In this research, the quality of the wastewater discharged into the environment has been investigated. The effluent from solar desalination pond contains large amounts of TDS (3.68 grams per liter) and TH (6.50 grams ...In this research, the quality of the wastewater discharged into the environment has been investigated. The effluent from solar desalination pond contains large amounts of TDS (3.68 grams per liter) and TH (6.50 grams per liter). Since the use of filter is not economical in this case, three types of commercial coagulants such as aluminum sulfate, ferric chloride and ferric sulfide have been used in this study. The main parameters such as effectiveness of three inorganic coagulants, ammonium sulfate, ferric sulfate, and ferric chloride, which separately help to remove hardness, have been studied. According to the results, using laboratory test, 25/g of ferric sulfate as coagulant is best coagulant mass and the ratio of 4 to 3 for auxiliary coagulant (sodium carbonate and sodium hydroxide) to coagulant will be best ratio. Also, the mixing rate of 120 rpm in the first reactor will give the best mixing speed. These conditions will lead to 0.348 grams per liter of TDS, 0.345 grams per liter of TH and 0.195 grams per liter of calcium hardness and 300 micro Siemens electrical conductivity of the purified sample.展开更多
Marine biofouling is a global problem that is detrimental to both moving ships and static underwater devices.Marine microorganisms tend to attach to any unprotected surface and grow into biofilm,which can be hardly re...Marine biofouling is a global problem that is detrimental to both moving ships and static underwater devices.Marine microorganisms tend to attach to any unprotected surface and grow into biofilm,which can be hardly removed even under high shear flow condition[1].With the long-term accumulation of marine organisms,ships suffer significantly from the increase on the net weight as well as the drag when cruising.Increased drag causes fuel power penalties of up to86%at cruising speed;it is notable even a very thin layer展开更多
文摘In this research, the quality of the wastewater discharged into the environment has been investigated. The effluent from solar desalination pond contains large amounts of TDS (3.68 grams per liter) and TH (6.50 grams per liter). Since the use of filter is not economical in this case, three types of commercial coagulants such as aluminum sulfate, ferric chloride and ferric sulfide have been used in this study. The main parameters such as effectiveness of three inorganic coagulants, ammonium sulfate, ferric sulfate, and ferric chloride, which separately help to remove hardness, have been studied. According to the results, using laboratory test, 25/g of ferric sulfate as coagulant is best coagulant mass and the ratio of 4 to 3 for auxiliary coagulant (sodium carbonate and sodium hydroxide) to coagulant will be best ratio. Also, the mixing rate of 120 rpm in the first reactor will give the best mixing speed. These conditions will lead to 0.348 grams per liter of TDS, 0.345 grams per liter of TH and 0.195 grams per liter of calcium hardness and 300 micro Siemens electrical conductivity of the purified sample.
基金supported by the U.S.National Science Foundation(Grant No.DMR-1410853)the faculty start-up fund at Wayne State University,Chemical Engineering and Materials Science
文摘Marine biofouling is a global problem that is detrimental to both moving ships and static underwater devices.Marine microorganisms tend to attach to any unprotected surface and grow into biofilm,which can be hardly removed even under high shear flow condition[1].With the long-term accumulation of marine organisms,ships suffer significantly from the increase on the net weight as well as the drag when cruising.Increased drag causes fuel power penalties of up to86%at cruising speed;it is notable even a very thin layer
