Multi-objective reliability optimization design of high-speed heavy-duty gears based on APCK-SORA model

For high-speed heavy-duty gears in operation is prone to high tooth surface temperature rise and thus produce tooth surface gluing leading to transmission failure and other adverse effects,but in the gear optimization design and little consideration of thermal transmission errors and thermal resonance and other factors,while the conventional multi-objective optimization design methods are difficult to achieve the optimum of each objective.Based on this,the paper proposes a gear multi-objective reliability optimisation design method based on the APCK-SORA model.The PC-Kriging model and the adaptive k-means clustering method are combined to construct an adaptive reliability analysis method(APCK for short),which is then integrated with the SORA optimisation algorithm.The objective function is the lightweight of gear pair,the maximum overlap degree and the maximum anti-glue strength;the basic parameters of the gear and the sensitivity parameters affecting the thermal deformation and thermal resonance of the gear are used as design variables;the amount of thermal deformation and thermal resonance,as well as the contact strength of the tooth face and the bending strength of the tooth root are used as constraints;the optimisation results show that:the mass of the gear is reduced by 0.13kg,the degree of overlap is increased by 0.016 and the coefficient of safety against galling Compared with other methods,the proposed method is more efficient than the other methods in meeting the multi-objective reliability design requirements of lightweighting,ensuring smoothness and anti-galling capability of high-speed heavy-duty gears.

Reliable Space Pursuing for Reliability-based Design Optimization with Black-box Performance Functions

Reliability-based design optimization （RBDO） is intrinsically a double-loop procedure since it involves an overall optimization and an iterative reliability assessment at each search point. Due to the double-loop procedure, the computational expense of RBDO is normally very high. Current RBDO research focuses on problems with explicitly expressed performance functions and readily available gradients. This paper addresses a more challenging type of RBDO problem in which the performance functions are computation intensive. These computation intensive functions are often considered as a ＂black-box＂ and their gradients are not available or not reliable. On the basis of the reliable design space （RDS） concept proposed earlier by the authors, this paper proposes a Reliable Space Pursuing （RSP） approach, in which RDS is first identified and then gradually refined while optimization is performed. It fundamentally avoids the nested optimization and probabilistic assessment loop. Three well known RBDO problems from the literature are used for testing and demonstrating the effectiveness of the proposed RSP method.

Reliability Based Design Optimization of Aero-Engine Spindle Ball Bearings

Aero-engine spindle ball bearings work in harsh conditions which are affected by relatively complex stresses. One of the key factors which affects bearing performance is its structure. In this paper,we used reliability based design optimization method to solve the structure design problem of aero-engine spindle ball bearings.Compared with the optimization design method, the value of equivalent dynamic load using reliability optimization design method was the least by MATLAB simulation. Also the design solutions show that the optimized structure possesses higher reliability than the original solution.

Reliability design optimization of composite structures based on PSO together with FEA

The present work aims to develop a method for reliability-based optimum design of composite structures. A procedure combining particle swarm optimization （PSO） and finite element analysis （FEA） has been proposed. Numerical examples for the reliability design optimization （RDO） of a laminate and a composite cylindrical shell are worked out to demonstrate the effectiveness of the method. Then a design for composite pressure vessels is studied. The advantages and necessity of RDO over the conventional equi-strength design are addressed. Examples show that the proposed method has good stability and is efficient in dealing with the probabilistic optimal design of composite structures. It may serve as an effective tool to optimize other complicated structures with uncertainties.

Application of Conservative Surrogate to Reliability Based Vehicle Design for Crashworthiness

Surrogate models are commonly used for approximation of large computationally expensive vehicle crash simulation to facilitate rapid design space exploration and optimization. Unfortunately, the optimum design based on surrogates may turn out to be infeasible after running finite element crash simulation due to the surrogate errors. To meet this challenge, conservative strategy of surrogate modeling through compensating fitting errors was used for reliability based design optimization of vehicle structures for crashworthiness and weight reduction. The critical crash responses were constructed by unbiased kriging models, and conservative surrogates were obtained via adding safety margin to estimate the crash responses conservatively. The benefits of using conservative surrogates for reliability based design optimization were investigated in the context of constraint feasibility of the optimum designs through a mathematical example and a case study on vehicle crashworthiness design. The results demonstrate that optimization based on conservative surrogate helps to achieve the feasible optimum design, showing more attractive for reliability based design optimization in engineering applications.

THE OPTIMAL DESIGN BASED ON RELIABILITY OF WATER DISTRIBUTION SYSTEM BY LINEAR MODEL

In this paper, a new technique are developed for optimal design of water distribution system besed on reliability. It applies a linear programming algorithm to the optimal design based on reliability. Within a small optimal search step range,the objective function and constraints can be expressed in the first order Taylor-expanding form,and three sub-models (a steady-state simulation model, a reliability model and a linear optimization model) are linked each in optimal searches. Thus, a traditional non linear problem can be solved by a linear model, the computing burden is significantly decreased. Therefore, the linear optimal model developed by the paper has more practical significance.

A Polynomial Chaos Expansion Trust Region Method for Robust Optimization

Robust optimization is an approach for the design of a mechanical structure which takes into account the uncertainties of the design variables.It requires at each iteration the evaluation of some robust measures of the objective function and the constraints.In a previous work,the authors have proposed a method which efficiently generates a design of experiments with respect to the design variable uncertainties to compute the robust measures using the polynomial chaos expansion.This paper extends the proposed method to the case of the robust optimization.The generated design of experiments is used to build a surrogate model for the robust measures over a certain trust region.This leads to a trust region optimization method which only requires one evaluation of the design of experiments per iteration(single loop method).Unlike other single loop methods which are only based on a first order approximation of robust measure of the constraints and which does not handle a robust measure for the objective function,the proposed method can handle any approximation order and any choice for the robust measures.Some numerical experiments based on finite element functions are performed to show the efficiency of the method.