Waste carbon residue(WCR)was efficiently detoxicated and regenerated to high-purity graphite(PGC)used in lithium-ion batteries through the constant-pressure acid leaching technique.The leaching conditions were optimiz...Waste carbon residue(WCR)was efficiently detoxicated and regenerated to high-purity graphite(PGC)used in lithium-ion batteries through the constant-pressure acid leaching technique.The leaching conditions were optimized by the combination of orthogonal and single-factor experiments.Results show that PGC with 99.5%purity is regenerated at temperature of 60℃,initial acid concentration of 12%,leaching time of 180 min,and liquid-to-solid ratio of 25:1,satisfying the requirements of commercial graphite.Meanwhile,the sodium hydroxide precipitation process was designed to recover valuable components from leachate efficiently.Ni,Co,Mn,and Al recoveries reach 96.92%,87.5%,97.83%,and 92.17%,respectively,at pH=11.Moreover,the co-product NaF can be recovered with purity over 99%via evaporative crystallization.The loss rate of fluorine is less than 0.5%,thereby eliminating the pollution risk of fluorine to the environment.The proposed process shows considerable environmental and economic benefits.展开更多
In this study,the deactivation mechanism caused by high accessibility of strong acid sites for the waste FCC catalyst was proposed and verified for the first time.Based on the proposed deactivation mechanism,magnesium...In this study,the deactivation mechanism caused by high accessibility of strong acid sites for the waste FCC catalyst was proposed and verified for the first time.Based on the proposed deactivation mechanism,magnesium modification through magnesium chloride impregnation was employed for the regeneration of waste FCC catalyst.The regenerated waste FCC catalyst was characterized,with its heavy oil catalytic cracking performance tested.The characterization results indicated that,in comparison with the unmodified waste FCC catalyst,the acid sites strength of the regenerated waste FCC catalyst was weakened,with no prominent alterations of the total acid sites quantity and textural properties.The heavy oil catalytic cracking results suggested that the catalytic cracking performance of the regenerated waste FCC catalyst was greatly improved due to the suitable surface acidity of the sample.In contrast with the unmodified waste FCC catalyst,the gasoline yield over the regenerated waste FCC catalyst significantly increased by 3.04 percentage points,meanwhile the yield of dry gas,LPG,coke and bottoms obviously decreased by 0.36,0.81,1.28 and 0.87 percentage points,respectively,making the regenerated waste FCC catalyst serve as a partial substitute for the fresh FCC catalyst.Finally,the acid property change mechanism was discussed.展开更多
As a promising in situ remediation technology, nanoscale zero-valent iron （nZVI） can remove polybromi- nated diphenyl ethers such as decabromodiphenyl ether （BDE209） effectively, However its use is limited by its ...As a promising in situ remediation technology, nanoscale zero-valent iron （nZVI） can remove polybromi- nated diphenyl ethers such as decabromodiphenyl ether （BDE209） effectively, However its use is limited by its high production cost. Using steel pickling waste liquor as a raw material to prepare nanoscale zero-valent metal （nZVM） can overcome this deficiency. It has been shown that humic acid and metal ions have the greatest influence on remediation. The results showed that nZVM and nZVI both can effectively remove BDE209 with little difference in their removal efficiencies, and humic acid inhibited the removal efficiency, whereas metal ions promoted it. The promoting effects followed the order Ni2＋ 〉 Cu2＋ 〉 Co2＋ and the cumulative effect of the two factors was a combination of the promoting and inhibitory individual effects. The major difference between nZVM and nZVI lies in their crystal form, as nZVI was found to be amorphous while that of nZVM was crystal. However, it was found that both nZVM and nZVI removed BDE209 with similar removal efficiencies. The effects and cumu- lative effects of humic acid and metal ions on nZVM and nZVI were very similar in terms of the efficiency of the BDE209 removal.展开更多
基金the financial supports from the National Natural Science Foundation of China(Nos.52174338,51904349)the Natural Science Foundation of Hunan Province,China(No.2021JJ30796)。
文摘Waste carbon residue(WCR)was efficiently detoxicated and regenerated to high-purity graphite(PGC)used in lithium-ion batteries through the constant-pressure acid leaching technique.The leaching conditions were optimized by the combination of orthogonal and single-factor experiments.Results show that PGC with 99.5%purity is regenerated at temperature of 60℃,initial acid concentration of 12%,leaching time of 180 min,and liquid-to-solid ratio of 25:1,satisfying the requirements of commercial graphite.Meanwhile,the sodium hydroxide precipitation process was designed to recover valuable components from leachate efficiently.Ni,Co,Mn,and Al recoveries reach 96.92%,87.5%,97.83%,and 92.17%,respectively,at pH=11.Moreover,the co-product NaF can be recovered with purity over 99%via evaporative crystallization.The loss rate of fluorine is less than 0.5%,thereby eliminating the pollution risk of fluorine to the environment.The proposed process shows considerable environmental and economic benefits.
基金supported by the Exploratory Research Program of Petrochemical Research Institute (16-yk-01-03),PetroChina
文摘In this study,the deactivation mechanism caused by high accessibility of strong acid sites for the waste FCC catalyst was proposed and verified for the first time.Based on the proposed deactivation mechanism,magnesium modification through magnesium chloride impregnation was employed for the regeneration of waste FCC catalyst.The regenerated waste FCC catalyst was characterized,with its heavy oil catalytic cracking performance tested.The characterization results indicated that,in comparison with the unmodified waste FCC catalyst,the acid sites strength of the regenerated waste FCC catalyst was weakened,with no prominent alterations of the total acid sites quantity and textural properties.The heavy oil catalytic cracking results suggested that the catalytic cracking performance of the regenerated waste FCC catalyst was greatly improved due to the suitable surface acidity of the sample.In contrast with the unmodified waste FCC catalyst,the gasoline yield over the regenerated waste FCC catalyst significantly increased by 3.04 percentage points,meanwhile the yield of dry gas,LPG,coke and bottoms obviously decreased by 0.36,0.81,1.28 and 0.87 percentage points,respectively,making the regenerated waste FCC catalyst serve as a partial substitute for the fresh FCC catalyst.Finally,the acid property change mechanism was discussed.
基金This research was supported by National Natural Science Foundation of China （Grant No. 41471259） and Guangdong Technology Research Centre for Ecological Management and Remediation of Urban Water Systems （No. 2012 gczxA005）. The authors are grateful to all study participants and thanks for the financial support of the Guangdong Technology Research Centre for Ecological Management and Remediation of Water Systems.
文摘As a promising in situ remediation technology, nanoscale zero-valent iron （nZVI） can remove polybromi- nated diphenyl ethers such as decabromodiphenyl ether （BDE209） effectively, However its use is limited by its high production cost. Using steel pickling waste liquor as a raw material to prepare nanoscale zero-valent metal （nZVM） can overcome this deficiency. It has been shown that humic acid and metal ions have the greatest influence on remediation. The results showed that nZVM and nZVI both can effectively remove BDE209 with little difference in their removal efficiencies, and humic acid inhibited the removal efficiency, whereas metal ions promoted it. The promoting effects followed the order Ni2＋ 〉 Cu2＋ 〉 Co2＋ and the cumulative effect of the two factors was a combination of the promoting and inhibitory individual effects. The major difference between nZVM and nZVI lies in their crystal form, as nZVI was found to be amorphous while that of nZVM was crystal. However, it was found that both nZVM and nZVI removed BDE209 with similar removal efficiencies. The effects and cumu- lative effects of humic acid and metal ions on nZVM and nZVI were very similar in terms of the efficiency of the BDE209 removal.
