Identification and distribution of 13003 landslides in the northwest margin of Qinghai-Tibet Plateau based on human-computer interaction remote sensing interpretation

The periphery of the Qinghai-Tibet Plateau is renowned for its susceptibility to landslides.However,the northwestern margin of this region,characterised by limited human activities and challenging transportation,remains insufficiently explored concerning landslide occurrence and dispersion.With the planning and construction of the Xinjiang-Tibet Railway,a comprehensive investigation into disastrous landslides in this area is essential for effective disaster preparedness and mitigation strategies.By using the human-computer interaction interpretation approach,the authors established a landslide database encompassing 13003 landslides,collectively spanning an area of 3351.24 km^(2)(36°N-40°N,73°E-78°E).The database incorporates diverse topographical and environmental parameters,including regional elevation,slope angle,slope aspect,distance to faults,distance to roads,distance to rivers,annual precipitation,and stratum.The statistical characteristics of number and area of landslides,landslide number density(LND),and landslide area percentage(LAP)are analyzed.The authors found that a predominant concentration of landslide origins within high slope angle regions,with the highest incidence observed in intervals characterised by average slopes of 20°to 30°,maximum slope angle above 80°,along with orientations towards the north(N),northeast(NE),and southwest(SW).Additionally,elevations above 4.5 km,distance to rivers below 1 km,rainfall between 20-30 mm and 30-40 mm emerge as particularly susceptible to landslide development.The study area’s geological composition primarily comprises Mesozoic and Upper Paleozoic outcrops.Both fault and human engineering activities have different degrees of influence on landslide development.Furthermore,the significance of the landslide database,the relationship between landslide distribution and environmental factors,and the geometric and morphological characteristics of landslides are discussed.The landslide H/L ratios in the study area are mainly concentrated between 0.4 and 0.64.It means the landslides mobility in the region is relatively low,and the authors speculate that landslides in this region more possibly triggered by earthquakes or located in meizoseismal area.

Bioinspired Multifunctional Self-Sensing Actuated Gradient Hydrogel for Soft-Hard Robot Remote Interaction

The development of bioinspired gradient hydrogels with self-sensing actuated capabilities for remote interaction with soft-hard robots remains a challenging endeavor. Here, we propose a novel multifunctional self-sensing actuated gradient hydrogel that combines ultrafast actuation and high sensitivity for remote interaction with robotic hand. The gradient network structure, achieved through a wettability difference method involving the rapid precipitation of MoO_(2) nanosheets, introduces hydrophilic disparities between two sides within hydrogel. This distinctive approach bestows the hydrogel with ultrafast thermo-responsive actuation(21° s^(-1)) and enhanced photothermal efficiency(increase by 3.7 ℃ s^(-1) under 808 nm near-infrared). Moreover, the local cross-linking of sodium alginate with Ca^(2+) endows the hydrogel with programmable deformability and information display capabilities. Additionally, the hydrogel exhibits high sensitivity(gauge factor 3.94 within a wide strain range of 600%), fast response times(140 ms) and good cycling stability. Leveraging these exceptional properties, we incorporate the hydrogel into various soft actuators, including soft gripper, artificial iris, and bioinspired jellyfish, as well as wearable electronics capable of precise human motion and physiological signal detection. Furthermore, through the synergistic combination of remarkable actuation and sensitivity, we realize a self-sensing touch bioinspired tongue. Notably, by employing quantitative analysis of actuation-sensing, we realize remote interaction between soft-hard robot via the Internet of Things. The multifunctional self-sensing actuated gradient hydrogel presented in this study provides a new insight for advanced somatosensory materials, self-feedback intelligent soft robots and human–machine interactions.

Risk identification and safety assessment of human-computer interaction in integrated avionics based on STAMP

To solve the problem of risk identification and quantitative assessment for human-computer interaction(HCI)in complex avionics systems,an HCI safety analysis framework based on system-theoretical process analysis(STPA)and cognitive reliability and error analysis method(CREAM)is proposed.STPACREAM can identify unsafe control actions and find the causal path during the interaction of avionics systems and pilot with the help of formal verification tools automatically.The common performance conditions(CPC)of avionics systems in the aviation environment is established and a quantitative analysis of human failure is carried out.Taking the head-up display(HUD)system interaction process as an example,a case analysis is carried out,the layered safety control structure and formal model of the HUD interaction process are established.For the interactive behavior“Pilots approaching with HUD”,four unsafe control actions and35 causal scenarios are identified and the impact of common performance conditions at different levels on the pilot decision model are analyzed.The results show that HUD's HCI level gradually improves as the scores of CPC increase,and the quality of crew member cooperation and time sufficiency of the task is the key to its HCI.Through case analysis,it is shown that STPACREAM can quantitatively assess the hazards in HCI and identify the key factors that impact safety.

Dynamic constraint and objective generation approach for real-time train rescheduling model under human-computer interaction

Real-time train rescheduling plays a vital role in railway transportation as it is crucial for maintaining punctuality and reliability in rail operations.In this paper,we propose a rescheduling model that incorporates constraints and objectives generated through human-computer interaction.This approach ensures that the model is aligned with practical requirements and daily operational tasks while facilitating iterative train rescheduling.The dispatcher’s empirical knowledge is integrated into the train rescheduling process using a human-computer interaction framework.We introduce six interfaces to dynamically construct constraints and objectives that capture human intentions.By summarizing rescheduling rules,we devise a rule-based conflict detection-resolution heuristic algorithm to effectively solve the formulated model.A series of numerical experiments are presented,demonstrating strong performance across the entire system.Furthermore,theflexibility of rescheduling is enhanced through secondary analysis-driven solutions derived from the outcomes of humancomputer interactions in the previous step.This proposed interaction method complements existing literature on rescheduling methods involving human-computer interactions.It serves as a tool to aid dispatchers in identifying more feasible solutions in accordance with their empirical rescheduling strategies.

Reform of Human-Computer Interaction Course based on Mobile Application Interaction Design

With the popularity of new intelligent mobile devices in people’s lives,the development of mobile applications has paid increasing attention to the interactive experience of users.As the content of traditional Human-Computer Interaction(HCI)course and teaching material is out of date,it cannot meet the needs of mobile application interaction design and enterprises for students.Therefore,we need a new generation HCI course based on intelligent mobile devices to study the relationship between users and systems.The HCI course not only teaches students HCI theory and model,but also needs to cultivate students’interaction-oriented design practical ability.This paper proposes a set of HCI teaching material design and teaching methods for improving HCI class quality on mobile application interaction design,so as to make students more suitable for the employment requirements of enterprises.

Design and Implementation of the Image Interactive System Based on Human-Computer Interaction

Based on the traditional Human-Computer Interaction method which is mainly touch input system, the way of capturing the movement of people by using cameras is proposed. This is a convenient technique which can provide users more experience. In the article, a new way of detecting moving things is given on the basis of development of the image processing technique. The system architecture decides that the communication should be used between two different applications. After considered, named pipe is selected from many ways of communication to make sure that video is keeping in step with the movement from the analysis of the people moving. According to a large amount of data and principal knowledge, thinking of the need of actual project, a detailed system design and realization is finished. The system consists of three important modules: detecting of the people's movement, information transition between applications and video showing in step with people's movement. The article introduces the idea of each module and technique.

Approaches to Detecting Gene-Environment Interactions in Human Variation Using Genetic Engineering, Remote Sensing and GIS

Elucidation of the relationships between genetic polymorphisms and environmental exposures can provide insights into the pathways and mechanisms underlying complex traits. A new approach was used to detect G×E （gene-environment） interactions involved in human skin pigmentation variation to better understand the adaptive evolution of skin pigmentation. Specifically, we used genetic engineering, remote UVR （ultraviolet radiation） sensing and GIS （geographic information systems） to integrate the analysis of genetic and environmental factors into a coherent biological framework. Since we expected to generate large datasets for this multidimensional analysis, we used PCA （principal components analysis） as a spatial statistical analysis technique for analyzing the G×E interactions. The results suggest that skin pigmentation may be affected by mutations induced by UVR and support the hypothesis that global variation in skin pigmentation may be the result of localized adaptation to different UVR conditions via natural selection. Analyzing the relationships between heterozygous frequencies for SNP （single nucleotide polymorphism） loci and seasonal UVR levels as the environment changes will help elucidate the selective mechanisms involved in the UVR-induced evolution of skin pigmentation. Skin pigmentation fulfills the criteria for a successful evolutionary G×E interactions model.

A new analytical-numerical method for calculating interacting stresses of a multi-hole problem under both remote and arbitrary surface stresses

Based on the elementary solutions and new integral equations,a new analytical-numerical method is proposed to calculate the interacting stresses of multiple circular holes in an infinite elastic plate under both remote stresses and arbitrarily distributed stresses applied to the circular boundaries.The validity of this new analytical-numerical method is verified by the analytical solution of the bi-harmonic stress function method,the numerical solution of the finite element method,and the analytical-numerical solutions of the series expansion and Laurent series methods.Some numerical examples are presented to investigate the effects of the hole geometry parameters(radii and relative positions)and loading conditions(remote stresses and surface stresses)on the interacting tangential stresses and interacting stress concentration factors(SCFs).The results show that whether the interference effect is shielding(k<1)or amplifying(k>1)depends on the relative orientation of holes(α)and remote stresses(σ^∞x,σ^∞y).When the maximum principal stress is aligned with the connecting line of two-hole centers andσ^∞y<0.5σ^∞x,the plate containing two circular holes has greater stability than that containing one circular hole,and the smaller circular hole has greater stability than the bigger one.This new method not only has a simple formulation and high accuracy,but also has an advantage of wide applications over common analytical methods and analytical-numerical methods in calculating the interacting stresses of a multi-hole problem under both remote and arbitrary surface stresses.

Woven fabric triboelectric nanogenerators for human-computer interaction and physical health monitoring

Triboelectric nanogenerator(TENG)converts mechanical energy into valuable electrical energy,offering a solution for future energy needs.As an indispensable part of TENG,textile TENG(T-TENG)has incredible advantages in harvesting biomechanical energy and physiological signal monitoring.However,the application of T-TENG is restricted,partly because the fabric structure parameter and structure on T-TENG performance have not been fully exploited.This study comprehensively investigates the effect of weaving structure on fabric TENGs(F-TENGs)for direct-weaving yarn TENGs and post-coating fabric TENGs.For direct-weaving F-TENGs,a single-yarn TENG(Y-TENG)with a core-sheath structure is fabricated using conductive yarn as the core layer yarn and polytetrafluoroethylene(PTFE)filaments as the sheath yarn.Twelve fabrics with five different sets of parameters were designed and investigated.For post-coating F-TENGs,fabrics with weaving structures of plain,twill,satin,and reinforced twill were fabricated and coated with conductive silver paint.Overall,the twill F-TENGs have the best electrical outputs,followed by the satin F-TENGs and plain weave F-TENGs.Besides,the increase of the Y-TENG gap spacing was demonstrated to improve the electrical output performance.Moreover,T-TENGs are demonstrated for human-computer interaction and self-powered real-time monitoring.This systematic work provides guidance for the future T-TENG’s design.

Remote Learning in Higher Education During the Pandemic: A Study of the Experiences of Chinese International Students at United Kingdom and United States Universities in 2020/21

During the COVID-19 pandemic crisis,many universities around the world made a drastic change by transferring most of their offline classes to emergency remote learning(ERL).The aim of this study was to explore how Chinese students,who studied in United Kingdom(UK)and United States(US)universities during the 2020/21 academic year,perceive their experiences of remote learning.As the UK and the US have two relatively advanced education systems,the arrangements of their universities for ERL and their support for international students are worth exploring.Moreover,during the ERL,a portion of Chinese students had online classes in their home countries instead of the country in which their universities are located.Therefore,semi-structured interviews were carried out to explore the academic experiences and social interaction of students who studied in UK and US universities,while remaining in China.The data were analyzed using the thematic analysis method.The findings showed that ERL was perceived negatively by students despite its flexibility in areas of academic learning experiences and social interaction.

Research on Interactive Simulation Experiment Platform and Remote Simulation System Under Web Environment

This paper brings forward a method of experimental teaching reform of universities and colleges,which establishes an interactive simulation experiment platform with MATLAB simulation software.The platform uses visual man-machine interface,which avoids a lot of programming and debugging work,and improves students’learning enthusiasm.Simultaneously,it implements remote simulation based on JAVA under web environment,which is convenient for network teaching,and improves flexibility and practicability of the simulation experiment platform.

Virtual brain surgery simulation system based on haptic interaction

To improve the accuracy and interactivity of soft tissue delormatlon simulation, a new plate spring model based on physics is proposed. The model is parameterized and thus can be adapted to simulate different organs. Different soft tissues are modeled by changing the width, number of pieces, thickness, and length of a single plate spring. In this paper, the structural design, calcula- tion of soft tissue deformation and real-time feedback operations of our system are also introduced. To evaluate the feasibility of the system and validate the model, an experimental system of haptic in- teraction, in which users can use virtual hands to pull virtual brain tissues, is built using PHANTOM OMNI devices. Experimental results show that the proposed system is stable, accurate and promising for modeling instantaneous soft tissue deformation.

Multi-View Multi-Modal Head-Gaze Estimation for Advanced Indoor User Interaction

Gaze estimation is one of the most promising technologies for supporting indoor monitoring and interaction systems.However,previous gaze estimation techniques generally work only in a controlled laboratory environment because they require a number of high-resolution eye images.This makes them unsuitable for welfare and healthcare facilities with the following challenging characteristics:1)users’continuous movements,2)various lighting conditions,and 3)a limited amount of available data.To address these issues,we introduce a multi-view multi-modal head-gaze estimation system that translates the user’s head orientation into the gaze direction.The proposed system captures the user using multiple cameras with depth and infrared modalities to train more robust gaze estimators under the aforementioned conditions.To this end,we implemented a deep learning pipeline that can handle different types and combinations of data.The proposed system was evaluated using the data collected from 10 volunteer participants to analyze how the use of single/multiple cameras and modalities affect the performance of head-gaze estimators.Through various experiments,we found that 1)an infrared-modality provides more useful features than a depth-modality,2)multi-view multi-modal approaches provide better accuracy than singleview single-modal approaches,and 3)the proposed estimators achieve a high inference efficiency that can be used in real-time applications.

Empathic Responses of Behavioral-Synchronization in Human-Agent Interaction

Artificial entities,such as virtual agents,have become more pervasive.Their long-term presence among humans requires the virtual agent’s ability to express appropriate emotions to elicit the necessary empathy from the users.Affective empathy involves behavioral mimicry,a synchronized co-movement between dyadic pairs.However,the characteristics of such synchrony between humans and virtual agents remain unclear in empathic interactions.Our study evaluates the participant’s behavioral synchronization when a virtual agent exhibits an emotional expression congruent with the emotional context through facial expressions,behavioral gestures,and voice.Participants viewed an emotion-eliciting video stimulus(negative or positive)with a virtual agent.The participants then conversed with the virtual agent about the video,such as how the participant felt about the content.The virtual agent expressed emotions congruent with the video or neutral emotion during the dialog.The participants’facial expressions,such as the facial expressive intensity and facial muscle movement,were measured during the dialog using a camera.The results showed the participants’significant behavioral synchronization(i.e.,cosine similarity≥.05)in both the negative and positive emotion conditions,evident in the participant’s facial mimicry with the virtual agent.Additionally,the participants’facial expressions,both movement and intensity,were significantly stronger in the emotional virtual agent than in the neutral virtual agent.In particular,we found that the facial muscle intensity of AU45(Blink)is an effective index to assess the participant’s synchronization that differs by the individual’s empathic capability(low,mid,high).Based on the results,we suggest an appraisal criterion to provide empirical conditions to validate empathic interaction based on the facial expression measures.

Design of space-centered interaction using invisible and intangible spatial inputs

In this paper,we investigate methodologies to improve direct-touch interaction on invisible and intangible spatial input.We firstly discuss about the motive of looking for a new input method for whole body interaction and how it can be meaningful.We also describe the role that can play spatial interaction to improve the freedom of interaction for a user.We propose a method of spatial centered interaction using invisible and intangible spatial inputs.However,given their lack of tactile feedback and visual representation,direct touch interaction on such input can be confused.In order to make a step toward understanding causes and solutions for such phenomena,we made 2 user experiments.In the first one,we test 5 setups of helper that provide information of the location of the input by constraining the dimension it is located at.The results show that using marker on the ground and a relationship with the height of the user’s body improve significantly the locative task.In the second experiment,we create a dancing game using invisible and intangible spatial inputs and we stress the results obtained in the first experiment within this cognitively demanding context.Results show that the same setup of helper is still providing very good results in that context.

Research on the interaction design of somatosensory games——With the original game ＂Dream＂ in the center

The emergence of the somatosensory interactive technology has changed the ways of the interaction between the users and the computers, so that people can control the computers more freely. This paper focuses on the interactive design of the somatosensory games, and combines the Kinect interactive devices with the popular Unity 3D game engines, and analyzes and designs the realization principles of the somatosensory games, the somatosensory games and the digital somatosensory interactive display. Through the design and production of the original game ＂Dream＂, the author discusses the design methods of the game interactive experience while abandoning the traditional human-comouter interactive mode.

Designing interactive glazing through an engineering psychology approach:Six augmented reality scenarios that envision future car human-machine interface

Background With an increasing number of vehicles becoming autonomous,intelligent,and connected,paying attention to the future usage of car human-machine interface with these vehicles should become more relevant.Several studies have addressed car HMI but were less attentive to designing and implementing interactive glazing for every day(autonomous)driving contexts.Methods Reflecting on the literature,we describe an engineering psychology practice and the design of six novel future user scenarios,which envision the application of a specific set of augmented reality(AR)support user interactions.Additionally,we conduct evaluations on specific scenarios and experiential prototypes,which reveal that these AR scenarios aid the target user groups in experiencing a new type of interaction.The overall evaluation is positive with valuable assessment results and suggestions.Conclusions This study can interest applied psychology educators who aspire to teach how AR can be operationalized in a human-centered design process to students with minimal pre-existing expertise or minimal scientific knowledge in engineering psychology.

同伴面对面互动和远程互动中的学习者投入研究

本研究考察了同伴面对面互动和远程互动中的学习者投入。12名(6对)英语专业一年级学生在一学期中经历了同伴面对面互动和远程互动。通过分析他们的三次面对面互动和三次远程互动的录音文本,研究表明,在两类互动中,学习者在行为、认知和社会三个维度的投入并无显著差异。对8名学生的访谈结果显示,在情感投入方面,尽管学习者更加倾向于面对面互动,但同伴之间的配合没有因互动方式的改变而出现差异。上述结果表明,远程环境中的同伴互动效果与传统课堂环境中的同伴互动效果差别有限,这在一定程度上为开展远程互动提供了实证支撑。

远程互动教学模式在医学麻醉实践课程中的探索

传统医学实践课程存在学生学习参与度不高,缺乏跨学科教学合作等缺陷,因此,探索适应互联网时代的新型远程互动教学模式是大势所趋。麻醉学作为医学的重要组成部分,集中了生物医学、神经生物学、临床医学等多学科的理论和技术,以麻醉学实践课程为切入点,通过打造“校园-医院”学习共同体,在教学实践中融合以问题或病例为中心、情景模拟教学等多种教学方法,转变考核方式,培养学生的自主学习意识与创新精神,提高学生的综合素质,取得了良好的教学效果。

黄河下游典型悬河段地表水-地下水对湿地形成条件影响

对比分析黄河下游径流及河道变迁特征、不同时期地下水流场特征,结合遥感解译手段解析地下水和地表水对沿黄湿地条件的影响,为该区湿地生态修复提供理论依据。结果表明:(1)黄河下游典型悬河段人工湿地面积增幅较多,自然湿地仍呈萎缩趋势,滩涂湿地破碎度上升,生态环境稳定性较差。(2)地表水流量和水位整体呈现逐年降低的趋势,且河道的游荡摆动依然明显,直接影响了河流滩涂湿地面积及其稳定性。(3)研究区浅层地下水位十余年最大下降5 m、二十余年最大下降9 m。浅层地下水的持续下降导致北岸堤外湿地面积减少;南岸堤外因引黄水和退水侧渗形成新的背河洼地,湿地面积呈增长趋势,生态环境稳定性相对较好。地表水和地下水连通性较好,较低的地下水位将会削弱河道径流的作用,对沿黄湿地整体发展不利。(4)减少地下水的开采,确保引黄水量充足,对黄河大堤外背河洼地部位湿地的发展有利。