The reinforced concrete(RC) structural component might suffer a great damage under close-in explosion.Different from distant explosions, blast loads generated by the close-in explosion are non-uniformly distributed on...The reinforced concrete(RC) structural component might suffer a great damage under close-in explosion.Different from distant explosions, blast loads generated by the close-in explosion are non-uniformly distributed on the structural component and may cause both local and structural failure. In this study,an experimental study was conducted to investigate the dynamic responses of RC beams under doubleend-initiated close-in explosions. The experimental results show that the distribution of blast loads generated by the double-end-initiated explosion is much more non-uniform than those generated by single-point detonation, which is caused by the self-Mach-reflection effects. A 3 D finite element model was developed and validated in LS-DYNA by employing the modified K&C model. Intensive numerical calculations were conducted to study the influences of the initiation way, scaled distance and longitudinal reinforcement ratio on the dynamic responses and failure modes of RC beams. Numerical results show that the RC beam suffers greater damage as the cylindrical explosive is detonated at its double ends than the scenario in which the cylindrical explosive is detonated at its central point. RC beams mainly suffer flexural failure and flexure-shear failure under the double-end close-in explosion, and the failure modes of RC beams change from the flexural damage to flexure-shear damage as the scaled distance or the longitudinal reinforcement ratio decreases. The direct shear failure mode is not usually observed in the double-end-initiated explosion, since the intense blast loads is basically concentrated in the midspan of RC beam, which is due to self-Mach-reflection enhancement.展开更多
Based on an assumption of parabolic bond stress distribution,a simplified model with quartic polynomial function of the relative slip of steel bar and surrounding concrete for reinforced concrete (RC)tensile member wa...Based on an assumption of parabolic bond stress distribution,a simplified model with quartic polynomial function of the relative slip of steel bar and surrounding concrete for reinforced concrete (RC)tensile member was proposed. The post-cracking behavior as well as tension stiffening effect was considered in the new model. The relative slip of bending member could also be determined through the extension of the new model,which could be applied to obtaining the concentrated rotations at certain sections in order to predict the flexural deformation of RC beam. Several examples of four-point bending RC beams were approached to verify the new model,and the predictions of the flexural deflections of RC beams agreed well with experimental results. The new model can be extended to the application of partially corroded RC beam.展开更多
As an important component,the bond behavior of carbon fiber-reinforced polymer(CFRP)-concrete interface for a reinforced concrete(RC)beam is very significant.In this study,a theoretical model was established to analyz...As an important component,the bond behavior of carbon fiber-reinforced polymer(CFRP)-concrete interface for a reinforced concrete(RC)beam is very significant.In this study,a theoretical model was established to analyze the flexural behavior of CFRP-strengthened RC beams,and the CFRP-concrete interfacial bond-slip relationship under hygrothermal environment was unified into one model.Two failure criteria corresponding to two types of failure modes,i.e.,concrete crushing and intermediate crack(IC)-induced debonding,were developed.Through the theoretical model,the flexural behavior of deflection,interfacial shear stress distribution and ultimate load of a CFRP-strengthened RC beam under hygrothermal environment were obtained and predicted.Moreover,the theoretical model was verified by test results.The results showed that the hygrothermal environment had a significant impact on the CFRP-concrete interface behavior.Compared with the control beam without hygrothermal environment pretreatment,the deflection and ultimate load of the strengthened RC beam decreased by 51.9%and 20%,respectively.展开更多
The ultimate strength of reinforced concrete(RC) rectangular members subjected to combined bending,shear and torsion is obtained from the limit analysis proposed in the present paper. Based on a warped failure surface...The ultimate strength of reinforced concrete(RC) rectangular members subjected to combined bending,shear and torsion is obtained from the limit analysis proposed in the present paper. Based on a warped failure surface determined by external loads, and a reasonable assumed stress distribution balancing external loads but not violating the yield condition, the bending-shear-torsion interaction can be derived from equilibrium conditions.According to the definition of lower-bound theorem in limit analysis, the calculated ultimate loads will be carried safely by the structure. The present method is a simple approach to obtain carrying capacities for RC elements under complex external loads. After comparing with the test results, a good agreement has been observed. The present method can be extended to explain the failure mechanism of RC members subjected to axial loads, and it is possible to develop a simple unified theory of RC members for engineering.展开更多
基金supported by the National Natural Science Foundations of China(Nos. 51622812, and 51427807)National Basic Research Program of China(No. 2015CB058003)China Postdoctoral Science Foundation(No. 2017M613379)
文摘The reinforced concrete(RC) structural component might suffer a great damage under close-in explosion.Different from distant explosions, blast loads generated by the close-in explosion are non-uniformly distributed on the structural component and may cause both local and structural failure. In this study,an experimental study was conducted to investigate the dynamic responses of RC beams under doubleend-initiated close-in explosions. The experimental results show that the distribution of blast loads generated by the double-end-initiated explosion is much more non-uniform than those generated by single-point detonation, which is caused by the self-Mach-reflection effects. A 3 D finite element model was developed and validated in LS-DYNA by employing the modified K&C model. Intensive numerical calculations were conducted to study the influences of the initiation way, scaled distance and longitudinal reinforcement ratio on the dynamic responses and failure modes of RC beams. Numerical results show that the RC beam suffers greater damage as the cylindrical explosive is detonated at its double ends than the scenario in which the cylindrical explosive is detonated at its central point. RC beams mainly suffer flexural failure and flexure-shear failure under the double-end close-in explosion, and the failure modes of RC beams change from the flexural damage to flexure-shear damage as the scaled distance or the longitudinal reinforcement ratio decreases. The direct shear failure mode is not usually observed in the double-end-initiated explosion, since the intense blast loads is basically concentrated in the midspan of RC beam, which is due to self-Mach-reflection enhancement.
基金National Key Basic Research and Development Program(973Program),China(No.2002CB412709)
文摘Based on an assumption of parabolic bond stress distribution,a simplified model with quartic polynomial function of the relative slip of steel bar and surrounding concrete for reinforced concrete (RC)tensile member was proposed. The post-cracking behavior as well as tension stiffening effect was considered in the new model. The relative slip of bending member could also be determined through the extension of the new model,which could be applied to obtaining the concentrated rotations at certain sections in order to predict the flexural deformation of RC beam. Several examples of four-point bending RC beams were approached to verify the new model,and the predictions of the flexural deflections of RC beams agreed well with experimental results. The new model can be extended to the application of partially corroded RC beam.
基金The authors would like to acknowledge the financial support from the National Natural Science Foundation of China(Nos.11872185,11627802,51678249,11132004)the Natural Science Foundation of Guangdong Province(No.2019A1515012222).
文摘As an important component,the bond behavior of carbon fiber-reinforced polymer(CFRP)-concrete interface for a reinforced concrete(RC)beam is very significant.In this study,a theoretical model was established to analyze the flexural behavior of CFRP-strengthened RC beams,and the CFRP-concrete interfacial bond-slip relationship under hygrothermal environment was unified into one model.Two failure criteria corresponding to two types of failure modes,i.e.,concrete crushing and intermediate crack(IC)-induced debonding,were developed.Through the theoretical model,the flexural behavior of deflection,interfacial shear stress distribution and ultimate load of a CFRP-strengthened RC beam under hygrothermal environment were obtained and predicted.Moreover,the theoretical model was verified by test results.The results showed that the hygrothermal environment had a significant impact on the CFRP-concrete interface behavior.Compared with the control beam without hygrothermal environment pretreatment,the deflection and ultimate load of the strengthened RC beam decreased by 51.9%and 20%,respectively.
基金the National Natural Science Foundation of China(No.51178265)
文摘The ultimate strength of reinforced concrete(RC) rectangular members subjected to combined bending,shear and torsion is obtained from the limit analysis proposed in the present paper. Based on a warped failure surface determined by external loads, and a reasonable assumed stress distribution balancing external loads but not violating the yield condition, the bending-shear-torsion interaction can be derived from equilibrium conditions.According to the definition of lower-bound theorem in limit analysis, the calculated ultimate loads will be carried safely by the structure. The present method is a simple approach to obtain carrying capacities for RC elements under complex external loads. After comparing with the test results, a good agreement has been observed. The present method can be extended to explain the failure mechanism of RC members subjected to axial loads, and it is possible to develop a simple unified theory of RC members for engineering.
