffinates.Results indicated that similar accuracy was obtained for predicting the density and the refractive index of furfural+furfural-extract paraffinic oil systems.However,the quadratic correlation presents its advantage over the pseudo-component approach when the composition of oils is not available.Moreover,the quadratic correlation was also used for naphthenic lubricating oils during two-stage solvent extraction processes.The predictions showed much larger discrepancies with respect to experimental values than those of paraffinic lubricating oils,which indicated that the quadratic correlation was more suitable for paraffinic oils with a CN value of below 37%.

Refractive Index and Electronic Polarizability of Ternary Chalcopyrite Semiconductors

Simple models are proposed for the calculation of refractive index n and electronic polarizability α of AⅠBⅢC2Ⅵ and AⅡBⅣC2Ⅴ compounds of groups of chalcopyrite semiconductors from their energy gap data. The values family and 12 compounds of AⅡBⅣC2Ⅴ family are calculated for the work. The proposed models are applicable for the whole range of energy gap materials. The calculated values are compared with the available experimental and reported values. A fairly good agreement between them is obtained.

The Approach of Compensation of Air Refractive Index in Thermal Expansion Coefficients Measurement Based on Laser Feedback Interferometry

We present the thermal expansion coefficient （TEC） measurement technology of compensating for the effect of variations in the refractive index based on a Nd： YA G laser feedback system, the beam frequency is shifted by a pair of aeousto-optic modulators and then the heterodyne phase measurement technique is used. The sample measured is placed in a muffle furnace with two coaxial holes opened on the opposite furnace walls. The measurement beams hit perpendicularly and coaxially on each surface of the sample. The reference beams hit on the reference mirror and the high-refiectivity mirror, respectively. By the heterodyne configuration and computing, the influences of the vibration, distortion of the sample supporter and the effect of variations in the refractive index are measured and largely minimized. For validation, the TECs of aluminum samples are determined in the temperature range of 29-748K, confirming not only the precision within 5 × 10-7 K-1 and the accuracy within 0.4% from 298K to 448K but also the high sensitivity non-contact measurement of the lower reflectivity surface induced by the sample oxidization from 448 K to 748 K.

Cascaded tilted fiber Bragg grating for enhanced refractive index sensing

We proposed and experimentally demonstrated a cascaded tilted fiber Bragg grating(TFBG)for enhanced refractive index sensing.The TFBG is UV-inscribed in series in ordinary single-mode fiber(SMF)and reduced-diameter SMF with the same tilt angle,and then excites two sets of superposed spectral combs of cladding modes.The cascaded TFBG with total length of 18 mm has a much wider wavelength range over 100 nm and narrower wavelength separation than that of a TFBG only in the SMF,enabling an enlarged range and a higher accuracy of refractive index measurement.The fabricated TFBG with the merits of enhanced sensing capability and temperature self-calibration presents great potentials in the biochemical sensing applications.

High Refractive Index Ti3O5 Films for Dielectric Metasurfaces

Ti33O55 films are deposited with the help of an electron beam evaporator for their applications in metasurfaces. The film of subwavelength （632nm） thickness is deposited on a silicon substrate and annealed at 400℃. The ellipsometry result shows a high refractive index above 2.5 with the minimum absorption coefficient in the visible region, which is necessary for high efficiency of transparent metasurfaces. Atomic force microscopy analysis is employed to measure the roughness of the as-deposited films. It is seen from micrographs that the deposited films are very smooth with the minimum roughness to prevent scattering and absorption losses for metasurface devices. The absence of grains and cracks can be seen by scanning electron microscope analysis, which is favorable for electron beam lithography. Fourier transform infrared spectroscopy reveals the transmission and reflection obtained from the film deposited on glass substrates. The as-deposited film shows high transmission above 60%, which is in good agreement with metasurfaces.

Variable refractive index in environment matte

Environment matting and compositing is a technique to extract a foreground object, including color, opacity, reflec- tive and refractive properties, from a real-world scene, and synthesize new images by placing it into new environments. The description of the captured object is named environment matte. Recent matting and compositing techniques can produce quite realistic images for objects with complex optical properties. This paper presents an approximate method to transform the matte by simulating variation of the foreground object’s refractive index. Our algorithms can deal with achromatous-and-transparent ob- jects and the experimental results are visually acceptable. Our idea and method can be applied to produce some special video effects, which could be very useful in film making, compared with the extreme difficulty of physically changing an object’s refractive index.

Refractive index characteristics of edible oils based on spectrometry and effects of oil dispersion on OCT

It is necessary to investigate the wavelength-dependent variation rules of the refractive index of edible oils so as to explore the specificity of the dispersion in light propagation,imaging,and interference processes among different types of edible oil products.In this study,by deriving the refractive index equations of the double glass sheet holding device and oil,the reflectance spectra of three different types of oil samples,namely,peanut oil,colza oil,and kitchen waste oil,were measured via a spectrometer.Furthermore,the refractive index model of these different types of oil samples was investigated.Additionally,based on the oil dispersion characteristics,the dis-persion of oil in optical coherence tomography(OCT)was compensated via deconvolution.In the wavelength range of λ∈(380,1500)nm,the analytical expressions of the double glass sheet holding device and oils are featured by practical reliability.The refractive indexes of three different types of oils n∈(1.38,1.52)show normal dispersion characteristics.The Cauchy co-efficient matrix of the oil refractive index can be used for oil identification;in particular,the healthy oil and waste oil differ significantly in terms of the Cauchy coefficient matrix in the infrared band.Oil dispersion has almost no influence on the phase spectra of oils but can enhance their amplitude spectra.The dispersion mismatch can be eliminated by calculating the convo-lution kernel.The envelope broadening factors of OCT interference signals of oil products are 0.84,0.64,and 0.91,respectively.According to the present research results,the refractive index model of oil can effectively remove the influence of the holding device.The refractive indexes of three different types of oil samples show similar wavelength-dependent variation characteristics,which confirms the existence of many correlated components in these oil samples.The established refractive index model of oil in a wide spectral range,from the ultraviolet to the infrared band,can be adequately employed for identifying different types of oils.The numerical dispersion compensation based on the established refractive index model can enhance the axial resolution in OCT imaging.

A new class of negative refractive index transmission line

We propose a new class of negative refractive index transmission line in which ideal operational amplifiers are applied to form the periodically loaded negative-impedance-converted inductors and capacitors. The phase response of the new trans-mission line is opposite to that of a positive refractive index conventional transmission line. Unlike the existing negative refractive index transmission line,the new negative refractive index transmission line is non-dispersive and thus can lead to many novel applications such as designing new broadband devices.

Band rules for the frequency spectra of three kinds of aperiodic photonic crystals with negative refractive index materials

By means of the theory of electromagnetic wave propagation and transfer matrix method, this paper investigates the band rules for the frequency spectra of three kinds of one-dimensional （1D） aperiodic photonic crystals （PCs）, generalized Fibonacci GF（p, 1）, GF（1,2）, and Thue Morse （TM） PCs, with negative refractive index （NRI） materials. It is found that all of these PCs can open a broad zero-n gap, TM PC possesses the largest zero-n gap, and with the increase of p, the width of the zero-n gap for GF（p, 1） PC becomes smaller. This characteristic is caused by the symmetry of the system and the open position of the zero-n gap. It is found that for GF（p, 1） PCs, the possible limit zero-n gaps open at lower frequencies with the increase of p, but for GF（1,2） and TM PCs, their limit zero-n gaps open at the same frequency. Additionally, for the tbree bottom-bands, we find the interesting perfect self-similarities of the evolution structures with the increase of generation, and obtain the corresponding subband-number formulae. Based on 11 types of evolving manners Qi （i = 1, 2,... , 11） one can plot out the detailed evolution structures of the three kinds of aperiodic PCs for any generation.