A Regional Air-Sea Coupled Model and Its Application over East Asia in the Summer of 2000

A regional air-sea coupled model, comprising the Regional Integrated Environment Model System （RIEMS） and the Princeton Ocean Model （POM） was developed to simulate summer climate features over East Asia in 2000. The sensitivity of the model＇s behavior to the coupling time interval （CTI）, the causes of the sea surface temperature （SST） biases, and the role of air-sea interaction in the simulation of precipitation over China are investigated. Results show that the coupled model can basically produce the spatial pattern of SST, precipitation, and surface air temperature （SAT） with five different CTIs respectively. Also, using a CTI of 3, 6 or 12 hours tended to produce more successful simulations than if using 1 and 24 hours. Further analysis indicates that both a higher and lower coupling frequency result in larger model biases in air-sea heat flux exchanges, which might be responsible for the sensitivity of the coupled model＇s behavior to the CTI. Sensitivity experiments indicate that SST biases between the coupled and uncoupled POM occurring over the China coastal waters were due to the mismatch of the surface heat fluxes produced by the RIEMS with those required by the POM. In the coupled run, the air-sea feedbacks reduced the biases in surface heat fluxes, compared with the uncoupled RIEMS, consequently resulted in changes in thermal contrast over land and sea and led to a precipitation increase over South China and a decrease over North China. These results agree well observations in the summer of 2000.

Seasonal and Intraseasonal Variations of East Asian Summer Monsoon Precipitation Simulated by a Regional Air-Sea Coupled Model

The performance of a regional air-sea coupled model, comprising the Regional Integrated Environment Model System （RIEMS） and the Princeton Ocean Model （POM）, in simulating the seasonal and intraseasonal variations of East Asian summer monsoon （EASM） rainfall was investigated. Through comparisons of the model results among the coupled model, the uncoupled RIEMS, and observations, the impact of air-sea coupling on simulating the EASM was also evaluated. Results showed that the regional air sea coupled climate model performed better in simulating the spatial pattern of the precipitation climatology and produced more realistic variations of the EASM rainfall in terms of its amplitude and principal EOF modes. The coupled model also showed greater skill than the uncoupled RIEMS in reproducing the principal features of climatological intraseasonal oscillation （CISO） of EASM rainfall, including its dominant period, intensity, and northward propagation. Further analysis indicated that the improvements in the simulation of the EASM rainfall climatology and its seasonal variation in the coupled model were due to better simulation of the western North Pacific Subtropical High, while the improvements of CISO simulation were owing to the realistic phase relationship between the intraseasonal convection and the underlying SST resulting from the air-sea coupling.

Introduction to the Regional Coupled Model WRF4-LICOM: Performance and Model Intercomparison over the Western North Pacific

Regional coupled modeling is one of the frontiers of regional climate modeling,but intercomparison has not been well coordinated.In this study,a community regional climate model,WRF4,with a resolution of 15 km,was coupled with a high-resolution(0.1°)North Pacific Ocean model(LICOM_np).The performance of the regional coupled model,WRF4_LICOM,was compared to that of another regional coupled model,RegCM4_LICOM,which was a coupling of version 4 of the Regional Climate Model(RegCM4)with LICOM_np.The analysis focused on the 2005 western North Pacific summer monsoon rainfall.The results showed that the regional coupled models with either RegCM4 or WRF4 as their atmospheric model component simulated the broad features over the WNP reasonably well.Quantitative intercomparison of the regional coupled simulations exhibited different biases for different climate variables.RegCM4_LICOM exhibited smaller biases in its simulation of the averaged June–July–August SST and rainfall,while WRF4_LICOM better captured the tropical cyclone(TC)intensity,the percentage contributions of rainfall induced by TCs to the total rainfall,and the diurnal cycle of rainfall and stratiform percentages,especially over land areas.The different behaviors in rainfall simulated by the two models were partly ascribed to the behaviors in the simulated western North Pacific subtropical high(WNPSH).The stronger(weaker)WNPSH in WRF4_LICOM(RegCM4_LICOM)was driven by overestimated(underestimated)diabatic heating,which peaked at approximately 450 hPa over the region around the Philippines in association with different condensation–radiation processes.Coupling of WRF4 with LIOCM is a crucial step towards the development of the next generation of regional earth system models at the Chinese Academy of Sciences.

Coupling of a Regional Climate Model with a Crop Development Model and Evaluation of the Coupled Model across China

In this study, the CERES(Crop Estimation through Resource and Environment Synthesis) crop model was coupled with CLM3.5, the land module of the regional climate model RegCM4. The new coupled model was named RegCM4_CERES; and in this model, crop type was further divided into winter wheat, spring wheat, spring maize, summer maize, early rice, late rice,single rice, and other crop types based on each distribution fraction. The development of each crop sub-type was simulated by the corresponding crop model separately, with each planting and harvesting date. A simulation test using RegCM4_CERES was conducted across China from 1999 to 2008; a control test was also performed using the original RegCM4. Data on crop LAI(leaf area index), soil moisture at 10 cm depth, precipitation, and 2 m air temperature were collected to evaluate the performance of RegCM4_CERES. The evaluation provided comparison of single-station time series, regional distributions,seasonal variations, and statistical indices for RegCM4_CERES. The results revealed that the coupled model had an excellent ability to simulate the phonological changes and spatial variations in crops. The consideration of dynamic crop development in RegCM4_CERES corrected the wet bias of the original RegCM4 over North China and the cold bias over South China.However, the degree of improvement was minimal and the statistical indices for RegCM4_CERES were roughly the same as the original RegCM4.

SIMULATION OF SUMMER CLIMATE IN CHINA DURING 1997 AND 1998 USING A REGIONAL AIR-SEA COUPLED MODEL

Using the regional air-sea coupled climate model RegCM3-POM,a series of numerical experiments are performed to simulate the summer climate in 1997 and 1998 with different coupling time steps.The results show that the coupled model has good performance on the simulation of the summer sea surface temperature(SST) in 1997 and 1998,and the simulation results of CPL1(with the coupling time step at 1 hour) are similar to those of CPL6(with the coupling time step at 6 hours).The coupled model can well simulate SST differences between 1997 and 1998.As for the simulation of the drought in 1997 and the flood in 1998,the results of CPL6 are more accurate.The coupled model can well simulate the drought in 1997 over North China,and compared with the results of the atmosphere model RegCM3,the simulation ability of the coupled model is improved.The coupling model has better ability in the simulation of the circulation in the middle and low levels,and the water vapor transportation in the coupling model is reasonable in both 1997 and 1998.RegCM3(an uncoupled model) cannot correctly simulate the transportation path differences between 1997 and 1998,but the coupled model can simulate the differences well.

Impacts of Surface Exchange Coefficients on Simulations of Super Typhoon Megi(2010)Using a Coupled Ocean-Atmosphere-Wave Model

In this study,the effects of surface exchange coefficients on simulations of Super Typhoon Megi(2010)are investigated using a fully coupled ocean-atmosphere-wave model.Several experiments are conducted using different parameterization schemes for the drag(C_(D))and enthalpy exchange(C_(K))coefficients.For the selected case,considering only the leveling-off of C_(D)at high wind speeds does not effectively improve the simulated typhoon track,intensity,or size.We found that increasing C_(K)monotonically with wind speed(Komori et al.,2018)yields stronger winds and deeper pressures by enhancing latent and sensible heat fluxes,but typhoon intensity remains underestimated.We propose a new higher C_(K)than that from Komori et al.(2018)based on the theory of Emanuel(1995).This approach produces a greater modeled typhoon intensity that is in good agreement with the best track data and effectively improves the track error for the simulation.Improved accuracy for modeled typhoon intensity is achieved with the new coefficient because C_(K)/C_(D)reaches the threshold of about 0.75 predicted by Emanuel(1995).The new proposed C_(K)also results in a reasonably accurate modeled sea surface temperature.However,typhoon size and surface wave height are overestimated.This finding implies that more numerical tests for tropical cyclones of different nature(such as strong,weak,dissipating,rapidly intensifying,or weakening tropical cyclones)should be studied,and more physical processes should be explored in future coupled models.

Does regional air–sea coupling improve the simulation of the summer monsoon over the western North Pacific in the WRF4 model?

A new regional coupled ocean–atmosphere model,WRF4-LICOM,was used to investigate the impacts of regional air–sea coupling on the simulation of the western North Pacific summer monsoon(WNPSM),with a focus on the normal WNPSM year 2005.Compared to WRF4,WRF4-LICOM improved the simulation of the summer mean monsoon rainfall,circulations,sea surface net heat fluxes,and propagations of the daily rainband over the WNP.The major differences between the models were found over the northern South China Sea and east of the Philippines.The warmer SST reduced the gross moist stability of the atmosphere and increased the upward latent heat flux,and then drove local ascending anomalies,which led to the increase of rainfall in WRF4-LICOM.The resultant enhanced atmospheric heating drove a low-level anomalous cyclone to its northwest,which reduced the simulated circulation biases in the stand-alone WRF4 model.The local observed daily SST over the WNP was a response to the overlying summer monsoon.In the WRF4 model,the modeled atmosphere exhibited passive response to the underlying daily SST anomalies.With the inclusion of regional air–sea coupling,the simulated daily SST–rainfall relationship was significantly improved.WRF4-LICOM is recommended for future dynamical downscaling of simulations and projections over this region.

Does Industry-University-Research Cooperation Matter? An Analysis of Its Coupling Effect on Regional Innovation and Economic Development

The dislocation between regional innovation and economic development directly influences the economic effect of regional innovation. However, no in-depth researches have been made on how to solve this problem. Using data from Henan Province, China,employing geographical detector technology, this paper focuses on testing whether the industry-university-research cooperation can contribute to coordinating the relation between regional innovation and economic development. It is shown that: 1) the industry-universityresearch cooperation in Henan Province is increasing gradually, and the network presents a core-edge structure, and the coupling degree between regional innovation and economic development is spatially unbalanced, which is similar to the spatial distribution of the intensity of industry-university-research cooperation;2) as an important approach to effectively connect scientific researches with market demands, the industry-university-research cooperation can help form an interactive, interconnected, coupled and coordinated virtuous relation between regional innovation and economic development. Compared with the cooperation between organizations of the same type and the separate innovation of organizations, the improvement of the industry-university-research cooperation level can better coordinate the relation between regional innovation and economic development;3) the cooperative innovation model between enterprises and universities can better promote the coupling between regional innovation and economic development, compared with many industryuniversity-research cooperation models. For underdeveloped areas lacking local knowledge base, industry-university-research cooperation should be considered as a long-term development strategy, especially using the knowledge sources of external universities and scientific research institutions to enhance innovation capability and achieve economic growth.

Regional earth system modeling：review and future directions

The authors review recent advances in the development of coupled Regional Earth System Models （RESMs）,a field that is still in its early stages.To date,coupled regional atmosphere-ocean-sea ice,atmosphere-aerosol and atmosphere-biosphere models have been developed,but they have been applied onlyto limited regional settings.Much more work is thus needed to assess their transferability to a wide range of settings.Future challenges in regional climate modeling are identified,including the development of fully coupled RESMs encompassing not only atmosphere,ocean,cryosphere,biosphere,chemosphere,but also the human component in a fully interactive way.

Projected Regional 1.50℃and 2.00℃Warming Threshold-crossing Time Worldwide Using the CMIP6 Models

The Paris Agreement aims to limit global warming to well below 2.00℃and pursue efforts to limit the temperature increase to 1.50℃.However,the response of climate change to unbalanced global warming is affected by spatial and temporal sensitivities.To better understand the regional warming response to global warming at 1.50℃and 2.00℃,we detected the 1.50℃and 2.00℃warming threshold-crossing time(WTT)above pre-industrial levels globally using the Coupled Model Intercomparison Project phase 6(CMIP6)models.Our findings indicate that the 1.50℃or 2.00℃WTT differs substantially worldwide.The warming rate of land would be approximately 1.35–1.46 times that of the ocean between 60°N–60°S in 2015–2100.Consequently,the land would experience a 1.50℃(2.00℃)warming at least 10–20 yr earlier than the time when the global mean near-surface air temperature reaches 1.50℃(2.00℃)WTT.Meanwhile,the Southern Ocean between 0°and 60°S considerably slows down the global 1.50℃and 2.00℃WTT.In 2040–2060,over 98.70%(77.50%),99.70%(89.30%),99.80%(93.40%),and 100.00%(98.00%)of the land will have warmed by over 1.50℃(2.00℃)under SSP(Shared Socioeconomic Pathway)1–2.6,SSP2-4.5,SSP3-7.0,and SSP5-8.5,respectively.We conclude that regional 1.50℃(2.00℃)WTT should be fully considered,especially in vulnerable high-latitude and high-altitude regions.

DEVELOPMENT OF A COUPLED REGIONAL AIR-SEA MODEL AND ITS NUMERICAL SIMULATION FOR SUMMER MONSOON IN 1998

A coupled regional air-sea model is developed by using the regional climate model (P-σ RCM) and the regional ocean model (POM),which is used to simulate East Asian monsoon and oceanic elements in East Asian coastal waters.The simulated surface layer oceanic elements are basically consistent with the reality and can reflect the interaction between the monsoon and the surface layer currents.The great difference with the reality is “cold drift” of the simulated surface temperature.The coupled model has certain ability to simulate the atmosphere geopotential height fields,precipitation and low-level southwest wind from May to August in 1998.It can display the process of summer monsoon onset during the third dekad of May and the evolution features after the onset.The differences between the simulation results of the coupled model and that of the single P-a RCM are shown mainly in the low-level atmosphere and the model internal regions.

Development and evaluation of a regional ocean-atmosphere coupled model with focus on the western North Pacific summer monsoon simulation:Impacts of different atmospheric components

A regional ocean atmosphere coupled model (ROAM) is developed through coupler OASIS3,and is composed of regional climate model RegCM3 and CREM (Climate version of Regional Eta Model) as its atmospheric component and of a revised Princeton ocean model (POM2000) as its oceanic component.The performance of the ROAM over the western North Pacific summer monsoon region is assessed by the case simulation of warm season in 1998.Impacts of different atmospheric model components on the performance of ROAM are investigated.Compared with stand-alone simulation,CREM (RegCM3) produces more (or less) rainfall over ocean area with inclusion of the air-sea coupling.Different biases of rainfall are caused by the different biases of SST derived from the coupled simulation.Warm (or cold) SST bias simulated by CREM_CPL (RegCM3_CPL) increases (or decreases) the evaporation at sea surface,then increases (or decreases) the rainfall over ocean.The analyses suggest that the biases of vertical profile of temperature and specific humidity in stand-alone simulations may be responsible for the SST biases in regional coupled simulations.Compared with reanalysis data,the warmer (or colder) and moister (or dryer) lower troposphere simulated in CREM (RegCM3) produces less (or more) sea surface latent heat flux.Meanwhile,the more unstable (or stable) lower troposphere produces less (or more) cloudiness at low-level,which increases (or decreases) the solar radiation reaching on the sea surface.CREM (RegCM3) forced by observed SST overestimates (or underestimates) the sea surface net heat flux,implying a potential warm (or cold) heat source.After coupling with POM2000,the warm (or cold) heat source would further increase (or decrease) the SST.The biases of vertical profile of temperature and specific humidity may be ascribed to the different representation of cumulus convection in atmospheric models.

Recent advances in regional air-sea coupled models

In this paper,we first briefly review the history of air-sea coupled models,and then introduce the current status and recent advances of regional air-sea coupled models.In particular,we discuss the core technical and scientific issues involved in the development of regional coupled models,including the coupling technique,lateral boundary conditions,the coupling with sea waves(ices),and data assimilation.Furthermore,we introduce the application of regional coupled models in numerical simulation and dynamical downscaling.Finally,we discuss the existing problems and future directions in the development of regional air-sea coupled models.

Simulation of China Summer Precipitation Using a Regional Air-Sea Coupled Model

A regional air-sea coupled model based on the regional climate model（RegCM3） and the regional oceanic model POM（Princeton Ocean Model） is developed and a series of experiments are performed to verify the ability of the coupled model in simulating the summer precipitation over China from 1963 to 2002.The results show that the space correlation coefficients between the GISST（Global Ice and Sea Surface Temperature） data and the simulated SST by RegCM3-POM exceed 0.9.Compared with the uncoupled experiments,the coupled model RegCM3-POM has a better performance in simulating the mean summer（June to August） precipitation over China,and the distribution of the rainband in the coupled model is more accurate.The improvement of the rainfall simulation is significant over the Yangtze River Valley and in South China.The rainbelt intraseasonal evolution over eastern China in summer indicates that the simulation ability of RegCM3-POM is improved in comparison with the uncoupled model.The interannual summer rainfall variation over eastern China simulated by RegCM3-POM is in accordance with observation,while the spatial pattern of the interannual summer rainfall variation in the uncoupled model is inaccurate.The simulated correlation coefficient between the summer rainfall in the uncoupled model RegCM3 and observation is 0.30 over the Yangtze River Valley and 0.29 in South China.The coefficient between the rainfall in the coupled RegCM3-POM and observation is 0.48 over the Yangtze River Valley and 0.61 in South China.The RegCM3-POM has successfully simulated the correlation coefficients between summer rainfall in the Yangtze River Valley and SST anomalies of the Bay of Bengal,South China Sea,and the Kuroshio area,whereas the uncoupled model RegCM3 fails to reproduce this relationship.The study further shows that the monsoon circulation and the path of the moisture transport flux simulated by RegCM3-POM are in good agreement with the NCEP/NCAR data.

Preliminary results of a regional air-sea coupled model over East Asia

We have established a regional air-sea coupled model over East Asia and conducted a 20-year integration to evaluate its performance in reproducing the present climate.The coupled model consists of RegCM3 and HYCOM controlled by the OASIS3 coupler with resuolution of 60 km for the atmosphere and 33 km for the ocean,respectively.Unlike some other regional air-sea coupled models,a one-way nesting method is employed in the oceanic component and a heat flux adjustment for solar radiation is used to remove an about 2°C cold bias in SST.The primary analysis for this 20-year integration shows that the coupled model successfully reproduces the main features of the circulations over East Asia,both in the atmosphere and the ocean,including climatology,seasonal and interannual variations.Improvements are seen in the coupled model compared to the uncoupled one,especially in the simulation of precipitation,the most important element of the East Asian monsoon,although there are still obvious discrepancies that come mainly from the model components themselves.Further analyses show that the rainfall simulation benefits from the enhancements of the Northwest Pacific Subtropical High in summer,which leads to the improvement of the moisture flux simula-tion at the middle-lower atmospheric circulation.The results indicate that the regional air-sea coupled model is more suitable for the East Asia monsoon simulation.

A static and dynamic factorscoupled forecasting model of regional rainfall-induced landslides:A case study of Shenzhen

Most rainfall-induced landslide forecasting models focus on the relation between landslides and rainfall,which is one of the dynamic factors,and seldom consider the stacitc factors,such as geological and geograpical factors.Landslide susceptibility,however,is determinded by both static and dynamic factors.This article proposes a static and dynamic factors-coupled forecasting model(SDFCFM) of regional rainfall-induced landslides,which quantitatively considers both the static and dynamic factors that affect landslides.The generalized additive model(GAM) is applied to coupling both factors to get the landslide susceptibility.In the case study,SDFCFM is applied to forecast the landslide occurrences in Shenzhen during a rainfall process in 2008.Compared with the rainfall logistic regression model,the resulting landslide susceptibility map illustrates that SDFCFM can reduce the forecast redundancy and improve the hit ratio.It is both applicable and practical.The application of SDFCFM in landslide warning and prevention system will improve its efficiency and also cut down the cost of human and matreial resources.

Simulation of the western North Pacific summer monsoon by regional ocean–atmosphere coupled model:impacts of oceanic components

A successful simulation of the western North Pacific summer monsoon needs a regional ocean–atmosphere coupled model(ROAM). How the performance of ROAM relies on the oceanic component model remains unknown. In this study, the authors investigated the effects of different oceanic components on the simulation of western North Pacific(WNP) summer monsoon in a ROAM. Three cases of simulations were performed, viz. the summer of 1998(El Nin o decaying phase), 2004(El Nin o developing phase), and 1993(the non-ENSO phase). Results show that the coupled simulations for different ENSO phases exhibit improvements in the simulation of location of Meiyu rainband and spatial distribution of monsoon low-level flow over WNP, whereas the systemic cold biases of sea surface air temperature are further increased. The coupled simulations with different oceanic components show similar performance, which is not ENSO phase dependent. For the case of the summer of 1998, a slightly stronger western Pacific subtropical high and colder sea surface air temperature are found in the simulation with colder sea surface temperature(SST) biases. The colder SST biases are partly contributed by the ocean dynamics processes because the sea surface net flux favors a warmer SST. This study suggests that the dependence of performance of ROAM over WNP on oceanic models is much weaker than that on atmospheric models.

Improved ENSO simulation in regional coupled GCM using regressive correction method

A regressive correction method is presented with the primary goal of improving ENSO simulation in regional coupled GCM. It focuses on the correction of ocean-atmosphere exchanged fluxes. On the basis of numerical experiments and analysis, the method can be described as follows: first, driving the ocean model with heat and momentum flux computed from a long-term observation data set; the pro-duced SST is then applied to force the AGCM as its boundary condition; after that the AGCM’s simula-tion and the corresponding observation can be correlated by a linear regressive formula. Thus the re-gressive correction coefficients for the simulation with spatial and temporal variation could be obtained by linear fitting. Finally the coefficients are applied to redressing the variables used for the calculation of the exchanged air-sea flux in the coupled model when it starts integration. This method together with the anomaly coupling method is tested in a regional coupled model, which is composed of a global grid-point atmospheric general circulation model and a high-resolution tropical Pacific Ocean model. The comparison of the results shows that it is superior to the anomaly coupling both in reducing the coupled model ‘climate drift’ and in improving the ENSO simulation in the tropical Pacific Ocean.

Simulation and Analysis of China Climate Using Two-Way Interactive Atmosphere-Vegetation Model (RIEMS-AVIM)

In this paper, an Atmosphere-Vegetation Interaction Model （AVIM） is coupled to the Regional Integrated Environment Model System （RIEMS）, and a 10-year integration for China is performed using the RIEMS-AVIM. The analysis of the results of the 10-year integration shows that the characters of the spatial distributions of temperature and precipitation over China are well simulated. The patterns of simulated surface sensible and latent heat fluxes match well with the spatial climatological atlas： the values of winter surface sensible and latent heat fluxes are both lower than climatological values over the whole country. Summer surface sensible heat flux is higher than climatological values in western China and lower in eastern China, while summer surface latent heat flux is higher than climatological values in the eastern and lower in the western. Seasonal variations of simulated temperature and precipitation of RIMES-AVIM agree with those of the observed. Simulated temperature is lower than the observed in the Tibetan Plateau and Northwest China for the whole year, slightly lower in the remaining regions in winter, but consistent with the observed in summer. The simulated temperature of RIEMS-AVIM is higher in winter and lower in summer than that of RIEMS, which shows that the simulated temperature of RIEMS-AVIM is closer to the observed value. Simulated precipitation is excessive in the first half of the year, but consistent with the observed in the second half of the year. The simulated summer precipitation of RIEMS-AVIM has significant improvement compared to that of RIEMS, which is less and closer to the observed value. The interannual variations of temperature and precipitation are also fairly well simulated, with temperature simulation being superior to precipitation simulation. The interannual variation of simulated temperature is significantly correlated with the observed in Northeast China, the Transition Region, South China, and the Tibetan Plateau, but the correlation between precipitation simulation and observation is only significant in Northwest China.

A Robustness Analysis of CMIP5 Models over the East Asia-Western North Pacific Domain

The Coupled Model Intercomparison Project （CMIP） is an international community-based infrastructure that supports climate model intercomparison, climate variability, climate prediction, and climate projection. Improving the performance of climate models over East Asia and the western North Pacific has been a challenge for the climate-modeling community. In this paper, we provide a synthesis robustness analysis of the climate models participating in CMIP-Phase 5 （CMIP5）. The strengths and weaknesses of the CMIP5 models are assessed from the perspective of climate mean state, interannual variability, past climate change during the mid-Pliocene （MP） and the last millennium, and climate projection. The added values of regional climate models relative to the driving global climate models are also assessed. Although an encouraging increase in credibility and an improvement in the simulation of mean states, interannual variability, and past climate changes are visible in the progression from CMIP3 to CMIPS, some previously noticed biases such as the ridge position of the western North Pacific subtropical high and the associated rainfall bias are still evident in CMIP5 models. Weaknesses are also evident in simulations of the interannual amplitude, such as El Nino- Southern Oscillation （ENSO）-monsoon relationships. Coupled models generally show better results than standalone atmospheric models in simulating both mean states and interannual variability. Multi-model intercomparison indicates significant uncertainties in the future projection of climate change, although precipitation increases consistently across models constrained by the Clausius-Clapeyron relation. Regional ocean-atmosphere coupled models are recommended for the dynamical downscaling of climate change oroiections over the East Asia-western North Pacific domain.