The Regional Surface Heating Field over the Heterogeneous Landscape of the Tibetan Plateau Using MODIS and In Situ Data

In this study, a parameterization scheme based on Moderate Resolution Imaging Spectroradiometer （MODIS） data and in-situ data was tested for deriving the regional surface heating field over a heterogeneous landscape. As a case study, the methodology was applied to the whole Tibetan Plateau （TP） area. Four images of MODIS data （i.e., 30 January 2007, 15 April 2007, 1 August 2007, and 25 October 2007） were used in this study for comparison among winter, spring, summer, and autumn. The results were validated using the observations measured at the stations of the Tibetan Observation and Research Platform （TORP）. The results show the following： （1） The derived surface heating field for the TP area was in good accord with the land-surface status, showing a wide range of values due to the strong contrast of surface features in the area. （2） The derived surface heating field for the TP was very close to the field measurements （observations）. The APD （absolute percent difference） between the derived results and the field observations was 〈10%. （3） The mean surface heating field over the TP increased from January to April to August, and decreased in October. Therefore, the reasonable regional distribution of the surface heating field over a heterogeneous landscape can be obtained using this methodology. The limitations and further improvement of this method are also discussed.

Surface Regional Heat(Cool) Island Effect and Its Diurnal Differences in Arid and Semiarid Resource-based Urban Agglomerations

With the rapid development of urban agglomerations in northwest arid and semiarid regions of China, the scope of the urban heat island(UHI) effect has gradually expanded and gradually connected, and has formed a regional heat island(RHI) with a larger range of impact to the regional environment. However, there are few studies on the heat island effect of urban agglomerations in arid and semiarid regions, so this paper selects the urban agglomeration of Hohhot, Baotou and Ordos(HBO) of Inner Mongolia, China as the study area. Based on the 8-day composite Moderate-resolution Imaging Spectroradiometer(MODIS) surface temperature data(156scenes in all) and land use maps for 2005, 2010, and 2015, we analyze the spatiotemporal distributions of regional heat(cool) islands(RH(C)I) and the responses of surface temperatures to land-use changes in the diurnal and interannual surface cities. The results showed that: 1) from 2005 to 2015, urban areas showed the cold island effect during the day, with the area of the cold island showing a shrinking feature;at night, they showed the heat island effect, with the area of the heat island showing a first decrease and then an increase.2) From 2005 to 2015, the land development(unutilized land to building land) brings the greatest temperature increase(ΔT = 1.36°C)during the day, while the greatest temperature change at night corresponds to the conversion of cultivated land to building land(ΔT =0.78°C) exhibited the largest changes at night. From 2010 to 2015, the land development(grassland to building land) bring the greatest temperature increase(ΔT = 0.85°C) during the day, while the great temperature change at night corresponds to the conversion of water areas to building land(ΔT = 1.38°C) exhibited the largest changes at night. Exploring the spatial and temporal evolution of surface urban heat(cool) islands in urban agglomerations in arid and semiarid regions will help to understand the urbanization characteristics of urban agglomerations and provide a reference for the formulation of policies for the coordinated and healthy development of the region and co-governance of regional environmental problems.

Effect of Counter-Gradient in the Computation of Turbulent Fluxes of Heat and Moisture in a Regional Model

The counter-gradient terms in the computations of turbulent fluxes of heat and moisture have been included in the PBL parameterization of a regional model for monsoon prediction. Results show that inclusion of counter-gradient terms has a marginal impact in the prediction of large scale monsoon circulation and rainfall rates.

Study on heat efficiency of laser-TIG double-side welding

A series of laser-TIG double-side welding experiments for aluminum alloys were carried out to investigate the heat efficiency of the process. The melting efficiency was introduced to evaluate quantitatively the degree of the mutual effect of the laser and the arc. The results showed that the melting efficiency of laser-TIG double-side welding exceeded the sum of the laser and the arc taken separately. With the increase of heat input, the weld depth and melting efficiency of the laser and the arc were increased signifwantly. This, in fact, implies the strong mutual effect of the laser and the arc as heat sources joined simultaneously in the process. Comparatively, the higher efficiency of the laser constituent of heat sources plays the main role in the increase of the process efficiency. The phenomena of arc column convergence, increased laser absorptivity and the formation of heat accumulation region are the causes of the improvement of heat efficiency.

Interpreting the sea surface temperature warming trend in the Yellow Sea and East China Sea

Previous studies have demonstrated that the low-frequency sea surface temperature(SST) variability in the Yellow Sea and East China Sea(YECS) is linked to large-scale climate variability, but explanations on the mechanisms vary. This study examines the low-frequency variability and trends of some atmospheric and oceanic variables to discuss their different effects on the YECS warming. The increasing temperature trend is also observed at a hydrographic section transecting the Kuroshio.The increasing rate of ocean temperature decreases with depth, which might result in an increase in vertical stratification and a decrease in vertical mixing, and thus plays a positive role on the YECS warming. The surface net heat flux(downward positive)displays a decreasing trend, which is possibly a result of the YECS warming, and, in turn, inhibits it. Wind speeds show different trends in different datasets, such that its role in the YECS warming is uncertain. The trends in wind stress divergence and curl have large uncertainties, so their effects on SST warming are still unclear. The Kuroshio heat transport calculated in this study,displays no significantly increasing trend, so is an unlikely explanation for the SST warming. Limited by sparse ocean observations,sophisticated assimilative climate models are still needed to unravel the mechanisms behind the YECS warming.

Effect of heat input on microstructure and mechanical properties of dissimilar joints of AISI 316L steel and API X70 high-strength low-alloy steel

The microstructure and mechanical properties of dissimilar joints of AISI 316L austenitic stainless steel and API X70 high-strength low-alloy steel were investigated.For this purpose,gas tungsten arc welding（GTAW）was used in three different heat inputs,including 0.73,0.84,and 0.97 kJ/mm.The microstructural investigations of different zones including base metals,weld metal,heat-affected zones and interfaces were performed by optical microscopy and scanning electron microscopy.The mechanical properties were measured by microhardness,tensile and impact tests.It was found that with increasing heat input,the dendrite size and inter-dendritic spacing in the weld metal increased.Also,the amount of delta ferrite in the weld metal was reduced.Therefore,tensile strength and hardness were reduced and impact test energy was increased.The investigation of the interface between AISI 316L base metal and ER316L filler metal showed that increasing the heat input increases the size of austenite grains in the fusion boundary.A transition region was formed at the interface between API X70 steel and filler metals.

Propagation and Mechanisms of the Quasi-Biweekly Oscillation over the Asian Summer Monsoon Region

The propagation and underlying mechanisms of the boreal summer quasi-biweekly oscillation（QBWO）over the entire Asian monsoon region are investigated,based on ECMWF Interim reanalysis（ERA-Interim）data,GPCP precipitation data,and an atmospheric general circulation model（AGCM）.Statistical analyses indicate that the QBWO over the Asian monsoon region derives its main origin from the equatorial western Pacific and moves northwestward to the Bay of Bengal and northern India,and then northward to the Tibetan Plateau（TP）area,with a baroclinic vertical structure.Northward propagation of the QBWO is promoted by three main mechanisms：barotropic vorticity,boundary moisture advection,and surface sensible heating（SSH）.It is dominated by the barotropic vorticity effect when the QBWO signals are situated to the south of 20°N.During the propagation taking place farther north toward the TP,the boundary moisture advection and SSH are the leading mechanisms.We use an AGCM to verify the importance of SSH on the northward propagation of the QBWO.Numerical simulations confirm the diagnostic conclusion that the equatorial western Pacific is the source of the QBWO.Importantly,the model can accurately simulate the propagation pathway of the QBWO signals over the Asian monsoon region.Simultaneously,sensitivity experiments demonstrate that the SSH over northern India and the southern slope of the TP greatly contributes to the northward propagation of the QBWO as far as the TP area.