The strength curves of lightweight aggregate concrete （LWAC） were tested based on detecting LWAC with density of 1 400-1 900 kg/m3 and LWAC with strength grade of LC15-LC50 by rebound method and ultrasonic-rebound c...The strength curves of lightweight aggregate concrete （LWAC） were tested based on detecting LWAC with density of 1 400-1 900 kg/m3 and LWAC with strength grade of LC15-LC50 by rebound method and ultrasonic-rebound combined method.The results show that the common measured strength curves tested by above two methods can not satisfy the required accuracy of LWAC strength test.In addition,specified compressive strength curves of testing LWAC by rebound method and ultrasonic-rebound combined method are obtained,respectively.展开更多
An orthotropic constitutive relationship with temperature parameters for plain highstrength high-performance concrete （HSHPC） under biaxial compression is developed. It is based on the experiments performed for char...An orthotropic constitutive relationship with temperature parameters for plain highstrength high-performance concrete （HSHPC） under biaxial compression is developed. It is based on the experiments performed for characterizing the strength and deformation behavior at two strength levels of HSHPC at 7 different stress ratios including a=σs ： σ3=0.00：-1,-0.20：-1,-0.30 ： -1,-0.40：-1,-0.50：-1,-0.75：-1,-1.00：-1, after the exposure to normal and high temperatures of 20, 200, 300, 400, 500 and 600℃, and using a large static-dynamic true triaxial machine. The biaxial tests were performed on 100 mm×100 mm×100 mm cubic specimens, and friction-reducing pads were used consisting of three layers of plastic membrane with glycerine in-between for the compressive loading plane. Based on the experimental results, failure modes of HSHPC specimens were described. The principal static compressive strengths, strains at the peak stress and stress-strain curves were measured; and the influence of the temperature and stress ratios on them was also analyzed. The experimental results showed that the uniaxial compressive strength of plain HSHPC after exposure to high temperatures does not decrease dramatically with the increase of temperature. The ratio of the biaxial to its uniaxial compressive strength depends on the stress ratios and brittleness-stiffness of HSHPC after exposure to different temperature levels. Comparison of the stress-strain results obtained from the theoretical model and the experimental data indicates good agreement.展开更多
The compressive strength of concrete is one of most important mechanical parameters in the performance assessment of existing reinforced concrete structures.According to various international codes,core samples are dr...The compressive strength of concrete is one of most important mechanical parameters in the performance assessment of existing reinforced concrete structures.According to various international codes,core samples are drilled and tested to obtain the concrete compressive strengths.Non-destructive testing is an important alternative when destructive testing is not feasible without damaging the structure.The commonly used non-destructive testing(NDT)methods to estimate the in-situ values include the Rebound hammer test and the Ultrasonic Pulse Velocity test.The poor reliability of these tests due to different aspects could be partially contrasted by using both methods together,as proposed.in the SonReb method.There are three techniques that are commonly used to predict the compressive strength of concrete based on the SonReb measurements:computational modeling,artificial intelligence,and parametric multi-variable regression models.In a previous study the accuracy of the correlation formulas deduced from the last technique has been investigated in comparison with the effective compressive strengths based on destructive test results on core drilled in adjacent locations.The aim of this study is to verify the accuracy of Artificial Neural Approach comparing the estimated compressive strengths based on NDT measured parameters with the same effective compressive strengths.The comparisons show the best performance of ANN approach.展开更多
The aim of this study is to provide the quantificational change laws of strength,stiffness,and deformation capacity of frost-damaged concrete relating to a united index,the data were obtained by different researchers....The aim of this study is to provide the quantificational change laws of strength,stiffness,and deformation capacity of frost-damaged concrete relating to a united index,the data were obtained by different researchers.Then the index of relative compressive strength（RCS） was introduced as the indicator of frost damage and a large number of mechanical performance testing data of frost-damaged concrete were collected and analyzed.By curve fitting,the correlations between RCS and the initial elastic modulus,the strain at peak compressive stress,and biaxial compressive strength,and tensile strength,and the strain at peak tensile stress were established.Thereafter,the analytical stress-strain response of frost-damaged concrete under monotonic loading was presented using RCS and compared with that of the experimental data.Moreover,an isotropic elastoplastic damage model of frost-damaged concrete subjected to repeated loading was established.Finally,we can systematically estimate the effects of frost-damage on the mechanical performance of concrete,which can be provided for the numerical simulation of frost-damaged concrete structures.展开更多
Uniaxial compressive strength(UCS)of rock is an essential parameter in geotechnical engineering.Point load strength(PLS),P-wave velocity,and Schmidt hammer rebound number(SH)are more easily obtained than UCS and are e...Uniaxial compressive strength(UCS)of rock is an essential parameter in geotechnical engineering.Point load strength(PLS),P-wave velocity,and Schmidt hammer rebound number(SH)are more easily obtained than UCS and are extensively applied for the indirect estimation of UCS.This study collected 1080 datasets consisting of SH,P-wave velocity,PLS,and UCS.All datasets were integrated into three categories(sedimentary,igneous,and metamorphic rocks)according to lithology.Stacking models combined with tree-based models and linear regression were developed based on the datasets of three rock types.Model evaluation showed that the stacking model combined with random forest and linear regression was the optimal model for three rock types.UCS of metamorphic rocks was less predictable than that of sedimentary and igneous rocks.Nonetheless,the proposed stacking models can improve the predictive performance for UCS of metamorphic rocks.The developed predictive models can be applied to quickly predict UCS at engineering sites,which benefits the rapid and intelligent classification of rock masses.Moreover,the importance of SH,P-wave velocity,and PLS were analyzed for the estimation of UCS.SH was a reliable indicator for UCS evaluation across various rock types.P-wave velocity was a valid parameter for evaluating the UCS of igneous rocks,but it was not reliable for assessing the UCS of metamorphic rocks.展开更多
文摘The strength curves of lightweight aggregate concrete （LWAC） were tested based on detecting LWAC with density of 1 400-1 900 kg/m3 and LWAC with strength grade of LC15-LC50 by rebound method and ultrasonic-rebound combined method.The results show that the common measured strength curves tested by above two methods can not satisfy the required accuracy of LWAC strength test.In addition,specified compressive strength curves of testing LWAC by rebound method and ultrasonic-rebound combined method are obtained,respectively.
文摘An orthotropic constitutive relationship with temperature parameters for plain highstrength high-performance concrete （HSHPC） under biaxial compression is developed. It is based on the experiments performed for characterizing the strength and deformation behavior at two strength levels of HSHPC at 7 different stress ratios including a=σs ： σ3=0.00：-1,-0.20：-1,-0.30 ： -1,-0.40：-1,-0.50：-1,-0.75：-1,-1.00：-1, after the exposure to normal and high temperatures of 20, 200, 300, 400, 500 and 600℃, and using a large static-dynamic true triaxial machine. The biaxial tests were performed on 100 mm×100 mm×100 mm cubic specimens, and friction-reducing pads were used consisting of three layers of plastic membrane with glycerine in-between for the compressive loading plane. Based on the experimental results, failure modes of HSHPC specimens were described. The principal static compressive strengths, strains at the peak stress and stress-strain curves were measured; and the influence of the temperature and stress ratios on them was also analyzed. The experimental results showed that the uniaxial compressive strength of plain HSHPC after exposure to high temperatures does not decrease dramatically with the increase of temperature. The ratio of the biaxial to its uniaxial compressive strength depends on the stress ratios and brittleness-stiffness of HSHPC after exposure to different temperature levels. Comparison of the stress-strain results obtained from the theoretical model and the experimental data indicates good agreement.
文摘The compressive strength of concrete is one of most important mechanical parameters in the performance assessment of existing reinforced concrete structures.According to various international codes,core samples are drilled and tested to obtain the concrete compressive strengths.Non-destructive testing is an important alternative when destructive testing is not feasible without damaging the structure.The commonly used non-destructive testing(NDT)methods to estimate the in-situ values include the Rebound hammer test and the Ultrasonic Pulse Velocity test.The poor reliability of these tests due to different aspects could be partially contrasted by using both methods together,as proposed.in the SonReb method.There are three techniques that are commonly used to predict the compressive strength of concrete based on the SonReb measurements:computational modeling,artificial intelligence,and parametric multi-variable regression models.In a previous study the accuracy of the correlation formulas deduced from the last technique has been investigated in comparison with the effective compressive strengths based on destructive test results on core drilled in adjacent locations.The aim of this study is to verify the accuracy of Artificial Neural Approach comparing the estimated compressive strengths based on NDT measured parameters with the same effective compressive strengths.The comparisons show the best performance of ANN approach.
基金Funded by the Program of Innovative Team of the Ministry of Education of China(No.IRT13089)the National Natural Science Foundation of China(No.51078307)
文摘The aim of this study is to provide the quantificational change laws of strength,stiffness,and deformation capacity of frost-damaged concrete relating to a united index,the data were obtained by different researchers.Then the index of relative compressive strength（RCS） was introduced as the indicator of frost damage and a large number of mechanical performance testing data of frost-damaged concrete were collected and analyzed.By curve fitting,the correlations between RCS and the initial elastic modulus,the strain at peak compressive stress,and biaxial compressive strength,and tensile strength,and the strain at peak tensile stress were established.Thereafter,the analytical stress-strain response of frost-damaged concrete under monotonic loading was presented using RCS and compared with that of the experimental data.Moreover,an isotropic elastoplastic damage model of frost-damaged concrete subjected to repeated loading was established.Finally,we can systematically estimate the effects of frost-damage on the mechanical performance of concrete,which can be provided for the numerical simulation of frost-damaged concrete structures.
基金supported by the National Natural Science Foundation of China (No.52374153 and No.52074349)the Fundamental Research Funds for the Central Universities of Central South University (No.2023zzts0726).
文摘Uniaxial compressive strength(UCS)of rock is an essential parameter in geotechnical engineering.Point load strength(PLS),P-wave velocity,and Schmidt hammer rebound number(SH)are more easily obtained than UCS and are extensively applied for the indirect estimation of UCS.This study collected 1080 datasets consisting of SH,P-wave velocity,PLS,and UCS.All datasets were integrated into three categories(sedimentary,igneous,and metamorphic rocks)according to lithology.Stacking models combined with tree-based models and linear regression were developed based on the datasets of three rock types.Model evaluation showed that the stacking model combined with random forest and linear regression was the optimal model for three rock types.UCS of metamorphic rocks was less predictable than that of sedimentary and igneous rocks.Nonetheless,the proposed stacking models can improve the predictive performance for UCS of metamorphic rocks.The developed predictive models can be applied to quickly predict UCS at engineering sites,which benefits the rapid and intelligent classification of rock masses.Moreover,the importance of SH,P-wave velocity,and PLS were analyzed for the estimation of UCS.SH was a reliable indicator for UCS evaluation across various rock types.P-wave velocity was a valid parameter for evaluating the UCS of igneous rocks,but it was not reliable for assessing the UCS of metamorphic rocks.
