To investigate the seismic response of the steel-strip reinforced soil retaining wall with fullheight rigid facing in terms of the acceleration in the backfill, dynamic earth pressure in the backfill, the displacement...To investigate the seismic response of the steel-strip reinforced soil retaining wall with fullheight rigid facing in terms of the acceleration in the backfill, dynamic earth pressure in the backfill, the displacements on the facing and the dynamic reinforcement strain distribution under different peak acceleration, a large 1-g shaking table test was performed on a reduced-scale reinforced-earth retaining wall model. It was observed that the acceleration response in non-strip region is greater than that in potential fracture region which is similar with the stability region under small earthquake,while the acceleration response in potential fracture region is greater than that in stability region in middle-upper of the wall under moderately strong earthquakes. The potential failure model of the rigid wall is rotating around the wall toe. It also was discovered that the Fourier spectra produced by the inputting white noises after seismic wave presents double peaks, rather than original single peak, and the frequency of the second peak trends to increase with increasing the PGA(peak ground amplitude) of the excitation which is greater than 0.4 g. Additionally,the non-liner distribution of strip strain along the strips was observed, and the distribution trend was not constant in different row. Soil pressure peak value in stability region is larger than that in potential fracture region. The wall was effective under 0.1 g-0.3 g seismic wave according to the analyses of the facing displacement and relative density. Also, it was discovered that the potential failure surface is corresponds to that in design code, but the area is larger. The results from the study can provide guidance for a more rational design of reinforced earth retaining walls with full-height rigid facing in the earthquake zone.展开更多
In order to evaluate the seismic stability of reinforced soil walls against bearing capacity failure,the seismic safety factor of reinforced soil walls was determined by using pseudo-dynamic method,and calculated by c...In order to evaluate the seismic stability of reinforced soil walls against bearing capacity failure,the seismic safety factor of reinforced soil walls was determined by using pseudo-dynamic method,and calculated by considering different parameters,such as horizontal and vertical seismic acceleration coefficients,ratio of reinforcement length to wall height,back fill friction angle,foundation soil friction angle,soil reinforcement interface friction angle and surcharge.The parametric study shows that the seismic safety factor increases by 24-fold when the foundation soil friction angle varies from 25°to 45°,and increases by 2-fold when the soil reinforcement interface friction angle varies from 0 to 30°.That is to say,the bigger values the foundation soil and/or soil reinforcement interface friction angles have,the safer the reinforced soil walls become in the seismic design.The results were also compared with those obtained from pseudo-static method.It is found that there is a higher value of the safety factor by the present work.展开更多
Because of its excellent seismic performance, reinforced soil retaining walls are increasingly used in civil engineering. Although many countries have published corresponding design codes, the differences between them...Because of its excellent seismic performance, reinforced soil retaining walls are increasingly used in civil engineering. Although many countries have published corresponding design codes, the differences between them are still relatively large. Using the FHWA Code and the Code for Seismic Design of Railway Engineering(CSDRE), stability calculations of reinforced soil retaining walls were carried out and the similarities and differences between these two design codes were analyzed. According to the comparative analysis, the following conclusions are drawn: the inertia force, the earth pressure and the tensile force of reinforcements calculated from the CSDRE are less than those from the FHWA Code, and the safety factor calculated from the former is larger. Although the M-O method is recommended to calculate the dynamic earth pressure, the FHWA Code suggests a higher action point as compared to the CSDRE.展开更多
The use of marginal backfills in GSE （geosynthetic stabilized earth） walls has not been recommended by different standards specifications. Restrictions are motivated by the poor hydraulic conductivity of fine soils ...The use of marginal backfills in GSE （geosynthetic stabilized earth） walls has not been recommended by different standards specifications. Restrictions are motivated by the poor hydraulic conductivity of fine soils that are capable of developing of water pressures. However, the use of granular materials can expend the cost of the construction. As a result, local soils, granular or not, have been increasingly used. Unsaturated conditions of fine soils may result in convenient performance even using extensible reinforcements. This paper evaluates the performance of a full scale model of a nonwoven geotextile reinforced wall constructed with fine grained soil backfill. The unsaturated condition was maintained and matric suctions, displacements and reinforcement strains were monitored during the test. Results have shown that the unsaturated condition of the backfill allowed maximum reinforcement peak strain of 0.4 %. For the case of a wrap faced wall on a firm foundation the performance and good agreement between measured strains and factors of safety from limit equilibrium analyses have shown the maintenance of unsaturated conditions as an economical alternative to the use of high quality fill.展开更多
This paper presents an experimental and analytical investigation of the influence of variables related to soil weathering on the geomechanical performance of sand-silt mixtures containing lateritic soils,i.e.intensely...This paper presents an experimental and analytical investigation of the influence of variables related to soil weathering on the geomechanical performance of sand-silt mixtures containing lateritic soils,i.e.intensely weathered tropical soils with the influence of interparticle bonding.The sand-silt mixtures containing different relative proportions between uniform sand and lateritic soil were produced,and geomechanical soil characterization tests were performed.Based on the results,a transition from a primarily coarse-to a fine-grained prevailing soil structure was found to cause considerable impact on the geomechanical performance of these soils,as evidenced by design variables related to soil mineralogy and size distribution characteristics.Specifically,fines contents of both individual soil particles and soil aggregations were found to correlate with experimental results,while the relative proportion between sesquioxides(aluminum,and iron oxides),and silica,i.e.sesquioxide-silica ratios(SSR^(-1)),facilitated estimates concerning changes in geomechanical performance.Finally,the application of the sandsilt mixtures containing lateritic soil on soil walls reinforced with polymeric strips was also evaluated,further emphasizing the potential advantages of adopting variables related to soil weathering on design guidelines concerning tropical soils.展开更多
基金founded by the National Natural Science Foundation of China(Grant No.51708163)Research Program of the Ministry of Transport of the People’s Republic of China(Grant No.2013318800020)Doctoral Innovation Fund Program of Southwest Jiaotong University(Grant No.D-CX201703)
文摘To investigate the seismic response of the steel-strip reinforced soil retaining wall with fullheight rigid facing in terms of the acceleration in the backfill, dynamic earth pressure in the backfill, the displacements on the facing and the dynamic reinforcement strain distribution under different peak acceleration, a large 1-g shaking table test was performed on a reduced-scale reinforced-earth retaining wall model. It was observed that the acceleration response in non-strip region is greater than that in potential fracture region which is similar with the stability region under small earthquake,while the acceleration response in potential fracture region is greater than that in stability region in middle-upper of the wall under moderately strong earthquakes. The potential failure model of the rigid wall is rotating around the wall toe. It also was discovered that the Fourier spectra produced by the inputting white noises after seismic wave presents double peaks, rather than original single peak, and the frequency of the second peak trends to increase with increasing the PGA(peak ground amplitude) of the excitation which is greater than 0.4 g. Additionally,the non-liner distribution of strip strain along the strips was observed, and the distribution trend was not constant in different row. Soil pressure peak value in stability region is larger than that in potential fracture region. The wall was effective under 0.1 g-0.3 g seismic wave according to the analyses of the facing displacement and relative density. Also, it was discovered that the potential failure surface is corresponds to that in design code, but the area is larger. The results from the study can provide guidance for a more rational design of reinforced earth retaining walls with full-height rigid facing in the earthquake zone.
文摘In order to evaluate the seismic stability of reinforced soil walls against bearing capacity failure,the seismic safety factor of reinforced soil walls was determined by using pseudo-dynamic method,and calculated by considering different parameters,such as horizontal and vertical seismic acceleration coefficients,ratio of reinforcement length to wall height,back fill friction angle,foundation soil friction angle,soil reinforcement interface friction angle and surcharge.The parametric study shows that the seismic safety factor increases by 24-fold when the foundation soil friction angle varies from 25°to 45°,and increases by 2-fold when the soil reinforcement interface friction angle varies from 0 to 30°.That is to say,the bigger values the foundation soil and/or soil reinforcement interface friction angles have,the safer the reinforced soil walls become in the seismic design.The results were also compared with those obtained from pseudo-static method.It is found that there is a higher value of the safety factor by the present work.
基金sponsored by the Project of Science and Technology Research and Development Plan of China Railway Corporation(Grant No.2014G003-C)
文摘Because of its excellent seismic performance, reinforced soil retaining walls are increasingly used in civil engineering. Although many countries have published corresponding design codes, the differences between them are still relatively large. Using the FHWA Code and the Code for Seismic Design of Railway Engineering(CSDRE), stability calculations of reinforced soil retaining walls were carried out and the similarities and differences between these two design codes were analyzed. According to the comparative analysis, the following conclusions are drawn: the inertia force, the earth pressure and the tensile force of reinforcements calculated from the CSDRE are less than those from the FHWA Code, and the safety factor calculated from the former is larger. Although the M-O method is recommended to calculate the dynamic earth pressure, the FHWA Code suggests a higher action point as compared to the CSDRE.
文摘The use of marginal backfills in GSE （geosynthetic stabilized earth） walls has not been recommended by different standards specifications. Restrictions are motivated by the poor hydraulic conductivity of fine soils that are capable of developing of water pressures. However, the use of granular materials can expend the cost of the construction. As a result, local soils, granular or not, have been increasingly used. Unsaturated conditions of fine soils may result in convenient performance even using extensible reinforcements. This paper evaluates the performance of a full scale model of a nonwoven geotextile reinforced wall constructed with fine grained soil backfill. The unsaturated condition was maintained and matric suctions, displacements and reinforcement strains were monitored during the test. Results have shown that the unsaturated condition of the backfill allowed maximum reinforcement peak strain of 0.4 %. For the case of a wrap faced wall on a firm foundation the performance and good agreement between measured strains and factors of safety from limit equilibrium analyses have shown the maintenance of unsaturated conditions as an economical alternative to the use of high quality fill.
文摘This paper presents an experimental and analytical investigation of the influence of variables related to soil weathering on the geomechanical performance of sand-silt mixtures containing lateritic soils,i.e.intensely weathered tropical soils with the influence of interparticle bonding.The sand-silt mixtures containing different relative proportions between uniform sand and lateritic soil were produced,and geomechanical soil characterization tests were performed.Based on the results,a transition from a primarily coarse-to a fine-grained prevailing soil structure was found to cause considerable impact on the geomechanical performance of these soils,as evidenced by design variables related to soil mineralogy and size distribution characteristics.Specifically,fines contents of both individual soil particles and soil aggregations were found to correlate with experimental results,while the relative proportion between sesquioxides(aluminum,and iron oxides),and silica,i.e.sesquioxide-silica ratios(SSR^(-1)),facilitated estimates concerning changes in geomechanical performance.Finally,the application of the sandsilt mixtures containing lateritic soil on soil walls reinforced with polymeric strips was also evaluated,further emphasizing the potential advantages of adopting variables related to soil weathering on design guidelines concerning tropical soils.
