A Remote Real-Time Monitoring System for Power Quality

An introduction is made to the composition, design method and engineering application of a remote real time monitoring system of power quality in substations based on internet. With virtual instrument and network technique adopted, this system is characterized by good real time property, high reliability, plentiful functions, and so on. It also can be used to monitor the load of a substation, such as electric locomotives.

Stability and remote real-time monitoring of the slope slide body in the Luoshan mining area

Landslides have occurred frequently in the Luoshan mining area because of disordered mining.This paper discusses the landforms and physiognomy,hydro-meteorology,formation lithology,and geologic structure of the Luoshan mining area.It also describes the factors influencing the slope stability of landslide No.Ⅲ,determines the general parameters and typical section plane,analyzes the stress-strain state of the No.Ⅲ slope,and calculates its safety factors with FLAC3 D under saturated and natural conditions.Based on a stability analysis,a remote real-time monitoring system was applied to the No.Ⅲ slope,and these monitoring data were collected and analyzed.

Real-time prediction of mechanical behaviors of underwater shield tunnel structure using machine learning method based on structural health monitoring data

Predicting the mechanical behaviors of structure and perceiving the anomalies in advance are essential to ensuring the safe operation of infrastructures in the long run.In addition to the incomplete consideration of influencing factors,the prediction time scale of existing studies is rough.Therefore,this study focuses on the development of a real-time prediction model by coupling the spatio-temporal correlation with external load through autoencoder network(ATENet)based on structural health monitoring(SHM)data.An autoencoder mechanism is performed to acquire the high-level representation of raw monitoring data at different spatial positions,and the recurrent neural network is applied to understanding the temporal correlation from the time series.Then,the obtained temporal-spatial information is coupled with dynamic loads through a fully connected layer to predict structural performance in next 12 h.As a case study,the proposed model is formulated on the SHM data collected from a representative underwater shield tunnel.The robustness study is carried out to verify the reliability and the prediction capability of the proposed model.Finally,the ATENet model is compared with some typical models,and the results indicate that it has the best performance.ATENet model is of great value to predict the realtime evolution trend of tunnel structure.

Wireless remote spatiotemporal monitoring of high-fill foundation deformation

The spatial and temporal deformation patterns and deformation control indicators of highfill foundations directly affect the design,construction and operational safety of high-fill projects.In situ monitoring can comprehensively reflect the deformation of high-fill during and after construction.In this paper,we have first designed and installed an integrated wireless remote monitoring system for high-fill to achieve real-time dynamic monitoring of settlement,pore water pressure and soil pressure of the fill foundation.Based on the monitoring results of nearly one year of the construction period and two years after construction,it was found that the deformation amount and deformation rate of the high-fill foundation showed a non-linear growth relationship with the filling rate and filling height.The settlement deformation of the high-fill foundation during the loading period was mainly dominated by the original foundation soil,accounting for 54.4%of the total settlement on average;the settlement deformation during the post-construction period was mainly dominated by the filling body,accounting for 77.04%of the total settlement on average,and the settlement deformation during the post-construction period mainly occurred in the first year after construction.The analysis of the deformation mechanism suggests that the deformation of the filling body is dominated by exhaust consolidation during the loading period and drainage consolidation during the post-construction period;the deformation of the original foundation soil is dominated by drainage consolidation during the loading period and drainage consolidation develops slowly during the post-construction period.It is recommended that the original foundation should be reinforced before the large area filling construction,and that the filling rate should be strictly controlled during construction.The research results can provide a scientific basis for deformation calculation and stability assessment of high-fill foundations.

Towards Cache-Assisted Hierarchical Detection for Real-Time Health Data Monitoring in IoHT

Real-time health data monitoring is pivotal for bolstering road services’safety,intelligence,and efficiency within the Internet of Health Things(IoHT)framework.Yet,delays in data retrieval can markedly hinder the efficacy of big data awareness detection systems.We advocate for a collaborative caching approach involving edge devices and cloud networks to combat this.This strategy is devised to streamline the data retrieval path,subsequently diminishing network strain.Crafting an adept cache processing scheme poses its own set of challenges,especially given the transient nature of monitoring data and the imperative for swift data transmission,intertwined with resource allocation tactics.This paper unveils a novel mobile healthcare solution that harnesses the power of our collaborative caching approach,facilitating nuanced health monitoring via edge devices.The system capitalizes on cloud computing for intricate health data analytics,especially in pinpointing health anomalies.Given the dynamic locational shifts and possible connection disruptions,we have architected a hierarchical detection system,particularly during crises.This system caches data efficiently and incorporates a detection utility to assess data freshness and potential lag in response times.Furthermore,we introduce the Cache-Assisted Real-Time Detection(CARD)model,crafted to optimize utility.Addressing the inherent complexity of the NP-hard CARD model,we have championed a greedy algorithm as a solution.Simulations reveal that our collaborative caching technique markedly elevates the Cache Hit Ratio(CHR)and data freshness,outshining its contemporaneous benchmark algorithms.The empirical results underscore the strength and efficiency of our innovative IoHT-based health monitoring solution.To encapsulate,this paper tackles the nuances of real-time health data monitoring in the IoHT landscape,presenting a joint edge-cloud caching strategy paired with a hierarchical detection system.Our methodology yields enhanced cache efficiency and data freshness.The corroborative numerical data accentuates the feasibility and relevance of our model,casting a beacon for the future trajectory of real-time health data monitoring systems.

Doppler Radar Fault Judgment System and Remote Monitoring Platform

The Doppler weather radar fault judging system and remote monitoring platform were introduced.Through the real-time scanning of radar alarm information coding,the platform can realize dynamic monitoring and real-time alarm of Doppler radar equipment components,so as to improve the reliability of equipment operation,and truly realize"unattended"remote monitoring.

Pore-pressure and stress-coupled creep behavior in deep coal:Insights from real-time NMR analysis

Understanding the variations in microscopic pore-fracture structures(MPFS) during coal creep under pore pressure and stress coupling is crucial for coal mining and effective gas treatment. In this manuscript, a triaxial creep test on deep coal at various pore pressures using a test system that combines in-situ mechanical loading with real-time nuclear magnetic resonance(NMR) detection was conducted.Full-scale quantitative characterization, online real-time detection, and visualization of MPFS during coal creep influenced by pore pressure and stress coupling were performed using NMR and NMR imaging(NMRI) techniques. The results revealed that seepage pores and microfractures(SPM) undergo the most significant changes during coal creep, with creep failure gradually expanding from dense primary pore fractures. Pore pressure presence promotes MPFS development primarily by inhibiting SPM compression and encouraging adsorption pores(AP) to evolve into SPM. Coal enters the accelerated creep stage earlier at lower stress levels, resulting in more pronounced creep deformation. The connection between the micro and macro values was established, demonstrating that increased porosity at different pore pressures leads to a negative exponential decay of the viscosity coefficient. The Newton dashpot in the ideal viscoplastic body and the Burgers model was improved using NMR experimental results, and a creep model that considers pore pressure and stress coupling using variable-order fractional operators was developed. The model’s reasonableness was confirmed using creep experimental data. The damagestate adjustment factors ω and β were identified through a parameter sensitivity analysis to characterize the effect of pore pressure and stress coupling on the creep damage characteristics(size and degree of difficulty) of coal.

Semi-implantable device based on multiplexed microfilament electrode cluster for continuous monitoring of physiological ions

Modern medicine is increasingly interested in advanced sensors to detect and analyze biochemical indicators.Ion sensors based on potentiometric methods are a promising platform for monitoring physiological ions in biological subjects.Current semi-implantable devices are mainly based on single-parameter detection.Miniaturized semi-implantable electrodes for multiparameter sensing have more restrictions on the electrode size due to biocompatibility considerations,but reducing the electrode surface area could potentially limit electrode sensitivity.This study developed a semi-implantable device system comprising a multiplexed microfilament electrode cluster(MMEC)and a printed circuit board for real-time monitoring of intra-tissue K^(+),Ca^(2+),and Na^(+)concentrations.The electrode surface area was less important for the potentiometric sensing mechanism,suggesting the feasibility of using a tiny fiber-like electrode for potentiometric sensing.The MMEC device exhibited a broad linear response(K^(+):2–32 mmol/L;Ca^(2+):0.5–4 mmol/L;Na^(+):10–160 mmol/L),high sensitivity(about 20–45 mV/decade),temporal stability(>2weeks),and good selectivity(>80%)for the above ions.In vitro detection and in vivo subcutaneous and brain experiment results showed that the MMEC system exhibits good multi-ion monitoring performance in several complex environments.This work provides a platform for the continuous real-time monitoring of ion fluctuations in different situations and has implications for developing smart sensors to monitor human health.

Comprehensive and personalized approach is a critical area for developing remote cardiac rehabilitation programs

In the evolving landscape of cardiac rehabilitation(CR),adopting digital technologies,including synchronous/real-time digital interventions and smart applications,has emerged as a transformative approach.These technologies offer realtime health data access,continuous vital sign monitoring,and personalized educational enhanced patient self-management and engagement.Despite their potential benefits,challenges and limitations exist,necessitating careful consideration.Synchronous/real-time digital CR involves remote,two-way audiovisual communication,addressing issues of accessibility and promoting home-based interventions.Smart applications extend beyond traditional healthcare,providing real-time health data and fostering patient empowerment.Wearable devices and mobile apps enable continuous monitoring,tracking of rehabilitation outcomes,and facilitate lifestyle modifications crucial for cardiac health maintenance.As digital CR progresses,ensuring patient access,equitable implementation,and addressing the digital divide becomes paramount.Artificial intelligence holds promise in the early detection of cardiac events and tailoring patient-specific CR programs.However,challenges such as digital literacy,data privacy,and security must be addressed to ensure inclusive implementation.Moreover,the shift toward digital CR raises concerns about cost,safety,and potential depersonalization of therapeutic relationships.A transformative shift towards technologically enabled CR necessitates further research,focusing not only on technological advancements but also on customization to meet diverse patient needs.Overcoming challenges related to cost,safety,data security,and potential depersonalization is crucial for the widespread adoption of digital CR.Future studies should explore integrating moral values into digital therapeutic relationships and ensure that digital CR is accessible,equitable,and seamlessly integrated into routine cardiac care.Theoretical frameworks that accommodate the dynamic quality of real-time monitoring and feedback feature of digital CR interventions should be considered to guide intervention development.

Perspective of Chinese GF-1 high-resolution satellite data in agricultural remote sensing monitoring

High-resolution satellite data have been playing an important role in agricultural remote sensing monitoring. However, the major data sources of high-resolution images are not owned by China. The cost of large scale use of high resolution imagery data becomes prohibitive. In pace of the launch of the Chinese ＂High Resolution Earth Observation Systems＂, China is able to receive superb high-resolution remotely sensed images （GF series） that equalizes or even surpasses foreign similar satellites in respect of spatial resolution, scanning width and revisit period. This paper provides a perspective of using high resolution remote sensing data from satellite GF-1 for agriculture monitoring. It also assesses the applicability of GF-1 data for agricultural monitoring, and identifies potential applications from regional to national scales. GF-1＇s high resolution （i.e., 2 m/8 m）, high revisit cycle （i.e., 4 days）, and its visible and near-infrared （VNIR） spectral bands enable a continuous, efficient and effective agricultural dynamics monitoring. Thus, it has gradually substituted the foreign data sources for mapping crop planting areas, monitoring crop growth, estimating crop yield, monitoring natural disasters, and supporting precision and facility agriculture in China agricultural remote sensing monitoring system （CHARMS）. However, it is still at the initial stage of GF-1 data application in agricultural remote sensing monitoring. Advanced algorithms for estimating agronomic parameters and soil quality with GF-1 data need to be further investigated, especially for improving the performance of remote sensing monitoring in the fragmented landscapes. In addition, the thematic product series in terms of land cover, crop allocation, crop growth and production are required to be developed in association with other data sources at multiple spatial scales. Despite the advantages, the issues such as low spectrum resolution and image distortion associated with high spatial resolution and wide swath width, might pose challenges for GF-1 data applications and need to be addressed in future agricultural monitoring.

Progress and development on multi-parameters remote sensing application in earthquake monitoring in China

In this paper, the progress and development on remote sensing technology applied in earthquake monitoring research are summarized, such as differential interference synthetic aperture radar （D-InSAR）, infrared remote sensing, and seismo-ionospheric detecting. Many new monitoring data in this domain have been used, and new data processing methods have been developed to obtain high-precision images about crustal deformation, outgoing longwave radiation （OLR）, surface latent heat flux （SLHF）, and ionospheric parameters. The development in monitoring technology and data processing technique largely enriches earthquake research information and provides new tools for earthquake stereoscope monitoring system, especially on the space part. Finally, new developing trend in this area was introduced, and some key problems in future work were pointed out.

A wearable real-time telemonitoring electrocardiogram device compared with traditional Holter monitoring

Arrhythmias are very common in the healthy populations as well as patients with cardiovascular diseases.Among them,atrial fibrillation(AF)and malignant ventricular arrhythmias are usually associated with some clinical events.Early diagnosis of arrhythmias,particularly AF and ventricular arrhythmias,is very important for the treatment and prognosis of patients.Holter is a gold standard commonly recommended for noninvasive detection of paroxysmal arrhythmia.However,it has some shortcomings such as fixed detection timings,delayed report and inability of remote real-time detection.To deal with such problems,we designed and applied a new wearable 72-hour triple-lead H3-electrocardiogram(ECG)device with a remote cloud-based ECG platform and an expertsupporting system.In this study,31 patients were recruited and 24-hour synchronous ECG data by H3-ECG and Holter were recorded.In the H3-ECG group,ECG signals were transmitted using remote real-time modes,and confirmed reports were made by doctors in the remote expert-supporting system,while the traditional modes and detection systems were used in the Holter group.The results showed no significant differences between the two groups in 24-hour total heart rate(HR),averaged HR,maximum HR,minimum HR,premature atrial complexes(PACs)and premature ventricular complexes(PVCs)(P>0.05).The sensitivity and specificity of capture and remote automatic cardiac events detection of PACs,PVCs,and AF by H3-ECG were 93%and 99%,98%and 99%,94%and 98%,respectively.Therefore,the long-term limb triple-lead H3-ECG device can be utilized for domiciliary ECG self-monitoring and remote management of patients with common arrhythmia under medical supervision.

Construction of multi-factor identification model for real-time monitoring and early warning of mine water inrush

As a new technical means that can detect abnormal signs of water inrush in advance and give an early warning,the automatic monitoring and early warning of water inrush in mines has been widely valued in recent years.Due to the many factors affecting water inrush and the complicated water inrush mechanism,many factors close to water inrush may have precursory abnormal changes.At present,the existing monitoring and early warning system mainly uses a few monitoring indicators such as groundwater level,water influx,and temperature,and performs water inrush early warning through the abnormal change of a single factor.However,there are relatively few multi-factor comprehensive early warning identification models.Based on the analysis of the abnormal changes of precursor factors in multiple water inrush cases,11 measurable and effective indicators including groundwater flow field,hydrochemical field and temperature field are proposed.Finally,taking Hengyuan coal mine as an example,6 indicators with long-term monitoring data sequences were selected to establish a single-index hierarchical early-warning recognition model,a multi-factor linear recognition model,and a comprehensive intelligent early-warning recognition model.The results show that the correct rate of early warning can reach 95.2%.

Vegetation monitoring using diferent scale of remote sensing data

１ＩｎｔｒｏｄｕｃｔｉｏｎＬａｎｄｓｃａｐｅｓｔｒｕｃｔｕｒｅｗｉｔｈｉｎｔｈｅＭｕＵｓＤｅｓｅｒｔ，ａｓｅｍｉａｒｉｄｒｅｇｉｏｎｏｆｎｏｒｔｈｅａｓｔｅｒｎＣｈｉｎａ，ｉｓｔｈｅｂａｓｉｃｆｏｃｕｓｏｆｔｈｉｓｓｔｕｄｙｃｏｎｃｅｒｎｉｎｇｌａ...

A Multi-Interface Remote Monitoring and Control System Architecture Based on Embedded Server

This paper presents a multi-interface embedded server architecture for remote real-time monitoring system and distributed monitoring applications. In the scheme,an embedded microprocessor( LPC3250 from NXP) is chosen as the CPU of the embedded server with a linux operation system( OS) environment. The embedded server provides multiple interfaces for supporting various application scenarios. The whole network is based on local area network and adopts the Browser / Server( B / S) model. The monitoring and control node is as a browser endpoint and the remote node with an embedded server is as a server endpoint. Users can easily acquire various sensors information through writing Internet protocol address of remote node on the computer browser. Compared with client / server( C / S) mode,B / S model needs less maintain and can be applicable to large user group. In addition,a simple network management protocol( SNMP) is used for management of devices in Internet protocol( IP) networks. The results of the demonstration experiment show that the proposed system gives good support to manage the network from different user terminals and allows the users to better interact with the ambient environment.

Research on Remote Monitoring and Fault Diagnosis Technology of Numerical Control Machine

Based on the internet technology,it has become possible to complete remote monitoring and fault diagnosis for the numerical control machine.In order to capture the micro-shock signal induced by the incipient fault on the rotating parts,the reso- nance demodulation technology is utilized in the system.As a subsystem of the remote monitoring system,the embedded data acquisi- tion instrument not only integrates the demodulation board but also complete the collection and preprocess of monitoring data from different machines.Furthermore,through connecting to the internet,the data can be transferred to the remote diagnosis center and data reading and writing function can be finished in the database.At the same time,the problem of the IP address floating in the dial-up of web server is solved by the dynamic DNS technology.Finally,the remote diagnosis software developed on the Lab VIEW platform can analyze the monitoring data from manufacturing field.The research results have indicated that the equipment status can be monitored by the system effectively.

Road Vector Map Change Monitoring Based on High Resolution Remote Sensing Images

Some studies about road vector map change detection were done in this paper. Firstly, on the basis of old road vector data, the original high resolution remote sensing image was cut into segments. Then, gray analysis and edge extraction of those segments were done so that changes of roads could be detected. Finally, according to the vector data and gray information of roads which were not changed, road templates were extracted and saved automatically. This method was performed on the World View high resolution image of certain parts in the country. The detection result shows that detection correctness is 79.56% and completeness can reach 97.72%. Moreover, the extracted road templates are essentials for the template matching method of road extraction.

Product Maintenance Oriented Remote Monitoring and Diagnosis System

A research on maintenance oriented remote monitoring and diagnosis modular as well as the data transportation technique is carried out. An opened and modularized data share framework integrated with virtual graphic transportation is presented to realize the data exchange. As a result, it implements a real-time monitoring, diagnosis and maintenance system based on WWW. An effective support technique for the real-time remote fault diagnosis, maintenance and entire life cycle design of products is supplied.

Indication of the Expression of Transgene in Rice Plant Based on Hyperspectral Remote Sensing Technique Ⅱ——Growth Monitoring of Samples in the Contrast Experiment

Since the complication of monitoring and evaluating the problems about the transgenic expression and its impacts on the receptor in the transgenic crop breeding and other relevant evaluated works,the authors in the present work tried to assess the differences of spectral parameters of the transgenic rice in contrast with its parent group quantitatively and qualitatively,fulfilling the growth monitoring of the transgenic samples.The spectral parameters(spectral morphological characteristics and indices) chosen are highly related to internal or external stresses to the receipts,and thus could be applied as indicators of biophysical or biochemical processes changes of plant.By ASD portable field spectroradiometer with high-density probe,fine foliar spectra of 8 groups were obtained.By analyzing spectral angle and continuum removal,the spectral morphological differences and their locations of sample spectra were found which could be as auxiliary priori knowledge for quantitative analysis.By investigating spectral indices of the samples,the quantitative differences of spectra were revealed about foliar chlorophyll a+b and carotenoid content.In this study both the spectral differences between transgenic and parent groups and among transgenic groups were investigated.The results show that hyperspectral technique is promising and a helpful auxiliary tool in the study of monitoring the transgenic crop and other relevant researches.By this technique,quantitative and qualitative results of sample spectra could be provided as prior knowledge,as certain orientation,for laboratory professional advanced transgenic breeding study.

The future of remote ECG monitoring systems

监视系统的遥远的 ECG 为遥远的心脏监测器正在成为平凡医药设备。在最近的年里，监视系统的遥远的 ECG 在监视心疾病的各种各样的类型被使用了，并且 ECG 的传播和接收的质量在保留的遥远的过程期间发信号进展。然而，在那里留下伴随挑战。这份报告集中于监视系统的遥远的 ECG 的三个部件：病人(终端用户)，医生工作站，和遥远的服务器，在便携系统，在遥远的传播的包损失，便携式的 ECG 监视系统，耐心的 ECG 数据收集系统，和 ECG 上考察并且评估逼近的挑战包括即时处理表明传播圣片断， R 波浪， RR 间隔和 QRS 飘动，等等。这篇论文试着澄清未来 ECG 的发展策略遥远的监视，它能在指导监视的遥远的 ECG 的研究和发展是有用的。