High Alumina Refractory Bricks for Electric Arc Furnace Roofs

This standard specifies the sort, technical requirement, test method, inspection rules, marking, packing, transportation, storage and quality certification of high alumina refractory bricks for electric arc furnace roofs.

Silica Refractory Bricks

1 Scope This standard specifies the classification, technical requirements, test methods, quality appraisal procedures, packing, marking, transportation, storage, and quality certificate of silica refractory bricks.

Fireclay Refractory Bricks for Hot Blast Stove

This standard specifies the classification, shape, dimension, technical requirements, test method, inspection rules, packing, marking, transportation, storage and quality certification of fireclay refractory bricks for hot blast stove.

Kaolinite Refractory Bricks for Blast Furnaces

This standard is suitable to the fireclay bricks for blast furnace.

Fireclay Refractory Bricks for Glass Melting Furnace

This standard is applicable to fireclay refractory bricks with unit weight ≥ 50 kg for glass melting furnaces.

Fireclay Refractory Bricks

This standard specifies the classification, brand, shape, dimension, technical requirements, test methods, quality appraisal procedures, packing, marking, transportation, storage, and quality certificate of fireclay refractory bricks.

Silica Refractory Bricks for Glass Melting Furnace

1 Scope This standard specifies the classification, technical requirements, test method, inspection rules, marking, packing, transportation, storage and quality certification of silica refractory bricks for glass melting furRaces.

Bauxite Based Refractory Bricks for Blast Furnaces

This standard is applicable to the bauxite based refractory bricks under the bosh for blast furnaces.

Bauxite Based Refractory Bricks for Hot Blast Stove

This standard specifies the technical require-ments, test method, inspection rules, packing, marking, transportation, storage and quality certificate of bauxite based refractory bricks for hot blast stove.

Development of Thermal Shock Resistant and Low Creep Bricks for Hot Blast Stove

The paper describes the ries with high thermal shock development of brick seresistance and low creep rate for hot blast stove, including research target and research plan on the basis of analysis on how to enhance the thermal shock resistance and to lower creep rate of the bricks. Efforts have been made on the selection of starting materials such as corundum, mullite, andalusite and sillimanite etc., together with some measures taken on multi-grade formulation, homogenizing of the matrix of bricks and addition of some special additives. The results indicated that the bricks were with characteristics such as higher thermal shock resistance of 〉 30 cycles under quenching in water from 1000℃, and creep rate of 0. 2 under 1400℃ for 20 -50hrs with load of 0.2 MPa. Now a series of products of this kind have been developed and produced. The application of the products in Wuhan Iron and Steel Co. showed very prospective results. Now most of domestic large sized blast furnaces say ≥- 1000m^3, including those of Baoshan Iron and Steel Co. , have selected the series products made by Gongyi No. 5 Refractories Head Factory（GYWN） for their hot blast stoves.

Composite Design of Low Thermal Conductivity Mullite Brick for Application to Cement Kiln

In order to restrain cement kiln shell＇ s thermal loss and potential safety hazards,composite design was employed of working layer,thermal preservation layer and thermal insulation layer.Thermal preservation layer＇ s boundary and strain were analyzed and the overall thermal conductivity was calculated.The result shows that the sinusoidal curve boundary combination is adopted between the working layer and thermal preservation layer,and the slope-shape with angle of 135 degrees between the thermal preservation layer and thermal insulation layer could relieve the strain concentration.Comprehensive thermal conductivity of the composite mullite brick decreases from the working layer 2.74 W·m^（-1）·K^（-1） to1.54 W·m^（-1）·K^（-1）.When applying the composite bricks in cement kilns,the kiln shell temperature is from50 ℃ to 70 ℃ lower than using normal bricks.