Vibration and power flow analysis of periodically reinforced plates

In this paper an analytical method is proposed to investigate the vibration and power flows of periodically reinforced plate with general boundary conditions. Both the plate and stiffening beams are modeled as 3D structural components, and the couplings at the interfaces are specified in terms of 3D elastic joints. The displacement function for each stiffening beam is expressed as a modified Fourier cosine series, and the transverse and in-plane displacements for the plate are similarly expressed as the 2D versions of the modified Fourier cosine series expansions. The unknown Fourier coefficients are calculated using the Rayleigh-Ritz technique. The key advantages of the proposed method include: 1) it is capable of dealing with arbitrary boundary and coupling conditions, 2) it allows modeling any number of reinforcing beams with arbitrary lengths, and 3) the structural intensity, power flows, and kinetic energy distributions are readily calculated analytically from the displacement functions through appropriate mathematical (differential) operations, to name a few. The power flow characteristics of periodically reinforced plates are studied against various influencing factors, such as, plate and beam boundary conditions, coupling conditions, excitation locations, and dislocations resulting from minor misplacement of a reinforcing beam.

Bending and stress analysis of polymeric composite plates reinforced with functionally graded graphene platelets based on sinusoidal shear-deformation plate theory

The bending and stress analysis of a functionally graded polymer composite plate reinforced with graphene platelets are studied in this paper.The governing equations are derived by using principle of virtual work for a plate which is rested on Pasternak’s foundation.Sinusoidal shear deformation theory is used to describe displacement field.Four different distribution patterns are employed in our analysis.The analytical solution is presented for a functionally graded plate to investigate the influence of important parameters.The numerical results are presented to show the deflection and stress results of the problem for four employed patterns in terms of geometric parameters such as number of layers,weight fraction and two parameters of Pasternak’s foundation.

Plate reinforced square hollow section X-joints subjected to in-plane moment

The static test of 13 square hollow section(SHS) X-joints with different β and different types of plate reinforcement under in-plane moment in brace was carried out. Experimental test schemes, failure modes of specimens, moment-vertical displacement curves, moment-deformation of the chord, and strain strength distribution curves were presented. The effect of β and plate reinforcement types on in-plane flexural property of SHS X-joints was studied. Results show that punching shear of chord face disappears, brace material fracture appears and concave and convex deformation of chord decrease when either collar plates or doubler plates were welded on chord face. Moment-vertical displacement curves of all specimens have obvious elastic, elastic-plastic and plastic stages. As β increases, the in-plane flexural ultimate capacity and initial stiffness of joints of the same plate reinforcement type increase, but ductility of joints decreases. With the same β, the in-plane flexural initial stiffness and ultimate capacity of doubler plate reinforced joints, collar plate reinforced joints, and unreinforced joints decrease progressively. Thickness of reinforcement plate has no obvious effect on in-plane flexural initial stiffness and ultimate capacity of joints. As thickness of reinforcement plate increases, the ductility of reinforced X-joints decreases. The concave and convex deformation of every specimen has good symmetry;as β increases, the yield and ultimate deformation of chord decrease.

Finite Element Analysis of Reinforced Concrete Plate Impacted by Block

A new concept of structurally dissipating rock-shed (SDR) was developed by the lab of Tonello IC and LOCIE-ESIGEC (France). To decide the dimension of the plate used in SDR, an ANSYS model which could simulate the impact of rock in the centre of the plate was established by Fabien Delhomme. By using this model, some finite element analyses are carried out in the present paper. Firstly, a plate impacted by a block is numerically simulated, the numerical results obtained from different mesh sizes are compared and the accuracy of the finite element model is verified. Then, the dynamic response of the plate impacted at the boundary and in the medium part is computed. By analyzing the stress in rebar, the most dangerous region of impact of plate was found. For a rectangular plate, the most dangerous region is at the corner of the plate when a block drops in. Finally, the whole deformation process of the plate under dropping block was simulated and a simplified definition (effect zone) to describe the deformation process in different positions of plate was given. From this study, it is found that the impact only affects heavily within the effect zone.